1) RMO Electrical and Mechanical services at MSO Building, New Delhi. 2) RMO Electrical and Mechanical services at Trade and Taxes Building, New Delhi (SH Miscellaneous electrical Works and SITC of Acrylic Sheet letter tray type Sign Board Writing

Supplying and fixing of PVC cable management system / wall trunking with cover of following sizes including internal, external, flat single cover and T- cover , end cap and other accessories on the wall so as to make complete etc as required. (a)50mm X 50mm

(b)100mm X 50mm

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. "Group C"

Rewiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable and 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable as earth wire in existing surface/ recessed steel conduit including dismantling as required. GROUP C

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. 3 x 1.5 sq. mm (Make-Polycab/Havells/RR Kabel/Finolex)

4.01) 3 x 4 sq. mm

4.02) 6 x 4 sq. mm

4.03) 3 x 6 sq. mm

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) a) 4 way (4 + 12), Double door

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) a) 12 way, Double door

Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A, tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer) as required. (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.) a) 8 way (4 + 24), Double door

Supplying and installation of Air Purifier with CADR of 650-700 m3/h, cover area of up to 1085 sq.ft/100 sq. mtr., advanced 4 stage filtration process through pre pre filter, nano-silver anti bacterial filter, H13 HEPA filter and activated carbon filter – removing up to 99.99% of pollutants, micro-allergens, airborne pollutants including smoke, dust, pollens, VOC (Volatile Organic Compounds), viruses and bacteria, real time PM2.5 level display to monitor air quality, equipped with UV LED technology to kill harmful bacteria, remote control using ALEXA & Wi-Fi, air purification cycle runs every 12 minutes, experience superior air quality with front & upward airflow technology, enhanced by 3D air flow, filter reset indicator alerts, child lock button, noise level of only 23dB/A, filter life of up to 9000 hrs or 1 Year, 2 Years Manufacturer Warranty, suitable to operate on single phase 240 Volts 50 HZ AC supply etc. complete with testing as required.

S.I.T.C. of 11 fins oil Filled type radiator (room heater) having 2900W, 3 heat setting with thermostat suitable for 230 V, 50 Hz, AC supply i/c connection, testing complete etc. as reqd.

S.I.T.C. of Carbon Room Heater having 800W setting with thermostat suitable for 230 V, 50 Hz, AC supply i/c connection, testing complete etc. as reqd.

SITC of Water Dispenser with Reverse Osmosis Purification & UV system designed to deliver Normal, Hot & Cold Purified Water through a 7 stage purification process with dimension of 978x318x380mm built with BPA free plastic (i.e. environmental friendly). The system should have in tank UV purification and its membrane should have a pore size of 0.0001 micron size which removes residual impurities and bacteria that cause various type of disease and deliver safe and crystal clear drinking water with following technical specifications : Weight : 28 kg No. of Faucets : 3 Nos. Cooling Tank Capacity : 8 Litre Heating Tank Capacity : 0.9 Litre Cooling Capacity : 6 Litre/ Hour Heating Capacity : 5 Litre/Hour Working Voltage range : 230V AC, 50 Hz,1 Phase Power Rating of Heater : 500 Watt Power Rating of compressor : 150 Watt Stages of Filtration : Pre Filter Sediment Filter Pre Carbon Filter RO Membrane Post carbon Filter in tank UV Purification UF Mineral Cartridge % of Recovery of Water : 35-40% Refrigerant : R134A (CFC free) Water Temperature : Cold : 7° C -13° C, Hot : 90° C

Replacement of defective by Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.(Make-Legrand/ABB/SCHEINDER/SEIMENS/LT) a) Single pole

12.01) Single pole and neutral

Replacement of defective box by Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess i/c dismantling the existing etc. as required a) 3 Module (100 mmX75 mm)

b) 6 Module (200 mmX75 mm)

c) 12 Module (200 mmX150 mm)

d) 8 Module (125mmX125mm)

Replacement of defective Switch/socket by Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. a) 5/6 A switch

14.01) 3 pin 5/6 A socket outlet

14.02) 15/16 A switch

14.03) 6 pin 15/16 amp socket outlet

Supplying & fixing 3.5 x 70 sqmm. P.V.C insulated XLPE Al. conductor armoured cable on the surface wall i/c connection testing etc. as required.

Supplying & fixing 4 x 25 sqmm. P.V.C insulated XLPE Aluminum conductor armoured cable on the surface wall i/c connection testing etc. as required.

Repair of ACP sheet based 3 dimensional LED glow sign 2 boards, changed all damaged items like 1.5 watt, 75 lumen, 100 mA LED module, 12 volt power supply Driver (water proof & Rain Proof) i/c connection/disconnection with 1.5 sqmm. Copper wire wiring & acrylic letters completely. 2 Nos. Sign Board fixed in MSO building of Size: Board size 70ft. X 15ft. = 1050 sqft& 12ft. X 3ft. = 36 sqft., Total = 1086 Sqft

SITC of S.S. sheet letters Tray type, & backside of 3mm Acrylic sheet letters Tray type with LED modules proper fixed at already fixed ACP sheet at front of PWD Headquarter main gate. Letter height 600 mm Letter Depth 75mm Writing Matter PWD HEADQUARTER LED board 12volt power supply PVC insulated 1.5 mm Copper wire All other items shall be as per approval of Engineer-in-charge.

Please Enable Macros to View BoQ information