Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹9.3 LAccepted-Finance VILLAGE CHAMYANA P O KAMLA NAGER BHATTA KUFER DISTT SHIMLA | SHIMLA | HIMACHAL PRADESH | 171001 | L1 | Accepted-Finance Responsive | |
| 2 | L2₹10.2 L+₹93,967.72 (10.1%)Rejected-Finance R O VILL RAMNAGAR P O PANCHRUKHI TEHSIL PALAMPUR DISTT KANGRA HP | L2 | Rejected-Finance Rejected due to higher rates bidder L2 | |
| 3 | L3₹10.7 L+₹1.4 L (15.0%)Rejected-Finance HIMACHAL PRADESH HP | CHAMBA | HIMACHAL PRADESH | 176315 | L3 | Rejected-Finance Rejected due to higher rates bidder L3 |
Tender Value
₹6.0 L
EMD Value
₹12,000
Closing Date
7 Oct 2021, 5:00 pmClosed
Executive Engineer
Executive Engineer HP.PWD Division Jaisinghpur
C/O side drain at RD 0/295 to 0/615, CD at RD 0/395, WBM-II, CC pavement and tarring work in Km 0/00 to 0/615 (MMGSY)
2021_PWD_52788_1
C/O Jeepable road from main road to Nirmal Singh h
Open Tender
Civil Works - Roads
Item Rate
60 days
Jaisinghpur
Please refer Tender documents.
14 documents required · 14 mandatory
₹350
₹12,000
23 Oct 2021
30 Sept 2021
8 Oct 2021
30 Sept 2021
7 Oct 2021
30 Sept 2021
Amount
Earth work in excavation for all type of road structure such as retaining walls, breast walls, culverts, drains and parapets etcetera in all type of classification of soil, comprising of ordinary soil, ordinary rock , hard rock chiseling / wedging out rocks (where blasting is prohibited) as per drawings and MORD technical specification clause 305.1 and as per the directions of the Engineer-in-Charge including setting out, construction of shoring and bracing, removal of stumps and other deleterious materials and disposal of materials upto any lead and upto any lift including dressing of sides and bottom and back filling in trenches with excavated suitable / approved materials to the original surface in layers not exceeding 150mm one hundred fifty millimeters) compacted thickness including shoring and strutting and pumping and bailing out water (surface and sub soil water) upto any depth and any quantum of water including cleaning of slush which may arise out during dewatering as per directions of Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.
Providing and laying mechanically mixed and vibrated plain cement concrete in open foundation for all type of structure complete using plain cement concrete grade M-10 ( M-ten) nominal mix 1:3:6 (one cement is to three sand is to six crushed stone aggregate 40 mm (forty millimetre) nominal size on ground in or under water including curing complete including pumping or bailing out water , dewatering removal of slush as required at site which may arrise at the time of laying concrete complete for all heights/ depths including the cost of form work in toe wall etctera as per drawings and M.O.R.D. technical specification section/ clause 800,900 & 1200 and as per the directions of Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals and to the entire satisfaction of the Engineer-in-Charge .The rate is including octroi, royality, GST, or other taxes imposed by the government.
Providing and laying mechanically mixed and vibrated concrete for plain/ cement concrete in sub structure for all type of structure complete using plain cement concrete grade M-15 ( M fifteen) design mix with cement contents not less than 275 kg (two hundred seventy five kilograme) per cubic metre in or under water including curing complete including pumping or bailing out water , dewatering removal of slush as required at site which may arrise at the time of laying under water complete for all heights/ depths including the cost of form work in abutments as per drawings and M.O.R.D. technical specification section 800, 900 and 1200, and as per the direction of Engineer-in-Charge including carriage of material within all leads , lifts and other incidentals .The rate is including octroi, royality, GST, toll tax, or other taxes imposed by the government.
Providing and laying mechanically mixed and vibrated reinforced cement concrete in super structure as per drawing and M.O.R.D.. technical specification section 800, 900 and 1400 using R.C.C. grade M-25 ( twenty five) design mix with cement concrete not les than 400 kg (four hundred kilograme) per cubic metre with 20mm (twenty millimetre ) nominal size graded crushed stone aggregate and curing complete including cost of form work but excluding the cost of reinforcement for reinforced concrete work in deck slab and to the entire satisfaction and as per the direction of Engineer-in-Charge including carriage of material within all leads , lifts and other incidentals .The rate is including octroi, royality, GST, toll tax or other taxes imposed by the government.
Supplying fitting and placing HYSD bar reinforcement in super structures in slab complete as per drawings and MORTH technical specifications clause 1600 and 2300, including cutting bending, binding and placing in position complete in all respect including the cost of binding wire upto all heights / depths or as per the direction and entire satisfaction of Engineer-in-Charge, including carriage of materials within all leads lifts and other incidental. The rate is including octroi, royality, GST, toll tax, or other taxes imposed by the government.
Providing laying spreading and compacting by manual means of stone aggregate of size 63mm to 45mm (sixty three millimetre to forty five millimetre) Grading-II to water bound Macadam specification including spreading in uniform thickness using template, hand packing, rolling with three wheel 80-100 (eighty to hundred ) K.N. static roller in stages to proper grade and camber, applying and brooming, stone screening type-B of size 11.2mm (eleven decimal point two millimetre) nominal size at the rate of 0.20 cum (zero point two zero cubic metre) per ten square metre and binding material at the rate of 0.06 (zero decimal zero six) cubic metre per ten square metre to fill up the interstices of coarse aggregate, watering and compacting to the required densityas per M.O.R.D. technical specifications clause 405 and as per the directions of Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals and to the entire satisfaction of the Engineer-in-Charge .The rate is including octroi, royality, GST, toll tax, or other taxes imposed by the government.
Construction of un-reinforced, plain cement concrete pavement thickness as per design and laid over a prepared sub base with 43(forty three) grade cement or any type as per clause 1501 M-30 (M- thirty) grade, design mix cement concrete, coarse and fine aggregates conforming to IS:383(three hundred eighty three), maximum size of coarse aggregate not exceeding 25mm(twenty five millimetre ) mixed in a concrete mixer of not less than 0.2 (zero point two) cubic meter capacity and appropriate weight batcher using approved mix design, laid in approved fixed side form work ( steel channel), laying and fixing of 125(one hundred twenty five) micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing, spreading the concrete with shovels, rakes,compacted using needle, screed and plate vibrators and finished in continuous opreation including expansion, construction joints, and admixtures as approved, curing of concrete slabs for 14 days (Fourteen) using curing compound (where specified) and water, finishing to line and grade as per drawing and M.O.R.D. technical specification section 1500 as per directions of Engineer - in- Charge including hauling /carriage of materials to various location through all modes of transportation with in all leads, lifts and other incidental .The rate is including octroi, royality, Malkana, toll tax GST or other taxes imposed by the Government.
Providing and applying primer coat with BITUMEN emulsion (SS-1) on the prepared surface of granular base including cleaning of road surface with hydraulic brooms and spraying primer @ 0.85 Kg. per Sqm. ( zero point eight five kilogram) per square metre using mechanical means as per M.O.R.D. technical specifications clause 502and as per the directions of Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals and to the entire satisfaction of the Engineer-in-Charge .The rate is including octroi, royality, GST, toll tax, or other taxes imposed by the government.
Providing and applying tack coat with Bitumen emulsion (RS-I) using emulsion pressure distributor at the rate of 0.275 kg. (zero point two seven five kilogram per Square metre on the prepared granular surface treated with primer and cleaned with hydraulic broom as per M.O.R.D. technical specifications clause 503 and as per the directions of Engineer-in-Charge including carriage of material within all leads , lifts and other incidentals and to the entire satisfaction of the Engineer-in-Charge .The rate is including octroi, royality, GST, toll tax, or other taxes imposed by the government.
Providing, laying and rolling of open-graded premix carpet of 20 mm (twenty milimetre) compacted thickness composed of 13.2 mm (thirteen decimal two milimetre) to 5.6 mm (five decimal six millimetre) aggregates at the rate of 0.27 Cum. ( zero point two seven cubic metre) mixed with bitumen viscosity grade-ten (V.G-10 ) at the rate 14.60 Kg. ( Fourteen point six zero kilogram) per ten Square metres of road surface to the required line, grade and level to serve as wearing course on a previously prepared base, including mixing and heating binder and aggregate in Hot mix Plant 30/40 ( Thirty / Forty) Tonne per hour capacity, transporting mixed material with tipper and laying with paver finisher to the required grade and camber and rolling with a three wheel 80-100 (Eighty - Hundred) KN static road roller,capacity finished to required level and grades to be followed by seal coat as per MORD Technical Specification section 500 as per the entire satisfaction and direction of the Engineer-in-Charge excluding the cost of tack coat and seal coat including carriage of material within all leads, lifts and other incidentals .The rate is including octroi, royality, GST, toll tax, or other taxes imposed by the government.
Providing and laying seal coat for sealing the voids in a bituminous surface laid to specified level grade and cross fall using type-B premixed with 6.80 kg (Six point eight zero kilogram) pentration grade bitument VG-10 (Viscosity grade- Ten) with 0.06 (Zero point Zero six) Cubic metre of fine aggregate per 10sqm (ten square meter) of road surface heated in mini hot mix plant and laying manually of mixed material and rolling with power road roller 8 - 10 tonne (eight to ten) tonne capacity including carriage of material / machinery and equipement required to execute work to the site of work complete in all respect within all leads , lifts aas per entire saticfication and direction of Engineer -In-Charge as per MORD technical specification section 500.The rate is including octroi, royality, GST, toll tax, or other taxes imposed by the government.
Sunil Walia
arun kumar
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .