Construction of Judicial Complex and Residences at Kharkhoda Distt. Sonipat (Pdg. Electric Sub Station only)

Amount

HSR 6.6. Earth work in excavation in foundations, trenches, etc in all kinds of soil not exceeding 2.0 Mt depth including dressing of bottom and sides of trenches stacking the excavated soil clear from the edge of excavation and subsequent filling around masonry in 15 Cm layers with compaction, including disposal of all supplies soils as directed with in a lead of 30 mts

HSR 10.26 Cement concrete 1: 8: 16 with brick ballast 40 mm nominal size in foundation and plinth

HSR 10.41 Cement concrete 1:2:4 with stone aggregate 20 mm nominal size foundation and plinth

HSR 11.2 First class brick work laid in cement sand mortar 1:6 in foundation and plinth

HSR 11.100 Brick edging 6.83 cm wide 11.43 cm deep to plinth protection with 2st class brick including grouting with cement sand mortar 1:4

HSR 15.6 12mm thick cement plaster 1:5

HSR 31.12 (c) Supply and erection of moulded case circuit breakers on wall or on existing pedestal including bonding to earth and necessary connections. 15 amp.to 60 amp. 415 V ,10 KA 3-phase.

100 amp.to 220 amp.415 V,10 KA 3-phase. 31.12 c (ii)

300 amp. to 400 amp. 415 V , 35 KA 3-phase.31.12 c (iv)

Supply and erection of pipe for wiring purposes including bends inspection boxes etc. where necessary and painting as required. Galvanised iron pipe 65 mm dia on flushed. 31.21 (xiv)

Supply and erection of PVC pipe of 6 kg. pressure laid 1 metre below ground level complete including digging refilling of the trench with jointing etc. 31.21(xxx) PVC pipe 80 mm dia.

HSR 31.22(i) Earthing with GI earth pipe 4.5 m long and 40 mm dia with masonry enclosure on the top etc. as required .

31.22(ii) Extra for using salt and charcoal / coke for pipe earth electrode as required.

31.22(iv) Earthing with tinned copper earth plate 600 mm x 600 mm x 3 mm thick including accessories and providing masonry enclosures with cover plate having locking arrangement and watering pipe etc. ( but without charcoal or coke and salt ) comlete as equired.

31.22(v) Extra for charcoal or coke and salt for G.I. Plate or copper plate earth electrode.

31.22(xii) Pdg. and laying earth connections from earth electrode with 4.00 mm dia G.I. wire in 15 mm dia G.I. pipe from earth electrode as required .

31.22(x) Pdg. and fixing 25 mm x 5 mm copper strip in 40 mm dia G.I. pipe from earth electrode as required .

31.22(xiv) Pdg. and fixing 25 mm x 5 mm copper strip on surface or in recess for connections etc. as required with all labour and material.

HSR 31.25 Supply and erection of under ground cable 1 metre below ground level covered with sand and bricks including necessary connections, digging and refiling of trenches. 240 Sq. mm 3.5 Core Cable . 31.25 (xxxiii) Ard.

400 Sq. mm 3.5 Core Cable .31.25 (xxxv) Ard.

HSR 31.26 Supply and erection of under ground cable ,loose in existing pipe or trenches complete with necessary connections . 6 Sq. mm 2 Core Cable . 31.26 (iii) Ard.

240 Sq. mm 3.5 Core Cable .31.26 (xxxiii) Ard.

400 Sq. mm 3.5 Core Cable .31.26 (xxxv) Ard.

25 Sq. mm 4 Core Cable . 31.26 (xIi) Ard.

HSR 31.28 Supply and erection of suitable compression type brass cable glands for underground Cable. 25 Sqmm to 50 Sqmm Cable 2 to 4 Core.

240 Sqmm Cable 3 to 3.5 Core .

300 Sq mm to 400 Sqmm Cable 3 to 3.5 Core .

HSR 31.30 (IV) Supply and erection of weather proof M.S.Box of size 20 cm x 15 cm x 10 cm. covered with 3.00 mm thick M.S.sheet hinged cover, locking arrangemrnt , housed in wall , including the cost of 1 no. 16 amp. 415 volts kit-kat and 2 nos. 63 amp. 415 volts neutral links fixed on hard wood board in the M.S.Box including painting and necessary connections .

Supply and erection of prestressed cement concrete pole as per IS : 1678-1960. 9 metres long 105 mm x 115 mm at top and 105 mm x 315 mm at bottom with working load of 200 Kg. burried 1.80 m in ground. 31.30 (VI) (ii)

Supply and erection of caution notice plate in three languages. 31.35 (iii)

Supply and erection of shock restoration chart in glass frame 31.35 (iv)

HSR 31.63 Supply installation testing and commissioning of wall / free standing floor mounting dust & vermin proof compartmentalized cubical panel made out of 2mm thick CRCA sheet, required hardware, 3mm thick bakelite sheet provided all along the bus bar and cable alley separating switches compartment and supporting suitable channel, dully painted by 2 coat of zinc / Red oxide primer followed by 2 coats of powder coating in grey or required shade after rinsing. The panel having PU / Neoprene rubber gasket of not less than 3mm thickness, separate detachable gland plate MS base channel, hinged door with inter locking arrangement for equipment / switch gear. Transparent acrylic sheet shall be provided in front of bus bar compartment to prevent direct access to bus bar bakelite sheet 3mm thick for separately cable alley to BBC from switch chember. Extended solid copper bars up to cable alleys shall be provided for outgoing connection which shall be paid as extra items. Side walls and cable alley compartments shall be having bolted type doors with detachable extension type structure. The panel will be complete with control wiring (copper) and fuse protection. (only outer area on all sides shall be measured).

HSR 31.64 Supplying and fixing of Copper bus bar duly tinned by means of SMC/DMC type insulator high tensile nuts and bolts spring washers fixing to same in existing panel including bending , cutting in required shape and size and insulation with colour coding heat shrinkable PVC insulation Complete in all respect.

HSR 31.66 Supply & fixing of rotary handle for on / off operation of existing MCCB in the LT panel including fixing the same in position with all labour and material required to complete the job in all respect. up to 125A MCCB

Above 125A MCCB

HSR 31.71 S/E of XLPE (E)11 KV HT aluminum conductor armoured cable ISI mark laid in existing pipe /trenches/surface with all labour and material required to complete the job in all respect upto the entire satisfaction of the Engineer-in-charge of the work. 50 sqmm 3 core XLPE Cable

HSR 31.72 Supply and erection of heat shrinkage type end termination jointing kit indoor type of suitable to accommodate 3 core 11 KV XLPE aluminum cable/ ABC cable complete with all the kit contents including earth continuing connection along with 3 nos. crimpling type aluminum lugs of suitable capacity including making joining etc complete in all respect. Suitable for 16 to 50 sqmm 3 core XLPE Cable

HSR 31.73 Supply and erection of heat shrinkage type end termination jointing kit outdoor type of suitable to accommodate 3 core 11 KV XLPE aluminum cable/ ABC cable complete with all the kit contents including earth continuing connection along with 3 nos. crimpling type aluminum lugs of suitable capacity including making joining etc complete in all respect. Suitable for 16 to 50 sqmm 3 core XLPE Cable

NS items Supply and erection of LED Flood light Luminaires 120W of Makes: Surya SLE FL 120W IP 66 LUMOS / Crompton LFLN-120-CDL/60 / Bajaj BJFL 120W LED with lense with high power LED street light in aluminium PDC housing, toughened glass cover with IP 66 protection and accessories required to complete the job in all respect including erection and fixing including connection and other petty material for the same upto the entire satisfaction of Engineer in Charge of the work.

Supply and erection of ACSR conductor (ISI Marked) with accessories including stringing and sagging of conductor of various sizes as well as jointing and binding with insulator at support complete in all respect up to entire satisfaction of Engineer-in-charge of the work. ACSR Cond. 50 Sqmm

ACSR Cond. 20 Sqmm

Supply, stringing and sagging of GSL wire 8 SWG complete in all respect with erection of the same upto the entire satisfaction of the Engineer in Charge of work

Supply and erection of MS channel 100x50x6mm including cutting bending to the required shape drilling hole carriage Painting loading unloading complete in all respect upto the entire satisfaction of Engineer-in-charge.

Supply and erection of MS angle 50x50x6mm including cutting bending to the required shape drilling hole carriage Painting loading unloading complete in all respect upto the entire satisfaction of Engineer-in-charge.

Supply and erection of MS flat 50x6mm including cutting bending to the required shape drilling hole carriage Painting loading unloading complete in all respect upto the entire satisfaction of Engineer-in-charge.

Providing and fixing of Nut & Bolt of size as per ISI specification of Engineer-in-charge.

Supply and erection of Shackle insulator as per State Electricity Nigam specification upto the entire satisfaction of Engineer-in-Charge.

Supply & erection of 11KV GI pin insulator Rashtriya / Jayshree / BHEL make with pin with all labour and material required to the complete the job included the fixing the same on existing channels up to entire satisfaction of the Engineer-in-Charge of the works.

Supply of MS D-strip type-I made out of MS flat of size 40x6mm suitable for LT insulator 90x75mm with latest amendments complete in all respect with erection of the same upto the entire satisfaction of the Engineer in Charge of work excluding cost of Nuts & bolts.

Supply & erection of 11KV gang operated switch Rashtriya / Jayshree / BHEL make conforming to IS with latest amendment including suitable size of copper blade erection of same on the existing 'H'pole with the help of 3 Nos. channels of size 75mmx40mmx6mm, 1.8M long fixed with suitable size of MS clamp, nuts and bolts including cost of 6 Nos. 11KV insulator with GI pin, RD fuses and painting with 2 coat of approved paint and one coat of red oxide material required to complete the job in all respect up to entire satisfaction of the Engineer-in-Charge of the works.

Supply Erection Testing & Commissioning of 11kV indoor HT metering panel indoor / outdoor complete with C.Ts P.Ts Cubical .as per requirement / approved by UHBVNL consisting of the following. - Cubical panel free standing floor mounting type made out of sheet steel 16 SWG CRCA sheet with channel iron base frame spray painted with strong synthetic light grey enamel paint as per size and design approved by the UHBVNL. - 3 Nos. 11KV CTS of rating as approved by UHBVNL for indoor installation of approved make of UHBVNL. - 1 Nos. 11KVPTS 11000/10 VA burden 0.5 accuracy oil filled suitable for indoor installation of approved make of UHBVNL. The cubical panel will be completed in all respect including inter connection, internal wiring with PVC copper cable, its testing and approval of all item by UHBVNL cost of all testing/ approval charges or all items of UHBVNL with a guarantee of one year from the date of commissioning. including cost of all labour and material required to complete the job in all respect upto the entire satisfaction of the engineer in charge of the work

Supply & Erection of Digital Electronic Meter 3 phase 4 wires 0.5 accuracy for recording reading in KWH of make and rating approved by UHBVNL with push button display operating system for different kind of readings.F57 including cost of all labour and material required to complete the job in all respect upto the entire satisfaction of the engineer in charge of the work.

Supply & Erection of bucket stand suitable for 6 Nos. fire buckets,(but without bucket) including the cost of welding and painting of complete stand with one coat of red oxide and 2 coats of approved paint of red colour with all labour and material required to complete the job in all respect up to the entire Satisfaction engineer in charge of the work. Stand made out of GI pipe 32mm dia.

Supply & Erection of rubber mat of size 1Mx2 M X 12mm thick suitable for 11 KV ISI marked complete in all respect upto the entire satisfaction of the engineer In-charge of the work. Make & Model as approved by Chief Electrical Inspecter Haryana.

Supply & erection of fire extinguisher ISI marked Co 2 type 4.5 Kg. Capacity as Per ISI 7285 duly erected on wall with hook including the cost of hook, screw etc. with all the labour and material required to complete the job in all respect up to the entire satisfaction of the Engineer In charge of the work. Make: Ajay, Zenith, Minimax.

Supply & Erection of fire buckets of 9 ltr. capacity made out of 24guage G.l sheet and duly painted with one coat of red oxide and 2 coats of approved paint in red colour and written with the fire' as per fire protection necessar sand filling in the bucket hung the bucket on stand with all labour and material required to complete the job all respect up to entire \satisfaction of the Engineer m charge of the work

Providing and fixing of wire mesh jali around the transformer of size 4’ x 8’ made out of 75x25x3.25mm jali fixed with angle iron frame made out of M.S Angle 50 x 50 x 6 mm support of M.S flat 50 x 6mm and fixed in C.C block 1:2:4 including cutting, welding etc. as per drawing complete in all respect upto the entire satisfaction of the Engineer in charge

Supply & erection of lighting arrestor model ALPRO / Alastom/ LEMCO make suitable for 11KV 3 Phase 50 HZ ground neutral system comprising of spare gape type queen gap type in series with non linger resistar element house in Horizontally scale poreclam bushing with line and ground terminal along with mounting clamps conforming to ISS 3070 (Part-I) of 1985 with latest amendment with all labour and material required to the complete in all respect up to entire satisfaction of the Engineer-in-Charge of the works.

Supply of Disc insulator Rashtriya / Jayshree / BHEL make with Disc fitting T&C type complete in all respect with erection of the same upto the entire satisfaction of the Engineer in Charge of work

Supply & Erection of cubical type dust and Vermin proof LT automatic power factor control panel 60KVAR capacity. suitable for automatic operation and control of power factor within the set limits free standing floor / wall mounting made out of 16 gauge M.S. sheet duly powder coated suitable for operation of 3 phase 4 wires 50 cycles per second 400/440V.A.C. supply equipped with the following. - 1 No. automatic power factor control relay. Incomer MCCB (35KA) = 100amp. with back up protection of HRC Connection from incomer MCCB to bus bar by means of copper wires of suitable size of requisite capacity insulated with PVC. 4 No. 10 KVAR & 4nos 3 phase 5 KVAR capacitor . (Total 60 / KVR) Installed and duly wired inside panel with axial flow fan controlled through thermostat. The panel will be complete with all internal wiring with PVC copper wire, inter connection etc. complete in all respect with all labour and material up to the entire satisfaction of the Engineer-in-charge of the work. (Make as per approved list)

Supply and erections of V-shape X-arm on PCC poles as per state electricity Nigam design and requirement it should be made out of MS channel size 75 x 40 x 6mm complete in all respect .

Providing & fixing of stay set complete with stay wire and egg insulator as per specification upto the entire satisfaction of Engineer-in-Charge for HT/LT line.

Supply and erection of guards made of G.I. wire 8 SWG with guard real for HT/LT line complete in all respect upto the entire satisfaction of Engineer-in-Charge.

Supply and erection of fuse unit L.T. side 400 amp. on LT pole complete with wooden board cleats, aluminum strips M.S. clamp & M.S. Nuts& Bolts including all petty, material required upto the entire satisfaction of Engineer-in-Charge.

S/E of 11 KV danger plate 8” x 6” duly painted with enamel paint

Supply and fixing of L.T. phase separator 4 lines of PVC complete in all respect upto the entire satisfaction of Engineer-in-Charge.

Supply, Erection, testing and commissioning of Pole Mounted Transformer- 200 KVA 11/0.433 K. V.3 Phase-50 cycles copper wound outdoor type as per latest ISI specification up to the entire satisfaction of the Engineer-in-charge of work as detailed as under: No. load voltage ratio 11/0.433 K V. No. of Phase = 3 Frequency cycles = 50HZ Type- double wound core type copper wound Cooling = ONAN Duty = outdoor Vector group/ISS-DYN 11/IS- 2026 Tapping Range ± 5% in steps of 2.5% Temperature rise over ambient 50° C Attitude= upto 1000metres above N.S.L. Fitting/Accessories Provided. Drain cum filter valve. 4Nos. plain roller uni directional Rating & diagram plate Two earthing terminals Tap changer off load Externally hand operated Oil Conservator with fitting Knob & Cap Plain oil level with Minimum level marking. Lifting arrangement Therma meter pocket with one dial type thermometer. Inspection of housing with covers Silica jel breather First filling of oil. Explosion vent. Air release plug. Termination:- HV 3 pole bushing suitable for 1 No. 3 core up to 120 sqmm XLPE cable including the cost of suitable thimbles. LV : 4 Pole bushings including neutral suitable for 2 No. 240 sq.mm 3.5 core poly vinyl chloride cable having extended copper bars of requisite capacity duly tinned from L. T. bushing for making connection with cable including the cost of suitable thimbles, including erection of same on existing masonary plateform complete up to entire satisfaction of the Engineer-in-Charge of the works. (Make as per approved list)

Chopra Electric Company

PS ELECTRIC