Tender ID

CPPP

Active

Works

Electrical Works

Maintenance of Completed Schemes (M/o 1904 Mega Houses for 30 yrs.) at D-6, Vasant Kunj.

Delhi Development Authority

New Delhi, Delhi | Narmada, Gujarat

Amount: ₹21.7 LCloses: 2 Nov 20266d left

Tenderkart AI

Reads all tender documents

Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.

Timeline

Published27 Oct 2026
Closes2 Nov 2026
Bid Opening3 Nov 2026

Tender Value

₹21.7 L

EMD Value

₹43,342

Closing Date

2 Nov 2026, 3:00 pm6d left

Tender Inviting Organisation

Name

Executive Engineer, Elect.

Address

Electrical Division No. 6, Vasant kunj

Work Description

Supply, Replacement with Installation and Commissioning of 4 Meter and 3 Meter GI Circular Pole, LED light, Cable etc. at Narmada and Saraswati Blocks, Mega Housing D6, Vasant Kunj.

Tender Information

Tender ID

2026_DDA_931821_1

Reference Number

24/EE/ELD-6/DDA/NIT/2026-27

Tender Type

Open Tender

Product Category

Electrical Works

Form of Contract

Percentage

Period of Work

60 days

Location

As per tender documents

Source Website

Subscribe to view

Eligibility / Pre-Qualification

Please refer Tender documents.

Documents Required

11 documents required · 11 mandatory

Fee/PreQual/Technical

Requiredi) Scanned copy of Earnest Money deposited through the link https ifmis.dda.org.in (.pdf)

Requiredii) Scanned copy of payment of e-registration fee paid in CRB of DDA (.pdf)

Requirediii) Valid Enlistment Certificate in appropriate category (.pdf)

Requirediv) Certificate of Registration for/under GST Act and acknowledgment of up-to-date filed return, if (.pdf)

Requiredv) An undertaking on Rs.100/- non-judicial stamp paper under Article-4 Affidavit mentioning NIT No (.pdf)

Requiredvi) ESIC and EPF registration copy (.pdf)

Requiredvii) Valid Electrical license (.pdf)

Requiredviii) TDS certificates along with GST/ VAT and Service Tax return in case work experience is with pr (.pdf)

Requiredix) Corrigendum(s) to the tender uploaded before last date of submission of bid (if any). (.pdf)

Requiredx) Any other document as specified in the e-tender notice. (.pdf)

Finance

RequiredPrice (.xls)

Fee & Financial Details

Tender Fee Amount

₹0

EMD Fee Amount

₹43,342

Important Dates

Last Activity

27 Oct 2026

Published

27 Oct 2026

Bid Opening

3 Nov 2026

Download Starts

27 Oct 2026

Download Ends

2 Nov 2026

Submission Starts

27 Oct 2026

Bill of Quantities

PercentageBoQ_Ver3.0INR

This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.

BoQ1 (13 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Supplying, Replacement, Fabrication and Installation of following meter high GI circular pole made out of 65 mm dia NB, B class G.I pipe ISI marked duly welded with MS base plate of size 300 mm x 300 mm x 12 mm thick with stiffener of size 130 mm x 60 mm x 5 mm thick & with suitable earth stud on base plate and suitable arrangement for mounting the existing light fitting on the pole, with V-type MS Double Arm Bracket of 300 mm length, making suitable size hole in pole at a height of 2.5 meter from base plate for cable entry/exit, painting & numbering of pole, making suitable hole in base plate for cable entry/exit into the pole and fixing the pole on the existing foundation with the existing nuts-bolts, washers etc. complete as required including dismantling & removal of broken pole at site etc. Note : (i) Drawing of Pole along with foundation & complete accessories shall be submitted in the office & shall be approved from engineer-in-charge before SITC work. (ii) Make allowed for GI Pipe = Jindal (Hissar)/Surya Prakash/ Tata.
1.01	4 Meter GI Circular Pole	20	Each	7,201	₹1,44,020
1.02	3 Meter GI Circular Pole	9	Each	6,142	₹55,278
2	Providing and laying in position 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) Reinforced Cement Concrete (RCC) foundation of size 450 mm x 450 mm x 1200 mm deep (800 mm below ground level and 400 mm above ground level) i/c excavation of earth, refilling, providing, cutting, bending and placing in position, reinforcement of cold twisted bars of 12mm. dia-1200mm long (approx) 8 Nos, and reinforcement ring of cold twisted bar of 8mm dia -1400mm long (approx) -6 nos, (with suitable spacing) including centering & shuttering as required with providing, fixing and positioning of one set of foundation bolts comprising of 4 nos., 16 mm dia, 750 mm long J-Type MS bolts (Threaded portion shall be galvanized) along with 3 nos. GI nuts and 2 nos. GI washerers etc. per bolt and 1 no. anchor plate (3mm thick) of suitable size and providing 63 mm.(O.D) DWC pipe for cable entry & exit etc. complete as required including dismantling & removal of foundation at site etc.	29	Each	5,899	₹1,71,071
3	Supplying of 2 C X 16 sq.mm XLPE insulated PVC sheathed Aluminium conductor Armoured Power Cable of 1.1 kV grade as per IS:7098 (Part 1) including connections, fittings etc. complete as required. (Make Allowed - KEI /RR Kabel/ /Gloster/Grandlay/Finolex/National/Havells/Polycab)	1,300	Metre	312	₹4,05,600
4	Supplying and drawing 3 X 1.5 sq.mm FRLS PVC insulated copper conductor, single core cable in the existing surface/recessed steel/ PVC conduit as required. (Make Allowed - Polycab/KEI/RR Kabel/Havells/Bonton)	250	Metre	104	₹26,000
5	Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of Upto 35 sq. mm in the existing RCC/ HUME/METAL pipe as required.	1,300	Metre	47	₹61,100
6	Supplying , Fabrication and Installation of Wiremesh Protection Guard made out of 10 SWG MS Wiremesh suitable for existing 90 Watt LED light fitting as per approved by Engineer-in-charge etc. as reqd.	58	Each	1,073	₹62,234
7	Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface /recessed conduit submain wiring /cable as required	1,300	Metre	50	₹65,000
8	Supplying, Installation, Testing & Commissioning of 90 Watt LED Street light fixture, powder coated pressure die cast aluminium body (System lumen efficacy >135 lm/Watt) with built in or separate driver as per the requirement with Driver efficiency >85%, Input voltage: 140-270 Volt AC, frequency 50/60 hz, Operating temp range -5 0C to 50 0C, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, Driver efficiency >85%,THD < 10% as per IEC 61000-3-2, P. F.≥0.95, IP-66,IK-10, CRI >70, under voltage and over voltage protection, EMI-EMC as per CISPR-15, lenses for beam angle as per IESNA type I/II/III as per the width of the road and the project requirement., suitable to fit in up to 65mm dia pipe, life time (LED,Driver & electrical circuitary) of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin), SDCM(Standard Deviation Color Matching) <5, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard complete in all respect i/c external connections with 1.5 sq mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy >135 lm/Watt output . LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted.. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Make Allowed - Philips/Wipro/Surya/Havells/Bajaj)	58	Each	2,820	₹1,63,560

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.03 MB

NIT Documents

Tendernotice_1.pdf

PDF • 1.89 MB

Work Item Documents

etendernotice24.pdf

Tender Documents • 1.40 MB

BOQ_979218.xls

BOQ • 6.73 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Supplying, Replacement, Fabrication and Installation of following meter high GI circular pole made out of 65 mm dia NB, B class G.I pipe ISI marked duly welded with MS base plate of size 300 mm x 300 mm x 12 mm thick with stiffener of size 130 mm x 60 mm x 5 mm thick & with suitable earth stud on base plate and suitable arrangement for mounting the existing light fitting on the pole, with V-type MS Double Arm Bracket of 300 mm length, making suitable size hole in pole at a height of 2.5 meter from base plate for cable entry/exit, painting & numbering of pole, making suitable hole in base plate for cable entry/exit into the pole and fixing the pole on the existing foundation with the existing nuts-bolts, washers etc. complete as required including dismantling & removal of broken pole at site etc. Note : (i) Drawing of Pole along with foundation & complete accessories shall be submitted in the office & shall be approved from engineer-in-charge before SITC work. (ii) Make allowed for GI Pipe = Jindal (Hissar)/Surya Prakash/ Tata.
1.01	4 Meter GI Circular Pole	20	Each	7,201	₹1,44,020
1.02	3 Meter GI Circular Pole	9	Each	6,142	₹55,278
2	Providing and laying in position 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) Reinforced Cement Concrete (RCC) foundation of size 450 mm x 450 mm x 1200 mm deep (800 mm below ground level and 400 mm above ground level) i/c excavation of earth, refilling, providing, cutting, bending and placing in position, reinforcement of cold twisted bars of 12mm. dia-1200mm long (approx) 8 Nos, and reinforcement ring of cold twisted bar of 8mm dia -1400mm long (approx) -6 nos, (with suitable spacing) including centering & shuttering as required with providing, fixing and positioning of one set of foundation bolts comprising of 4 nos., 16 mm dia, 750 mm long J-Type MS bolts (Threaded portion shall be galvanized) along with 3 nos. GI nuts and 2 nos. GI washerers etc. per bolt and 1 no. anchor plate (3mm thick) of suitable size and providing 63 mm.(O.D) DWC pipe for cable entry & exit etc. complete as required including dismantling & removal of foundation at site etc.	29	Each	5,899	₹1,71,071
3	Supplying of 2 C X 16 sq.mm XLPE insulated PVC sheathed Aluminium conductor Armoured Power Cable of 1.1 kV grade as per IS:7098 (Part 1) including connections, fittings etc. complete as required. (Make Allowed - KEI /RR Kabel/ /Gloster/Grandlay/Finolex/National/Havells/Polycab)	1,300	Metre	312	₹4,05,600
4	Supplying and drawing 3 X 1.5 sq.mm FRLS PVC insulated copper conductor, single core cable in the existing surface/recessed steel/ PVC conduit as required. (Make Allowed - Polycab/KEI/RR Kabel/Havells/Bonton)	250	Metre	104	₹26,000
5	Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of Upto 35 sq. mm in the existing RCC/ HUME/METAL pipe as required.	1,300	Metre	47	₹61,100
6	Supplying , Fabrication and Installation of Wiremesh Protection Guard made out of 10 SWG MS Wiremesh suitable for existing 90 Watt LED light fitting as per approved by Engineer-in-charge etc. as reqd.	58	Each	1,073	₹62,234
7	Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface /recessed conduit submain wiring /cable as required	1,300	Metre	50	₹65,000
8	Supplying, Installation, Testing & Commissioning of 90 Watt LED Street light fixture, powder coated pressure die cast aluminium body (System lumen efficacy >135 lm/Watt) with built in or separate driver as per the requirement with Driver efficiency >85%, Input voltage: 140-270 Volt AC, frequency 50/60 hz, Operating temp range -5 0C to 50 0C, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, Driver efficiency >85%,THD < 10% as per IEC 61000-3-2, P. F.≥0.95, IP-66,IK-10, CRI >70, under voltage and over voltage protection, EMI-EMC as per CISPR-15, lenses for beam angle as per IESNA type I/II/III as per the width of the road and the project requirement., suitable to fit in up to 65mm dia pipe, life time (LED,Driver & electrical circuitary) of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin), SDCM(Standard Deviation Color Matching) <5, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard complete in all respect i/c external connections with 1.5 sq mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy >135 lm/Watt output . LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted.. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Make Allowed - Philips/Wipro/Surya/Havells/Bajaj)	58	Each	2,820	₹1,63,560

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

1Supplying, Replacement, Fabrication and Installation of following meter high GI circular pole made out of 65 mm dia NB, B class G.I pipe ISI marked duly welded with MS base plate of size 300 mm x 300 mm x 12 mm thick with stiffener of size 130 mm x 60 mm x 5 mm thick & with suitable earth stud on base plate and suitable arrangement for mounting the existing light fitting on the pole, with V-type MS Double Arm Bracket of 300 mm length, making suitable size hole in pole at a height of 2.5 meter from base plate for cable entry/exit, painting & numbering of pole, making suitable hole in base plate for cable entry/exit into the pole and fixing the pole on the existing foundation with the existing nuts-bolts, washers etc. complete as required including dismantling & removal of broken pole at site etc. Note : (i) Drawing of Pole along with foundation & complete accessories shall be submitted in the office & shall be approved from engineer-in-charge before SITC work. (ii) Make allowed for GI Pipe = Jindal (Hissar)/Surya Prakash/ Tata.

1.01

4 Meter GI Circular Pole

Each

7,201

₹1,44,020

1.02

3 Meter GI Circular Pole

Each

6,142

₹55,278

Providing and laying in position 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) Reinforced Cement Concrete (RCC) foundation of size 450 mm x 450 mm x 1200 mm deep (800 mm below ground level and 400 mm above ground level) i/c excavation of earth, refilling, providing, cutting, bending and placing in position, reinforcement of cold twisted bars of 12mm. dia-1200mm long (approx) 8 Nos, and reinforcement ring of cold twisted bar of 8mm dia -1400mm long (approx) -6 nos, (with suitable spacing) including centering & shuttering as required with providing, fixing and positioning of one set of foundation bolts comprising of 4 nos., 16 mm dia, 750 mm long J-Type MS bolts (Threaded portion shall be galvanized) along with 3 nos. GI nuts and 2 nos. GI washerers etc. per bolt and 1 no. anchor plate (3mm thick) of suitable size and providing 63 mm.(O.D) DWC pipe for cable entry & exit etc. complete as required including dismantling & removal of foundation at site etc.

Each

5,899

₹1,71,071

Supplying of 2 C X 16 sq.mm XLPE insulated PVC sheathed Aluminium conductor Armoured Power Cable of 1.1 kV grade as per IS:7098 (Part 1) including connections, fittings etc. complete as required. (Make Allowed - KEI /RR Kabel/ /Gloster/Grandlay/Finolex/National/Havells/Polycab)

1,300

Metre

312

₹4,05,600

Supplying and drawing 3 X 1.5 sq.mm FRLS PVC insulated copper conductor, single core cable in the existing surface/recessed steel/ PVC conduit as required. (Make Allowed - Polycab/KEI/RR Kabel/Havells/Bonton)

250

Metre

104

₹26,000

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of Upto 35 sq. mm in the existing RCC/ HUME/METAL pipe as required.

1,300

Metre

₹61,100

Supplying , Fabrication and Installation of Wiremesh Protection Guard made out of 10 SWG MS Wiremesh suitable for existing 90 Watt LED light fitting as per approved by Engineer-in-charge etc. as reqd.

Each

1,073

₹62,234

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface /recessed conduit submain wiring /cable as required

1,300

Metre

₹65,000

Supplying, Installation, Testing & Commissioning of 90 Watt LED Street light fixture, powder coated pressure die cast aluminium body (System lumen efficacy >135 lm/Watt) with built in or separate driver as per the requirement with Driver efficiency >85%, Input voltage: 140-270 Volt AC, frequency 50/60 hz, Operating temp range -5 0C to 50 0C, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, Driver efficiency >85%,THD < 10% as per IEC 61000-3-2, P. F.≥0.95, IP-66,IK-10, CRI >70, under voltage and over voltage protection, EMI-EMC as per CISPR-15, lenses for beam angle as per IESNA type I/II/III as per the width of the road and the project requirement., suitable to fit in up to 65mm dia pipe, life time (LED,Driver & electrical circuitary) of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin), SDCM(Standard Deviation Color Matching) <5, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard complete in all respect i/c external connections with 1.5 sq mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy >135 lm/Watt output . LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted.. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Make Allowed - Philips/Wipro/Surya/Havells/Bajaj)

Each

2,820

₹1,63,560