Installation of 08 Nos Fire Extinguisher cum Bucket holding stand in respect of Sayal-D Colliery.

Amount

Providing GI Pipe Complete fitting 50mm dia Nominal Bore Height 2x6 ½ ‘ = 4 Mtr Width 3x5’ = 5 Mtr 4x1 ½ ‘ = 2 Mtr

Providing and fixing 1mm thick M.S. sheet garage door with frames of 40x40x6mm angle iron, 3mm M.S. gusset plates at junctions and corners, all necessary fittings complete including applying a priming coat of approved steel primer: Using M.S. angles 40x40x6mm for diagonals braces. Size 2(5’x 3’) = 1.40 Sqmtr

With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works for GI Pipe (2x22/7 x 1.2x0.05x11) = 4.14 Sqm for MS Angle (2x1.76 Sqmtr) = 3.52 Sqm MS Plate 2(5’x3’) = 1.40 Sqmt 9.06 Sqmtr

Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete On steel work for GI Pipe (2x22/7 x 1.2x0.05x11) = 4.14 Sqm for MS Angle (2x1.76 Sqmtr) = 3.52 Sqm MS Plate 2(5’x3’) = 1.40 Sqmt 9.06 Sqmtr

Excavation work by mechanical means (Hydraulic excavator) / manual means in foundation trenchesor drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50 m.2(0.45 x 0.45 x 0.75) = 0.30 cum

PCC for Jamming / Fixing Pole 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) 2(x0.45 x 0.45 x 0.75) = 0.30 cum

Fire Bucket Capacity – 07 Ltr

Total impact of GST for the purpose of CTC

M/S DK ENTERPRISES

M/S RUMY TRADERS