SITC 160 KVA DG Set at TB Hospital Kalyani Naddia

Amount

Supply, Installation, Testing & Commissioning of new, unused 3 phase, 415V, 50 HZ, 160 KVA Silent Diesel Generator Set comprising of Engine, Alternator, AMF panel, Base frame, Fuel tank, Battery, CPCB-II approved acoustic enclosure including all interconnection between Generator and AMF panel etc having following specification: A. DIESEL ENGINE Diesel Engine developing 197 BHP (CUMMINS / KIRLOSKAR/LAYLAND/ MAHINDRA/GREAVES make) Liquid cooled, four stock, Electric start, 6Cylinder, Turbo Charged & air cooled model. RPM- 1500 ,Type of Cooling- Liquid Cooled(EG Compleat 50:50). Air intake system -- Air intake manifold with air filter system. Coolant System -- Engine Water pump , radiator , coolant additive concentrate , By pass thermostat. Lubricating System- Provided with Oil pan, engine mounted lube oil pump and lube oil filter along with first fill of lube oil. Fuel System- Comprising of MICO fuel pump with electronic governor, 12V solenoid coil and replaceable fuel filter. Starting System- 1x24V DC electric starter and 1x24V Battery charging alternator. Coupling & Fly Wheels- Befitting coupling, Fly wheel & Fly wheel housing Safety Control- Comprising of protection against low lube oil pressure trip, high water temperature trip & Emergency stop switch. Exhaust System- Provided with turbo charger & residential exhaust silencer with flexible bellow and companion flanges inside the acoustic enclosure.

Lub oil consumption- Should be < 0.3% of S.F.C. Power Start Control: (i) Provided with Microprocessor based generator set monitoring & control system mounted in the Genset Control Panel. (ii) LED Lamp indication for GENSET RUNNING REMOTE START, SHUT DOWN, WARNING MANUAL, AUTO & STOP. (iii) Data Log includes Engine run time & Controller on time. (iv) Engine Data Display Arrangement - Starting Battery Voltage, Engine Running Hour, Engine Temperature & engine oil pressure. B. ALTERNATOR Synchronous Alternator 160KVA rating , (STAMFORD/KIRLOSKER/ABB/ALSTOM make) suitable for continuous operation At 1500 RPM , 415 Volts, 0.8 P.F ( lag) 50 Hz. , 3 Ph, 4 Wire system. The Alternator shall be Brushless type, self excited & self regulated through an AVR : • Voltage Regulation: ± 1% (max.) in static condition. • IP : 23 protection with class “H” insulation . • Permanent lubricating bearing . • Permissible over load of 10% for one hour in 12 hours of operation .

D. BASE FRAME : Common MS Channel fabricated base frame, primer coated & painted, containing the engine and the alternator mounted through AVM Pads E. FUEL TANK : 300LTRS, detachable tank built inside base frame complete with drain valve, air vent inlet & outlet connections, fuel gauge F. BATTERIES : 24 volt 90 AH or as per mfg. standard with connecting leads & terminals. C. ACOUSTIC ENCLOSURE : High quality, sound proof, weatherproof, environment friendly Acoustic Enclosure fabricated from 16 SWG Sheet Steel & powder coated, specially design to meet up CPCB-II standards to maintain the noise level below 75dB (A) at a distance of 1 Meter from acoustic enclosure under free field condition.

GEM ENGINEERS CO-OP SOCIETY LTD

T.D.K. ENTERPRISE