SPECIAL REPAIR TO ROOF TREATMENT, MUMTY, MACHINE ROOMS, WATER TANKS AND OTHER CONNECTED WORKS AT ISSA LAB (BLDG NO.M147) UNDER GE (I) RnD DELHI

Demolishing brick tiles covering in terracing including stacking of serviceable material and disposal of unserviceable material outside MoD land complete all as specified and directed.

Demolishing mud phaska in terracing and disposal of material outside MoD land complete all as specified and directed.

Roughening of surfaces of old concrete slab by wire brushing, sweeping, cleaning and washing down with water to remove all loose dust etc. and brushing neat cement slurry @ 3.00 kg/Square Metre on roof surface, etc complete all as specified and directed .

Wire Control module, 100% soft addressed, integral short circu

Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer 3 mm thick water proofing membrane, black finished reinforced with non-woven polyester matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the same membrane manufacture of density at 25°C, 0.87-0.89 kg/ litre and viscocity 70-160 cps. Over the primer coat the layer of membrane shall be laid using Butane Torch and sealing all joints etc, and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23°C as 650/ 450N/ 5cm. Tear strength in longitudinal and transverse direction as 300/ 250N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane 3 mm thick complete all as specified and directed.

Providing and fixing Heat Resistant Terrace Tiles (300 mm x 300 mm x 20 mm) with SRI (solar refractive index) > 78, solar reflection > 0.70 and initial emittance > 0.75 on waterproof and sloped surface of terrace, laid over and including 20 mm thick cement sand mortar in the ratio of 1:4 using liquid water proofing compound as per manufacturers instructions(1 cement : 4 coarse sand) and grouting the joints with mix of white cement & marble powder in ratio of 1:1, including rubbing and polishing of the surface upto 3 cuts complete, including providing skirting upto 150 mm height along the parapet walls in the same manner complete all as specified and directed.

solators, SPDT relay contact to drive sounders load

Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design In 75x75 mm deep chase complete all as specified and directed.

Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete all as specified and directed.

M&L for Applying primer With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works and applying two coats of synthetic enemel paint complete all as specified and directed

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats with shutters architrave, holdfasts etc. complete and stacking within 50 metres lead of area 3 sq. metres and below all as specified and directed.

Providing and fixing ISI marked 35 mm thick flush door shutters conforming to IS :2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters including ISI marked Stainless Steel butt hinges complete all as specified and directed

Providing and fixing aluminium tower bolts 200x10 mm, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete all as specified and directed

Providing and fixing aluminium handles,150 mm size ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete all as specified and directed

Applying priming coat With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) and applying two coats of synthetic enemel paint complete all as specified and directed

Dismantling 15 to 40 mm dia G.I. pipe including stacking of dismantled pipes (within 50 metres lead) as per direction of Engineerin-Charge.

Providing and fixing false ceiling tiles at all heights with GRG(Glass fibre Reinforced Gypsum) with semi perforated 12 mm thick micro tegular edged GRG false ceiling of size 595X595 mm of approved texture, design and patterns having moisture content less than 2%,humidity resistance of 99%,NRCO.50 to 0.75 as per IS 8225:1987,Noncombustible as per BS 476(part-4)-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended or interlocking metal T grid of hot dipped galvanized iron section of 0.33 mm thick(galvanized @120 gms per sqm including both sides) comprising of main T runner of size 15X32 mm of length 3000 mm, cross T of size 15X32 mm of length 600 mm to form grid module of size 600x600mm,suspended from ceiling using galvanized mild steel items( galvanizing @80 gms per Sqm) i.e 50 mm long,8 mm outer dia meter M-6 dash fastners,6 mm dia fully threaded hanger rod up to 1000 mm length and L-shape level adjuster of size 85X25X2mm. Galvanized iron perimeter wall angle of size 24X24X0.40mm of length 3000 mm to be fixed on periphery wall/partition with the help of plastic rawl plugs at 450 mm centre to centre and 40 mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of Engr-In-charge complete all as specified and directed.

complete Removing dry or oil bound distemper and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete all as specified and directed

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade Two or more coats on old work over an under coat of suitable shade with ordinary paint of approved brand and manufacture complete all as specified and directed

Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand). Dark shade pigment using ordinary cement all as specified and directed

Per Point

Per Point

Per Point

Per Point

Per RM

Supply and fix modular socket 6 amp-2/3 pin combined 2 module complete all as specified and directed

M&L of modular socket 6 A/16 amp -2/3 pin combined 2 module complete all as specified and directed

S&F Ceiling rose, 3 pin/PVC/polycarbonate, isolated body complete all as specified and directed.

Supply and fixing in replacement of old MCCB VTPN distribution board double door vertical type made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating, suitable for MCCB of capacity 125 Amps, 25 KA as incommer 8 way 415 volts with 200 Amps rated busbar adjustable thermal 70% to 100%) and fixed magnetic setting type complete all as specified and directed

Supply and fix MCCB four pole 415 volts 50 Hzs 125 Amps with 25KA repturing capacity complete all as specified and directed

M&L Taking down of ceiling fan of 1200/1400 mm sweep size rewinding with the existing wire gauge, replacing bearing, bushes and painting with two coats of white/existing paint and marking the MES number complete all as specified and directed.

M&L Taking down of exhaust fan of any type/size rewinding with the existing wire gauge, replacing bearing. bushes and painting with two coats of white/existing paint and marking the MES number complete all as specified and directed.

M&L for taking out window type AC of capacity 1.5/2 Ton of invertor/ nonivertor type or any modal and make at site, after disconnecting all electrical connection from multi-story building and re-installation Servicing, cleaning (Dry and Wet), including gas charging R-22/R-32 refrigrant gas charging, inspection and testing of Split type Air condineer of capacity 2/1.5 Ton of invertor/ nonivertor type or any modal and make at site coating in proper alignment/balancing and tightening of new GI nuts, bolts and washers alongwith anti-vibration pad complete all as specified and directed.

S&F in replacement energy efficient LED light fitting surface mounted 4' long, 20 watt, 240 volts, 50 hz made out of extrunded aluminium housing with acrylic diffuser, LM 80 certified LED, costant current out put of electronic driver of operating voltage 140v to 270v and temperature - 10 degree centigrade to 50 degree centigrade with ingress protection IP 20 duly pre wired with insulated copper wire, PF>0.80 with efficiency 120 lumins/watt and TDH less than 10%, CRI > 80 degree , CCT 6500 K in and including connecting up with twin core copper flexible cable of suitable size upto ceiling rose complete all as specified and directed.

S&F in replecement energy efficient LED light fitting, slim LED panel, recessed mounting 2 ftx 2 ft made out of power coated CRCA sheet with acrylic diffuser, constant current output of electronic driver operating voltage range of 150 to 270 volts AC, PF>0.80, high powder LEDs having efficiency of 100-120 lumins/watts, junction temparature less than 85 degree C and TH less than 12 % and CCT 6500K,, CRI>80 suitable for 36 watt LED, LM 80 certified LM, pri wired in and including connecting up with twin core copper flexible cable of suitable size upto ceiling rose /connector etc and testing complete all as specified and directed.

S&F in replecement energy efficient LED light fitting, slim LED panel, surface mounting 2'x2' made out of power coated CRCA sheet with acrylic diffuser, constant current output of electronic driver operating voltage range of 150 to 270 volts AC, PF>0.80, high powder LEDs having efficiency of 100-120 lumins/watts, junction temparature less than 85 degree C and TH less than 12 % and CCT 6500K, CRI>80 suitable for 36 watt LED, LM 80 certified LM, pri wired in and including connecting up with twin core copper flexible cable of suitable size upto ceiling rose /connector etc and testing complete all as specified and directed.

M&L Rigid non-metallic PVC conduit exclusive of boxes (junction/ terminal) but inclusive of all tees, bends elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, sddles,pipe hooks etc. including taking down old pvc conduit complete all as specified and directed . ,

Each Job

Each Set

Each Job

Each Set

Supply & laying GI pipe light grade 25mm dia passing through wall, flooring and ceiling or drain complet all as specified and directed.

M&L for Cement concrete in surface channels and drains Type C2 1:3:6 complete all as specified and directed

S&F in replacement of 63 mm dia instantaneous pattern SS (Stainless Steel) Short branch pipe. 20 mm dia nozzle conforming to IS 903 suitable for inter connection to hose pipe coupling complete all as specified & directed

S&F in replacement of Non-percolating rubber reinforced lined fire hose pipe (as per IS 636) Type A of 63 mm dia and length as described below The hose shall be rated for burst pressure of 35 7 Kg/Sqcm Hose shall be complete with ISI marked SS male & female coupling (IS 903) bound & riveted to hose pipe with aluminum rivets $15 mm Gl wire (For Internal Hydrant & External Hydrant) complete all as specified & directed

S&F in replacement of Cast Iron Air Valves with two air Outlets, conforming to IS 14845 of size 100 mm dia bore and fixing up in Cast Iron Water supply mains of size 100 mm dia complete all as specified & directed

S&F in replacement of old unserviceable Pressure gauge 4” dial 0-14Kgs rating complete all as specified & directed.

M&L for preparation of new steel surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Excavation in trenches in soft/loose so not exceeding 1.5 Mtr wide and not exceeding 1.5 Mt in depth and getting out complete all as specified and directed.

Returning, filling in and including spreading levelling, watering and well ramming in layers not exceeding 25cm thick to achieve desired compactness complete all as specified & directed.

Removing surplus excavated materials to a distance n. exe 50 m and depositing where directed at a level n. exc 1.5 m above the starting point complete all as specified & directed.

M&L for Removing excavated material exc. 1.50 km but n exc. 5 km and depositing where directed complete all as specified and directed

畳敲‬潨楲潺瑮污映潯⁴潭湵整⁤祴数眠瑩⁨汃獡⵳楆獮汵瑡潩Ɱ挠湯潦浲湩⁧潴䤠ⵓ㈳‵ਮ䐨 卍映扡楲慣整⁤潃浭湯戠獡⁥汰瑡⁥潣灵楬杮挠畯汰湩⁧畧牡⁤潦湵慤楴湯戠汯獴攠捴‮獡爠煥極敲⹤⠊⥅匠極慴汢⁥散敭瑮挠湯牣瑥⁥潦湵慤楴湯搠汵⁹汰獡整敲⁤楷桴愠瑮⁩楶牢瑡潩慰獤ㄠ㈶‰灩瑡㔠‶效摡〮䄨 敒慰物漠⁦楤獥汥攠杮湩⁥㘱䡂⁐牤癩湥洠楡楦敲瀠浵⁰畳瑩扡敬映牯愠瑵浯瑡捩漠数慲楴湯愠摮挠湯楳瑳湩⁧景映汯潬楷杮‮潣灭敬整椠污敲灳捥獴‬獡爠煥極敲⁤䐨敩敳牄癩湥倠浵⥰ਮ䈨 潈楲潺瑮污琠灹ⱥ洠汵楴瑳条ⱥ挠湥牴晩杵污瀠浵⁰景挠獡⁴景椠潲潢祤愠摮戠潲穮⁥浩数汬牥眠瑩⁨瑳楡汮獥⁳瑳敥桳晡ⱴ洠捥慨楮慣敳污挠湯潦浲湩⁧潴䤠⁓㔱〲ਮ䌨 㘱䈠偈ㄠ〵‰偒⁍慷整⁲潣汯摥眠瑩⁨慲楤瑡牯搠敩敳湥楧敮挠湯潦浲湩⁧潴爠汥癥湡⁴卉猠慴摮牡⁤潣灭敬整眠瑩⁨畡潴猠慴瑲湩⁧敭档湡獩Ɑㄠ⼲㐲瘠汯獴攠敬瑣楲⁣瑳牡楴杮攠畱灩敭瑮‬楤獥汥琠湡Ⱬ攠桸畡瑳瀠灩⁥硥整摮摥甠瑰〱洠漠瑵楳敤瀠浵⁰潨獵⁥畤祬椠獮汵瑡摥眠瑩⁨〵洠桴捩汧獡⁳潷汯眠瑩⁨〱洠桴捩污浵湩畩桳敥⁴汣摡楤杮‮敲楳敤瑮慩楳敬据牥‬湩瑳畲敭瑮⁳湡⁤牰瑯捥楴湯愠⁳数⁲瑳湡慤摲猠数楣楦慣楴湯‬瑳灯猠汯湥楯⁤潦⁲畡潴猠潴⁰湩琠敨攠敶瑮漠⁦慦汵⁴楷桴愠摵潩椠摮捩瑡潩獮‬慰湩整⁤楷桴瀠獯⁴景楦散爠摥挠汯畯⁲瑥⁣獡爠煥極敲⹤⠊⥄䴠⁓慦牢捩瑡摥‬潣浭湯戠獡⁥汰瑡ⱥ挠畯汰湩Ⱨ挠畯汰湩⁧畧牡⁤潦湵慤楴湯戠汯獴攠捴愠⁳敲畱物摥ਮ䔨 畓瑩扡敬挠浥湥⁴潣据敲整映畯摮瑡潩畤祬瀠慬瑳牥摥愠摮眠瑩⁨湡楴瘠扩慲楴湯瀠摡⁳㘱〲䤠浰愠⁴㘵洠䠠慥⹤˵⠀⥁删灥楡⁲景攠敬瑣楲⁣牤癩湥瀠敲獳牵獩瑡潩異灭猠極慴汢⁥潦⁲畡潴慭楴⁣灯牥瑡潩湡⁤潣獮獩楴杮漠⁦潦汬睯湩⹧挠浯汰瑥⁥湩愠汬爠獥数瑣ⱳ愠⁳敲畱物摥›䨨捯敫⁹畐灭⸩⠊⥂䠠牯穩湯慴祴数‬畭瑬獩慴敧‬散瑮楲畦慧異灭漠⁦慣瑳椠潲潢祤愠摮戠潲穮⁥浩数汬牥眠瑩⁨瑳楡汮獥⁳瑳敥桳晡⁴敭档湡捩污猠慥潣普牯業杮琠卉ㄠ㈵⸰⠊⥃㜠㔮䠠⁐煳極敲汬挠条⁥湩畤瑣潩潭潴⁲䕔䍆琠灹⁥畳瑩扡敬映牯瀠潲整瑣潩潦⁲湥汣獯牵ⱥ栠牯穩湯慴潦瑯洠畯瑮摥琠灹⁥楷桴䌠慬獳䘭漠数慲楴湯漠ㄴ‵潶瑬ⱳ㌠瀠慨敳㔠‰穈䄠⁃畳灰祬眠瑩⁨偉㔠‵汣獡⁳景椠獮汵瑡潩Ɱ挠湯潦浲湩⁧潴䤠㩓㈳⸵⠊⥄䴠匠映扡楲慣整⁤潃浭湯戠獡⁥汰瑡ⱥ挠畯汰湩Ⱨ挠畯汰湩⁧畧牡⹤映畯摮瑡潩潢瑬⁳瑥⁣獡爠煥極敲⹤⠊⥅匠極慴汢⁥散敭瑮挠湯牣瑥⁥潦湵慤楴湯搠汵⁹汰獡整敲⁤湡⁤楷桴愠瑮⁩楶牢瑡潩慰獤㌠〰䤠浰愠⁴㘵洠䠠慥⹤ï䴀䰦映牯瀠潲楶楤杮†敃敭瑮挠湯牣瑥⁥㨱㨲‴ㄨ挠浥湥⁴›′潣牡敳猠湡⁤›‴牧摡摥猠潴敮愠杧敲慧整㈠洰潮業慮楳敺 潲景映牯眠瑡牥瀠潲景湩⁧牴慥浴湥⁴楷桴†獡椠慰摤湩⁧湯爠潯ⱦ牰橯捥楴湯⁳景爠潯⁦瑥⁣挠浯汰瑥⁥污獡猠数楣楦摥愠摮搠物捥整⹤ā䐀浥汯獩楨杮戠楲正眠牯畢汩⁴湩†湉挠浥湥⁴潭瑲牡洠湡慵汬⽹戠⁹敭档湡捩污洠慥獮椠据畬楤杮猠慴正湩⁧景猠牥楶散扡敬洠瑡牥慩湡⁤楤灳獯污漠⁦湵敳癲捩慥汢⁥慭整楲污漠瑵楳敤䴠䑯氠湡⁤獡瀠牥搠物捥楴湯漠⁦湅楧敮牥椭⵮档牡敧挠浯汰瑥⁥污獡猠数楣楦摥愠摮搠物捥整⹤Ą䴀䰦䈠楲正眠牯楷桴挠浯潭畢湲⁴汣祡䘠倮匮‮渨湯洠摯汵牡 牢捩獫漠⁦汣獡⁳敤楳湧瑡潩⸷‵湩猠灵牥瑳畲瑣牵⁥扡癯⁥汰湩桴氠癥汥甠⁰潴映潬牯嘠氠癥汥椠污桳灡獥愠摮猠穩獥椠敃敭瑮洠牯慴⁲㨱‶ㄨ挠浥湥⁴›‶潣牡敳猠湡⥤†潣灭敬整愠汬愠⁳灳捥晩敩⁤湡⁤楤敲瑣摥楄浳湡汴湩⁧牯琠歡湩⁧潤湷漠摬瀠慬瑳牥漠⁲歳物楴杮爠歡湩⁧畯⁴潪湩獴愠摮挠敬湡湩⁧桴⁥畳晲捡⁥潦⁲汰獡整⁲湩汣摵湩⁧楤灳獯污漠⁦畲扢獩⁨潴琠敨搠浵楰杮朠潲湵⁤楷桴湩㔠‰敭牴獥氠慥⁤潣灭敬整愠汬愠⁳灳捥晩敩⁤湡⁤楤敲瑣摥献䴠䰦ㄠ‵浭挠浥湥⁴汰獡整⁲湯戠楲正眠污獬漠⁦業⁸㨱‴ㄨ挠浥湥㩴㐠映湩⁥慳摮 潣灭敬整愠汬愠⁳灳捥晩敩⁤湡⁤楤敲瑣摥献䴠䰦ㄠ‵浭挠浥湥⁴汰獡整⁲湯戠楲正眠污獬漠⁦業⁸㨱‶ㄨ挠浥湥㩴㘠映湩⁥慳摮 潣灭敬整愠汬愠⁳灳捥晩敩⁤湡⁤楤敲瑣摥甮♍⁌敲摮牥湩⁧㈱浭琠楨正漠散汩湩⁧湩挠浥湥⁴潭瑲牡ㄠ㌺眠瑩⁨⁡汦慯楴杮挠慯⁴潣灭敬整愠汬愠⁳灳捥晩敩⁤湡⁤楤敲瑣摥섮♍⁌潦⁲挠楨灰湩⁧景 spalled and loose concrete and cleaning rust from reinforement by sand blasting scrubbing down concrete surface with wire brushes cleaning with water allowed to dry and applying a layer of zinc rich epoxy primer as antirust on all exposed reinforcement followed by a layer of bounding coat of approved epoxy adheisve on complete exposed surfaces of concrete to be gunited all as specified and applying two layers of guniting over steel welded mesh 2mm dia of wire and aperature 75mm, avarage thickness of gunite n.exc 40mm thick in cement mortor (1:2) using OPC 43 grade cement mixed with polycrete admixture @ 7% by weight of cement or as per manufacturer instructions and finally applying cement plaster over gunite surface of required thickness to give even uniform and smooth finish conforming to proper geometrics in cement mortor (1:3) to match the existing surface as in sides and soffits etc of slabs, chajjas, fins, facias,parapets, lintels, columns and beams etc complete including necessary scaffolding, shuttering, necessary chases to brick work or RCC members at any height upto 6 storey building including removing of small trees shrubs etc complete all as specified and directed.–
Providing and laying cement concrete in parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing: 1:1½:3 (1 cement : 1½ coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) complete all as specified and directed.³Dismantling steel work in single sections including dismembering and stacking within 50 metres lead in Channels, angles, tees and flats etc complete all as specified and directed.‚
Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer complete all as specified and directed.öS&F Structural steel work in single section, as in doors,gate etc fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer complete all as specified and directed.
Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) Aluminium works For frame and shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) complete all as specified and directed.P
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm) complete all as specified and directed.?
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately) of Second class teak wood complete all as specified and directed.2
Providing and fixing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) complete all as specified and directed.êProviding and fixing Brass 100mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete all as specified and directed.çProviding and fixing in repair Brass 100mm mortice latch and lock with 6 levers with pair of handles (best make of approved quality) for doors including necessary cutting and making good etc. complete all as specified and directed.
Providing and fixing aluminium sliding door bolts,300X16 mm size ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc complete all as specified and directed.ñ Disconnecting damaged overhead/terrace PVC water storage tank of any size from water supply line and removing from the terrace including shifting at ground level as per direction of Engineer-in-charge complete all as specified and directed.D
Providing and placing 1000 Ltr capacity on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank complete all as specified and directed.¸Providing and fixing G.I. pipes 25 mm dia nominal bore with G.I. fittings and clamps,i/c cutting and making good the walls etc. Exposed on wall complete all as specified and directed. ¸Providing and fixing G.I. pipes 40 mm dia nominal bore with G.I. fittings and clamps,i/c cutting and making good the walls etc. Exposed on wall complete all as specified and directed. —Providing and fixing 25 mm nominal bore gun metal gate valve with C.I. wheel of approved quality (screwed end) complete all as specified and directed.–Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) 40 mm nominal bore complete all as specified and directed.
Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge complete all as specified and directed.ùM&L for Finishing walls with Acrylic Smooth exterior paint of required shade on New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and directed.,
M&L Distempering two coats with 1st quality acrylic distemper, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even

OUTGOINGS: - Star Delta Starter upto 50 HP Each having the following-2 Nos (Main Pump) (a) MCCB 125 A 25 KA 3 Pole Thermal Magnetic 01 No (b) Contactor 70 A TP (Main & Delta) 02 Nos (c) Contactor 50 A TP (Star) 01 No. (d) B1 Metal Over Load relay 30-50 A - 01 No. (e) Star delta timer Micon Series- 01 No. (f) Digital Amp Meter (0-100A)- 01 No. (g) CT 100/5A - 01 No. (h) Single Phase Preventer- 01 No. (i) Push button Start/Stop with Elements - 02 Nos. (j) On Off Top indicating Lights LED type 220 V AC-1 Set (Set of three). (k) Aux. Blocks 1 No + 1 No - 1 Set. Star Delta Starter 7.5 HP Each having the following 1 No. (Jockey Pump) (a) MCB 32 A 10 KA 3 Pole C Curve 01 No (b) Contactor 18 ATP (Main & Delta) - 02 Nos (c) Contactor 12 ATP (Star) 01 No. (d) B1 Metal Over Load relay 6-10 A-01 No (e) Star delta timer Micon Series 01 No (f) Digital Amp Meter (0-30A) - 01 No (g) CT 30/5 A-01 No. (h) Single Phase Preventer - 01 No. (i) Push button Start/Stop with Elements - 02 Nos (j) On, Off, Trip indicating Lights LED type 220 V AC-1 Set (Set of three) (k) Aux. Blocks 1 No + 1 No - 1 Set.

Notes: - 1. Provison for Auto/Manual Mode incase of Auto failure 2. Control circuit for Pressure Maintain via Pressure Switch" "The panel manufacturer shall have following Govt. Approved Certificates: 1. CPRI Certification Degree of Protection IP-54 (should have IEC 60439-1 test) 2 CPRI Short Circuit withstand strenght should be 50k Arms for 10 Sec with intial peak of 105kA 3. CPRI Certification Rated current for short circuit not less than 4000 A with rated insulation voltage 660V 4. ISO 9001 CERTIFIED 5. The contractor shall be submit detailed drawing of panel with showing all fittings and accessones for approval of GE (1

湯映牯漠数慲楴杮爠汯楬杮猠畨瑴牥⁳硅散摥湩⁧〱〮‰煳湡⁤灵潴ㄠ⸶〸猠浱椠桴⁥牡慥挠浯汰瑥⁥污獡猠数楣楦摥愠摮搠物捥整⹤i倀潲楶楤杮愠摮映硩湩⁧〱‰浭猠湡⁤慣瑳䤠潲牧瑡湩⁧潦⁲畧汬⁹牴灡挠浯汰瑥⁥污獡猠数楣楦摥愠摮搠物捥整⹤³䐀獩慭瑮楬杮䌠䤮‮牯愠扳獥潴⁳慲湩眠瑡牥瀠灩⁥楷桴映瑩楴杮⁳湡⁤汣浡獰椠据畬楤杮猠慴正湩⁧桴⁥慭整楲污眠瑩楨〵洠瑥敲⁳敬摡ㄠ〰洠楤⁡楰数挠浯汰瑥⁥污獡猠数楣楦摥愠摮搠物捥整⹤²䐀獩慭瑮楬杮䌠䤮‮牯愠扳獥潴⁳慲湩眠瑡牥瀠灩⁥楷桴映瑩楴杮⁳湡⁤汣浡獰椠据畬楤杮猠慴正湩⁧桴⁥慭整楲污眠瑩楨〵洠瑥敲⁳敬摡㜠‵浭搠慩瀠灩⁥潣灭敬整愠汬愠⁳灳捥晩敩⁤湡⁤楤敲瑣摥訮牐癯摩湩⁧湡⁤楦楸杮猠楯ⱬ眠獡整愠摮瘠湥⁴楰数⁳〱‰浭搠慩匠湡⁤慣瑳椠潲♓⁓楰数愠⁳数⁲卉›㜱㤲挠浯汰瑥⁥污獡猠数楣楦摥愠摮搠物捥整⹤‰倀潲楶楤杮愠摮映硩湩⁧潳汩‬慷瑳⁥湡⁤敶瑮瀠灩獥㜠‵浭搠慩匠湡⁤慣瑳椠潲♓⁓楰数愠⁳数⁲卉›㜱㤲挠浯汰瑥⁥污獡猠数楣楦摥愠摮搠物捥整⹤Ŵ倀潲楶楤杮愠摮映硩湩⁧⹍⹓栠汯敤⵲慢⁴汣浡獰漠⁦灡牰癯摥搠獥杩潴匠湡⁤慃瑳椠潲⽮慣瑳椠潲猨異⥮瀠灩⁥浥敢摤摥椠湡⁤湩汣摵湩⁧散敭瑮挠湯牣瑥⁥汢捯獫ㄠ砰〱ㅸ‰浣漠⁦㨱㨲‴業⁸ㄨ挠浥湥⁴›′潣牡敳猠湡⁤›‴牧摡摥猠潴敮愠杧敲慧整㈠‰浭渠浯湩污猠穩⥥‬湩汣摵湩⁧潣瑳漠⁦畣瑴湩⁧潨敬⁳湡⁤慭楫杮朠潯⁤桴⁥慷汬⁳瑥⁣潆⁲〱‰浭搠慩瀠灩⁥潣灭敬整愠汬愠⁳灳捥晩敩⁤湡⁤楤敲瑣摥献
牐癯摩湩⁧湡⁤楦楸杮䴠匮‮潨摬牥戭瑡挠慬灭⁳景愠灰潲敶⁤敤楳湧琠慓摮䌠獡⁴物湯振獡⁴物湯⠠灳湵 楰数攠扭摥敤⁤湩愠摮椠据畬楤杮挠浥湥⁴潣据敲整戠潬正⁳〱ㅸ砰〱挠景ㄠ㈺㐺洠硩⠠‱散敭瑮㨠㈠挠慯獲⁥慳摮㨠㐠朠慲敤⁤瑳湯⁥条牧来瑡⁥〲洠潮業慮楳敺Ⱙ椠据畬楤杮挠獯⁴景挠瑵楴杮栠汯獥愠摮洠歡湩⁧潧摯琠敨眠污獬攠捴䘠牯㜠‵浭搠慩瀠灩⁥潣灭敬整愠汬愠⁳灳捥晩敩⁤湡⁤楤敲瑣摥褮牐癯摩湩⁧湡⁤楦楸杮瀠慬湩戠湥⁤景爠煥極敲⁤敤牧敥ㄠ〰洠楤⁡慓摮挠獡⁴物湯匠匦愠⁳数⁲卉ⴠㄠ㈷‹潣灭敬整愠汬愠⁳灳捥晩敩⁤湡⁤楤敲瑣摥툮牐癯摩湩⁧湡⁤楦楸杮戠湥⁤景爠煥極敲⁤敤牧敥眠瑩⁨捡散獳搠潯Ⱳ椠獮牥楴湯爠扵敢⁲慷桳牥㌠洠桴捩Ⱬ戠汯獴愠摮渠瑵⁳潣灭敬整ㄠ〰洠楤⁡匠湡⁤慣瑳椠潲♓⁓獡瀠牥䤠⁓‭㜱㤲挠浯汰瑥⁥污獡猠数楣楦摥愠摮搠物捥整⹤Ò 牐癯摩湩⁧湡⁤楦楸杮戠湥⁤景爠煥極敲⁤敤牧敥眠瑩⁨捡散獳搠潯Ⱳ椠獮牥楴湯爠扵敢⁲慷桳牥㌠洠桴捩Ⱬ戠汯獴愠摮渠瑵⁳潣灭敬整㜠‵浭搠慩†慓摮挠獡⁴物湯匠匦愠⁳数⁲卉ⴠㄠ㈷‹潣灭敬整愠汬愠⁳灳捥晩敩⁤湡⁤楤敲瑣摥牐癯摩湩⁧湡⁤楦楸杮搠畯汢⁥煥慵番据楴湯漠⁦敲畱物摥搠来敲⁥楷桴愠捣獥⁳潤牯‬湩敳瑲潩畲扢牥眠獡敨⁲″浭琠楨正‬潢瑬⁳湡⁤畮獴挠浯汰瑥⁥ㄠ〰ㅸ〰ㅸ〰ㅸ〰洠慓摮挠獡⁴物湯匠匦愠⁳数⁲卉ⴠㄠ㈷‹潣灭敬整愠汬愠⁳灳捥晩敩⁤湡⁤楤敲瑣摥牐癯摩湩⁧湡⁤楦楸杮搠畯汢⁥煥慵番据楴湯漠⁦敲畱物摥搠来敲⁥楷桴愠捣獥⁳潤牯‬湩敳瑲潩畲扢牥眠獡敨⁲″浭琠楨正‬潢瑬⁳湡⁤畮獴挠浯汰瑥⁥㜠堵㔷㝘堵㔷洠慓摮挠獡⁴物湯匠匦愠⁳数⁲卉ⴠㄠ㈷‹潣灭敬整愠汬愠⁳灳捥晩敩⁤湡⁤楤敲瑣摥鸮牐癯摩湩⁧敬摡挠畡歬摥樠楯瑮⁳潴猠湡⁤慣瑳椠潲⽮散瑮楲畦慧汬⁹慣瑳⠠灳湵 物湯瀠灩獥愠摮映瑩楴杮⁳景搠慩敭整⁲›〱‰浭挠浯汰瑥⁥污獡猠数楣楦摥愠摮搠物捥整⹤倀潲楶楤杮氠慥⁤慣汵敫⁤潪湩獴琠慳摮挠獡⁴物湯振湥牴晩杵污祬挠獡⁴猨異⥮椠潲楰数⁳湡⁤楦瑴湩獧漠⁦楤浡瑥牥㨠㜠‵浭挠浯汰瑥⁥污獡猠数楣楦摥愠摮搠物捥整⹤ž倀潲楶楤杮愠摮映硩湩⁧⹍⹓猠慴獹愠摮挠慬灭⁳潦⁲慳摮挠獡⁴物湯 散瑮楲畦慧汬⁹慣瑳⠠灳湵 物湯瀠灩獥漠⁦楤浡瑥牥ㄠ〰洠潣灭敬整愠汬愠⁳灳捥晩敩⁤湡⁤楤敲瑣摥鸮牐癯摩湩⁧湡⁤楦楸杮䴠匮‮瑳祡⁳湡⁤汣浡獰映牯猠湡⁤慣瑳椠潲⽮挠湥牴晩杵污祬挠獡⁴猨異⥮椠潲楰数⁳景搠慩敭整⁲㜠‵浭挠浯汰瑥⁥污獡猠数楣楦摥愠摮搠物捥整⹤Ĭ倀楡瑮湩⁧慳摮挠獡⁴物湯 散瑮楲畦慧汬⁹慣瑳⠠灳湵 物湯猠楯ⱬ眠獡整瘠湥⁴楰数⁳湡⁤楦瑴湩獧眠瑩⁨睴潣瑡⁳景猠湹桴瑥捩攠慮敭慰湩⁴景愠祮挠汯畯⁲畳档愠⁳档捯汯瑡⁥牧祥‬牯戠晵⁦瑥⹣漠敶⁲⁡潣瑡漠⁦牰浩牥⠠景愠灰潲敶⁤畱污瑩⥹映牯渠睥眠牯㔷洠楤浡瑥牥瀠灩⁥潣灭敬整愠汬愠⁳灳捥晩敩⁤湡⁤楤敲瑣摥⴮
慐湩楴杮猠湡⁤慣瑳椠潲⽮挠湥牴晩杵污祬挠獡⁴猨異⥮椠潲潳汩‬慷瑳⁥敶瑮瀠灩獥愠摮映瑩楴杮⁳楷桴琠潷挠慯獴漠⁦祳瑮敨楴⁣湥浡汥瀠楡瑮漠⁦湡⁹潣潬牵猠捵⁨獡挠潨潣慬整朠敲ⱹ漠⁲畢晦攠捴‮癯牥愠挠慯⁴景瀠楲敭⁲漨⁦灡牰癯摥焠慵楬祴 潦⁲敮⁷潷歲ㄠ〰洠楤浡瑥牥瀠灩⁥潣灭敬整愠汬愠⁳灳捥晩敩⁤湡⁤楤敲瑣摥伮♓⁆慃瑳椠潲潣汷琠楰数⁳〱‰浭猠穩⁥潣灭敬整愠汬愠⁳灳捥晩敩⁤湡⁤楤敲瑣摥丮♓⁆慃瑳椠潲潣汷琠楰数⁳㔷洠楳敺挠浯汰瑥⁥污獡猠数楣楦摥愠摮搠物捥整⹤Ă䐀浥汯獩楨杮挠浥湥⁴潣据敲整丠浯湩污挠湯牣瑥⁥㨱㨳‶牯爠捩敨⁲業⁸椨振攠畱癩污湥⁴敤楳湧洠硩 慭畮污祬 祢洠捥慨楮慣敭湡⁳湩汣摵湩⁧楤灳獯污漠⁦慭整楲污眠瑩楨〵洠瑥敲⁳敬摡愠⁳数⁲楤敲瑣潩景䔠杮湩敥⁲‭湩ⴠ挠慨杲⁥潣灭敬整愠汬愠⁳灳捥晩敩⁤湡⁤楤敲瑣摥䘮
牐癯摩湩⁧湡⁤慬楹杮椠潰楳楴湯挠浥湥⁴潣据敲整漠⁦灳捥晩敩⁤牧摡⁥硥汣摵湩⁧桴⁥潣瑳漠⁦散瑮牥湩⁧湡⁤桳瑵整楲杮ⴠ䄠汬眠牯灵琠汰湩桴氠癥汥㨠㨱㨳‶ㄨ䌠浥湥⁴›″潣牡敳猠湡⁤稨湯ⵥ䥉⥉搠牥癩摥映潲慮畴慲潳牵散⁳›‶牧摡摥猠潴敮愠杧敲慧整㈠‰浭渠浯湩污猠穩⁥獡椠慢敳漠⁦汦潯楲杮挠浯汰瑥⁥污獡猠数楣楦摥愠摮搠物捥整⹤ñ䴀䰦倠䍃ㄠㄺ㔮㌻琠灹⁥ⵁ‱獡椠敋扲戬畯摮湩⁧景攠杤獥漠⁦湩整汲捯楫杮琠汩獥挬灯湩⁧湡⁤桴⁥楬敫椠据畬楤杮眠瑡牥湩⁧…楬桧汴⁹潲湵敤⁤牯挠慨晭牥摥愠杮敬⁳湡⁤桴潲瑡湩⁧湩汣摵湩⁧散瑮楲杮愠摮猠畨瑴牥湩⹧挠浯汰瑥⁥污獡猠数楣楦摥愠摮搠物捥整⹤™匀䘦䘠捡潴祲洠摡⁥牰捥獡⁴敨癡⁹畤祴搠慲湩 慭桮汯⁥潣敶獲眠瑩⁨卍映慲敭愠摮爠楥普牯散敭瑮†獡瀠牥䤠⁓㈱㤵′㈨〰⤲挠浯汰瑥⁥污獡猠数楣楦摥愠摮搠物捥整⹤Ū䐀獩潰慳景戠極摬湩⁧畲扢獩⁨ 慭扬⁡ 楳業慬⁲湵敳癲捩慥汢ⱥ搠獩慭瑮敬⁤牯眠獡整洠瑡牥慩獬戠⁹敭档湡捩污洠慥獮‬湩汣摵湩⁧潬摡湩Ⱨ琠慲獮潰瑲湩Ⱨ甠汮慯楤杮琠灡牰癯摥洠湵捩灩污搠浵楰杮朠潲湵⁤牯愠⁳灡牰癯摥戠⁹湅楧敮牥椭⵮档牡敧‬敢潹摮㔠‰湩瑩慩敬摡†畯⁴楳敤琠敨䴠䑏氠湡Ɽ映牯愠汬氠慥獤椠据畬楤杮愠汬氠晩獴椠癮汯敶⁤潣灭敬整愠汬愠⁳灳捥晩敩⁤湡⁤楤敲瑣摥ꬮ楄浳湡汴湩⁧潲景湩⁧湩汣摵湩⁧楲杤獥‬楨獰‬慶汬祥⁳湡⁤畧瑴牥⁳瑥⹣‬湡⁤瑳捡楫杮琠敨洠瑡牥慩楷桴湩㔠‰敭牴獥氠慥⁤景䜠匮‮桓敥⁴潣灭敬整愠汬愠⁳灳捥晩敩⁤湡⁤楤敲瑣摥弮♍⁌潦⁲牐癯摩湩⁧湡⁤楦楸杮瀠敲潣瑡摥朠污慶楮敳⁤物湯瀠潲楦敬猠敨瑥⁳猨穩ⱥ猠慨数愠摮瀠瑩档漠⁦潣牲杵瑡潩獡愠灰潲敶⁤祢䔠杮湩敥⵲湩挭慨杲⥥〠㔮‰浭⠠‫⸰㔰┠ 潴慴潣瑡摥琠楨正敮獳眠瑩⁨楺据挠慯楴杮ㄠ〲朠慲獭瀠牥猠浱愠⁳数⁲卉›㜲ⰷ椠㐲‰灭⁡瑳敥牧摡ⱥ㔠㜭洠捩潲獮攠潰祸瀠楲敭⁲湯戠瑯⁨楳敤漠⁦桴⁥桳敥⁴湡⁤潰祬獥整⁲潴⁰潣瑡ㄠⴵ㠱洠捩潲獮‮桓敥⁴桳畯摬栠癡⁥牰瑯捥楴敶朠慵摲映汩景㈠‵業牣湯⁳業楮畭潴愠潶摩猠牣瑡档獥搠牵湩⁧牴湡灳牯慴楴湯愠摮猠潨汵⁤敢猠灵汰敩⁤湩猠湩汧⁥敬杮桴甠瑰㈱洠瑥敲漠⁲獡搠獥物摥戠⁹湅楧敮牥湩‭档牡敧‮桔⁥桳敥⁴桳污敢映硩摥甠楳杮猠汥⁦牤汩楬杮⼠敳晬琠灡楰杮猠牣睥⁳景猠穩⁥㔨㔮⁸㔵洠⥭眠瑩⁨偅䵄猠慥ⱬ挠浯汰瑥⁥灵潴愠祮瀠瑩档椠潨楲潺瑮污 敶瑲捩污漠⁲畣癲摥猠牵慦散ⱳ攠捸畬楤杮琠敨挠獯⁴景瀠牵楬獮‬慲瑦牥⁳湡⁤牴獵敳⁳湡⁤湩汣摵湩⁧畣瑴湩⁧潴猠穩⁥湡⁤桳灡⁥桷牥癥牥爠煥極敲⁤潣灭敬整愠汬愠⁳灳捥晩敩⁤湡⁤楤敲瑣摥쀮䴠䰦映牯眠物湩⁧潦⁲楬桧⁴潰湩⽴慦潰湩⽴硥慨獵⁴慦潰湩⁴‬慣汬戠汥潰湩⁴楷桴ㄠ㔮匠浱噐⁃湩畳慬整⁤剆卌甠獮敨瑡敨⁤潣灰牥挠湯畤瑣牯挠扡敬漠⁦楳敺ㄠ㔮猠浱湩汣摵湩⁧慥瑲⁨楷敲漠⁦楳敺ㄠ㔮匠浱剆卌倠䍖椠獮汵瑡摥挠灯数⁲潣摮捵潴⁲楳杮敬挠牯⁥慣汢⁥湩†畳晲捡⽥挠湯散污摥⼠噐⁃潣摮極⁴ 噐⁃慣楰杮愠⁳数⁲楳整爠煥極敲敭瑮愠⁳楤敲瑣摥漠⁦畳慴汢⁥楳敺㈠⼵㈳浭振獡湩⁧慣楰杮漠⁦畳瑩扡敬猠穩⁥湩汣摵湩⁧潰摷牥挠瑯摥†ㄨ㈮浭琠楨正 敍慴汆獵⁨䥇猠敨瑥戠硯愠摮眠楨整洠摯汵牡䤠湮牥伯瑵牥挠癯牥瀠慬整眠瑩⁨牦浡ⱥ†湩汣摵湩⁧畣瑴湩⁧档獡獥映牯挠湯畤瑩†湡⁤洠歡湩⁧潧摯琠慷汬愠摮挠楥楬杮吠歡湩⁧潤湷漠摬甠獮牥楶慣汢⁥潰湩⁴楷楲杮爠瑡⁥潴戠⁥湩汣摵摥椠畱瑯摥爠瑡⁥潣灭敬整愠汬愠⁳灳捥晩敩⁤湡⁤楤敲瑣摥‮v伀敮氠杩瑨瀠楯瑮漠⁲湯⁥慦潰湩⽴硥慨獵⁴慦潣瑮潲汬摥戠⁹湯⁥‵流獰猠楷捴⁨潣灭敬整愠汬愠⁳灳捥晩敩⁤湡⁤楤敲瑣摥⸠圠湏⁥″楰潳正瑥漠瑵氠瑥㔠䄠灭⁳湯猠浡⁥潢牡⁤潣灭敬整愠汬愠⁳灳捥晩敩⁤湡⁤楤敲瑣摥⸠帠湏⁥″楰潳正瑥漠瑵氠瑥㔠䄠灭⁳湯䤠摮灥湥敤瑮戠慯摲挠浯汰瑥⁥污獡猠数楣楦摥愠摮搠物捥整⁤‮Ę䴀䰦映牯眠物湩⁧潦⁲䄠⁃瀠楯瑮眠瑩⁨砲‴煓浭䘠䱒⁓噐⁃湩畳慬整⁤潣灰牥挠湯畤瑣牯猠湩汧⁥潣敲挠扡敬椠畳晲捡⽥敲散獳摥攠楸瑳湩⁧潣摮極⁴污湯睧瑩⁨砱㐠匠浱剆卌倠䍖椠獮汵瑡摥挠灯数⁲潣摮捵潴⁲慣汢⁥楳杮敬挠牯⁥潦⁲潬灯攠牡桴湩⁧獡爠煥極敲⁤潣灭敬整愠汬愠⁳灳捥晩敩⁤湡⁤楤敲瑣摥⸠崠♓⁆潭畤慬⁲睳瑩档猠湩汧⁥潰敬漠敮眠祡㘠䄠灭⁳‱潭畤敬挠浯汰瑥⁥污獡猠数楣楦摥愠摮搠物捥整幤♓⁆潭畤慬⁲睳瑩档猠湩汧⁥潰敬漠敮眠祡ㄠ‶流獰ㄠ洠摯汵⁥潣灭敬整愠汬愠⁳灳捥晩敩⁤湡⁤楤敲瑣摥a匀䘦椠敲汰捡浥湥⁴景映湡猠整⁰敲畧慬潴⁲㈱地‮′潭畤敬挠浯汰瑥⁥污獡猠数楣楦摥愠摮搠物捥整⁤‮V匀䘦吠汥灥潨敮猠捯敫⁴慪正删⁊ㄱ眠瑩⁨桳瑵整⁲潣灭敬整愠汬愠⁳灳捥晩敩⁤湡⁤楤敲瑣摥⸠♓⁆畳瑩扡敬猠穩⁥䥇戠硯眠瑩⁨潭畤慬⁲汰瑡⁥湡⁤潣敶⁲湩映潲瑮

氀氀愀琀椀漀渀Ⰰ 琀攀猀琀椀渀最 愀渀搀 挀漀洀洀椀猀猀椀漀渀椀渀最 漀昀 䄀搀搀爀攀猀猀愀戀氀攀 ㈀p

Please Enable Macros to View BoQ information