Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹31.6 LAccepted-AOC | ₹31.6 L Quoted ₹31.8 L | L1 | Accepted-AOC Contract Awarded being Lowest Bidder |
| 2 | L2₹34.0 L+₹2.2 L (6.98%)Rejected-AOC | ₹34.0 L+₹2.2 L (6.98%) | L2 | Rejected-AOC Rejected due to Higher Amount Quoted |
| 3 | L3₹34.4 L+₹2.6 L (8.33%)Rejected-AOC 274 210 DAFNALA ROAD SHAHIBAUG AHMEDABAD GUJARAT 380009 | AHMADABAD | GUJARAT | 380009 | ₹34.4 L+₹2.6 L (8.33%) | L3 | Rejected-AOC Rejected due to Higher Amount Quoted |
| 4 | L4₹34.9 L+₹3.2 L (9.95%)Rejected-AOC C 347 ARBUDHA NAGAR ODHAV AHMEDABAD | AHMEDABAD | AHMEDABAD | GUJARAT | 382415 | ₹34.9 L+₹3.2 L (9.95%) | L4 | Rejected-AOC Rejected due to Higher Amount Quoted |
| 5 | L5₹35.9 L+₹4.2 L (13.1%)Rejected-AOC | ₹35.9 L+₹4.2 L (13.1%) | L5 | Rejected-AOC Rejected due to Higher Amount Quoted |
Tender Value
₹34 L
EMD Value
₹68,000
Closing Date
18 Dec 2024, 6:00 pmClosed
CWE AHMEDABAD
CWE AHMEDABAD
SPECIAL REPAIR TO APPROX 700 METER INTERNAL ROAD FROM RP GATE TO GUN SHED OF 244 MED REGT AT MIL STN DHARANGDHRA
2024_MES_686180_1
87334/E8
Open Tender
Civil Works - Roads
Item Rate
120 days
ARMY AREA DHRANGADHRA
Please refer Tender documents.
6 documents required · 6 mandatory
₹500
GE (A) GANDHINAGAR
₹68,000
Yes
3 Feb 2025
29 Nov 2024
20 Dec 2024
29 Nov 2024
18 Dec 2024
13 Dec 2024
Amount
Material & Labour for Repairs to pot holes any depth, not exceeding 1 sqm each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads,cutting around edges to at least 25 mm in depth making good by applying tack coat at 5 kg per 10 sqm putting in pre-mixed bituminous macadam well rammed and sealed with binder 9.8 kg per 10 sqm binder with 0.09 cum of stone chippings ,6.3mm size and again well rammed (including supply of premixed macadam, binder and chippings) depth of pot holes exceeding 30 mm all as specified and directed.
Material & Labour for preparing black top surfaces of roads by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc and applying evenly a priming/ tack coat with paving bitumen primer 80/100 ( VG-10 )grade at 5 Kg/10 Sqm complete all as specified and directed.
Material & Labour for Premix bituminous ,macadam using 4% Paving bitumen of any penetration laid /rolled and compacted to required gradient and camber (consolidated thickness 75mm or less) completed all as specified and directed .
Material and labour for preparing of black top surface of road by brushing with mechenical brooms and high presure jet for removing caked mud and applying evenly one priming coat of VG-10 grade paving bitumen at 2.5 kg per 10sqm by using mechenical sprayer complete all as specified and as directed.
Material and labour for Bituminous premix asphaltic semi dense concrete 30mm consolidated thickness with 5.5% binder content by weight by total mix ,using paving Bitumen 60/ 70 (VG 30) grade, laid by mechnical paver, rolled and compacted to required camber and gradient by 8-10 Ton Vibro Roller complete all as specified and as directed by Engineer-in-charge.
Material and labour for preparing the road side berms, removing vegetation, loose spoils, spreading average 75mm thick Moorum/ red bajri, filling in floors or pavings, laid in layers not exceeding 15cm thick, spread, levelled and rammed including watering complete all as specified and as directed.
Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete all as specified and as directed.
Material and Labour for preparation of new brick, stone ,concrete and asbestos cement or plaster surfaces and applying two coat of synthetic enemel (ordinary tint) over priming paint of any description over 10 cm girth or width not otherwise described complete all as specified and directed.
Material and labour for road line marking painting (Reflective) exc. 0.09m and n exc. 0.5m wide with thermoplastic component with reflective glass beads on bitumen road and laying with hot applied thermoplastic component 2.5mm thick including reflective glass beads @250 gm per sqm area, applied glass beads as per IRC 35. The finished surface are to be levelled uniformaly and free from sheaks and holes as per relevant clause of section 800. in addition where arrows or letter are to be provide thermoplastic compound may be hard sprayed. Contractor had to used approved make of paints, white and yellow color complete all as specified and as directed.
Taking down cat eye, solar cat eyes and tubular dealineator any type complete all as specified and as directed.
Supply and fixing cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of Model Number DA 972.0 fixed with and including mild steel stud of suitable size as per manufactures instructions complete all as specified and as directed.
Supply and fix solar cat eye alluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4 V/ 0.3 watt one NI-ed rechargeable battery (1.2 V/ 1600 MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufactures instructions complete all as specified and as directed.
Supply and fixing metal tubular delineator made out of ABS round body fitted with 2 Nos 65mm dia highly reflective reflectors made out of PMMA and mounted on 45mm/ 50 mm dia mild steel pipe of 600mm height duly powder coated and thermo plastic polyster elastomer 3 bands of Green, red and yellow reflector radium tape of 25mm wide strips with anti theft steel net for reflector protection including embeding in PCC 1:2:4 (150mm x 150mm x 300mm) type B1 complete all as specified and as directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided for.
Supply and fixing in repair retro reflective signage board sheets, one sided made up of 3mm thick ACP sheet face to be fully covered with high intensity encapsulated type heat actuvated retro reflective sheeting confirming to type IV of ASTM -D-4956-01 in blue or silver white colour or other colour combination including subject matter, message's, symbols, borders and Drg with high intensity grade as approved by Engr-in-charge, pasted on substrate by an adhesive backing and fixing the sheet with steel frame work with suitable size aluminium alloy rivets complete all as specified and as directed.
Supply and fix stainless steel pipe 50mm dia graded 202 medium as in frame work such as sign board/ railing all necessary welding, drilling or riveting, brackets, stopers and including embedding the same in PCC 1:3:6 type C-1 below ground level, size of PCC (450 X 450 X 600mm) including excavation in soft/ disintegrated rock complete all as specified and as directed.
Shree Builders (BID ID -3189717)
ALBA AC AND REF SERVICES (BID ID -3192626)
Navkar Enterprises (BID ID -3188280)
GIRNAR CONSTRUCTION (BID ID -3191980)
divyarsh entrprise (BID ID -3188926)
Priya Construction co. (BID ID -3189049)
ARTI CONSTRUCTION (BID ID -3192063)
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .