Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
Refer Docs
EMD Value
₹58,000
Closing Date
22 Oct 2025, 4:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
PD KREDA through DLPC
KREDA Kargil
Supply and Installation of Turbine Guide Vane with assembly alignment of machine including governor programming AVR programming automation synchronization of unit second with grid at SHP Chilong
2025_LAHDC_17754_1
08-KREDA of 2025
Open Tender
Miscellaneous Goods
Item Rate
35 days
Kargil
Please refer Tender documents.
2 documents required · 2 mandatory
₹200
AO to DC Kargil
₹58,000
14 Oct 2025
14 Oct 2025
22 Oct 2025
14 Oct 2025
22 Oct 2025
14 Oct 2025
Top Cover – The existing SS wear rings from the Top Cover shall be removed, and a new Stainless Steel wear ring shall be fixed and machined to the required size with 16 no’s bores for Guide Vanes.The eroded area of Top Cover shall be repaired by welding and machined to match the Runner outer diameter (for minimum clearance).
Bearing Carrier (For Top Cover)- New Manufacturing and installation of the New Bearing Carrier in the Top Cover.
Self-Lubricating Bushes & ‘O’ Rings (For Top Cover) – New Installation of new self-lubricating bushes and ‘O’ Rings in Top Cover.
Pivot Ring –The existing SS wear rings from the Pivot Ring shall be removed, and a new Stainless Steel wear ring shall be fixed and machined to the required size with 16 no’s bore for Guide Vanes.The eroded area of the Pivot Ring shall be repaired by welding and machined to match the Runner outer diameter (for minimum clearance).
Bearing Carrier (For Pivot Ring) – Manufacturing and installation of the New Bearing Carrier in the Pivot Ring.
Guide Vane -The Guide Vanes eroded profile (cavity) shall be filled by welding and matched properly with the template for a smooth profile.
Laybrinth Ring, Link, Lever, Cover plate, locking assembly, bushes, pin with Hradware & Orings, etc.
Governor proportional valve of OPU with a Connector to connect the governor command with the Oil Pumping Unit to control all Turbine operations in auto mode.
Locking Assembly (Runner) Runner Coating/Maintenance and Safety Cover.
Hydraulic Oil for hydraulic operation through OPU Tank
Turbine Generator Coupling (TG)
Gland Rope for Shaft Sealing of Turbine
High temprature Grease SKF
GV Transducer 24 VDC
LOS Pipe fitting
TG Bearing spacers and washers rings
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.49 MB
BOQ_43085.xls
BOQ • 0.31 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .