Annual Periodic renewal under performance incentive of PMGSY for the year 2020-2021 on Bharai to Bagan to Peej road Km. 0/0 to 7/855 SH Providing and laying 30mm thick bituminous concrete in Km. 0/0 to 4/0 and C/O PCC drain 400 mtrs. Length.

Amount

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing , rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming , stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density grading-3 as per technical specification clause 405 by manual means within all leads and lifts including carriage of materials and as per direction of Engineer-in- charge.

Providing and applying primer coat with bitumen emulsion(SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70-1.0(Zero point seventy - One point zero Kilogram / square metre using mechanical means as per technical specification clause 502 within all leads and lifts including carriage of materials and as per direction of Engineer-in- charge.

Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.25 to 0.30(Zero point twenty five to zero point thirty ) kilogram / Square metre on the prepared granular surfaces treated with primer & cleaned with Hydraulic broom as per Technical Specification Clause 503 within all leads and lifts including carriage of materials and as per direction of Engineer-in- charge.

Providing and laying 30 mm (Thirty millimetre ) thick bituminous concrete with 100-120 TPH batch type HMP (Hot Mix Plant ) producing an average output of 75 (Seventy five ) tonnes per hour using crushed aggregate of specified grading, premixed with bituminous binder @ 5.4 to 5.6 (Five point four to five point six ) percent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment , rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause No. 509 complete in all respect within all leads and lifts including carriage of materials and as per direction of Engineer-in- charge.

Construction of hill side drain in PCC grade M-10 in 1:3:6 (One cement : three sand: six graded/ crushed stone aggregate 20mm(Twenty millimetre) nominal size accordance with requirement of specification true to line and grades. Dimension and other particulars as per drawing and technical specification clause -1606.1.within all leads and lifts including carriage of materials and as per direction of Engineer-in- charge.

Providing and laying of hot applied thermoplastic compound 2.5mm(Two point five millimetre ) thick including reflectorising glass beads @ 250 gms (Two hundred fifty grams ) per square metre area thickness of 2.5 mm(Two point five millimetre ) is exclusive of surface applied glass beads as per IRC:35. The finished surface to be leveled uniform and free from streaks and holes within all leads and lifts including carriage of materials and as per direction of Engineer-in- charge.

Ashadeep Construction Pvt Ltd