Loading…
Loading…
Tender Value
₹18.3 L
EMD Value
₹18,300
Closing Date
30 Jun 2026, 6:00 pm5d left
Similar tender results from the same govt authority in the past 3 years.
Executive Engineer, Electrical (R&B) Division, Valsad
Renovation to Street Light at Railway over bridge at Railway fatak no. 133 at Maroli, Dist. Navsari.
316296
Online Tender Notice No. 03 of 2026-27
Open
Electrical Works
Valsad
7 documents required · 7 mandatory
₹900
Executive Engineer, Electrical (Rand B) Division, Valsad
₹18,300
21 Jun 2026
21 Jun 2026
21 Jun 2026
30 Jun 2026
21 Jun 2026
Name of Renovation to Street Light at Railway over bridge at Railway fatak no. 133 at Maroli, Dist.
work : Navsari.
Qnty. Item Description Per Rs in Words Amount
1 1503 Replacing old & u/s by Supplying and erecting Flexible Mtr. 46.46 Rupees Forty
PVC insulated multi strand multi core 1.1 kv grade ISI Six And
marked copper wires of following size to be erected as Paise Forty
directed. (e) 1.50 Sq.mm 3 core round PVC sheathed. Six Only
2 173 Replacing old & u/s by Supplying and erecting LED Ea. 6,566.01 Rupees Six
street light / Flood light fittings with High power White Thousand
LEDs wattage of 3 Watt and above assembled on single Five
MCPCB, efficiency more than 130 lm/w and corrosion Hundred
free High pressure die cast aluminum housing with Sixty Six
smooth finish powder coated and heat sink extruded And Paise
aluminium with diffuser and Polycarbonate optics/ One Only
lenses, with toughened glass with company mark/name
engraved or embossed 160 to 270 V,Power Factor more
than 0.95, THD < 10 %, CCT 3000 K to
5700K,Uniformity ratio >0.45, Luminaire efficacy>
lumens/watt . LED driver efficiency > 85 %.( fittings
required LM-79 & LM-80 certificates)(NOTE: Below
description have shown ranges of Wattage capacity of
LED fittings.The Engineer incharge may select any
wattage capacity between the ranges shown.) (A) Street
Light (IP-65), Surge protection -4KV integral and ,Light
must have 440VAC line supply with over-voltage
protection. (iv) above 90 to 120 watts Cat.III (Replacing-
157, Providing-16)
3 38 (B) Flood Light (IP-65), Surge protection -4KV integral Ea. 7,266.95 Rupees
and ,Light must have 440VAC line supply with over- Seven
voltage protection. (iv) above 90 to 120 watts Cat.III Thousand
(Replacing- 22, Providing-16) Two
4 6 (B) Flood Light (IP-65), Surge protection -4KV integral Ea. 9,647.52 Hundred
and ,Light must have 440VAC line supply with over- Thousand
voltage protection. (vi) above 160 to 200 watts Cat.III Six Hundred
(Providing) Forty Seven
5 2 Replacing old & u/s by Providing and erecting Ea. 6,173.12 Rupees Six
Approved make Four pole moulded case circuit breaker Thousand
having breaking capacity ICU of 25 KA. at 415 One Hundred
V,having normal current rating up to 25 A to 100A. Seventy
with Fixed thermal & magnetic release suitable to work Three And
on A.C. supply 50 c/s. with all internal connections, Paise Twelve
spreader tinned copper & complete erected in existing Only
16 G.M.S. housing. ICS=100% of ICU only, Cat III
6 60 Replacing old & u/s by providing and erecting Ea. 270.68 Rupees Two
Miniature circuit breaker single pole 0.5A to 2A system Hundred
and having breaking capacity 10 KA to be erected in Seventy And
existing box. confirming to IS 8828/1996 with ISI Mark Paise Sixty
Cat.III Eight Only
7 12 Providing and erecting Annealed bare Copper wire 8 to Kg. 794.87 Rupees
8 4 Replacing old & u/s Providing and erecting Pipe type Ea. 368.65 Rupees
earthing having 150 cms.long and 2.5 cms. dia. Three
galvanised iron pipe with coupling and buch buried in Hundred
specially prepared earth pit complete with necessary 8 Sixty Eight
SWG earth wire. And Paise
Qnty. Item Description Per Rs in Words Amount
9 4 For using salt and charcoal / coke as required for pipe Ea. 171.70 Rupees One
type earthing. Hundred
10 180 Replacing old & u/s by Providing and erecting XLPE Mtr. 126.25 Rupees One
(IS:7098)(I)-88 ISI armoured cable multistrand / Solid Hundred
Aluminium conductor for 1.1 KV. to be laid on wall Twenty Six
with necessary clamps or in existing trench / pipe of And Paise
following size of cables (B) 4 core 6 Sq. mm. Twenty Five
11 80 Making trench in soft soil of suitable width of 90 cm Mtr. 55.55 Rupees Fifty
deep for laying cable or locating the fault all over the Five And
run and back filling the same and making the surface as Paise Fifty
normal ground. Five Only
12 160 Replacing old & u/s Providing & laying approved make Mtr. 62.62 Rupees Sixty
Double walled corrugated pipes (DWC) of Two And
polyethylene(conforming to IS 14930 II )with necessary Paise Sixty
connecting accessories of same material at required Two Only
depth in existing trench for laying of cable. below
ground / road surface for enclosing cable (A)50 mm
13 816 Solder less crimping type Aluminium lugs conforming Ea. 6.06 Rupees Six
to IS suitable for cable of following size evenly crimped And Paise
with high pressure tool & connected to switchgear Six Only
terminals with brass/cadmium plated nut bolts in an
approved manner. (A) 1.5/ 2.5/4/6 Sq.mm
14 102 Replacing old & u/s Providing and fixing Terminal Ea. 146.45 Rupees One
board of size 5.0 x 127 x 152.4 mm.bakelite sheet with Hundred
suitable brass studs with nuts, washers and clamps of Forty Six
size 25mm x 3mm suitable for pole painted with one And Paise
coat of red lead paint. Forty Five
15 4 Replacing old & u/s by Supplying & erecting approved Ea. 515.10 Rupees Five
make SMC press moulded composite FRP. loop-in, Hundred
loop-out approx. 2mm thick box complete with Bakelite Fifteen And
connector strip 5way(3P+N+E),DIN rail for mounting Paise Ten
mob & hinged doors as per requirement having locking Only
arrangements with mounting clamp with nuts, bolts &
washers suitable for erection on pole with cable
clamps& earth bolt of following size of box. (B) 250mm
x 200mm x 100mm [deep]
16 12 Replacing old & u/s by Providing and erecting Street Ea. 683.77 Rupees Six
Light pole bracket comprising main B Class GI pipe of Hundred
4.2 cm/require outside dia. complete with suitable B Eighty Three
Class G.I. sleeve tubing of approx. 45cms.length and And Paise
suitable for 76.5 mm /80mm / required size of pole top Seventy
having sufficient fasteners for fixing the brackets and Seven Only
having spread of 1.5.mtr. length with 110 deg.with
vertical plane & suitable welded stays, reducer and with
check nuts complete painted with one coat of Red oxide
/ PU base primer and two coats of Aluminium / PU
paint. paint with following nos of arms. [A] Single Arm
Bracket 1.5 Mtr
17 2 [C] Triple Arm Bracket 1.5 Mtr (Providing) Ea. 1,331.18 Rupees One
Qnty. Item Description Per Rs in Words Amount
18 6 Replacing old & u/s by Supplying & erecting approved Ea. 3,168.37 Rupees
make Digital time switch having lithium cell 6 years Three
operative and operate battery backup 1 channel day Thousand
clock with 14 memory programme, suitable to operate One Hundred
on 240V + 5%, 16A with, floating contacts Minimum Sixty Eight
switching setup time 1 minimum & LCD display. Also And Paise
comprised permanent ON/OFF switching. Programming Thirty Seven
switches & housed in fire proof thermoplastic enclosure Only
& transparent cover erected as required with necessary
connection erected as directed.
19 6 Replacing old & u/s by Supplying & erecting power Ea. 2,782.55 Rupees Two
contactor ,AC3 duty for time switch complete erected as Thousand
per direction Cat III (D) 4 pole 440V 40 Amp. Seven
20 1 Supplying, erecting, testing, commissioning approved Ea. 1,41,616.14 Rupees One
make M.S. Polygonal High Mast Pole having following Lakh(s)
general Specification. Forty One
(a) Polygonal Section fabricated from M.S. Plate Thousand
confirms BSEN 10025 & Hot deep galvanized Six Hundred
minimum 65/86 micron (as per IS 2629 /1985) Lantern Sixteen And
carriage with ring and rubber lines for erection of Paise
luminaries of suitable site. Fourteen
(b) Maximum telescopic section not more than four Only
(c) Double drum gear pipe motorized winch with 6mm
dia S.S. Rod (For 16 mtr and above size)
(d) Approved make L.E.D. aviation light = 1 No.
Lightening arrestor = 1 No. with necessary wiring of
sq.mm 5 core ISI copper cable Unarmoured.
(e) Bottom most section suitable for mounting reversible
motor and switchgears having door not more than
1400mm x 300mm with waterproof gasket & hinges &
locking arrangement.
(f) Pole structure comprises suitable size of reversible
motor, cable and necessary switchgears with control
(g) bottom section shall have suitable size of thickness
supports ribs foundation bolts nuts etc.
(h) Item not comprises the cost of lanterns.
(i) Necessary Cement Concrete foundation as per IS
including testing & commissioning of the entire
structure for following size of High Mast poles. [1] High
Mast 12 Mtr. TOP A/F 105 mm, BOTTOM A/F
360mm, No. of Sec. No. - 1, Bottom Thickness - 3 mm,
Size of Base Plate - Dia 520 mm x 20 mm thick,
Foundation Bolt Size M24 x 850 mm, Qty - 6 Nos.,
Suitable for mounting Fitting of Light - 6 Nos.
I /We am / are willing to carry out the work at @________ % below_______________ ( & above/ below %)(Should
be written in figures and words) Below / Above the tender rates mentioned above amount of tender works out as under.
Estimated amount put to tender
Add: % Above Rs. Deduct: % below Rs.
Net Rs. Net Rs.
In words Rs. In words Rs.
Qnty. Item Description Per Rs in Words Amount
(C) I /We here by declare that I /We have visited the site and fully requisited my self / ourselves with the local situation
regarding materials labour and other factors pertaining to work be fore submitting tender.
(D) I /we here by declare that / We have carefully studied the conditions of contracts detailed technical specification and other
tender documents of this work and agree to execute the same accordingly. .
Deputy Executive Engineer, Ex.Engineer
Electrical R & B sub-Division, Elec. (R&B) Division
(1)The rates are inclusive of all taxes, transport charges, storage Charges except GST and applicable GST Will be paid.
(2) The materials covered for wiring should be got approved from the Deputy Ex.Engr.In charge of the work.
(3) The materials and work shall have to be used and carried out as specified in technical note.
(4) All works Shall be Carried Out as per Public works Department hand book & Other Specification of the Division.or
(5) Rate are Inclusive of 1% Labour cess in Tender amount so 1% of total amount of bill will be deducated from the bill
(5) Rate are Inclusive of 1% Labour cess in Tender amount so 1% of total amount of bill will be deducated from the bill
(6) The Agency will have to Submit Certificate On Letter pad that cable used in the been used from ISI Certified cable drum as
peer Note of S.E.Electrical (R&B) Deptt.Gandhinagar's No.4211 Dtd.23.09.2008.
FOR DISMENTAL MATERIAL: 1) Dismantle Amount will Remain fix as per attached Document and will be Deduct
from rate Quoted by Contractor.
FOR TESTING OF MATERIAL
(1) Meterial to be used in work should be got approved by in Charge E.E.
(2) Sample of Material to be Used in the Work is required to be tested at S.V.N.I.T Laboratory/or From the approved Govt.
Research Institute,which is must Sample required to be submit as per requirement of S.V.N.T. Laboratory,in case of Cable &
Wire 3 Meters of Sample & for Fluorescent Fitting 5 Nos of Ballst With 2 Nos fluorescent Lamp may be required for testing
No Payment will be Made on Account of Sample Meterial,So it is requested to tenders/agency consider cost of Sample Material
Consideration While Quoting the Tender.Actule Paid by agency for testing of Material Will be Paid by the Department.Agency
is Requested to Contact S.V.N.T.Laoratory to Understand there requirement for testing of Material.
SIGNATURE OF CONTRACTOR
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
Schedule B.pdf
D M List.pdf
Make List.pdf
Special Contion for This Work.pdf
SPECIAL CONDITIONS.pdf
Notice No 03 of 2026-27.pdf
Tender Notice No 03 of 2026-27 Corrigendum -1.pdf
4.0 FINAL _ SBD (Electrical Work) _ 2024 _ 120 pg (1).pdf
Download all tender documents and submit your bid