CONSTRUCTION OF ADDITIONAL

Amount

Providing form work with steel plates 3.15mm(Three point fifteen millimeter) thick welded with angle iron in frame 30x30x5mm(Thirty millimeter into thirty millimeter into five millimeter) so as to give a fair finish including centering, shuttering, strutting and propping etc. with wooden battens and ballies in any height of propping and centering below supporting floor to ceiling upto floor all level and removal of the same for in situ-reinforced concrete and pain concrete work including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Flat surfaces such as soffits of suspended floors, roofs, landings and the like floors etc. upto 200 mm (Two hundred millimeter) in thickness upto floor any level

Columns, pillars, posts and struts square rectangular or polygonal in plan upto floor any level.

Beams, cantilevers, girders and lintels, sides and soffits of beams, beam hunchings, cantilevers, bressumers and lintels in any depth in all height from floor any level.

Edges of slabs and breaks in floors and walls in any width upto floor any level.

Stair cases with slopping or stepped soffits excluding landings upto all floor and any level .

Providing and laying M-20 (twenty) grade cement concrete work mechanically mixed and vibrated with minimum cement concrete of 320 kg (three hundred twenty kilogram) per cubic metre with graded crushed stone aggregate 20mm (twenty millimetre) nominal size and curing complete excluding cost of form work and reinforcement for reinforced cement concrete work as per the direction of Engineer-in-Charge including carriage of materials with in all leads, lifts and other incidentals.

Suspended floors, roofs, landings , shelves and their support balconies, beams,girders,bressumers and contilever upto floor any level .

Columns, pillars, posts and struts square rectangular polygonal in plan upto floor any level.

Stair cases (except spiral stair cases)excluding landing but including preparing of the surface and finishing of nosing upto floor any level.

Providing and laying reinforced cement work 1:2:4 (one Cement: two Sand: four graded crushed stone aggregate 20 mm (twenty millimeter) nominal size ) with graded crushed stone aggregate to give a smooth and even surface including centring and shuttering etc. and curing complete excluding cost of reinforcement in string courses, copings, bed plates but anchor blocks plain windows sill and the like upto floor any level including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Providing Tor steel reinforcement for R.C.C. work including bending, binding and placing in position complete including cost of binding wire up to any floor level including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Cement concrete flooring 1:2:4 (one cement : two sand:four graded stone aggregate 20 mm(twenty millimeter) nominal size)laid in one layer finished with a floating coat of neat Cement 40 mm (forty millimeter) thick upto floor any level including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Applying cement slurry on RCC slab or cement concrete work using 2.75 Kg (Two point seventy five kilogram) of cement per square metre of floor area before laying cement concrete flooring including roughening, cleaning of the concrete surface complete including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Brick work using common burnt clay building bricks in supertructure above plinth leval up to floor two leval in Cement mortar 1:6 (One Cement : Six Sand) second Class Bricks upto floor any level including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Half brick masonry in common burnt clay building bricks in cement mortar 1:4 (one Cement :four Sand) (2nd Class Brick)in super structure above plinth level upto all floor any level including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Providing and laying 20 cm (twenty centimeter) thick composit stone masonry with stone facing of chisel dressed stones one line dressed in cement mortar 1:6 (one cement : six sand) and concrete backing with cement concrete 1:3:6 (one cement: three sand: six graded stone aggregate 20 mm (twenty millimeter) nominal size) on inner face of walls including centring,shuttering and propping complete up to floor two level as per the direction of Engineer-in-chargeincluding carriage of materials with in all leads, lifts and other incidentals . .

Providing and fixing standard steel section of M.S. angle and flat iron door, window, clerestory window manufactured from M.S. angle iron section of 40x40x5mm (forty into forty into five millimeter) and 50x5mm (fifty into five millimeter) MS flat in cimbination welded togthers to make one frame including hinges jambs, lock jambs beed and if required angle thrashold of mild steel angle 50x25mm (fifty into twenty five millimeter) welded or rigidly fixed by machanical means, lugs with split end tail to each jambs including steel butt hinges 2.5mm (two point five millimeter) thick with provision for locking arrangement and shock observer as specified and applying a coat of approved steel primer after pre treatment of the surface as directed by Engineer-in-Charge. including carriage of materials with in all leads, lifts and other incidentals .

Providing and fixing 35mm (thity five millimetre) thick including black enamelled M.S. butt hinges flush door shutters including black enamelled M.S. butt hinges interior grade, commercial type, core of black board construction with frame of first class hard wood and well matched comercial ply veneering with vertical grains of cross bands and face veneers on both faces of shutter including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Providing and fixing MS channel doors, windows frames manufactured from MS section ISMC 75x40mm (seventy five into four milimetre) and MS flat 75x4mm (seventy five into four milimetre) in combination welded together and standard windows shutter having style of Z Section with T section 25mm x25mm x3mm (Twenty five into twenty five into three millimeter) and angle iron 25x15x3mm ( twenty five into fifteen into three milimetre) as per drawing complete with fitting and necessary screws and applying a priming coat with read lead paint complete including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Providing and fixing M.S. grills of required patterns in wooden frames of windows etc. with M.S. Flats, square or round bars with round headed bolts and nuts or by screws Plain grill including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Providing 40x3mm (Forty into three millimeter) flat iron hold fast 40cm (Forty centimeter) long including fixing to frame with 10mm (Ten millimeter) diameter bolts and nuts and wooden plugs and embedding in cement concrete block 30x10x15cm(Thirty into ten into fifteen centimeter) in 1:3:6 (one cement : three sand : six graded crushed stone aggregate 20mm (Twenty millimeter) nominal size including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Providing and fixing M.S . sliding door bolts with nuts and screws etc. complete 300x16mm (three hundred into sixteen millimeter) as per the directions of Engineer-in-Charge including carriage of materials with in all leads, lifts and other incidentals.

Laying and Jointing PVC Pipe. Heading

250x10mm .(Two hundred fifty x ten millimetre)

200x10mm (Two hundred x ten millimeter)

Providing and fixing M.S. handles with the necessary screws etc. complete including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge in:- .

125mm .(One hundred twenty five millimeter)

100 mm. (One hundred millimeter)

Providing and fixing 100mm(one hundred millimetre) bright finished brass floor door stopper with rubber cushion screws etc. to suit shutter thickness complete including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Providing and fixing M.S. oxidized hooks and eyes complete 100 mm. (One hundred millimeter) including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Providing and fixing 150mm (one hundred fifty millimetre) oxidized M.S. double acting spring hinges bright finished with necessary screws etc. complete including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Providing and fixing glazed with glass panes of 5.50mm (five point five zero milimetre) thickness (weight not less than 13.75 kg/sqm (Thirteen point seventy five kilogram per squaremeter) including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Providing and fixing wire mesh shutter should be provided with a stainless steel 32 (thirty two) Gauge Fly mesh of 304 (three hundred four) grades with 144 (one hundred forty four) holes per square inch including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Providing and fixing 8 mm (eight millimeter) thick HDF heavy duty grade laminated wooden flooring AC-IV size 1286x124x8 mm (one thousand two hundred eighty six into one hundred twenty four into eight millimeter) approved brand and manufacture over CC.Base with polythene and thermo sheet cushion below as per specification complete in all respect including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Kota stone slab flooring 20 mm (twenty millimeter) (average) thick 55x55 cm (fifty five into fifty five centimeter) size base of cement mortor 1:4 (one cement :four sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab. including rubbing and polishing 25mm (twenty five millimeter) thick up to any floor level complete including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Providing and laying marble work (Table rubbed and polished ) in flooring 20 mm (twenty millimeter) thick base in cement mortar 1:3 (one cement: three sand ) including jointing with cement mortar 1:2 (one cement : two marble dust) with an admixture of pigment to match the shade of the marble 20 mm (twenty millimeter) thick white makrana marble including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

White glazed tiles 6mm (Six millimeter) thick in skirting risers of steps and dado 12mm (Twelve millimeter) thick cement mortar 1:3 (one cement : three sand) and jointed with cement slurry including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Providing and fixing on wall face (D-Plast) rain water pipes of working presser not less then 4.5 kg(four point five)/square metre including filling the joint with approved adhesive complete 100mm (one hundred millimeter) dia pipe complete including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Providing and fixing on wall face PVC (D-Plast) for rain water pipes including filling the joint, with approved adhesive PVC Plain Bend 150 mm(One hundred fifty milimetre) complete including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Providing and fixing on wall face PVC (D-Plast) accessories for rain water pipes including filling the joint with approved adhesive PVC Shoe 150mm dia(One hundred fifty milimetre) dia complete including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Providing and fixing M.S. holder bat clamp of approved design to SCI Pipes embeded in and including cement concrete block 10x10x10 Cm (Ten into ten into ten centimeter) of 1:2:4 (One Cement : two sand : four graded stone aggregate 20mm (twenty millimeter) nominal size and cost of cutting holes and making good the wall etc. 100mm (one hundred millimeter) diametre for CI pipe including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Applying priming coat over new steel and other metal surfaces after and including preparing the surface by thoroughly cleaning oil grease dirt and other foreign matter and scoured with wire brushes fine steel wool scrubers and sand paper complete with ready mixed priming pant brushing red leadred oxide/zinc oxide chrome including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Painting two coats (excluding priming coat) on new steel and other metal surfces with enamel paint brushing to give an even shade including cleaning the surface of all dirt, dust and other foregin matters Enamel paint other than white including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Applying priming coat over new wood and wood based surfaces after and including preparing the surface by thoroughly cleaning oil, grease,dirt and other forein matter sand papering and knotting ready mixed paint brushing wood priming pink of approved brand and manufacture (Nerolac/Asian Shalimar) conforming to IS: 3536-1966 brushing including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Painting two coats (excluding priming coat) on new wood and wood based surfaces with ready mixed paint brushing to give an even shade including cleaning of oil, grease,dirt and and other foreign matter sand papering and stoping ready mixed paint white including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

6mm (Six millimeter) cement plaster to ceiling upto all floor in cement mortar 1:3 (one Cement : three Sand) including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

15mm (fifteen milimetre) cement plaster in single coat on the fair side of brick/concrete/stone wall for enterior plastering upto floor all level including arises, internal rounded angles, chamfers and/or rounded angles not exceeding 80mm (Eighty milimetre) in girth and finished even and smooth in cement mortar 1:6 (one cement:six sand) including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

15mm (fifteen milimetre) cement plaster in single coat on the rough side of brick/concrete/stone walls for enterior plastering up to all floor level including arises, internal rounded angles,chamfers and/or rounded angles not exceeding 80mm(eighty milimetre) in girth and finished even and smooth in cement mortar 1:6 (one cement:six sand) including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Applying Birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Applying one coat of Acrylic washable emulsion Spectrum quartz king or equivalent finish for interior painting with brushes plain smooth finish composed of acrylic polymere in emulsion inorganic/special pigment siliceous aggregate anti fungicides anti-rusting & foaming in two coat including necessary putty to give smooth even surface, sand papered smooth complete including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Brush finish of altek harmony of NCL altek and secular exterior paint containing pure acrylic hinders of international standard good quality additives, colorwith chemicals to resist algae and fungus to be applied in two coats, directly on clean wall over a coat of altek cement primer or equivalent of approved shade upto all floor level or as per direction of Engineer-in-Charge.

Providing and fixing M.S fan clamps of standared shape and size including cutting and making the good including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Providing and laying granite stone in flooring 20 mm (twenty millimeter) (avarage) thickness base of cement mortar 1:3(one cement: three sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade granite stone i/c rubbing and polishing complete 20 mm (twenty millimeter) thick including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

P/F 19 mm (Nineteen millimeter) thick water proof termite resistant commerical/MDF board i/c shalvers and shutter, back side cupboard /cabinet shall be 8 mm (eight millimetter) thick ply and all cut portion of shalves shall be finished with 6 mm (Six millimeter) thick hard wood edging . The cut portion of shutter from all side shall be finished with 12 mm (Twelve millimeter) thick hard wood edging. The shutter shall be finished with 1 mm (One millimeter) thick lamination of approved shade i/c piano hinges and magnetic catcher with all accessories etc. complete including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

P/F 19 mm (Nineteen millimeter) thick water proof termite resistant MDF board i/c shalvers and shutter with 4mm (Four millimeter) thick glass, back side cupboard /cabinet shall be 8 mm (Eight millimeter) thick ply and all cut portion of shalves shall be finished with 6 mm (Six millimeter) thick hard wood edging . The cut portion of shutter from all side shall be finished with 12 mm (Twelve millimeter) thick hard wood edging. The shutter shall be finished with 1 mm (One millimeter) thick lamination of approved shade i/c piano hinges and magnetic catcher with all accessories etc. complete including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Providing and fixing 85 centimetre height railing with M.S rectangle hollow pipe 75x50 mm (Seventy five into fifty millimeter) of 14 (forteen) gauge M.S Black sheet hand rail and M.S square bars 19mmx19mm(Nineteen into nineteen millimeter) thick size baluster at 30CM (Thirteen centimetre) C/C duly welded with 2 (Two) nos. M.S flate 40mmx6mm (forty into six millimeter) size and 19 mm (nineteen millimeter) square bars lugs 10Cm (Ten centimetre) long at lower end of balusters embeded in R.C.C steps or waist slab i/c primimg coat of steel primer and painting with steel enamel paint other than white as per design including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Steel work welded in built up sections, trusses and framed work,including cutting, hoisting fixing in position and applying a priming coat of red lead paint including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

In beams joists channels ,angles ,tee ,flats with connecting plates or angle cleats as in main and cross beams,hip and jack rafters,purlins connected to common rafters and the like.

In gratings framed guard bars,ladders,railling,brackets and similar works

Providing and fixing 0.60mm (Zero point six zero milimetre) thick prepainted steel sheet in roofing with hot dipped metallic zinc coasted sheet with top coat of regular modified polyester (RNP) organic coating of 20 (Twenty) microns over 5 ( five) micons primer coating to back coat of polyester of 5 microns over 5 microns primer coating including fixing with screws, prepainted iron J or L hooks, bolts and nuts 6mm(six milimetre) dia with prepainted limpet and rubber washer complete with all accessories as required as per specifications and including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Providing and fixing ridges or hips 60 cm(sixty centimeter) overall with 0.60mm ( Zero point six zero milimetre)thick pre painted sheet in roofing with hot dipped metallic Zink coated sheet with top coat of regular modified polyester organic coating of 20 microns over 5 microns primer coating + back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with screws pre painted J or L hooks, bolts and nuts 6mm(Six milimetre) dia meter & pre painted G.I. limpet & bitumen washers completeincluding carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Providing and fixing valley 60cm (Sixty centimetre) overall 0.60mm (Zero point six zero milimetre)thick prepainted steel sheet in roofing with hot dipped metalic zinc coated sheetwith top coat of regular modified polyster organic coating of back coat of polyster of 5 microns over 5 microns primer coating including fixing with screws, preprinted iron J and L hooks,bolts & nuts 6mm (Six milimetre)dia and prepainted G.I. limpet and bitumen washers complete with all accessories as required including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Providing and fixing M.S. BP Sheet1.66 mm(One point sixty six milimetre) to 2mm (Two milimetre) thick in eves board/ facia/soffit/ceiling including cutting ,fixing and welding to steel roof members and applying a coat of red lead primer complete as per direction of the Engineer-in-Charge base member of steel work shall be measurement and paid for sepreately including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Providing and fixing M.S round holding down or anchor bolts with nuts and washer in plate complete including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Providing and fixing angle iron cupboard frames manufactured from M.S.Angle iron section 25X 25X5 mm (twenty five into twenty five into five millimeter) thickness including hinges jamb,lock jamb, beed and if equired angle thrashold of mild steel angle 25X25 mm (Twenty five into twenty five millimeter) welded or rigidly fixed by mechanical means,lugs with split end tails to each jamb including steel butt hinges 2.5 mm (Two point five millimeter) thick with provision for locking rrangement and shock absorber as specified and plying a coat of approved steel primer after preteatment of the surface including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Providing and laying cement concrete 1 : 6 : 12 (one cement : six sand : twelve graded crushed stone aggregate 40 mm (Forty millimetre nominal size) mechanically mixed and vibrated and curing complete excluding cost of form work in foundation and plinth including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Stone filling behind retaining walls including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Providing and laying heavy duty precast cement conrete inter locking paver blocks vibro compacted upto M-50 grade i/c border or kurb block grey or coloured over sub-base of concrete with 25mm (Twenty five millimeter) thick average thickness of cement mortar 1:4 (one cement : four sand) laid over and jointed with neat cement slurry mixed with pigment to match the shade of blocks i/c curing rubbing & polishing complete (Sub base concrete floor to be paid for 60 mm (sixty millimeter) thick interlocking blocks including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Constructing course rubble dressed "U" shape open surface drain with side wall 15X22cm (Fifteen into twenty two centimeter) in cement mortor 1:6 (one cement: six sand) and in side plastering with cement plaster 1:3 (one cement : three sand ) including earth work and laying 10cm (Ten Centimetre) cement concrete 1:5:10 (one cement :five sand:ten graded stone aggregate 40mm (Forty millimetre) nominal size) and 7.5cm (seven point five centimeter) cement concrete 1:2:4(one cement :two sand :four graded stone aggregate 20mm (Twenty millimetre) nominal size) and finishing with a floating coat of neat cement and curing complete as per standard design

Providing under layer for plinth protection of 75mm (Seventy Five millimetre) thick (unconsolidated) bed of dry brick/stone aggregated 40mm (Forty millimetre) nominal size well rammed and consolidated and grouted with fine sand including preparation of ground including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Providing and fixing plytheline - Aluminium polyethylene (PE-AL-PE) composite pressure pipe U.V. stabilized with carbon black confirming to IS-15450-2004 water supply including clamps at one metre spacing, cutting, fixing and making good the wall etc. but excluding the cost of fittings (internal work) pipe exposed on wall internal work exposed on wall 1216 (16mm (sixteen millimeter) O.D. pipe) including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Providing and fixing plytheline - Aluminium polyethylene (PE-AL-PE) composite pressure pipe U.V. stabilized with carbon black confirming to IS-15450-2004 water supply including clamps at one metre spacing, cutting, fixing and making good the wall etc. but excluding the cost of fittings (internal work) pipe exposed on wall internal work exposed on wall 1620 (20 mm (Twenty millimeter) O.D. pipe) including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Providing and fixing composite end seal compression fitting as per IS-15450-2004 for cold water supply e.g. tees, elbows, reducers, connectors, couplers and clamps with jointing, testing and fitting complete including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Equal Tee 2016 (Two thousand sixteen)

Equal Tee 1620 (One thosuand six hundred twenty)

Reducer 1620 x 1216 (one thousand six hundred twenty into one thousand two hundred sixteen)

Reducer 2025x1216 (two thousand twenty five into one thousand two hundred sixteen)

Female branch Tee 1216x1216x150 mm (one thousand two hundred sixteen into one thousand two hundred sixteen into one hundred fifty millimeter) thread

Female branch Tee 1620x1620x20mm (one thousand six hundred twenty into one thousand six hundred twenty into twenty millimeter) thread

Female elbows 1620x15 (one thousand six hundred twenty into fifteen) thread.

Female elbows 1216 x15 (one thousand two hundred sixteen into fifteen) thread.

Fimale thread connectors 1216x15mm (one thousand two hundred sixteen into fifteen millimeter) thread.

Fimale thread connectors 1620x15 mm (one thousand six hundred twenty into fifteen millimeter) thread.

Male thread connectors 1216x15 mm (one thousand two hundred sixteen into fifteen millimeter) thread.

Male thread connectors 1620x15 mm (one thousand six hundred twenty into fifteen millimeter) thread.

Coupler 1620 (One thosuand six hundred twenty)

coupler 1216 (One thosuand two hundred sixteen)

Reducer 1620x1216 (one thousand six hundred twenty into one thosuand two hundred sixteen )

Reducer tee 2025x1216 (two thousand twenty five into one thosuand two hundred sixteen )

Providing and fixing composite end seal compression fitting as per IS-15450-2004 for cold water supply e.g. tees, elbows, reducers, connectors, couplers and clamps with jointing, testing and fitting complete including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

15mm (fifteen millimetre) nominal bore

20mm (Twenty millimetre) nominal bore

Providing and fixing PVC water storage tank of ISI : 12701 marked,G.I. inlet and outlet connection and 15mm (fifteen millimeter) dia brass ball valve and mosquito proof PVC cover with locking arrangement including hoisting up to all heights above ground level 1000 L (One thousand litres) net capacity tank including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Fixing water metre stop-cock in galvanised mild steel tube including necessary fittings such as mild steel galvanised jam nut, sockets, etc. cutting and making long screws complete (water metre and stop-cock to be measured and paid for separately). 20mm (Twenty millimeter) nominal bore including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Providing and fixing cast iron holder bats including steel bolts to sand cast iron /cast (Spun) iron pipe embedded in and including cement concrete blocks 100mm x100mm x 100mm (One hundred into one hundred into one hundred millimeter) of 1 : 2 : 4 ( one cement : two sand : four graded stone aggregate 20mm (twenty millimeter) nominal size including cost of cutting holes and making good the walls for 100mm (One hundred millimeter) nominal diametre/ size) pipe. as per direction of Engineer-in-charge including all leads, lifts and carriage of material and other incidental.

Providing and fixing high pressure PVC spigot and socket, waste and ventilating pipes ISI marked including fixing with approved adhesive etc. complete. 150mm (One hundred fifty millimeter) dia including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge ..

Providing and fixing high pressure PVC spigot and socket, waste and ventilating pipes ISI marked including fixing with approved adhesive etc. complete. 110mm (One hundred ten millimeter) dia including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Providing and fixing PVC door bend with oval access door insertion rubber washer 3mm (three millimetre) thick bolts and nuts ISI marked complete including fixing with approved adhesive etc. complete including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge in:-

150 mm dia(one hundred fifty) dia

110 mm dia (one hundred ten) dia

Providing and fixing PVC plain bends ISI marked including fixing with approved adhesive etc. complete including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

150 mm dia(one hundred fifty) dia

110 mm dia (one hundred ten) dia

Providing and fixing PVC single equal branch plain ISI marked including fixing with approved adhesive etc. complete including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

150 mm dia(one hundred fifty) dia

110 mm dia (one hundred ten) dia

Providing and fixing PVC cowl ISI marked including fixing with approved adhesive etc. complete including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

150 mm dia(one hundred fifty) dia

110 mm dia (one hundred ten) dia

Providing and fixing PVC collars ISI marked including fixing with approved adhesive etc. complete including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

150 mm dia(one hundred fifty) dia

110 mm dia (one hundred ten) dia

Providing and fixing PVC connection pipe with brass unions 300/450mm (three hundred/four hundred fifty millimeter) length 15mm (Fifteen millimeter) nominal size including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Providing and fixing 600x450mm (Six hundred into four hundred fifty millimeter) beveled edge mirror of superior glass mounted on 6mm (Six millimeter) thick A.C. sheet or plywood sheet and fixed to wooden plugs with C.P. brass screws and washers including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Providing and fixing C.P. brass towell rail complete with C.P. brass brackets fixed to wooden plugs with C.P. brass screws (i) 750mmx 20mm (Seven hundred fifty into twenty millimeter) including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Providing and fixing 600mmx 120mm (six hundred into one hundred twenty millimeter) glass shelf with C.P. brass bracket and quard rail complete fixed to wooden plugs with C.P. brass screws including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Providing and fixing toilet paper holder C.P. brass including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Providing and fixing chromium plated brass soap dish Recessed Type ( S-Steel) No. 1531 of Hoterlier Series of JAQUAR with C.P. brass brackets fixed to wooden cleats with C.P. brass screws including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Providing and fixing C.P.brass pillar tap with Capstan head 15mm (Fifteen millimetre) dia including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Providing and fixing C.P. Brass stop cock capstan head 15 mm dia including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Providing and fixing C.P. Brass bib tap with Capstan head 15 mm (Fifteen millimeter)dia including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Providing and fixing brass full way valve with wheel including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

15mm (Fifteen Millimetre)nominal bore

20mm (Twenty Millimetre) nominal bore

Providing and fixing PVC floor trap ISI marked of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floors etc. cpmplete including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

110mm X 90mm. (One hundred ten x ninety millimeter)

110mm X 75mm. (One hundred ten x seventy five millimeter)

Providing and fixing C.P. brass chain 50cm (Fifty centimeter) long and rubber plugs for sink or wash basin 32mm (Thirty two millimeter) dia size including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Providing and fixing M.I. union for wash basin or sink 32mm (thirty two millimetre) dia size including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Providing and fixing vitreous china wash down water closet (European) Type -W.C. Pan) W.C cat No 92070 of Hind ware with integral 'p' or 's' trap including jointing the trap with soil pipe in cement mortar 1:1 (one cement : one sand) (seal and cover to be measured and paid for separately) including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge ..

Anglo Indian universal closet.

Ordinary closet.

Providing and fixing vitreous China 100mm(One hundred millimeter) size 'P' or 'S' trap for water closet (Squatting pan) including jointing the trap with the pan and soil pipe in cement mortar 1:1 (one cement : one sand) vitreous China including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Providing and fixing plastic seat (Solid type) and cover for wash down water closet with C.P. brass hinges and rubber buffers a white plastic sheet and cover including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Providing and fixing PTMT Coloured /white high density polyethylene/poly propylene 10 L (Ten liters) capacity (full flush) European standard control low level flushing cistern Tango Cat No 10086 of Hindware with fitting with a pair of brackets with fittings such as lead valve, siphon, 15mm (Fifteen millimeter) nominal size PVC ball volve with polythene float, with push button, couplings for connections with inlet, outlet and over flow pipe, 40mm dia C.P. flush bend including cutting holes in walls and making good the same and connecting the flush bend with cistern and closet (overflow pipe to be measured and paid for separately) including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Providing and fixing vitreous china wash basin with single hole for pillar tap with cast iron or mild steel brackets painted white including cutting holes and making good the same but excluding fitting flat back 630X450mm (Six hunded thirty into four hundred fifty millimeter)Tango Cat No 10086 of Hindware including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Providing and fixing vitreous China pedestal for wash basin complete recessed at the back for reception of pipe and fittings. including carriage of materials' including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Providing and fixing 32mm (Thirty two millimeter) dia lead waste pipe for wash basin or sink, including brass check nut complete including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Providing and fixing vitreous china bowl pattern urinal including connection the urinal with waste pipe by means of white lead mixed with chopped hamp (Waste pipe to be measured and paid for separately) Flat back type of size 430mmx260mmx350mm (Four hundred thirty into two hundred sixty into three hundred fifty millimeter) including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Providing and fixing PTMT coloured white automatic flushing cistern with a pair ofPVC/ C.I. or M.S. brackets complete with fitting including C.I./White symphonic apparatus mosquito proof i.e. C.P./PVC brass unions and coupling for connection with inlet outlet and over flow pipes including cutting holes and making good the same (Over flow pipes to be measured and paid for separately) 10 L (Ten liters) capacity including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Providing and fixing 100mm(One hundred millimeter) sand cast iron grating for gully floor or Nahni trap including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Constructing manhole with R.C.C. top slab in 1 : 2: 4 ( one cement : two sand : four graded crushed stone aggregate 20mm (twenty millimetre) nominal size foundation concrete 1 : 4 : 8 ( one cement : four sand : eight graded stone aggregate 40mm nominal size inside plastering 15mm thick with cement mortar 1 :3 ( one cement : three sand) finished with a floating coat of neat cement and making channels in cement concrete 1 :2 :4 mix (one cement : two sand : four graded crushed stone aggregate 20mm (Twenty millimeter) nominal size) finished smooth complete including curing and testing inside size 800mmx800mm( eight hundred into eight hundred millimeter) and 500mm(Five hundred millimeter) deep including C.I. cover with frame (light duty single seal pattern-1) 455mmx610mm (Four hundred fifty five into six hundred ten millimeter) internal diamensions total weight of cover and frame to be not less than 38Kg (Thirty eight kilogram) weight of cover 23Kg (Twenty three kilogram) and weight of frame 15Kg (Fifteen kilogram) with 300mm (Three hundred millimeter) thick walls of squared rubble masonry coursed with hard stones of approved quality in cement mortar 1:3 (one cement : three sand) including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Constructing brick masonry chamber for underground C.I. Inspection chamber and bends with common burnt clay building bricks in cement mortar 1:5 (one cement : five sand ) C.I. Cover with frame (light duty ) 355mm x 610mm (Three hundred fifty five into six hundred ten millimeter) internal dimensions total weight of cover with frame to be not less than 38kg (Thirty eight kilogram) (weight of cover 23 kg (Twenty three kilogram) and weight of frame 15kg (Fifteen kilogram) R..C.C top slab with 1:2:4 mix (one cement : two sand : four graded stone aggregate 20mm (Twenty millimeter) nominal size ) foundation concrete 1:5:10 ( one cement : five sand : ten graded stone aggregate 40mm (Forty millimeter) nominal size) inside plaster 15mm (Fifteen millimeter) thick with cement mortar 1:3 (one cement : three sand) finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete.Inside dimensions 455 mm x 610 mm x 450 mm (Four hundred fifty five into six hundred ten into four hundred fifty millimeter) deep single pipe line including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Providing and fixing Divisional plate for urinal 600x300mm (Six hundred into three hundred millimeter) vitreous china including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

ATUL SHARMA