C/o Jogni More to Gochra road km. 0/00 to 1/00 (SH- 5/7 mtr wide formation cutting road in Km. 0/206 to 0/251) VKVNY

Demolishing cement concrete manually/ by mechanical means including disposal of material complete in all respect including carriage of materials within all leads and lifts as per direction and satisfaction of Engineer-in-Charge.

Dismantling tile work with any thickness in floors and roofs laid in cement mortar including stacking material complete in all respect including carriage of materials within all leads and lifts as per direction and satisfaction of Engineer-in-Charge.

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (three hundred into three hundred millimetr) (thickness to specified by the manufacturer) of first quality conforming to IS : 15622 of approved make in colours such as white, lovery, gray, fume red brown, laid on 20mm (twenty millimetre) thick cement mortar 1:4 ( one cement : four coarse sand), jointing with gray cement slurry @ 3.3 Kg/sqm (at the rate of three point three kilogram per squaremetre) including pointing the joints with white cement and matching pigment etcetera complete within all leads, lifts carriage of material and other incidental complete in all respect as per direction and satisfaction of Engineer-in-Charge.

Providing and laying Vitrified tiles in 300x300mm (three hundred into three hundred millimetr) in size (thickness to be specified by manufacturer), with water absorption less than 0.08 % (zero point zero eight percent) and conforming to I.S. 15622, of approved make, in all colours and shade, in skirting, riser of steps, over 12 mm (twelve millimetre) thick bed of cement mortar 1:3 (one cement: three coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm (at the rate of three point three kilogram per squaremetre) including grouting the joint with white cement and matching pigments etcetera complete within all leads, lifts carriage of material and other incidental complete in all respect as per direction and satisfaction of Engineer-in-Charge.

Repairs to plaster of thickness 12 mm (twelve millimetre) to 20 mm (twenty millimetre) in patches of area 2.5 (two point five) squaremeters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, with cement mortar 1:4 (one cement : four fine sand) including carriage of material within all leads and lifts and other incidentals complete and as per the entire direction and satisfaction of Engineer-in-Charge.

Distempering one or more coats on old work with oil bound washable distemper of approved brand and manufacture to give an even shade complete in all respect including carriage of materials within all leads and lifts as per direction and satisfaction of Engineer-in-Charge.

Removing dry or oil bound distemper, water proofing cement paint and the like by washing and scraping and sand papering the wall surface smooth including necessary repairs to scratches complete within all leads, lifts, carriage of material and other incidental complete in all respect as per direction of Engineer-in-Charge.

Providing and applying white cement based putty of average thickness 1 mm (one millimetre) of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete within all leads, lifts, carriage of material and other incidental complete in all respect as per direction of Engineer-in-Charge.

Painting wood work with Deluxe Multi Surface Paint of required shade two or more coat applied @ 0.90 ltr/10 sqm (at the rate of zero point nine zero litre per ten square metre) over an under coat of primer applied @ 0.75 ltr/10 sqm (at the rate of zero point seven five litre per ten square metre) of approved brand and manufacture including carriage of material in all leads and lifts and other incidentals complete and as per the entire direction and satisfaction of Engineer-in-Charge.

Wall painting one or more coats on old work with plastic emulsion paint of approved brand and manufacture to give an even shade complete within all leads, lifts carriage of material and other incidental complete in all respect as per direction and satisfaction of Engineer-in-Charge.