REPAIRS TO SUNKON PORTION PLUMBING JOINERY AND SANITARY APPLIANCES IN OFFRS MD ACCN VIP BLDG ADM BLDG MESSES UNDER THE AREA OF AGE BR I ARMY CENTRAL IN ARMY AREA JODHPUR (8981/E8)

Amount

Demolition of cement concrete in ground floors and pavings n. exe 15 cm thickness (below or above ground level) complete all as specified & as directed.

M&L for 40mm thick plain cement concrete (1:2:4) type B1, (using 20mm graded stone aggregate) as in floor including finishing cement concrete surface even and smooth without using extra cement complete all as specified & as directed.

M & L PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in flooring,path , foundation etc complete all as specified and directed.

M&L 50mm thick PCC 1:3:6 type C-1 using 20 mm graded crushed stone aggregate as in plinth protection or similar places, without using extra cement complete all as specified and directed.

M & L chequred cement concrete tile 25 cm x 25 cm x 25 mm thick, set, jointed and pointed in neat cement slurry as in floor with grey cement and pigment over and including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 Grade complete all as directed

Supply only fine sand for interlocking paver blocks

S&F machine made precast cement concrete blocks (interlocking paves) of 60mm thick with 6mm top layers of ante abrasive material laid over 25mm thick sand cushion . The interlocking joints shall be filled with fine sand . The compressive strength of layer shall not be less than 350 Kg/Cm2 complete all as specified and directed.

S&F machine made precast cement concrete curb stone blocks using Cement concrete 1:3:6 type C2 (20mm stone agg) all as directed by Engr-in-Charge.

Demolition of stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified & as directed.

M&L PCC solid building blocks 10 Cm thick type B1 1:2:4 set in cement mortar (1:6) all as specified and directed.

M&L for squarred rubble walling Jodhpur type regular coursed well bonded ,bedded and solidly hearted built in cement mortar 1:6 complate all as specified and directed.

All as per item No 12 above but except stone complate all as specified and directed.

Extra over squared rubble stone walling Jodhpur type regular course for hammer dressing to face of stone with max depression on face from a straight edge not exc 20mm and dressing complete all as specified and directed.

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the out of MOD land complete all as specified and directed.

M&L for 20mm thick cement concrete type B-0 1:2:4 (using 12.5 mm graded crushed stone aggregate) use as a levelling course complete all as specified and as directed.

M&L for 15mm thick screed bed or bedding layer in CM 1:4 floor finished even & rough to recievr tiling/floor finish complete all as specified and directed.

M&L non skid ceramic colour joint free tiles(Ist quality) 6 to 7 mm thick of size area exc 0.11Sqm but nexc 0.18 Sqm in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed .

M&L for non-skid coloured ceremic tiles (ist Quality) joint less 7 to 8 mm thick area of each tiles exceeding 0.18 Sqm but n.exc. 0.38 sqm in floor etc set jointed in neat cement slurry and pointed in white or coloured cement to match the shade.including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

All as per above but skirting with 10 mm thick rendering in CM 1:4 complete all as directed.

M&L for glazed colour ceramic tiles of size 250x350x7mm, laid in vertical surface dado/skirting joint free etc, set and jointed in neat cement slurry and pointed in coloured tiles to match the shade of tiles complete all as specied and directed.

M&L for glazed colour ceramic tiles (ist Quality) of size 300x200x7mm, laid in vertical surface dado/skirting joint free etc, set and jointed in neat cement slurry and pointed in coloured tiles to match the shade of tiles complete all as specied and directed.

M & L Vitrified Ceramic tiles dark shed 10mm thick (Square / rectangular) polishbed , area of each tiles not exceeding 0.36 sqm in floors etc set and jointed in neat cement slurry and pointed in white or colured cement to match including 15 mm thick screed bed in cement mortar 1:4 complete all as specified and directed.

Ditto all as per item No.23 but in vertical surfaces including 10 mm thick rendering in cement mortar 1:4 complete all as specified and directed.

Taking down existing cement plaster including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L Rendering 10 mm thick CM (1:3) on concrete surfaces on ceiling / facia /RCC Chhaja etc all as directed & finished even & smooth complete all as specified & directed.

Supply & Fixing wire netting galvanised steel wire cloth 0.9 mm nominal dia and 12 mm mesh lathing and fixed to ceiling including all laps, cutting and waste fixed with nails on ceiling complete all as specified and directed.

M&L for 10mm thick rendering in CM 1:4 over stone masonary surfaces incl finishing the surface fair & rough to receive tiling etc complete all as specified and directed.

M&L for 15mm thick rendering in CM 1:6 finished even and smooth without extra cement on stone wall surface complete all as specified & directed.

Racking out joints/pointing to square rubble masonry Jodhpur type regular coursed built in cement mortar all as specified

M&L for Keyed pointing to square rubble masonry Jodhpur type regular course in CM 1:3 all as specified.

M & L three coats of white wash on newly plastered surface of wall including preparation of serfaces complete all as specified and directed..

M & L three coats of white wash on newly plastered surface of ceiling including preparation of serfaces complete all as specified and directed.

M/L two coat of colour wash on newly plastered/ unplastered surfaces over one coat of white wash on wall & including preparation complete all as specified and directed.

M & L one coats of white wash on old surface of wall complete all as specified and directed..

M & L one coats of white wash on old serface of ceiling complete all as specified and directed.

M&L one coat of colour wash on old surfaces including preparation complete all as specified & directed.

Complete removal existing preparing old decorated plastered or un-plastered surfaces of wall, pillasters, cornices etc by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spot and washing down with water including complete.

M & L two coat of cement base paint over a coat of white chalk on wall over a plaster/unplastered surfaces including preparation of surface complete.

M & L applying two coats of synthetic enamel paint on new wooden surfaces of any description over 10 cm width or girth over a coat of pink primer including preparation of surfaces complete all as specified and directed.

M & L applying one coats of synthetic enamel paint on old painted serface wooden surfaces of any description over 10 cm width or girth including preparation of surfaces complete.

M & L applying two coats of synthetic enamel paint on steel surfaces of any description over 10 cm width or girth over a coat of red oxide primer including preparation of surfaces completeall as specified and directed.

M & L applying one coats of synthetic enamel paint on old steel serface of any description over 10 cm width or girth including preparation of surfaces complete.

Taking down chowkhats or frames not exc 1.5 sqm each without taking off shutter from the frame complete all as specified and directed.

Taking down chowkhats or frame exc 1.5 Sqm but not exceeding 4 Sqm each without taking off shutter from the frame complete all as specified and directed.

Taking down shutter of any description, exc. 1 Sqm but n exc 2 Sqm each complete all as specified and directed.

S&F mild steel work as in doors frames using MS angle iron complete all as directed.

M & L for mild steel framed work as in brackets etc for coller stands etc framed steps/stairs etc complete using MS angle iron Steel bars gusset plate etc complete all as specified & directed .

Supply and fabrication of Mild steel guard bars and welded to window frames complete all as specified.

M &L for fabrication of pressed steel cupboard shutters using 1.00 mm thick MS plain sheet & with frame 1.25 MM thick bent to shape incl two coats of syn enamel paint on int surfaces & two coats of hammer tone finish on external surfaces alongwith locking arrangement mortice lock handle etc complete all as per drg no CEBZ/TD/12/2008 sht 1/3 to 3/3

S&F of 35mm thick factory made glazed and skeleton shutters, open rebated and prepared to receive wire gauze etc, edge of framing shall be plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc complete all as specified and directed.

S&F of 35mm thick 2nd class Hard wood paneled door shutter factory made (two panel) with lock rail andpanel of 9mm thick BWP commercial ply wood, the size of rail and stile is as per IS 1003 (Part-I), Kiln seasoned and chemically pressure treated.

S&F of factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made of MS tubes for top & bottom rail. MS frame shall be covered with heat moulded plain color pvc ‘C’ channel having a pvc sheet strip of 20mm width stuck inside with solvent cement for stiles and plain color pvc sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; paneling of plain colour PVC sheet to be fitted to the MS Frame/sealed to the stiles & rails with suitable PVC sheet beading, and joined 30mm thick (style) consisting of frame made of MS tubes for top & bottom rail. MS frame shall be covered with heat moulded plain color pvc ‘C’ channel having a pvc sheet strip of 20mm width stuck inside with solvent cement for stiles and plain color pvc sheets for top rail,lock rail & bottom rail on either side & as gap insert for top rail & bottom rail paneling of plain colour PVC sheet to be fitted the MS Frame/sealed to the stiles & rail with suitable PVC sheet beading, and joined together with solvent cement, all as specified.

M&L for solid PVC door frame of size 50x47mm made out of 5mm thick pvc sheet reinforced with MS square tube all as specified.

Taking down steel window/ventilator complete.

S&F of steel window with side hung shutter including box type hinges with steel handle, and steel peg stay, complete with glazing bars, with cooler opening, dovetailed or welded all as specified.

S&F of steel window with side hung shutter including box type hinges with steel handle, and steel peg stay, complete without glazing bars, with cooler opening, dovetailed or welded all as specified.

S&F of steel window with side hung shutter including box type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded all as specified.

S&F of steel window with side hung shutter including box type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded all as specified.

S&F of steel ventilator top hanging bars with box type hinges with steel handle, and steel peg stay, complete for glazing dovetailed or welded all as specified.

S&F of steel ventilator top hanging bars with box type hinges with steel handle, and steel peg stay, complete for gauze dovetailed or welded all as specified.

Repair to steel window including taking down, replacement of unserviceable hinging device box type , handles, making them in serviceable condition and re-fixing in same opening including making soffits and jambs in CM 1:4 complete all as directed of Engr in charge satesfacation.

S&F of aluminium anodized,tower bolt 200 mm long complete all as specified and directed.

S&F aluminum anodised handle extruded section of size 150mm long complete all as specified and directed.

S& F of aluminium alloy anodised sliding door bolt woth hasp and stalpe (bolt type and fixings clips of sheet cast or extruded sections and fixings bolts and sliding bolts of extruded sections and fixed 16mm dia and 300mm long complete all as specified and directed.

S & F butt hinges 100 mm long,extruded aluminium alloy with mild steel hinge pin anodised type C- 21 for PVC door complete all as specified and directed.

S & F of mild steel butt hinges 100 mm size complete all as specified and directed.

S & F in repair of mild steel butt hinges 100 mm size including welding fixed to frame complete all as specified and directed.

S & F 100mm size single action door spring hinge complete all as specified and directed.

S & F in repair 100mm size single action door spring hinge including welding fixed to framecomplete all as specified and directed.

S & F floor door stopper of alluminium alloy body and toungue anodised with hard drawn steel spring 140mm long complete all as specified and directed.

Hackilng out old broken glass (any thikness, size quality or description) from metel frame including punching or drilling cut old glazing pins & providing fixing new ones.

S&F of 4 mm thick pinheaded sheet glass panes of size not. exceeding 0.5 Sqm fixed with oil putty complete all as specified and directed.

S&F for 3 mm thick plain glass ordinary quality & glazing complete all as specified and directed.

S&F galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperature 1.00 mm complete all as specified and directed.

S&F in repair galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperature 1.00 mm complete all as specified and directed.

S&F in repiar galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperature 1.00 mm as in necessary weilding complete all as specified and directed.

M/L for PCC 1:2:4 type B1 Mix using 20mm graded stone aggregate as in hold fast iron fixing including necessary form work all as specified.

S&F flat iron for hold fast and similar work confirming to Fe-290 Gde-E-165 fixed with welding and necessary item complete all as specified and directed.

S&F in repair shelf of PTMT fixed with and including chromium plated brass screws and wooden cleats (Min weight 300 gms)

S&F in repair MS with decorative 25mm curtain rod with fixing brackets fancy type (As per sample kept in GE Office) etc as in repairs complete all as specified and directed.

S&F in repair soap dish of PTMT fixed with screws complete all as specified and directed.

S&F in repair PTMT towel rail 450 mm long fiexd to wall with chromium plated brass screws and woodn cleats Min weight 170gms approved make complete all as spcified and directed.

S&F in repair MS chromium plated peg set of five fixing with wall complete all as specified and directed.

S & F in repair Stainless steel sink ,1.00mm thick for kitchen or laboratory with plug ,washers waste pipe , cast iron cantilever brackets connecting union overall size 495mmx420mm with bowl size 410mm x 330mmx160mm complete all as specified & directed.

S&F as in repairs of vitreous china clay water closet squatting pan ORISSA Pattern size 580x 440 mm white with integral foot rest incl 'P' or 'S' traps, flush pipe of 32mm dia HDPE pipe etc all as specified & directed.

S & F as in repairs vitreous china wash down water closet European Type pedestal pattern with seat cover and jet spray complete incl fixing of flush pipe etc complete all as specified and directed.

S & F in repair Vitrous china wash basin as in repairs, white flat back size 550x400 mm including , waste pipe, MS brackets complete all as specified and directed.

Dismantling of cast iron or AC drain pipe/ PVC pipe jointed in cement mortar of size 110mm bore as directed

Dismantling of cast iron or AC drain pipe/ PVC pipe jointed in cement mortar of size 75mm bore as directed

S&F 100 mm dia Cast iron soil waste and vent pipes in any length with or without ears with cement joints laid in trenches or in floor complete all as specified and directed

S&F 75 mm dia Cast iron soil waste and vent sand cast pipes in any length with or without ears with cement joints laid in trenches or in floor complete all as specified and directed

S&F 100 mm dia Cast iron soil waste and vent sand cast pipes in any length with or without ears with cement joints fixed on wall complete all as specified and directed

S&F 75 mm dia Cast iron soil waste and vent sand cast pipes in any length with or without ears with cement joints fixed on wall complete all as specified and directed

S&F in repair 100 mm CI branch pieces single socketed Y equal or unequal complete all as specieied and directed.

S&F in repair 75 mm CI branch pieces single socketed Y equal or unequal complete all as specieied and directed.

S&F in repair 100mm CI bends any radius complete all as specified and directed

S&F in repair 75 mm dia CI bend with oval acess door fixed to pipe complete all as specified and directed.

S&F in repair 100mm dia CI vent cowl fixed to pipe complete all as specified and directed.

S&F in repair 75 mm dia CI vent cowl fixed to pipe complete all as specified and directed.

S&F in repair 75 mm dia CI floor trap plain grating including jointing with solvent cement 75mm dia

S&F in repair of PVC SWR gully trap 125/110 mm size including setting and jointing with solvent all as specified and directed.

S/F in repair of chromium plated shower rose 75mm dia round shape complete all as specified and directed.

S & F in repair 15 mm bore pillar taps, Cast Copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed.

S &F in repair 20 mm dia stop valves, cast copper alloy with screw down high pressure with crutch or butter fly handle screw both ends for iron pipe or for union & fixed of 25mm dia all as specified specified.

S &F in repair 25 mm dia stop valves, cast copper alloy with screw down high pressure with crutch or butter fly handle screw both ends for iron pipe or for union & fixed of 25mm dia all as specified specified.

S & F as in repairs 15 mm dia angular stop cock with chromium plated long thread with flange complete.

S& F as in repairs 15 mm dia stop cock regular body with adujstable wall flange with chromium plated with (concealed type) all as specified .

S&F in repair of bib, cock 15mm dia, cast copper alloy with crutch or butterfly handle, screwed for iron pipe all as spcified as fixed .

Supply & Fixing in repair low level flusing cistern PVC 10 ltrs capacity with float valves (ISI Marked) white with inlet ball valve including float and includign pvc connection complete all as specified and directed.

Taking down PVC low level flusing cistern from the wall and fixed the same opening after replace the flush bend complete all as specified and directed.

Demolation of existing RCC tank on roof and removing from site of capacity exceeding 300 litrs and not exceeding 500 litres and making good the disturbed surface by providing 100 mm thick plateform required size for water storage tank with PCC (1:2:4) type B-2 using 20 mm graded stone aggregate over roof slab and finishing exposed cement concrete surface with 15 mm thick plastering in CM 1:4 Complete all as specified and directed.

Dismantling water tanks of capacity exc 250 ltrs but.nexc 500 ltrs and removing to store all as specified.

S&F rotational moulded polythene water storage tanks triple layer (cylindrical vertical with closed top hoisted and fixed in position all as specified in SSR Part -I capacity of tank Make Syntex 500 ltrs white coloured including tank led cover complete with fixing arrangement complete all as specified and directed. Make Sintex/Rotex/Polytuff

S & F 20mm dia Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed complete all as specified and directed.

S & F in repair 20mm dia Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed complete all as specified and directed.

M&L 50 mm thick PCC (1:2:4)Type B-1 using 20 mm graded crushed stone aggregate for water tank plinth all as specified and directed.

Demiolition of reinforced cement concrete of as staircase, landing, chajjas and similar suspended work of any description and any position not otherwise

Providing precast RCC using 20mm graded aggregate as in cover slab for man hloes set in CM 1:6 complete all as specified and drected.

M&L for TMT bars 6 to 8mm dia and over, cut to length , bent to shape required including cranking, bending & binding with MS wire (annealed ) not less than 0.9mm dia or securing with clips, as in stirrups also & all as specified.

M&L in repair 5 cm thick sand stone slabs in sunshades, chajjas, shelves, cills, landings cover stones templates etc n exc 2m in length punched dressed on face and along exposed edges self faced on other side and set and pointed in cement mortar 1:4 thickness of slab complete all as specified and directed.

Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc laid, dry bedded complete all as specified and directed.

M & L 18 to 20 mm thick machine cut Kota stone slab flooring ,cooking plate from etc over screed bed base ,laid and jointed with grey cement slurry mixed with pigment to match with shade of slab including rubbing and polishing icluding 15 mm thick screed bed in cement mortor 1:6 complete all as specified and directed.

M & L 18 to 20 mm thick machine cut Kota stone in self and other places etc laid and jointed with grey cement slurry mixed with pigment to match with shade of slab including rubbing and polishing complete all as specified and directed.

S&F in repairs fancy type vitreous WHB oval type fixed to granite of bracket or erecting stand with waste pipe complete all as specified and directed.

M & L 18 to 20 mm thick granite(approved quality by user ) in WHB counter top etc laid in dry bedded in pinning to wall including cutting rubbing grinding and polishing to edges and rounding off granite polish slab for smooth finish complete.

Taking down existing water proofing treatment from floor in any thickness upto to exixting RCC/ stone slab and cleaning the surfaces by wire brushes scrubing down with water and removing the dust and debries etc to a distance n exc 500 m from the site of work direction by Engineer in charge.

M & L for the rendering 15 mm thick on reinforced cement concrete surfaces in cement mortar (1:4) mixed with water proofing treatment compound at the rate of 3% by weight of cement complete all as directed.

Supply only Water proofing compound approved quality .

M & L 75 mm thick plain cement concrete (1:2:4) type B1 using 20 mm graded stone aggregate to use in sub base sub floors laid in slpoe 1:40 the surface of RCC slab shall be made even and smooth using extra cement when the concrete is still green complete all as directed by Engineer in charge

M & L for applying one coat of cold applied bituminous primer @ 0.25 kg/Sqm shall be applied on plastered surfaces including side walls . Thereafter a layer of APP modified membrane 1.5 mm thick as specified above shall be laid by torch application method as per manufactures instructions including cushain layer of coarse sand thichness 25 mm shall be provided to protect membrane.

M & L for (1:5:10) lean cement concrete type E2 using 40 mm graded stone aggregate in mass concrete after carrying out satisfactory testing of CI pipes/ PVC pipe joints and slab/walls by filling water for 72 hourse. sunken portion of nahani/ floor trap and pipe joints shall be embedded in PCC 1:3:6 type C1 complete.

S & F 32 mm bore light grade galvanised shal be provided 30 cm beyond wall surface between to drain out leakage in if any. The mouth of GI pipe shall have greval to avoide chocking. Top of sunken portion of RCC slab to be finished such that its slope towards spout.

S & F continuous (PIANO) hinges, mild steel, bright finish or electrogalvanised, 30 mm width of flaps (when open) complete.

S & F in repair 18 / 19 mm thick pre-laminated particle board exterior grade, pre-laminated one side with decorative choice of lamination and other side balancing white lamination as in cup board shutter fixed with screw teak wood beading all round / exposed faces complete.

S & F PVC cupboard knob fixed with nut , screw and washer of mild steel bright finished size exc. 25 mm dia but n. exc. 50 mm dia (as per sample) complete all as specified and directed..

S & F 150 mm aluminium anodised hasp and staple complete.

S & F in repair 32 mm bore low density polythene pipe (LDPE) of pressure rating 6 kgf / Sqcm for WHB and sink complete all as specified and directed.

S & F in repair 40 mm bore low density polythene pipe (LDPE) of pressure rating 6 kgf / Sqcm for WHB and sink complete all as specified and directed.

M & L providing 35 mm thick pre-cast cement concrete 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in louvers & jallies (measured solid) including all mouldings and including pre-cast frames set in cement mortar 1:4 complete all as specified and as directed.

M & L providing precast concrete 1:2 :4 type B-1 using 20 mm graded stone aggregate in window or door cill lintal bressument steps quoin blocks (for use of masonery ) string course coping knelers string course coping kneelers apex stone . pier caps colum post boundery piller bed plates pintal block acnho rage blocks boundery ( for stone wall in ) corbles brackets etc of any section indicated) with plain fair face including chamfers weathering throating etc and setting in mortar 1:6 complete

S & F in repair 1000 Ltrs capacity rotational moulded polyethylene water storage tanks, triple layer (cylindrical vertical with closed top) hoisted and fixed in position, all as specified in SSR part I-1991, complete.Make :- Sintex/Rotex/Polytuff

M&L in repair for high quality looking mirror fancy type 5 mm thick with with round edge fixed to wall with chromium plated bolt area n exc 2.0 sqm complete all as specified and direction by Engr in charge nd as directed.

S&F in repairs EWC complete dual flush with seat cover elegance etc complete Make Johnson Cat P6107PW or equivalent

S&F in repairs white coloured WHB counter top ofsize 525x390mm including waste pipe all complete as directed of make Johnson Cat P5512PW or equivalent

S&F in repairs chromium plated 100mm dia shower with swivel joint of make Johnson Cat Part No S0005C or equivalent

S&F in repairs15mm bore centre hole Basin mixture chromium plated all complete of make Johnson Cat Part No JAZZ-T3117C or equivalent

S&F wall mixture chromium plated with bend pipe all complete of make Johnson Cat Part No JAZZ-T3121C or equivalent

S&F in repairs long nose pillar cock long threaded all complete as directed of make Johnson Cat Part No JAZZ-T3103C or equivalent

S&F in repaird bib cock15mm bore chromium plated of make Johnson Cat Part No JAZZ-T-3105C or equivalent

Taking down bush/plant in roof side, wall and any position in the existing bldg portion removing the all root on wall complete with the satisfication of Engr in charge and after removing the root the whole area of spray the acid in the and making good distrubed area with PCC/Plastering etc complete all as specified and directed.

M&L for Jodhpur rubbed stone slabs self faced 7.5cm to 10cm thick , 25cm to 35cm wide ,hoisted and set jointed and grouted in cm 1:3 complete all as directed

S & F in repair Bidet spray (Health faucet) with 1 meter PVC tube and holder, completed.

S & F as in repairs 15 mm dia two way bib cock with chromium plated long thread with flange complete all as specified and directed.

S & F in repair stainless steel kitchen plate rack of size 1000 mm x 1200 mm x 300 mm made out of 1 mm thick stainless steel sheet complete all as specified and directed..

S & F in repair stainless steel kitchen plate rack of size 900 mm x 600 mm x 300 mm made out of 1 mm thick stainless steel sheet complete all as specified and directed..

S & F in repair plastic water closet seat white closed pattern with flat bottom and cover and aluminium hinging device completeall as specified and directed.

S&F bath cabinet of PTMT fixed with and including chromium plated brass screws and wooden cleats size 355mmx455 all as specified and directed of make Prayag/Polytuff.

Dismantling steel work including doors, gates , raling stair case ladder, cooler stand, guard bar etc in any position but excluding framed truss etc complete all as specified and directed.

S&F mild steel frame work as in stairs ,hand rails half round or other stock section or section or core for wooden hand rail straidgt portion drilled and countershunk for balusters running bars for doors balusters nosing to steps including embeded in concrete and screwing etc hid ties for foof including securing bolts post and struts in fencing including securing bolts post and struts in fencing including cutting tops to shape as directed drilling holes nothing for wire etc flat iron fillet for necessary drilling boltinh or riveting etc snd similar work confirming to Fe 410-0 or fe 310-0

S & F 1mm thick mild steel , plain & corrugated sheet in wall cladding steel gates and similar work, cut of size holes punched including round headed screws, clout nail or rivets and fixed to wooden or steel framing with plain 40mm lap joints with riveted or welded seams including bending or turning up, mitred angle etc complete all as specifed and as directed

M&L for fixing 0.5mm thick aluminum sheet as in repairs cut and bented as required and fixed with screws at crumble joint complete all as directed

Taking down or up steel tubing and connection including cleaning for refixing or removal to store (a) 25 mm dia

(b) 20 mm dia

(c ) 15 mm dia

Fixing only GI of water tubing, medium grade, galvanized, with all fittings fixed to wall all as specified (a) 25 mm dia,

(b) 20 mm dia

(c ) 15 mm dia including cutting chases, pinning in & making good to disturbed portion to match the existing surface etc complete.

S & F of water tubing, medium grade, galvanized, with all fittings fixed to wall all as specified (a) 25 mm dia,

(b) 20 mm dia

(c ) 15 mm dia including cutting chases, pinning in & making good to disturbed portion to match the existing surface etc complete.

Materials and labour for preparing of old surfaces of walls and applying one coat of oil emulsion distemper on the same after complete removing the existing treatment and preparation of internal wall surfaces with minimum1mm thick oil putty and appying one coat of primer, complete all as specified and as directed.

Materials and labour for preparing of old surfaces of walls and applying two coat of oil emulsion paint (interior grade) on the same after complete removing the existing treatment and preparation of internal wall surfaces with minimum1mm thick oil putty and appying one coat of primer, all complete as specified and as directed.

Preparation of old surfaces by Brooming down or steel wire brushing, scrapping down moulds, moss and efflorescent salts and trading oil & greasy spots, to wall including cornices etc plaster or un- plastered surfaces (old decorated surface) and applying one coat of white wash on wall all as spd and as directed Engineer-in Charge.

M&L for preparation of old decorated surfaces plastered or unplastered on walls including cornices pilasters by brooming down or steel wire brushing, scraping down,smoke shoot,moulds,moss and efflorescent salts and trading oil and greasy spots and applying one coat of white wash on ceiling complete all as specified and directed by Engineer-in-Charge.

M & L preparation of old painted wooden surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint (FIRST QUALITY) of any tint all as spd and directed by Engr-in-Charges.

M &L preparation of old painted steel surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint (First quality) of any tint all as spd and directed by Engr-in-Charge.

Note for all above items:-All items in BOQ are for"Materials and labour /Supply and fix" and to be executed in "Repairs i.e incl takng down old items" unless otherwise specifically mentioned as "Supply only" or "fixing only" in BOQ. Contractors are requested to quote their rates accordingly.

M/s Chawariya Enterprises

mahalaxmi enterprises

ABHOG INFRASTRUCTURE PRIVATE LIMITED