Repair/ renovation of Govt. Qtr. no. 14-C at Gandhi Nagar Jammu. CNO-690 NP

providing &fixing of ply 19mm thick ply including cutting wasteage fevicol carriage etc LMR for kitchen

providing &fixing of ply 6mm thick ply including cutting wasteage fevicol carriage etc complete item of superior make LMR

providing and fixing of 1mm thick sunmica including cutting ,wastage,fevicols nails etc.complete (LMR

providing and fixing of 0.85mm thick sunmica including cutting ,wastage,fevicols nails etc.complete (green,amulya,vigro) LMR

providing and fixing ACP sheet 4mm thick LMR

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately):2nd class D- wood

providing and fixing glazed shutter for doors,windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S pressed butt hinges finished of required size with necessary screws 30 mm second class deodar wood

Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge :Second class deodar wood : 30mm thick

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)

Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works detail:

Providing and fixing precoated galvanized iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, omplete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

12mm Cement plaster of mix: 1 : 6 ( 1 cement : 6 fine sand

Renewing glass panes, with wooden fillets wherever necessary 14.7.1Float glass panes of thickness 4.0 mm (weight not less than 10kg/sqm)

Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank

Providing and fixing of water proof flush door 34 mm with 1.0mm th. Sunmica (green, century or equivalent make) on both sides incl. lipping, paining, all accessories like hinges, tower bolts, lock(harrison, godrej) handle complete

providing and fixing cpvc pipes having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fitting. This includes jointing of pipes and fitting with one step CPVC Solvent cement and testing of joints complete as per direction of EIC Internal work exposed on wall including fixing the pipe with clamps at 1.00 mtr spacing 20 mm nominal outer dia pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge.20mm nominal dia pipes Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc. 20 mm nominal dia pipes

25mm nominal dia pipes

32mm nominal dia pipes

Providing and fixing gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels

providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing compound .1st layer of cement slurry,2nd layer of fibre cloth and third layer of cement slurry which allowed to air dried

Providing and laying matt finished vitrified tile of specified size having water absorption less than 0.5% and conforming to IS: 15622 of approved make in all colours and shades in outdoor floors such as footpath, court yard multi models etc., laid on 20mm thick base of cement mortar 1:4 (1cement: 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as direction of Engineer-in-Charge. 300x300x9.8 mm

Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete. In colour such as White, Ivory, Grey, Fume Red Brown (Khajaria, Somany double charged)

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. completeSize of tile 600x600 mm.

Providing and fixing on wall face un-plasticized Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion. 110 mm diametre

SS Multi purpose basket 15''x20''x4''

SS Multi purpose basket 15''20''x6''

SS Multi purpose basket 15''x20''x8''

SS Multi purpose basket 15''x20''x12''

SS masnal pullout 15''x18''x18''

SS Cuttlery basket 15''x20''x4''

SS Thali basket 15''x20''x18''

providing and fixing sliding channel

providing and fixing of edge tape

providing and fixing of Auto hinges

steel pawa 4''

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : Cement mortar 1:6 ( 1 cement : 6 coarse sand)

Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level

Dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meters lead. =no.*2(l+b)*H

"Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. (Khajaria, Somany)"

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade, one or more coats on old work.

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 1MM THICK PUTTY

2MM THICK PUTTY

Repairs to plaster of thickness 12mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 meters lead With cement mortar 1:4 (1 cement : 4 fine sand)

Distempering with 1st quality acrylic distemper, having VOC (Volatile Organic Compound) content less than 50 grams/ liter, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour.on old work

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per I.S. 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : depth 200mm

providing and fixing of PVC panelling on walls 8 to 10 mm thick inc, all fitting and fixtures complete (wall affair or any equvl. Make)

Providing and fixing WPC Panelling complete job

providing and fixing wall paper or required colour shade and design of standard make as directed by the EIC

providing and fixing of wall bend mixer of jaquar, cera or essco

providing and fixing of sink mixer of jaquar, cera or essco eq brand

providing and fixing of central hole basin mixer jaquar, cera or essco

providing and fixing of Short nose bib cock jaquar, cera or essco

providing and fixing of Long nose bib cock

providing and fixing of Angle valve jaquar, cera or essco

Providing and fixing magnetic catcher of approved quality in cupboard/ward robe shutters including fixing with necessary screws etc. complete.

providing and fixing of C.P gratings 4"

providing and fixing of Soap Dish holder jaquar, cera or essco

providing and fixing of Towel Ring Square jaquar, cera or essco

providing and fixing of Shower with arm jaquar, cera or essco

providing and fixing of health faucet jaquar, cera or essco

Providing and fixing 600x120x5mm glass shelf with edges round off supported on anodized aluminum angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs, etc. complete

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing Rectangular shape 453x357 mm

Providing and fixing toilet paper holder C.P. brass

Providing and fixing of one piece seat of jaquar, Cera, hindware,

SS Handels 12''

SS handels 8''

SS Handels 6"

SS Hinges 3''

SS Hinges 4''

Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings. Flat back wash basin of size 630x450 mm.

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings

Providing and fixing of Cubical Tuffen Glass partition. 6'x6'

engaging unskilled labour for clearance of site

Engage carpenter for repair work

Engaging welder including the cost of welding set and helper for mislaneous welding works at site

engage trolley for shifting of mulba froim site to outer area of municipality