Loading
Loading…
Loading…
| # | Company | Amount | Status |
|---|---|---|---|
| 1 | ₹25.4 Craccepted-aoc | ₹25.4 Cr | accepted-aoc |
Tender Value
Refer Docs
EMD Value
₹24.8 L
Closing Date
30 Jul 2026, 4:00 pmClosed
Karnataka Industrial Areas Development Board
Technical Assistant
Formation of Industrial Layout Including Formation of 15M Wide Roads Including Asphalting, Construction of RCC Side Drains, RCC Cross Drainage works & HDPE Water Supply Pipeline etc., at Kadechuru Industral Area, 2nd Phase sublayout Yadgiri Taluk, Yadgiri District.
KIADB/2026-27/OW/WORK_INDENT486
KIADB/2026-27/OW/WORK_INDENT486
Open
Other Works
Two Tender Document System(Two Cover)
KIADB Head Office Bangalore
3 documents required · 3 mandatory
To qualify for award of this contract, each Tenderer whether his name should have in the last five years period (2021-22 to 2025-26).The Tenderer should have Satisfactory completed (at least 90% of the contract value), prime contractor for at least one similar nature of work Formation of Layout Including Formation of Roads Including Asphalting, Construction of RCC Side Drains, RCC Cross Drainage works & HDPE Water Supply Pipeline work etc., as per the detailed scope of work mentioned in the relevant clauses of value not less than Rs.1237.50 lakhs.
Executed in any one financial year, the following minimum quantities of work: (Certificates of proof shall be enclosed from competent Authority not below the rank of Executive Engineer in Government/Public Sectors/Government Undertaking Organizations). (1) Earthwork Excavation & Embankment : 85195.00 cum. (2) Subgrade : 18844.00 cum. (3) DBM/BC/WMM/GSB : 15964.00 cum. (4) PCC/RCC : 3798.00 cum. (5) TMT Steel : 207.00 Tonne. (6) HDPE Pipe : 7328.00 Mtr.
Each Tenderer should further demonstrate: Availability by owning at least 50% of the required / specified key and critical equipment for this work. The remaining 50% can be deployed on lease / hire basis for all works provided, the relevant documents (commitment agreements etc.,) for availability for this work are furnished : (Furnish details of plant / machinery / equipment etc.,).
Tenderers who meet the above specified minimum qualifying criteria, will only be qualified, if their available tender capacity is more than the total tender value. The available tender capacity will be calculated as under: Assessed available tender capacity: (AxNx1.5 - B), where, A: Maximum value of Civil Engineering works executed in any one year during the last five years (updated to 2026-27 price level) taking into account the completed as well as works in progress. N: Number of years prescribed for completion of the works for which tenders are invited. B: Value, at 2026-27 price level, of existing commitments and on-going works to be completed during the next 11 Months
To qualify for award of this contract, each Tenderer whether his name should have in the last five years period (2021-22 to 2025-26).Achieved in at least two financial years a minimum financial turnover of Rs.4950.00 Lakhs. Civil Contract works).
Each Tenderer should further demonstrate:liquid assets and /or availability of credit facilities of not less than Rs.742.50 lakhs (Credit lines/ letter of credit/ certificates from Public sector banks/Nationalized Banks (as per RBI guidelines) not less than 30% of the amount put to tender for meeting the fund requirement etc).
₹7,500
₹24.8 L
9 Sept 2026
17 Jul 2026
31 Jul 2026
21 Jul 2026
23 Jul 2026
Formation of Industrial Layout Including Formation of 15M Wide Roads Including Asphalting, Construction of RCC Side Drains, RCC Cross Drainage works & HDPE Water Supply Pipeline etc., at Kadechuru Industral Area, 2nd Phase sublayout Yadgiri Taluk, Yadgiri District.
Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable ...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all
lifts and lead, transportation to site, spreading,...
Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to mee...
Gravel/ soil- Aggregates Base- construction of gravel/soil- aggregate based by providing well graded materials, speading in uniform layers with motor grader on prepared surface, mixing by mix in place...
Providing and laying a layer three dimensional honeycomb like cellular confinement system, STRATA WEB GEOCELL, made of ultrasonically-welded HDPE strips 1.6mm thick, which acts as subgrade/sub base im...
Construction of Granular Sub-Base of required grading as per design spreading in uniform layers with motor grader on prepared surface mixing by mix in place method with front end loader at OMC and com...
Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mx plant carriage of mixed Material...
Providing and applying primer coat with SS1 grade Bitumen Emulsion on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70 kg/m2 using mechanica...
Providing and laying Dense Graded Bituminous Macadam with 120 TPH capacity HMP batch type using crushed aggregates of specified grading, premixed with bituminous binder VG-30, @ 4.5 per cent by weight...
Providing and applying tack coat with RS1 Bituminous Emulsion using emulsion pressure distributor at the rate of 0.25 kg/m2 on Granular Surface. PWD R&B .complete with all lead and lift etc, as per sp...
Providing and laying Bituminous Concrete with 120 TPH capacity hot mix plant batch type using crushed aggregates of specified grading, premixed with bituminous binder VG-30, @ 5.4 per cent of mix and ...
Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC:67:2022 made of Class C Type XI retro reflective sheeting fixed over 2 mm thick aluminium sheeting vi...
Direction and Place Identification Signs upto 0.9 m2 Size Board. Providing and erecting direction and place identification retroreflectorised sign as per IRC:67:2022 made of high intensity grade shee...
Providing S&S RCC SPUN / VIBRATED CAST PIPES (REINFORCED)pipes NP-3 Class conforming to IS:458-1988 with latest amentments using ordinary portland cement, for sanitary works and conveying
to work site...
Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 g/m2 area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC...
Earth work excavation by manual means for drains,
canals, waste weir draft, approach channels, key
trench, foundation of Buildings & Bridges and such
similar works in all kinds of soils , as per drawi...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Reinforced cement concrete M15 grade boundary pillars of standard design as per IRC:25, fixed in position including finishing and lettering but excluding painting complete with all lead and lift etc,...
Printing new letter and figures of any shade with synthetic enamel paint black or any other approved colour to give an even shade complete with all lead and lift etc, as per specification and directio...
Marking of Road Boundary, Plot Boundary andOuter Boundary of Industrial Layout using Total Station Equipment including mobilization of necessary men and machinary complete as per the instruction of En...
Drain: Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant ...
Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...
Providing weep holes in Brick masonry/Plain/ Reinforced concrete abutment, wing wall/ return wall with PVC Pipe 110mm outer dia at 2 kg per m2, extending through the full width of the structure with s...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...
Inspection chamber: Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, bar...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...
Spur Culvert: Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricadi...
Earth work excavation by manual means for drains,
canals, waste weir draft, approach channels, key
trench, foundation of Buildings & Bridges and such
similar works in all kinds of soils , as per drawi...
Providing lime piles with all leads and lift of 1.5m for stabilising foundation after duly making 5cms dia holes to a depth of 1.2 to 1.5m at 0.5m/cc and filling with lime and tamping wherever require...
Providing and Filling in foundation with granite / trap
broken metal 100mm. and down size & with approved
sand including hand packing, ramming, watering,
including cost of all materials and labour wit...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works &other parallel works from 0.50m to 3.50 m height. Th...
Providing weep holes in Brick masonry/Plain/ Reinforced concrete abutment, wing wall/ return wall with PVC Pipe110mm outer dia at 2 kg per m2, extending through the full width of the structure with sl...
Filling available excavated earth (excluding rock)
in trenches, plinth, sides of foundations and other
similar works etc. in layers not exceeding 20cm in
depth, consolidating each deposited layer by r...
Water Supply: Earth work excavation for pipeline trenches in all kinds of soils by mechanical means above 600mm (Depth upto 1.50m not exceeding 1.5m in width ) trench width as per drawing and technica...
Providing, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and ...
Providing, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and ...
Providing bedding for the pipeline trenches in black cotton and rock reaches including watering and consolidation by punners etc complete with all lead and lift etc, as per specification and direction...
Providing and fixing DI Resilient seated soft sealing SLUICE VALVE of variouis dia. with body bonnet of Ductile Iron (DI) conforming ti IS-1865with the latest amendments and of grade GGG 40/50, shaft ...
Providing and fixing DI Resilient seated soft sealing SLUICE VALVE of variouis dia. with body bonnet of Ductile Iron (DI) conforming ti IS-1865with the latest amendments and of grade GGG 40/50, shaft ...
Providing & Fixing sluice valves/ Butterfly Valves (labour charges only)conforming to relvant ISS with latest amendments as detailed belowfor the following diameter and types with two Each of MJ colla...
Providing & Fixing sluice valves/ Butterfly Valves (labour charges only)conforming to relvant ISS with latest amendments as detailed belowfor the following diameter and types with two Each of MJ colla...
Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after
watering with a lead upto 50 m, and lift upto 1.5 ...
Valve chamber: Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricad...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Providing and laying in position Cement Concrete for all Foundation works.The granite/trap/basalt crushed graded coarse aggregates and fine aggregatesas per relevant IS Codes machine mixed with super ...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening,cutting, bending, hooking, laping/welding joints, tying...
Filling available excavated earth (excluding rock)
in trenches, plinth, sides of foundations and other
similar works etc. in layers not exceeding 20cm in
depth, consolidating each deposited layer by r...
Specials for water supply works complete with all lead and lift etc, as per specification and direction of Engineer in charge
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
Bid Document.pdf
Tender Document • 0.85 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .