DEPOSIT-Revamping phase III-Supply installation, testing and commissioning of Additional LAN in High Court of Kerala -LAN revamping-General Electronics Work

OD280318/2024-2025:Supply, Installation, Testing and Commissioning of 24 port Data Center Switch with minimum 24 x 1GE/10GE SFP+ fiber ports and minimum 2 x 40GE/100GE QSFP+/QSFP28 uplink ports, dual hot-swappable redundant AC power supplies, switching capacity 880 Gbps or higher, forwarding rate 1309 Mpps or higher, MAC address table 64K or higher, support for IPv4/IPv6 static routing and dynamic routing protocols such as RIPv1/v2, RIPng, OSPFv2/v3 or equivalent, wherever OEM-supported and licensed, IEEE 802.3ad LACP, MC-LAG / equivalent multi-chassis link aggregation, Layer 3 hardware-based switching/routing, LLDP, LLDP-MED, storm control, loop protection / loop guard / equivalent, traffic mirroring / port monitoring / equivalent troubleshooting feature, and centralized management, configuration, monitoring and reporting through OEM-supported management platform and/or external NMS, compliant with relevant international safety and EMC certifications such as FCC, CE, RCM, VCCI, BSMI, UL, CB, RoHS or equivalent, complete with standard OEM warranty for 5 years Preferred Make: Juniper/HP/Fortinet

OD280320/2024-2025:Support Pack for one datacenter switch for 5 years directly from the OEM which includes 24×7×365 access to OEM Technical Assistance Center (TAC) via phone, email, and web portal, Firmware and software upgrades during the support period, Hardware replacement service with Advanced RMA, Access to OEM support portal, documentation, and technical advisories, Proactive security and product updates as released by OEM

OD280050/2024-2025:Supply, Installation, Testing and Commissioning of 48-Port Layer 3 Access Switch or higher with following minimum specifications: 48 × GE RJ45 Ports (PoE+); 4 × 10GE SFP+ Uplink Ports; PoE Budget -Minimum 700W; Switching Capacity Minimum 176 Gbps; Forwarding Rate Minimum 130 Mpps; MAC Address Table Minimum 32K; Layer 3 Features IPv4/IPv6 Static Routing; Routing Protocols RIPv1/v2, RIPng, OSPFv2/v3 or equivalent; Link Aggregation IEEE 802.3ad (LACP); LAG Group Size Minimum 8; Stacking / Virtualization Support for switch stacking / virtual chassis / equivalent technology; Key FeaturesLLDP, LLDP-MED, Storm Control, Loop Protection (Loop Guard or equivalent), IP Conflict Detection & Notification or equivalent, Port Mirroring / Traffic Monitoring / Virtual Wire (for troubleshooting), MC-LAG / Multi-chassis Link Aggregation or equivalent, Device Detection Endpoint profiling / device identification (MAC/IP-based), Management Support centralized and/or controller-based management, as well as standalone management via CLI/Web/SNMP and integration with external NMS, Standards & Compliance IEEE standards compliance and certifications such as FCC, CE, UL, CB, RoHS. with standard OEM warranty for 5 years. Preferred Make : Juniper,HP,Fortinet

OD280051/2024-2025:Supply and installation of 24 port Access Switch with minimum 24x GE RJ45 and 4x 10GE SFP+ ports. Switching throughput - 128 Gbps, Forwarding Capacity - 190 Mpps, 16K MAC Address, 1GB DDR4,256MB flash,redundant AC power supply,IPv4 and IPv6 static routing. RIPv1/v2, RIPng, OSPFv2/v3 Should support IEEE 802.3ad Link Aggregation with LACP,Link Aggregation Group Size 8, Should support virtual wire between two ports for troubleshooting,should support Static L3 hardware-based routing ,Switch should support IP conflict detection and notification,should support LLDP, should support Storm Control, LoopGuard,LLDP-MED, MCLAG(Multi-chassis link aggregation.Switch should support Device Detection to understand the type of device operating systems, display the IP address.,Should support centralized security management, configuration and reporting through a single console from existing switch controller or from external NMS RIPv1/v2, RIPng, OSPFv2/v3, Certification FCC, CE, RCM, VCCI, BSMI, UL, CB, RoHS2. .Standard OEM warranty :5 years Preferred Make : Juniper,HP,Fortinet

OD280053/2024-2025:Supply, Installation, Testing and Commissioning of 24-Port Layer 3 Access Switch or higher with following minimum specifications: 24 × GE RJ45 Ports (PoE+); 4 × 10GE SFP+ Uplink Ports; PoE Budget- Minimum 370W; Switching Capacity Minimum 128 Gbps; Forwarding Rate Minimum 95 Mpps; MAC Address Table Minimum 16K; Layer 3 Features IPv4/IPv6 Static Routing; Routing Protocols RIPv1/v2, RIPng, OSPFv2/v3 or equivalent; Link Aggregation IEEE 802.3ad (LACP); LAG Group Size Minimum 8; Stacking / Virtualization Support for switch stacking / virtual chassis / equivalent technology; Key FeaturesLLDP, LLDP-MED, Storm Control, Loop Protection (Loop Guard or equivalent), IP Conflict Detection & Notification or equivalent, Port Mirroring / Traffic Monitoring / Virtual Wire (for troubleshooting), MC-LAG / Multi-chassis Link Aggregation or equivalent, Device Detection Endpoint profiling / device identification (MAC/IP-based), Management Support centralized and/or controller-based management, as well as standalone management via CLI/Web/SNMP and integration with external NMS; Standards & Compliance IEEE standards compliance and certifications such as FCC, CE, UL, CB, RoHS.Standard OEM warranty: 5 years Preferred Make : Juniper /HP/Fortinet

OD280491/2024-2025: Supply, Installation, Testing and Commissioning of 24 Port fully loaded 1U Rack mountable LIU(Swing Type)with Splice tray ,pigtails and cable management. Approved Make: AFL, Belden, corning, Molex, R and M, Sterlite

OD280475/2024-2025:Supply and installation of 10 G base single mode Optical Transceiver SFP+ module with minimum reach of 10 KM, same make as switch OEM.

OD280495/2024-2025: Supply and installation of UL listed ETL 4 channel verified 1U rack mountable 24 port CAT-6 fully loaded patch panel with individually removable RJ45 &RJ11 compatible jacks.contact plating:1.27micrometers Au/Ni rear cable organizer,pannel should be made of cold rolled steel,powder coated ,front labelling facility required .operating life: Min.750 insetion cycles,Durability:Min. 200reterminations,dust covers to protects from dust&contaminants ,Material: Black powder coated CRS.Thickness :Min.1.52mm,front &rear port labelling as well as panel identification label-RoHS compliant including termination charges. Approved Make: Actassi, Belden, Molex, Panduit, R and M, Commscope

OD280496/2024-2025:Supply ,termination ,testing and commissioning of UL listed ETL 4 channel verified Information Outlet with CAT-6 keystone jack with dust protection,suitable for 22-24AWG bare copper conductor,contact plating: 5micron gold/Nickel as per TIA/EIA 568-B colour code confirming to the standards ANSI/TIA-568.2D,ISO/IEC 11801,IEEE 802.3,ISO/IEC 60332,UL94V-0 rated or equivalent,Min. 500 insertion cycles and 100 reterminations and RoHS compliant. Preferred make: Molex/ AMP/Legrand/Actassi/ Belden /R and M/ Sytimax