PERIODICAL SERVICES, LEAKAGE /SEEPAGE AND MISC B/R ITEMS IN DOMESTIC AREA IN ZONE A AT AF STN AMBALA

Amount

M&L for brooming down surfaces of any description and applying one coat of white wash on old decorated surfaces of walls including preparation of old surfaces & filling cracks and holes etc complete all as specified and directed.

All as per BOQ srl item No 1.00 here-in-above but two coats of white wash complete all as specified and directed.

All as per BOQ srl Item 1.00 here-in-above but on ceiling complete all as specified and directed.

M&L for preparation of old decorated surface of wall and applying one coat of Oil bound distemper complete all as specified and directed.

All as per BOQ srl Item 4.00 here-in-above but two coats of Oil bound distemper complete all as specified and directed.

M & L for complete removal of Existing Treatment and applying two coats of oil bound distemper over a coat of cement Primer and wall care putty complete all as specified and directed.

M&L for preparation of old decorated surfaces and applying one coat of cement base paint on wall etc complete all as specified and directed.

M & L for complete removal of Existing Treatment and applying two coats of Cement Based Paint over a coat of cement primer, complete all as specified and directed Make : Asian/ICL/Berger/Nerolac.

M&L for preperation of old wooden surfaces of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint etc complete all as specified and directed.

M&L for preparation of old steel surfaces of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint etc complete all as specified and directed.

M&L for complete removal of old/existing treatment incl preparation of wall sufaces of any description and applying two coats of exterior grade weather proof paint water based over a coat of primer and 1 mm birla care putty, on wall surfaces complete all as specified and directed. Note : Height of the bldgs is Appx 12 mtr, cost of necessary scaffolding and safety measures for labours shall be deemed to be included is quoted rate. First the complete removal of existing treatment shall be done and got approved from Engr-in-charge. Final coat shall be done after getting approval of completion of priming coat from Engr-in-Charge

M&L for Obliterating old writing of any description, not exceeding 0.1 sqm, with paint to match existing work, complete all as specified and drected

M&L for Writing letters or figures (Block, Roman, Italic or Indian) n exc 30 cm high, complete all as specified and drected

Taking down cement or cement lime plaster, any description on brick or stone walls, etc including racking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed .

M&L for rendering 5 mm thick in CM 1:3 on concrete surface of ceiling, finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15 mm thick in CM 1:6 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed .

M&L for Rendering 15 mm thick on brick or concrete surfaces in CM 1:4, finished even & smooth without using extra cement complete all as specified and directed.

M & L for rough cast plaster incl 15 mm thick CM 1:3 on brick work or concrete surface complete all as specified in SSR Part -1 clause 14.22 complete all as specified and directed. Note: Rough cast plaster finish shall be as follow :- After applying the under coat cement mortar 1:3 and while it is still in plastic state the rough cast mixture consisting of crushed stone or fine gravel aggreagte ( Which is generally of size between 6 to 12 mm depanding on the texture required mixed with coarse sand and cement in the ratio of 1:1:1 shall be applied and finished even . The mix of cement and sand shall be made slightly wetter than normal for rendering to ensure the larger aggregate are throughly covered. Note : i) Water proofing compound will be measured and paid separately under respective item. ii) Area to be plastered may be carried out up to height of 15 m, necessary scaffolding safety measures for labours required shall deemed to be included in rate quoted against this item.

M&L for preparation of new plastered surfaces and applying three coats of white wash on ceilings complete all as specified and directed

M&L for preparation of new plastered surfaces and applying two coats of cement base paint on walls complete all as specified and directed

M & L for preparation of new surfaces of wall & applying two coats of oil bound distemper over a coat of birla wall care putty complete all as specified and directed

S&F Bib taps, cast copper alloy with crutch or butterfly handle, screwed down screwed for iron pipe or for brass ferrule complete all as specified and directed

S&F in repair vireous china wash basin, white, flat back, size 450x300mm excluding taps, waste,chain and plug and porcelain stopper but including brackets and fixing of flush pipe, waste fitting, PVC connection and pillar tap complete all as specified and directed.

Supply and fix in repair PVC valve less syphonic action type flushing cistern 10ltr capacity low level, white/coloured with inlet ball valve float and handle including bracket (incl.taking down old cistern ) and fixing of PVC flush pipe 32 mm dia and PVC connection pipes complete all as specified and directed.

Supply only flush pipe of polythene of low or high density 32 mm PVC for low level flushing cistern complete all as specified and drected

Supply only PVC connection 15 mm dia, 450 mm long including brass ferrules on both ends complete all as specified and directed

Supply only low density PVC pipe 32/40 mm dia as in waste pipe to sink complete all as specified and directed

S&F Vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) complete all as specified and directed.

S & F in repairs galvanised mild steel wire cloth, 0.56 mm nominal dia of wire Stainless steel wire cloth, and average width of aperture 1.18mm and fixed with stainless steel wire staples complete all as specified and directed

Dismantling water tank of capacity exc 250 ltr not exceeding 500 ltr and removing to store of any description complete all as specified and directed

Dismantling water tank of capacity exc 500 ltr & not exc 1000 ltrs and removing to store of any description complete all as specified and directed

S&F rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position as specified of 500 litres capacity complete all as specified and directed.

S&F rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position as specified of 1000 litres capacity complete all as specified and directed.

S & F in rep Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed in 20mm bore dia complete all as specified and directed.

S&F sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed

S&F as in repair stainless steel kitchen plate rack of size 24x36x10 inch of minimum thickness 0.8mm including necessary drilling, fixing with screw, plugs in kitchen etc complete all as specified and directed Make : Nirali/Prayag/Anjali

S&F in repair 15 mm Brass CP mixer for mixing hot & cold water screwed down for iron pipe complete all as specified and directed.

S&F in repair health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 mtr tube & hook (braded Tube) and ABS valve including making connection and fixed in position complete all as specified and directed.

S&F in repair Centre hole wash basin mixer for wash hand basin complete all as specified and directed Make: Jaguar Product No. CONCHR167KNB in Parryeare /Cera /Jaquar

S&F in repair corner glass shelf 200mm complete all specified and directed Make : Prayag Cat No. BEA-42 or equivalent in cera/Jaguar/ parryware

S&F in repair glass shelf 500x 125mm Cera/Jaquar/Parryware complete all as specified and directed Make: Prayag Cat No. BEA-45 or equivalent in cera/Jaguar/ parryware

Taking down door / window frame with shutter (without taking of shutter from the frame) area not exceeding 1.5 sqm complete all as specified and directed.

Taking down door / window frame with shutter (without taking of shutter from the frame) area exceeding 1.50 sqm but not exceeding 4 sqm complete all as specified and directed.

Taking down shutters only of any description area exceeding 1.00 sqm but not exceeding 2.00 sqm complete all as specified and directed.

M&L for mild steel angle iron as in framed chowkats for door shutters cut to length including necessary welding and making holes for fixing butt hinges and fixing 10 mm dia as tle bar complete confirming to Fe-410 -O etc complete all as specified and directed.

M&L for mild steel 25 x 5 mm flat iron for hold fast confirming to Fe-410 -O etc complete all as specified and directed.

S&F flush shutters solid core construction with block board core and plywood face panels commercial type on both sides 30 mm thickness complete all as specified and directed.

S&F steel ventilator with top hung shutter including hinges peg stay to receive glazing or gauzing and one coat of primer including fixing of hold fast size 25 x 5 mm of flat iron etc complete all as specified and directed.

S&F steel window (box type) factory fabricated, double shutter (glazed and wire gauzed) with side hung shutters including pintle type hinges, steel handles fabricated type for each leaf duly welded, mild steel barrel tower bolts 150mm size (02Nos for each leaf) duly welded, with glazing bars dovetailed or welded including MS fillets, welding with and including 8mm square bars with one shop coat of red oxide zinc chrome primer overall complete all as specified and as directed Notes: (i) Windows shall be fabricated as per CE Palam drawing No. TD-219 Sh 1/3 to 3/3 dated 02 Jan 2007 (updated up to date) and these drawings shall be referred at the O/o the GE (AF) Ambala (ii) Glazing and wire gauge will be measured and paid separately under respective items herein (iii) Any other sundries, etc. as required at site shall be deemed to be included in the quoted rate (iv) Cost of guard bars shall be deemed to be included in the quoted rate.

S&F 35 mm thick plain framed panelled factory made shutter made out of IInd class hard wood rail and styles and panel of 12 mm thick veneered particle board or 9 mm thick plywood with commercial veneering on both faces the size of rail and style as per IS 1083 (part-I) kiln seasoned and chemically pressure freated of any number of panel complete all specified and directed

S&F 35 mm thick 2nd class HW glazed and skelton door shutters open rebated with sash bar and prepared to receive wire gauge edges cut and mitred beads for securing glass etc size of members of shutters as specified in SSR Part I section and clause 8.20 (a) fitted to chowkats or frames of any numbers of panels as directed by EIC.

S & F framed guard bars with mild steel Square bars with ends of bars shouldered and/ or riveted and similar work confirming to FE 290 Gde-E-165 complete all as specified and directed

S & F 100 mm long Mild steel medium weight cold rolled butt hinges and fixed with screw/welded to frames etc all as specified and as directed

All as per BOQ srl Item No.53.00 here-in-above above but 50mm long, complete all specified and directed

S&F butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21, 100 mm long complete all as specified and directed

S&F 125 mm Extruded Aluminium handles fabricated type anodised etc complete all as specified and directed.

S & F 150 mm long aluminium, anodised barrel tower bolt of extruded section complete all as specified and directed

S & F of 150 mm long (Length of bolt) mild steel barrel tower bolts, stove enamelled black, with bright bolt complete all as specified and directed.

S & F in repairs of 300 mm mild steel ordinary rat tail, rod pattern springs including roller and roller plate complete all as specified and directed.

S&F 100mm size mild steel pressed handles oval type stove enameled black complete all specified and directed

S & F of 125 mm long mild steel pressed handles, oval type, stove enamelled black complete all as specified and directed.

S & F of 100mm long Extruded aluminium alloy handles, fabricated type,complete all as specified and directed. anodised complete all as specified and directed.

S & F of 250 mm long (Length of bolt) mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and directed.

S & F 250 mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast-aluminium alloy and fixed complete all as specified and directed.

S & F 75mm Hasp and staple, mild steel, wire type, stove aluminium anodised , including bolt to hinge plate and fixed with screws complete all as specified and directed

Hacking out old broken glass (any thickness size and quality and description) from wooden/steel frames glazed with putty or fixed with beads etc complete all as specified and directed

S&F 3 mm thick sheet glass ordinary quality not exceeding 0.50 sqm each pane and fixed with oil putty or with wooden beading in square etc complete all as specified and directed.

All as per Item BOQ srl item No.67.00 here-in-above but figured glass complete all as specified and directed.

M&L for PCC 1:2:4 type B1 (using 20 mm graded mecanically crushed stone aggregate) as in bed block for insertion of hold fast incl necessary form work etc complete all as specified and directed.

S&F Factory made solid PVC panelled door shutter 30mmthick (Style) consiting of frame made out of MS tubes for top & bottom rails ,MS frame shallbe covered withheat moulded plain coloured PVC 'C' channel having PVC sheet strip of 20 mm width struck inside with solvent cement for styles and palin colour PVC sheet for Toprail : panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealedto the style and rail withsuitable PVC sheet beading and jointed toghether with solvent cement etc fixed with frame at site complete all as specified and directed

S&F Solid PVC Door Frame of size 50 mm x 47 mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening complete all specified and directed

Taking down cement plaster on brick or stone walls or concrete surfaces including racking out jonts, hacking for key,scrubbing down with water etc complete all as specified and directed

M&L for Rendering 15 mm thick in CM 1:6 on fair faces of brick or concrete surfaces finished even & smooth without using extra cement complete all as specified and directed

M&L for Preparation of plastered surfaces of wall & applying three coat of white wash complete all as specified and directed.

S& F Galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperature 1.18mm as in gauze door /window/ventilators shutters complete all as specified and directed

M&L for Preparation of new wooden surfaces of any description over 10 cm width or girth & applying two coats synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for Preparation of new steel surfaces of any description over 10 cm width or girth & applying two coats synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for Preparation of newly steel surfaces of any description over 10 cm width or girth & applying two coats synthetic enamel paint complete all as specified and directed.

S&F in repair door closer hydraulically regulated, designation No 2, universal type, aluminium (Die cast body) sutable for door shutters complete all as specified and directed

Dismantling in fillets, rails, posts, rafters,purlins, etc. under 40 sq.cm in section complete all as specified and directed.

Dismantling boarding, any description, fixed in any position with nails complete all as specified and directed

S&F 18/19mm Prelaminated particle board, interior grade prelaminated both side decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and directed.

S & F IInd class hard wood fillets square cor rectanguler or tringulaer in section wrought fixed to wall with screw area exceeding 6 but not exceeding 13 sq cm complete all as specified and directed

All as per BOQ srl item No.83.00 here-in-above but area exceeding 3 Sqcm but not exceeding 6 Sqcm complete all as specified and directed

S & F 30 mm width of flap Continuous (piano) hinges,mild steel, bright finish or electrogalvanised complete all as specified and directed.

S & F hasp & staple safety type aluminium with mild steel hing pin including bolt to hinge plate and fixed with screw 100mm complete all as specified and directed

S&F in welding work in windows ventilators incl providing handle, hinges etc wherever required with easing hinges, handles and making smooth for working complete all as specified and directed.

Dismantling floor hearth or wall tiling including cement mortor bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for joint less non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed or bedding layer in CM 1:6 finished fair and even for laying floor finishes/tiles etc complete all as specified and directed.

All as per BOQ Srl item No. 89.00 here-in-above but on vertical surface as in skirting/dado including rendering 10mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 as backing coat to receive wall tiles/skirting/dados compelete all as specified and directed

M&L for coloured glazed ceramic tiles 450 x 300 x 7mm thick, on vertical surfaces such as skirting, dados and risers to steps etc set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of tiles including rendering 10mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 as backing coat to receive wall tiles/skirting/dados complete all as specified and directed .

M&L, for Vitrified tiles flooring with Light shade 10 mm thick (Square / rectangular), tiles, area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, set and jointed in neat cement slurry and pointed in white or coloured cement to match colour of tiles over and including 15 mm thick screed bed in CM (1:6) complete all as specified and as directed.

M&L for Vitrified tile, skirting/dado, light shade with 10 mm thick tiles of area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, on vertical rates as in skirting, dado, etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match colour of tiles over and including backing coat of 10 mm thick CM 1:3 complete all as specified and as directed.

Taking up or down steel tubing 15mm dia bore and connections including cleaning for refixing or removal to store complete all as specified and directed.

Taking up or down steel tubing 20mm dia bore and connections including cleaning for refixing or removal to store complete all as specified and directed.

M&L for cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting not exc 10 cm girth complete all as specified and directed

Supply & fix GI tubing 15 mm bore medium grade with all fittings and fixed to wall/ceiling or laid in floors complete all as specified and directed

Supply & fix GI tubing 20 mm bore medium grade with all fittings and fixed to wall/ceiling or laid in floors complete all as specified and directed

Material & labour for rendering 5 mm thick CM 1:3 on brick or concrete surfaces of ceiling /chajja's finished even & smooth without using extra cement complete all as specified and directed.

M & L for preparation of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed

Demolition of brickwork built in cement mortar or cement lime mortar including all quoins, arches, pillars etc complete all as specified and directed.

M&L for brick work with sub class B bricks , straight or curved on plan exc 6 m mean radius , built in cement mortor 1:6 complete all as specified and directed.

Supply and fixing in repair 20 mm dia mild steel powder coated curtain rods with wall thickness 1 mm including mild steel powder coated, bracket, holding and funnel on ends as fixed in repairs complete all as specified and directed.

S&F in repair stop valve/angle valve 15 mm dia cast copper alloy high pressure with crutch or butter fly handle screwed for iron pipe or union and fixed complete all as specified and directed.

S & F in repairs vitreous china squatting pan "orissa pattern" size 580X 440 mm white with integral foot rest (excluding flushing cistern and flush pipe) complete all as specified and directed

S&F in repairs 32/40mm dia 3ft long PVC flexible waste pipe suitable for WHBs / sinks with couplings, etc. complete all as specified and as directed

M & L for Granite tiles 20 mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite including grinding and polishing on 15 mm thick screed bed in CM 1: 6 complete all as specified and directed.

M&L for PVC (SWR) pipe single socketed in any length with rubber ring joints fixed to wall and in trench 110mm bore, incl taking down of existing Pipe complete all as specified and directed.

S&F PVC (SWR) bends any radius 110 mm bore, complete all specified and directed

S & F MS galvanised clamp of size 20x 0.80 mm made out of MS GI sheet sutable for 110 mm dia including drilling holes & fixed to wall with nails, complete all specified and directed

M&L for PVC (SWR) junction single (Single T)equal or unequal 110mm bore, complete all as specified and directed.

S&F in repair PVC floor trap/Nanhi Trap with plain/single hole CP grating including jointing to waste pipe in cement joint, of outlet 75 mm.dia, complete all specified and directed

S&F in repair PVC P Trap and joining to 110 mm pipe complete all specified and directed

S&F in repair PVC S Trap and joining to 110 mm pipe complete all specified and directed

Dismantling brick tiles single layer on roofs complete all as specified and directed.

Demolition of mud in roof any thickness including plaster & leaping whether full thickness removed or part thereof complete all as specified and directed.

Material and labour PCC 1:2:4 type B-1 (using 20mm graded mechanically crushed stone aggregate) laid over roof slab as in padding to make good the depressions complete all as specified and directed.

Material and labour for 15 mm thick cement plaster in CM 1:4 on other side of lathing as in roofs finished the surface even and smooth without using extra cement complete all as specified and directed.

Material and labour for treatment consisting of a coat of bituminous primer @ 0.40 litre per square metre, thereafter provision of tack coat of industrial bitumen 85/25 grade @ 1.20 kg per square metre and layer of APP based modified prefabricated five layers polymeric membrane minium 3 mm thick, weighing not less than 3.6 kg/sqm, black, finished, reinforced with non woven polyster matt fabric (weighing not less than 150 gram/sqm) with side and end laps applied over roofs complete all as specified and directed. Note :- i)The water proofing treatment shall be got carried out by the manufacturer or their authorised applicators duly approved by GE in writing. (ii) 5% amount of the total amount of water proofing treatment shall be retained as a guarantee (on account of any defect raised/noticed during a period of ten years) and shall be released after 10 years of completion of work. However contractor may deposit the FDR of same amount in favour of GE. If contractor fails to rectify the defect pointed out during this period , the defect shall be got rectified at contractor's risk and cost and the payment shall be made from the amount kept reserved or by encashing the FDR deposited by the contractor as guarantee. The contractor's quoted rates for this item shall deemed to be inclusive of this aspect.

Material and labour for 40mm thick brick tiles bedded and jointed on 15 mm thick cement screed 1:6 and jointed grouted flush in cement mortor 1:3, complete all as specified and directed.

All as per BOQ srl item No 120.00 here in before but except tiles (Old serviceable tiles obtained from BOQ Srl item No 110 here in before)

Material and labour for PCC 1:2:4 type B-0 (using 12.5 mm graded mechanically crushed stone aggregate) as in roof kerbs (gola) complete all as specified and directed.

M&L for removing any kind of vegetative/plant growth on roof tops,chajja,parapets etc of bldgs and repairing the area with cement plaster CM 1:4 incl WPC and brickwork wherever required complete all specified and directed

M & L for 100 mm thick cement concrete 1:4:8 type D 2 (using 40 mm graded mechanically crushed stone aggregate ) as in sub base, finished even and rough to receive the topping layer for hard standing complete all as specified and directed.

M & L for sand filling under floors or in foundations including watering and consolidation complete all as specified and directed

M & L for Rubber moulded machine pressed designer coloured precast concrete with grey cement and pigment interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 grade complete all as specified and directed

M & L for screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in cement mortar 1:6 complete all as specified and directed .

M & L for chequred tiles 300 x 300 x 25 mm thick, rubber finished, set jointed and pointed in neat and cement slurry in floors with grey cement and pigment complete all as specified and directed .

M&L for providing precast cement concrete louvres and jallies, 35mm thick (measured solid), including all mouldings but excluding frame set in CM 1:4 complete all as specified and directed.

Anil jindal and sons

MARKANDESHWAR BUILDERS AND GOVT CONTRACTORS

M/s Guddu Builders

Swami Enterprises