Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹13.5 LAccepted-AOC | ₹13.5 L | L1 | Accepted-AOC L1 |
Tender Value
₹14.1 L
EMD Value
₹28,105
Closing Date
13 Mar 2026, 3:00 pmClosed
Executive Engineer, Agri., North
O/o the EE(Agri), Dharmanagar,North Tripura
Construction of GCI roofing by GI truss at Chawmanu regulated Super Market at 2nd floor under PIA Chawmanu Agri Subdivision for the financial year 2025-26
2026_AGRI_71323_1
47 /EE/AGRI/ NORTH/2025-26
Open Tender
Civil Works
Percentage
30 days
Chawmanu, Dhalai Tripura
Please refer Tender documents.
7 documents required · 7 mandatory
₹1,000
₹28,105
O/o the EE(Agri), Dharmanagar,North Tripura
20 Jul 2026
7 Mar 2026
13 Mar 2026
7 Mar 2026
13 Mar 2026
7 Mar 2026
7 Mar 2026 - 12 Mar 2026
12 Mar 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Earth Work : | |||||
| 1.01 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and skirting courses, fillets, columns, pillars, piers, abutments, posts and struts etc. upto floor five level excluding cost of centring, shuttering, finishing and reinforcement- | 1 | cum | 13,305.8 | ₹13,292.49 |
| 1.02 | Centering shuttering including struttings, propping etc.and removal of form work for Columns, Pillars, Piers, Abutments, Posts and Struts with M.S. shutters | 1 | sqm | 647.4 | ₹646.75 |
| 1.03 | Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level | - | kg | 103.9 | - |
| 1.04 | Supply & installation of pre-painted Galvalume sheet for roofing/cladding (size, shape and pitch of corrugation as approved by Engineer-in-charge) in 550mpa steel grade, made out of Cold Rolled Steel coated with Zinc-Aluminium alloy coating of 43.5% Zn, 55% Al and 1.5% Silicon confirming to ASTM A792/A792M and AS1397, Alloy coating AZ150/AZ70, colour coated with high quality Polyester coating, top coated of modified polyester of 20 micron, back side coat of 5 micron, having epoxy primer coat of 5 micron on both side. Sheet should have protective guard film of 25 microns minimum to avoid scratches while transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in- charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55mm) with EPDM washers filled with white lead complete upto any pitch in horizontal/ vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required and as per direction of Engineer-in-charge | - | sqm | 818.1 | - |
| 1.05 | Supply & installation of pre-painted Galvalume sheet for roofing/cladding (size, shape and pitch of corrugation as approved by Engineer-in-charge) in 550mpa steel grade, made out of Cold Rolled Steel coated with Zinc-Aluminium alloy coating of 43.5% Zn, 55% Al and 1.5% Silicon confirming to ASTM A792/A792M and AS1397, Alloy coating AZ150/AZ70, colour coated with high quality Polyester coating, top coated of modified polyester of 20 micron, back side coat of 5 micron, having epoxy primer coat of 5 micron on both side. Sheet should have protective guard film of 25 microns minimum to avoid scratches while transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in- charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55mm) with EPDM washers filled with white lead complete upto any pitch in horizontal/ vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required and as per direction of Engineer-in-charge | 1 | sqm | 818.1 | ₹817.28 |
| 2 | Steel work in builtup tubular(round, square or rectangular hollow tubs etc) trusses etc. including cutting, hoisting, fixing in position and applying a priming coat of approved stell primer , includingwelding and bolted with special shaped washers etc. complete. | 0.4 | kg | 146.2 | ₹58.48 |
| 3 | Providing and fixing M.S. round holding down bolts with nuts and washer plates complete as per standard design | - | kg | 103.9 | - |
stage.html
html • 0.03 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_72577.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.35 MB
DNITChawmanu121.pdf
Tender Documents • 3.82 MB
BOQ_72577.xls
BOQ • 0.26 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .