REPAIR AND POLISHING TO WOODEN FURNITURE ITEM OF ALL MD OFFICERS ACCN AND OTM ACCN AT AHMEDABAD CANTT

Amount

Table Writing : FD-249/275

Taking out existing unserviceable top and providing new top of size 1145x600x760mm, 18/19 mm made of prelaminted MDF board ISI marked Exterior grade and teak wood beading all round 4 mm thick shall be provided all as specified and shown on drg.

Taking out existing broken legs and M&L new legs made of 1st class seasoned teak wood as per existing pattern and polished with french polished complete all as specified and as directed by Engr-in-charge.

Taking out existing unserviceable stiffners and M&L new stiffners made of 1st class teak wood as per existing pattern and polished with french polished complete all as specified and as directed by Engr-in-charge.

Taking out unserviceable side & front of drawer and M&L new side & front drawer made of Prelaminated MDF board exterior grade as per existing pattern complete all as specified and as directed by Engr-in-charge.

Replacement of unserviceable bottom and back of drawer with new bottom and back of drawer of 6mm thick plywood commercial as per existing pattern complete all as specified and directed.

Replacement of unserviceable ply wood of back side of table writing with new 8mm ply BWR ISI marked as per existing pattern and as directed by Engr-in-charge.

Replacement of unserviceable lock of drawers and M&L new brass lock 50mm, 4 lever Make-Link,Godrej, Harrison as per drg and specified.

Replacement of unserviceable front shutter of table writing with new front shutter made of Prelaminated MDF board exterior grade, shade approved by Engr-in- charge with piano type continuos hinges as per existing size and as directed by Engr-in-charge.

Replacement of broken Knob with new chromium plated knob as per existing pattern and directed by Engr-in-charge.

Material and labour for applying two coat of french polish on all exposed surfaces of table writing including cleaning and preparing the surface including a coat of wood filler on wooden surface complete all as specified and directed.

M&L for new buffer/shoes of PVC quality complete all as specified and directed.

Table Computer : FD/E6/MAP/03 Taking out unservicable top of table Computer and M&L new top of MDF Prelaminated board exterior grade 18/19 mm thick of same size and shape as per existing pattern and shown on drg.

Taking out unservicable key board with telescopic channel of table computer and M&L new top of MDF Prelaminated board exterior grade 18/19 mm thick with teak wood beading all round 4 mm thick with french polished and 1.6 mm thick ISI telescopic channel of same size and shape as per existing pattern complete all as specified and directed.

Taking out unserviceable drawer / mouse board of table computer and M&L new drawer / mouse board of MDF prelaminated board exterior grade 18/19 mm thick with teak wood beading all round 4 mm thick with french polished and 1.6 mm thick ISI telescopic channel of same size and shape as per existing pattern complete all as specified and directed.

Taking out unserviceable sides of table computer and M&L new sides of MDF prelaminated board exterior grade with 4 mm thick teak wood beading with french polished all round of same size & shape as per existing pattern complete all as specified and directed.

Taking out unserviceable bottom board of table computer and M&L new bottom board of MDF prelaminated board exterior grade with 4 mm thick teak wood beading with french polished all round of same size & shape as per existing pattern complete all as specified and directed.

Taking out broken frame of table computer and provided to welding table computer frame of same size & shape as per existing pattern complete all as specified and directed.

SIDE BOARD : FD-241/1112 S&F of follwing parts of Side board including dismanting of old unserviceable parts without disturbing the other parts, made to shape & size all as shown on drawing, complete all as specified and directed by Engr-in-charge/GE:-

Taking out unserviceable Top of side board and M&L new top of MDF prelaminated board exterior grade with 4 mm thick teak wood beading all round of same size & shape as per existing pattern complete all as specified and directed.

Taking out unserviceable Shutters of side board and M&L new shutters made of MDF Prelaminated board, exteror grade of same size & shape with ISI marked, Hinges as per existing pattern complete all as specified and directed.

Taking out unserviceable Sides of side board and M&L new shutters made of MDF prelaminated Board exterior grade of same size and shape as per existing pattern complete all as specified and directed.

Taking out unserviceable drawers and M&L new drawers of same size & shape as per existing pattern complete all as specified and directed.

Taking out unserviceable shelves and M&L new shelves made of MDF prelaminated board exterior grade of same size and shape as per existing pattern complete all as specified and directed.

Taking out broken knob/handle from side board and M&Ld new Knob, handle (100 mm long) chromium plated of drawers & shutters as approved by Engr-in-charge complete all as specified and directed.

Taking out unserviceable back of side board and M&L new back made of MDF board Exterior grade ISI Plywood of same size and shape as per existing pattern and directed by Engr-in-charge.

Taking out unserviceable Base support of side board and M&L new base support made of 1st class teak wood teak wood of same size& shape as per existing pattern complete all as specified and directed.

Taking out of unserviceable Magnet Catchers and M&L new Megnate catchers as approved by Engr-in-charge.

M&L for applying two coats of french polish on all exposed sufraces of side board including cleaning and preparing the surface including a coat of wood filler on wooden surfaces complete all as specified and directed.

TABLE DRESSING GENTS WITH MIRROR : FD-230, FD-31(M)/ FD/E6/MAP/16 S&F of following parts of table dressing gents including dismanting of old unserviceable parts without disturbing the other parts, made to shape & size as shown on drawings, complete all as specified and directed by Engr-in-charge/GE:-

Taking out unserviceable mirror of table dressing gents and M&L new mirror 5.5 mm thick fixed along with suitable beading support and back ply 12 mm thick.

Taking out unserviceable box of table dressing gents and M&L new box of table dressing gents with back of 12 mm thick teak wood plank in one piece and top bottom, sides made of MDF prelaminated board exterior grade of same size & shape as per existing pattern.

Taking out unseviceable knob and M&L new knob as approved by Engr-in-charge.

Taking out unserviceable teak wood frame and M&L new teak wood frame of same size & shape as per existing pattern.

Taking out unserviceable ply wood of back of table dressing gents and M&L new ply wood 12 mm thick , BWR as per ISI 303 of same size & shape as per existing pattern.

Taking out unserviceable sides of cabinet and M&L new sides made of 18 mm thick MDF prelaminated board exterior grade of same size & shape as per existing pattern.

Taking out of unserviceable top/bottom sides of cabinets of table dressing gents and M&L new top / bottom sides of 18 mm thick MDF prelaminated board exterior grade of same size & shape as per existing pattern.

M&L for applying two or more coats of french polish on all exposed surface of table dressing gents including cleaning & preparing the surface including a coat of wood fitter on wooden surface.

Taking down old unserviceable hinges and M & L for new continous piano hinges to open the mirror frame in horigontal circle all as per drawing.

Taking out old unserviceable magnet catcher at top & bottom inside the cabinet and provide new magnet catcher as specified in drg and directed by Engr - in - charge.

TABLE DRESSING LADIES WITH MIRROR : FD-378/45 (M) S&F of following parts of table dressing ladies including dismantling of old unserviceable parts without disturbing the other parts, made to shape & size as shown on drawings,complete all as specified and directed by Engr-in-charge/GE:-

M&L for 5mm thick mirror shall be fixed along with suitable beading support and back ply 12mm of mirror

M&LTop shall be made of 18/19 mm thick prelaminated MDF Board ISI marked confirming to IS-14587 Grade-I,Type-II of shade as approved by Engr-in-charge/GE.

Replacement of unserviceable drawers side M&L new drawer side of 18/19 mm thick Pre-laminated MDF board exterior grade and plywood top BWR grade ISI marked all as specified and shown in drg.

M&L for Bottom shall be made of 18/19 mm thick prelaminated MDF Board ISI marked confirming to IS-14587 Grade-I,Type-II of shade as approved by Engr-in-charge/ GE.

M&L for Sides shall be made of 18/19 mm thick prelaminated MDF Board ISI marked confirming to IS-14587 Grade-I,Type-II of shade as approved by Engr-in-charge/GE.

M&L for Back of box shall be 12mm thick plywood of BWR Grade ISI Marked confirming to IS-303.

M&L for Sliding glass shutters 5.0 mm thick plain glass with all requisite arrangements and struggers in both pieces shall be provided complete all as specified and directed.

Replacement of unserviceable knob of drawers with M&L new knob all as per drg complete.

M&L for applying two or more coats of french polish on all exposed sufraces of table dressing ladies including cleaning and preparing the surface including a coat of wood filler on wooden surfaces.

TABLE PEG : FD-384 & FD-277 S&F of following parts of table peg including dismantling of old unserviceable parts without disturbing the other parts, made to shape & size as shown on drawings, complete all as specified and directed by Engr - in - charge / GE.

M&L for Top shall be made of 18/19 mm thick prelaminated MDF Board ISI marked confirming to IS-14587 Grade-I,Type-II of shade as approved by Engr-in-charge along with 6mm thick half round teak wood beading alround.

M&L for Leg shall be made of well seasoned first class teakwood complete all as specified and directed.

M&L for Short Rail shall be made of well seasoned first class teakwood complete all as specified and directed.

M&L for Long Rail shall be made of well seasoned first class teakwood complete all as specified and directed.

M&L for PVC shoe superior quality as approved by Engr-in-Chargecomplete all as specified and directed.

M&L for applying two or more coats of french polish on all exposed sufraces of Peg Table including cleaning and preparing the surface including a coat of wood filler on wooden surfaces.

Sofa set 5 Seater : FD/MAP-II/02 / FD-373/281 S & F of following parts of sofa set 5 Seater including dismantling of old unserviceable parts without disturbing the other parts, made to shape & size as shown on drawing, complete all as specified and direceted by Engr - in - charge / GE.

Taking out old u/s front leg and M&L for new leg made out of 1st class teak wood all as specified in drg and as directed by Engr-in-Charge.

Taking out old u/s rear leg and M&L for new leg made out of 1st class teak wood all as specified in drg and as directed by Engr-in-Charge.

Taking out old u/s side rail and M&L for new side rail made out of 1st class teak wood all as specified in drg and as directed by Engr-in-Charge.

Taking out old u/s Front or Back Plywood of 3 seater and M&L for new Front & Back Plywood 12 mm BWR grade ISI marked confirming to IS-303 all as specified in drg and as directed by by Engr-in-Charge.

Taking out old u/s Front or Back Plywood of single seater and M&L for new Front & Back Plywood 12 mm BWR grade ISI marked confirming to IS-303 all as specified in drg and as directed by by Engr-in-Charge.

Taking down old u/s bottom stiffener and M&L for new bottom stiffeners made out of 1st class teak wood all as specified in drg and as direceted by Engr-in -Charge.

Taking down old u/s back / bottom strip and M&L for new back bottom strip made out of 1st class teak wood all as specified in drg and as direceted by Engr-in -Charge.

Taking out old unsv Arms and M&L for new Arms made out of 1st class teak wood all as specified in drg and directed by Engr-in-charge.

Removing old /worn out rubber shoes with S & F new rubber/PVC shoe of superior quality as approved by Engr-in-Charge.

Polishing two coats to new and old surfaces of Sofa set 5 seater after repair with french polish of approved quality including preparation of all surfaces .

CUSHION OF SOFA : FD/MAP-II/02,FD-281,FD-373 Replacement of unserviceable cushion for seat/back with new cushion of sofa set 5 Seater comprising single piece seat / back each made of foam 40Dof size 22"x21"x100MM/95MM , duly covered with tapestry cloth stitched with fine standard thread and providing a chain best quality (at either of 21" side) of make YKK with two runners at both ends superior quality complete all as directed and shown on drg No.FD/MAP-II/02 Make :- Sleep Well/Feather foam/Kurloan(Gold) Note:- Rate of Tapestry cloth shall not be less than RS.450 Per RM.

BED PLYWOOD TOP : FD-246, 245,247,213 S&F of following parts of Bed ply top including dismantling of old unserviceable parts without disturbing the other parts, made to shape & size as shown on drawings,complete all as specified and directed by Engr-in-charge/GE-

Taking out old unsv plywood top from Bed Hard Plywood and S&F New Plywood top of 12 mm thick plywood BWR Grade ISI Marked confirming to IS-303 in one piece, fixed with suitable screws complete, all as specified in drg and as directed by Engr-in-Charge.

Taking out old userviceable long rail and M&L new long rail made out of 1st class teak wood all as specified in drg and as directed by Engr-in-Charge.

Taking out old unserviceable short rail and M&L new short rail made out of 1st class teak wood all as specified in drg and as directed by Engr-in-Charge.

Taking out old unserviceable legs and S&F new legs made out of 1st class teak wood all as specified in drg and as directed by Engr-in-Charge.

Taking out all broken worn out component of head board and M&L frame with 1st class teak wood including 2nd class hardwood battens between frame and Teak face ply both side BWR grade ISI Marked all as specified in drg and as directed by Engr-in-Charge.

All as per ser No 8.05 here-in-above but Foot Board.

Taking out old broken stiffener connecting of legs with and M&L new one made out 2nd class hard wood all as specified in drg and as directed by Engr-in-Charge.

Taking out old broken clamp and S &F MS clamp made out mild steel flat iron size 35 mm x 5 mm x80mm including 2 coats of synthetic enemel paint over a coat of redoxide primer complete all as specified and directed.

M & L for scrapping the wooden surface of bed after repairing to smooth and polishing the same with high class french polish glossy finish .

Bin linen multipurpose : FD/E6/MAP/09 S&F of following parts of Bin linen multipupose including dismantling of old unserviceable parts without disturbing the other parts, made to shape & size all as shown on drawing, complete all as specified and directed by Eng-in-charge/GE.

M&L for Top made of 18/19 mm thick prelaminated MDF Board ISI marked confirming to IS-14587 Grade-I,Type-II of shade as approved by Engr-in-charge.

M&L for Shutters made of 18/19 mm thick prelaminated MDF Board ISI marked confirming to IS-14587 Grade-I,Type-II of shade as approved by Engr-in-charge.

M&L for Sides made of 18/19 mm thick prelaminated MDF Board exterior grade ISI marked shade approved by Engr-in-charge.

Taking out old of unserviceable drawers side and M&L new Pre-laminated MDF board exterior grade and plywood top BWR grade ISI marked all as specified and shown in drg.

M&L Chromium Plated handles(Approved by GE) of 100mm long provided for shutters/drawers.

M&L for Shelve for Box made out of 18/19 mm thick prelaminated MDF Board (Make: Greenlam/Century) ISI marked confirming to IS-14587 Grade-I,Type-II of shade as approved by Engr-in-charge.

M&L for Back of 6mm Ply of BWR Grade ISI Marked confirming to IS-303.

M&L for Base support made of 1st class teak wood provided for Bin linen multipurpose.

M&L for applying two coats of french polish on all exposed sufraces of side board including cleaning and preaparing the surface including a coat of wood filler on wooden surfaces.

TV Trolly :FD/E6/MAP/04(R) Removing following unserviceable items of TV Trolly and S&F with new items all as per drawing specified & directed.

S & F TV Trolly Top made of 18 mm thick prelamnated MDF board Exterior grade with edge moulded all round (Circular cutout for wire manager shall also be provided) all as per drawing.

S & F TV Trolly Sides made of 18 mm thick prelamnated MDF board Exterior grade with edge moulded all round all as per drawing.

S & F TV Trolly Bottom made of 18 mm thick prelamnated MDF board Exterior grade with edge moulded all round all as per drawing.

S & F TV Trolly Shelf made of 18 mm thick prelamnated MDF board Exterior grade with edge moulded all round all as per drawing.

S & F in replacement 5.5mm thick Glass shutter (Including Magnetic Catcher and necessary stainless steel fitting) all as per drawing.

M&L for 50mm Dia heavy duty revolving nylon wheel provided to move freely all as per drawing.

Table dressing ladies including stool & cushion X : FD/MAP-II/07 S&F of following parts of Table dressing ladies including stool & cushion including dismanting of old unserviceable parts without disturbing the other parts, made to shape & size as shown on drawings, complete all as specified and directed by GE:-

Taking down broken 5.5mm thick Mirror and M&L for New Mirror all as specified in drg and all as directed by Engr-in-Charge.

Taking down old u/s Frame and M&L for New Frame made out of 18/19mm Particle MDF board with with covered by decorative moulded and supported on 50x28mm TW frame alround all as specified in drg and as directed by Engr-in-Charge.

Taking down old u/s back and M&L for back made out of 12 mmthick BWR grade ply as per IS-303 all as specified in drg and as directed by Engr-in-Charge.

Taking down old u/s Shelves and M&L for New shelves made out of 12mm Pre-laminated MDF board all as specified in drg and as directed by Engr-in-Charge.

Taking down old u/s Hinges and M&L for New continous piano Hinges to open the mirror frame in horizontal circle all as specified in drg and as directed by Engr-in-Charge.

Taking down old u/s magnet catcher at top & bottom, inside the cabinet to catch mirror frame all as specified in drg and as directed by Engr-in-Charge.

Taking down u/s shutter and M&L for new shutter made out of 18/19mm prelaminated MDF board as per existing patter.

Taking down U/S drawers and M&L for new drawers made out of MDF prelaminaded board exterior grade with telescopic channel as per existing pattern.

Taking down U/S top of cabinet and M&L for new cabinet made of out of MDF prelaminated board exterior grade as per existing pattern.

Polishing two coats to new and old surfaces of table Dressing ladies after repair with french polish of approved quality including preparation of all surfaces .

Repairs to Chair Dining Cushioned : FD/E-6/MAP/10(R)

Removing broken front leg & Supply and Fix new front leg as per existing pattern of First class hard wood teak and polished with French polish complete all as specified and as directedEngr - in Charge .

Removing broken rear leg & Supply and Fix new rear leg as per existing pattern of first class hard wood teak and polished with French polish complete all as specified and as directed Engr - in Charge .

Removing broken front rail/ side rail & Supply and Fix new front rail/side rail as per existing pattern of first class hard wood teak and polished with French polish, duly drilled for caning complete all as specified and as directed Engr - in Charge .

Removing broken rear rail & Supply and Fix new rear rail as per existing pattern of first class hard wood teak and polished with French polish, complete all as specified and as directed Engr - in Charge .

Removing broken back strip & Supply and Fix new back strip as per existing pattern of first class hard wood teak and polished with French polish, complete all as specified and as directed Engr - in Charge .

Removing broken brackets and Supply and fix triangular bracket as per existing pattern duly chamfered and french polished on front corners of the chair dining as per existing pattern complete all as specified and as directedEngr - in Charge .

Removing broken upper rail of back & Supply and Fix new upper rail of back as per existing pattern of first class hard wood teak and polished with French polish, complete all as specified and as directed Engr - in Charge .

Removing unsv cushion and Supply and Fix new cushion with 75 mm thick , 40 density foam covered with approved tapestry cloth on seat of 12 mm ply thick BWR,ISI not less than 350/- per meter as per existing all as specified and as directed Engr - in Charge .

Removing broken stiffener & Supply and Fix new stiffener as per existing pattern of First class hard wood and polished with French polish complete all as specified and as directedEngr - in Charge .

M&L pvc shoes superior quality as approved and directed Engr - in Charge .

M&L for applying two coats of french polish on all exposed surfaces of chair dining including cleaning and preparing the surface including a coat of wood filler on wooden surface as directed Engr - in Charge .

Table Bed Side : FD/E6/MAP/15(R)

Removing unserviceable top/Bottom & Supply and Fix new top of pre laminated MDF board 18 mm thick, exterior grade with 4 mm thick Teak wood beading duly French polished complete all as per existing pattern as specified and directed Engr - in Charge .

Removing unserviceable any sides & Supply and Fix new sides of Pre laminated MDF board , 18 mm thick, exterior grade with 4 mm thick Teak wood beading duly French polished complete all as per existing complete all as specified and as directed Engr - in Charge .

Removing unserviceable back & Supply and Fix new back made out of 6 mm thick ply wood BWR Grade of all as per existing complete all as specified and as directed Engr - in Charge .

Removing unserviceable body drawer & Supply and Fix new body drawer made out of 18 mm thick Pre-laminated MDF board exterior grade finishing with PVC edging 1.5 mm thick of all as per existing complete all as specified and as directed Engr - in Charge .

Removing unserviceable handle & Supply and Fix new handle of 100 mm long chrome plated non ferrous metal alloy of all as per existing complete all as specified and as directed Engr - in Charge .

Removing unserviceable MS square pipe & Supply and Fix new MS square pipe of pre-treated with epoxy polyster powder coating all as per existing pattern complete all as specified and as directed Engr - in Charge .

M&L pvc shoes superior quality as approved and directed Engr - in Charge .

Table dining 6 persons, 1500 mm X 900 mm X 760 mm: FD - 239 & FD - 273

Removing unserviceable table top & Supply and Fix new table top, of size 1500mmx 900mm of pre laminated MDF board with one side decorative laminated and another side plain white, 18 mm thick, exterior grade with 4 mm thick Teak wood beading duly French polished all as per existing pattern complete all as specified and as directed .

Removing unserviceable leg & Supply and Fix new leg of size 60mm x 60mm x 750mm made of second class hard wood as per existing pattern duly french polished complete all as specified and as directed .

Removing unserviceable long side rail of table & Supply and Fix new long side rail,of size 100mmx25mmx1500mm as per existing pattern of Second class hard wood duly french polished complete all as specified and as directed .

Removing broken corner bracket & Supply and Fix new corner bracket of triangular shape of size 100x100x25mm made of Second class hard wood duly french polished complete all as specified and as directed .

Material and Labour for applying two coats french polish on all exposed surfaces of table dining 6 persons, 1500 mm X 900 mm X 760 mm: including cleaning and preparing the surface including a coat of wood filler on wooden surface as directed Engr - in Charge .

Table centre : FD-274, 235

Removing broken leg and S & F new leg made out of II class hardwood of size 380mm x 60mm x 30mm duly french polished complete all as specified and as directed .

Removing broken long rail and S & F new long rail made out of II class hardwood of size 790mm x 50mm x 20mm duly french polished complete all as specified and as directed .

Removing broken / torned out top and S & F new Top of Table centre made out of 18 mm thick pre laminated MDF board one side teak face of of size 900mm X 450 mm and providing 5 mm thick teak wood beading around the top all as specified and as directed .

Material and Labour for applying two coats french polish on all exposed surfaces of table center including cleaning and preparing the surface including a coat of wood filler on wooden surface as directed Engr - in Charge .

Navkar Enterprises