Repair/Renovation of Tehsil office building for Establishment of CSC Excellence Centre.

12mm Cement plaster of mix in 1 : 6 ( 1 cement : 6 coarse sand) including all carriages.

Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete, 40 mm thick with 20mm nominal size stone aggregate, including all carriages.

Providing and fixing of 12 mm thick plywood/board(kit ply, Greenply, Century, Sarda, Mayur or equivalent) in ceiling/partition of walls or equivalent work incld frame work fixed over 2''x2'' frame work of imported wood with cost of Nails, cornice, etc all inclusive including cost and carriage of all material involved complete.

Providing and applying white cement based putty 2 mm thick of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete incld.all carriages

Finishing walls with acrylic smooth exterior paint of required shade on New work (Two or more coats applied @ 1.67 liter/10sqm over and including priming coat of exterior primer applied @ 2.20kg/10sqm), including all carriages.

Finishing with Deluxe multi surface paint system for interiors and exteriors using primer as per manufacturers’ specifications: Two or more coats applied @ 1.25 liter/10sqm over and including one coat of special primer applied @ 0.75liter /10sqm including all carriages.

Providing and fixing 35mm thick ISI marked flush door shutters conforming to IS: 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. With ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws

Providing and fixing of 4 mm thick float glass pans(weighing not less than 10 kg/sqm) embeded in putty and fixed with imported wooden beading up to size 40x20 mm in wooden frames and painting, including cost of nails etc and all carriages complete

Finishing with Deluxe multi surface paint system for interiors and exteriors using primer as per manufacturers’ specifications Painting wood work with deluxe multi surface paint of required shade. Two or more coats applied @ 0.90litre/10sqm over an under coat of primer applied @ 0.75litre/10sqm of approved brand and manufacture incld all carriages

Finishing with Deluxe multi surface paint system for interiors and exteriors using primer as per manufacturers ’specifications : Painting steel work with deluxe multi surface paint of required shade to give an even shade. Two or more coats applied @ 0.90litre/10sqm over an under coat of primer applied @ 0.80litre/10sqm of approved brand and manufacture incld all carriages