Providing functional household tap (FHTC) connection in village Aghar, Beh, Ghumali, Rey Khas etc. through proposed LWSS Rey Khas in Tehsil Fatehpur Distt. Kangra H.P. under Jal Jeevan Mission

Amount

Excavation in foundation trenches in earth work, pick work, jumper work within all leads and lifts stacking the excavated soil not more than 3 mtr clear from the edge of excavation and then returning the stacked soil in 15cm layers when required into plinth sides of foundation etc., consolidating each deposited layer by ramming watering and then disposing of all surplus excavated earth as directed within a leads of 20 mtr in pick jumper work 50% each in all leads and lifts as per the satisfaction of E-in-charge.

Providing, laying cement concrete 1:6:12(1cement:6sand)12graded stone agg., 40mm nominal size)& curing complete excluding the cost of form work in foundation and plinths complete in all respect within all leads and lifts as per the direction of Engineer-in-charge.

S.R masonry coursed with hard stone of approved quality in foundation and plinth racking out joint in CM 1:6 (1cement:6sand) complete in all respect within all leads and lifts as per the direction of Engineer-in-charge.

Providing, laying damp proof course 38mm thick with cement concrete 1:2:4(1cement:2sand:4graded stone agg., 12.5mm nominal size)& curing complete in all respect within all leads and lifts as per the direction of Engineer-in-charge.

Applying a coat of hot bitumen(mexphalt 80/100mm or equivalent using 1.70 kg/sqm.,. On demp proof course after cleaning the surface with a piece of cloth lightly socked in kerosene oil complete in all respect within all leads and lifts as per the direction of Engineer-in-charge.

2nd class brick work using common burnt clay building bricks of approved quality in super structure in cement mortar 1:6(1cement:6sand) complete in all respect within all leads and lifts as per the direction of Engineer-in-charge.

Providing wood work in frame in doors, windows clearstory windows & other frames wrough and framed in position of 2nd class deodar wood within all leads and lifts as per direction of Engineer-in-charge.

Providing and fixing, panelled and glazed or panelled & glazed shutter for doors, windows & clearstory windows including bright finished black enamelled from butt hings with necessary screw in local (Seasham, Tuni) wood 40mm thick within all leads and lifts as per direction of Engineer-in-charge.

Providing and fixing wire gauge shutters using galvanised MS wire gauge of IS gauge designation 85 G with wire of dia 0./56 mm for doors, windows & clearstory windows including bright finished balck enamelled iron hinges with neessary screws complete in all respect within all leads and lfits as per the direction of Engineer-in-charge.

Providing form work with steel plates 3.15mm thick welded with angle iron in frame 30x30x5mm, so as to give a fair finish including centring, shuttering, strutting and propping etc., with wooden battens and ballies, height of propping and centring below supporting floor to ceiling not exceeding 4 mtr and removal of the same for insitu-reinforced concrete & plain concrete work in:

Flat surfaces such as soffits of suspended floors, roofs, landing and the line floor etc upto 200mm thickness complete in all respect within all eads and lifts as per direction of Engineer-in-charge.

Beam cantilevers, girders & lintes sides & soffits of beams, haunching, cantilevers, bressumers 1.00 mtr in depth of all height from floor complete in all respect within all eads and lifts as per direction of Engineer-in-charge.

Edge of slab and break in floor 20 cm wide

Providing, laying cement concrete 1:2:4(1cement:2sand:4graded stone agg., 20mm nominal size) & curing complete excluding the cost of form work and reinforcement for reinforced concrete work in suspended floors roofs, landing, shelves and their supports balconies, beams girders and centilevers upto floor two level complete in all respect within all leads and lifts as per the direction of Engineer-in-charge.

In foundation and Plinth :-

Precast terrazo tiles 20m thick (with marble chipsof specified shadeand of specified laid in floor treads of steps and landingon bed on10mm thick cement plaster 1:6 (1cement6sand) jointed withneat cement slurry mixed with pigment to match the shade of ti

20mm thick cement plaster in single coat rough side of brick/stone masonry for interior plastering upto floor two level including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth in cement mortar 1:6 (1cement:6sand) complete in all respect within all leads and lifts as per the direction of Engineer-in-charge.

6mm thick cement plaster to ceiling in cement mortar 1:4 (1cement:4sand) complete in all respect within all leads and lifts as per the direction of Engineer-in-charge.

Providing plinth protection 50mm thick cement concrete 1:3:6(1cement:3asand:6graded stone agg., 20mm nominal size) including finishing the top surface concrete smooth complete in all respect within all leads and lifts as per the direction of Engineer-in-charge.

Providing tor steel reinforcement for reinforced concrete work including bending, binding, & placing in position complete upto floor two level) complete in all respect within all leads and lifts as per the direction of Engineer-in-charge.

Applying two coats of wood preservative on new wood based surface after and including preparing the surface by thoroughly cleaning dirt,dust and other foreign matater complete in all respect within all leads and lifts as per the direction of Engineer-in-charge.

Applying priming coat over new wood & wood based surface after and including repairing the surface by thoroughly cleaning oil grease dirt & other foreign matter & papering & knotting ready mixed paint brushing wood primer pink complete in all respect within all leads and lifts as per the direction of Engineer-in-charge.

Painting two coats(excluding priming coat) on new wood and wood surface with ready mixed paint brushing to give an even shade including cleaning of all dirt, dust & other foreign matter sand papering and stopping with paint other than white complete in all respect within all leads and lifts as per the direction of Engineer-in-charge.

Painting two coats (escluding priming coat) on new steel and other metal surfaces with ready mixed paint acid resisting brushing to give an even shade including cleaning of all dirt, dust and other foreign matter as per the satisfaction of E-in-charge.

White washing with lime on underocated surfaces (two coats) to give an even shade including thoroughly bromming the surface to remove all dirt, dust mortar dirt and other foreign matter complete in all respect within all leads and lifts as per the direction of Engineer-in-charge.

Hirmachi colour wash on undecorated wall surfaces(two coats) to give an even shade I/c thoroughly brooming the surface to remove all dust dirt & other foreign matter.

Finishing wall with water proofing cement paint of approved brand and manufacturer and of required shade on undecorated wall surfaces (two coats) to give an even shade after thoroughly brushing the surface to remove all dirt, dust and remains of loose powders material within all leads and lifts as per the direction of Engineer-in-charge.

Providing and fixing MS fan clamps type-I of 16mm dia MS barbent to shape with hooked ends in RCC slab during laying including painting the exposed position of loop, all as per standard design complete within all leads and lifts as per direction of Engineer-in-charge.

Providing and fixing 40x3mm flat iron hold fast 40cm long including fixing to frames with 10mm dia meter bolts, nuts & wooden plug and emedded in cement concrete block 30x10x15cm 1:3:6(1cement:3sand:6 graded stone agg., 20mm nominal size) complete in all respect within all leads and lifts as per the direction of Engineer-in-charge.

Providing and fixing alluminium sliding door bolts anodized colour & sshade with bolts and nuts screw etc., complete (250x16mm) complete in all respect within all leads and lifts as per the direction of Engineer-in-charge.

Providing and fixing alluminium tower bolts barrel anodized transparent all dyed to required shade & colour with screwcomplete in all respect within all leads and lifts as per the direction of Engineer-in-charge.

Providing and fixing alluminium handles anodized transparent or dyed to required colour or shade with necessary screw etc., complete complete in all respect within all leads and lifts as per the direction of Engineer-in-charge.

100 mm dia

Providing and fixing of MS round bars (16mm dia) in windows and ventilators.complete in all respect within all leads and lifts as per the direction of Engineer-in-charge.

Stone/Boulder filling under floors complete within all leads and lifts as per direction of Engineer-in-charge.

Providing, laying cement concrete 1:3:6(1cement:3sand:6graded stone agg., 40mm nominal size) & curing complete excluding the cost of form work a work in in foundation & plinth complete in all respect within all leads and lifts as per the direction of Engineer-in-charge.

Steel work welded in built up sections, trusses and framed work,including cutting,hoisting ,fixing in position and applying a priming coat of red lead paint etc.

P/F of fencing pannel of size 1.20x1.80m of Jali 25x25mm welded to MS black tube of 32mm dia of 14 gauge thick with MS flats 20x3mm including cutting welding painting with red oxide paint including hold fast of size 32x5mm flat complete in all respect the jali of 25x25mm should be fixed in 1.20x1.20 the work should be exeucted as per the direction of Engineer-in-charge.

15 mm thick cement plaster on fair sides of brick/stone masonery convrete walls for interior plastering upto floor two level including arises internal rounded angles not exceeding 80mm girth in cm 1:3 (1cement:3sand)

Construction of RCC over head tank 230000 ltr cap., with 15.00 mtr stagging height from ground level to bottom of dome slab comprising of inlet, scour & over flow pipes as per details given below from ground level to top dome of tank including GI bends of requried degree, valves of required size confirming to relevants code MS stair case i/c Mild steel flat railing around the container as well as around the complete stair case from bottom to top as per IS-specificaiton, steel ladder inner and outer side with required dia metre of MS flat of usual height as per site requirement, SFRC manhole cover of 500mm dia and weight of frame and cover should not be less than 45 kg., ventilator at top dome with minimum opeining of 45x450cms, water level indicator including floats and measuring gauge, lightening conductor with complete earthing arrangement etc. The RCC over head reservoir shall include randering/plastering of the uneven exposed surface, two coats of snowcem paint and any other component required for the completion of the job to the entire satisfaciton of Engineer-in-charge. The offers shall also include details structural drawing/ design based on bearing capacity of soil of proposed site and same shall be approved from the competent authority , design calculation expension joints as required at site. The offer shall also include the cost of providing and fixing of GMS/ MS pipes, duly flanged and sluice valve of required dia metre fitting complete including duck foot bends, puddle collers , expansion joints etc connecting with rising main & distribution main with required length from the edge of foundation and any other component required for the completion of job upto the entire satisfaction of Engineer-in-charge. Inlet pipe - 100 mm dia Outlet pipe - 100 mm dia Scour pipe - 100 mm dia

Sarabjit Singh Katoch