PROVN OF WATER PIPELINE OF HQ PHANDHPI SUBAREA CAMPAREA AND 19XDESERTCOOLER FOR OTM ACCN OF AD REGT AND SPL REPAIR FOR IMPROVEMENT OF EXISTING DI GI PIPELINE IN OR GOVT MD ACCN NO P130 TO P141 P483 P488 OF AD REGT AT BANA SINGH LINE UNDER GE U AMBALA

Amount

Excavation in trenches not exc 1.50 mtr wide not exc 1.50 mtr deep in soft/loose soil for laying of pipe line and getting out complete all as specified and directed by Engineer-in-Charge.

Returning filling in, including spreading leveling, watering and well ramming in layers not exc 25 cm each complete all as specified and directed by Engineer-in-Charge.

Removal of excavated soil surplus to a distance n. exc. 50 mtr and depositing where directed at a level n. exc 1.5 mtr above the starting point complete all as specified and directed by Engineer-in-Charge.

Taking up/down corroded/unserviceable GI Pipes and connection from trenches including connected fittings/accessories complete of following sizes for replacing with new serviceable Pipes and removing the unserviceable Pipes from site all as directed by Engineer-in-Charge.

Description all as per Item No 4.00 here in before but 100 mm bore.

Description all as per Item No 4.00 here in before but 50 mm bore.

Description all as per Item No 4.00 here in before but 40 mm bore.

Description all as per Item No 4.00 here in before but 20 mm bore.

Supply and laying ductile iron Pipe, 100 mm dia, S/S, class K-9, ISI marked complete all as specified by Engineer-in-Charge.

Supply, laying & testing in trenches GI Pipe medium grade 80 mm dia ISI marked with all fittings complete all as specified.

Description all as per Item No 6.00 here in before but 50 mm bore.

Description all as per Item No 6.00 here in before but 40 mm bore.

Description all as per Item No 6.00 here in before but 25 mm bore.

Description all as per Item No 6.00 here in before but 20 mm bore.

Supply and fixing cast iron sluice valve PN-1.6 with flanged ends 150 mm nominal bore ISI marked complete with gun metal or stainless steel spindle and cast iron cap including rubber/fiber boared gasket nuts, washers etc including taking down old unserviceable sluice valves complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing gun metal gate valve ISI marked with iron wheel screwed down high pressure screwed both ends for iron pipe of size 80 mm bore including fixing nipple, union or fitting as per site requirement complete all as specified and directed by Engineer-in-Charge.

Description all as per Item No 12.00 here in before but 50 mm bore.

Description all as per Item No 12.00 here in before but 20 mm bore.

Taking out old/unserviceable float valve and supply & fixing PVC float valves high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule of 20mm bore complete all as specified and directed by Engineer-in-Charge.

Material and labour for rubber gasket(Tyton) joints suitable for 100 mm bore DI pipe and fittings including jointing material complete all as specified and directed by Engineer-in-Charge.

Supply and fixing cast iron fitting for spigot and socket /flanged pipe such as bends (any type radius and angle) tapers any type ( straight, bends, increasing, decreasing or double socket etc) Tee pieces single branch, 'Y' junction, double branch , cross collers , caps and plugs upto 100 mm bore complete all as directed by Engineer-in-Charge.

M&L for PCC 1:3:6 type C-2 using 40mm graded mechanically crushed stone aggregate as in bed of channel foundation filling /Panel bedding and mass concrete including necessary form work complete all as specified and as directed.

M & L broken stone or boulders hardcore of gauge n. exc. 63 cm, deposited, spread and levelled in layers n. exc. 15 cm thick, watered and rammed to a true surface all as specified and directed.

M & L 75 mm thick PCC 1:4:8 type D2 (using 40 mm graded crushed stone aggregate) as in path or against cutting of road etc including form work complete all as specified and directed by Engineer-in-Charge.

M & L for brick masonary valve pit of internal size 450x450x450 mm dimensions, one brick thick valve pit of following internal dimension with two Nos of RCC slab cover of suitable size with handle to lift atleast 75 mm thick having provision of valve key slot, earth work and PCC in foundation (1:3:6) Type C2 using 40 mm graded stone aggregete 150 mm thick including rendering 15 mm thick and two coat of white wash on exposed surfaces of external wall above ground level pit complete all as specified and directed by Engineer-in-Charge. Drawing No. -

Taking out steel tubing connection from trenches including connected fitting/accessories complete of 20-80 mm sizes including excavation, returning, filling and removal for also other than laid in the route of proposed pipe line to MES Store Yard complete all as specified and directed by the Engineer-in-Charge.

Supply & installation of desert coolers having nominal air flow capacity 4000 cum per hour of size 660 *X660 X 825 mm made out of PGI sheet not less than 0.90mm thick for fixed parts and not less than 0.70mm thick for front grills as approved..The desert coolers having copper wounded fan motor 480mm sweep, 1350-1400RPM, 230 Volt , 50 HZ with submersible water pump 18/20 watt for required flow of water including having three speed regulator (high / medium/ low) with and including provision of two coats of synthetic enamel anticorrosive oven dried paint over a coat of red oxcide primer complete all as specified and directed.

M & L for M S work fabrication from structual steel section including cutting, welding grounding and fixing in wall in any shape and angle iron size 40x40x5 mm for Desert Cooler stand.

M & L for point wiring with multistranded copper conductor cable, PVC insulated and unsheathed (FRLS) size 2.5 sqmm drawn in and incl PVC casing and caping with fixing accessories, to be fixed on wooden gutties or plastic rawal plug, for one light /fan point controlled by one switch with pressed steel concealed terminal boxes covered with 3 mm thick laminated sheet / modular plate incl continous earth wire of PVC insulated unsheathed multi stranded copper conductor cable size 2.5 Sqmm connected to common earth dolly, Including making good all disturbed work to match the existing colour, all as specified and directed .

S & F modular socket outlet 5/15 Amp flush type. Complete all as dierected by Engineer-in-Charge.

S & F modular switch piano type single pole one way 15 Amp. Complete all as dierected by Engineer-in-Charge.

Note:- Amount of credit schedule Rs.117930.00 for retrieved materials as mentioned in Schedule of Credit attached in tender documents in pdf form which will be deducted offline while acceptance of tender.

M/S M S BUILDER AND CONTRACTORS

M/S SINGHAL ENGINEERS

M/S HARCHARAN SINGH

JS CONSTRUCTION COMPANY