Comprehensive maintenance of MH Dehradun under AGE B/R-I of GE Dehradun

Amount

Supply and fix aluminium anodised door with frame and shutter, and glazing 5.0 mm thick plain glass and 12 mm thick prelaminated particle board exerior grade in bottom panel, rubber gasket, aluminium glazing clips, mortice lock, aluminium stopper cleat, iron mongary including taking down old door complete all as specified and directed. section of aluminium door shall be of following sizes: - Top;- 85x44.5x1.20 mm thick fixed with rawal plug width;- 85x44.5x1.20 mm thick Bottom;- 100x44.5x1.20 mm thick Style;- 85x44.5x1.20 mm thick Glazing beading;- 0.70 mm thick Aluminium handle 'D' type ;- 150mm Aluminium tower bold 9.9 mm dia shoot 200 mm long Mortice lock stainless steel - 100 mm 4 lever Aluminium stopper cleat aluminium hinges 100 mm long Note;- (i) Making good of wall surface with matching to existing surface complete all as specified ad directed (ii) PCC shall be measured and paid seperatelly Make: (i) Anodised aluminum section : Jindal / Hindalko / Indalco. (ii) Particle board: Navipan / Puratuff / Kitlam (iii) Glass: Saint gobain / Modi guard / Tata Note- Work will be carried out up to 5th storey

Supply and fix aluminium window with shutter including rubbre beeding gasket, locking arragement, jointing clip of all necessary fitment complete all as specified and directed. aluminium sections shall be given below including taking down old window: - Shuter frame;- Z section 2mm thick as per near by exiting Glazing beading;- 0.70 mm thick Aluminium window locking handle Glass;- 4 mm thick frosted/ plain glass ( as directed) Aluminium stopper cleat Make: (i) Anodised aluminum section : Jindal / Hindalko / Indalco. (ii) Glass: Saint gobain / Modi guard / Tata Note- Work will be carried out up to 5th storey

Supply and fix aluminium window with shutter including rubbre beeding gasket, locking arragement, jointing clip of all necessary fitment complete all as specified and directed. aluminium sections shall be given below incl taking down old window: - Shuter frame;- Z section 2mm thick as per near by exiting Glazing beading;- 0.70 mm thick Aluminium window locking handle wire mesh Stainless steel of 0.63 mm nominal dia wire and average width of arperture 1.40 mm Aluminium stopper cleat Make: (i) Anodised aluminum section : Jindal / Hindalko / Indalco. (ii) Glass: Saint gobain / Modi guard / Tata Note- Work will be carried out up to 5th storey

Supply and fix in repairs aluminium anodised partition with frame, (fixed type) shutter, and glazing 4.8 mm thick plain glass, and 12mm thick prelaminated particle board interior grade in bottom panell, glass fixed with rubber gasket with aluminium glazing clips & snap beading of following sizes;- Frame of vertical/horizontal section;- 44.5x44.5x1.22 mm thick Bottuom section;-100x44.5x1.22 mm thick Complete all as specified and directed by the Engr in charge Make: (i) Anodised aluminum section : Jindal / Hindalko / Indalco. ii) Particle board: Navipan / Puratuff / Kitlam (iii) Glass: Saint gobain / Modi guard / Tata Note- Work will be carried out up to 5th storey

Supply and fix 35 mm thick second class hardwood glazed and Skelton factory made door shutters, open rebated and prepared to receive glass/gauze etc divided into squares with plain, chamfered or rounded mitered and rebated sash bars, edges of framing plain, chamfered, fitting with cut and rebated beads for securing glass/ gauge complete all as specified in SSR Pt I-2009 section 8 clause 8.24 (a) and as directed.

Supply and fix in repair GI steel wire cloth. 0.63 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples including wooden beading complete all as specified and as directed.

Material and labour for 35mm thick IInd class hard wood plain fancy, framed panelled shutter machine made with panels of timber flat on both sides feather edged supplied and fitted to chowkats complete all as specified and directed.

Supply and fix Pressed steel frames of size 105x60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified (Note: frame shall filled with cement concrete1:2:4 type B0 ( 12.5 mm stone aggregate) complete all as specified and as directed.

Material and labour for Pressed steel frames (size 125 x 60mm) for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc,suplied and fixed, complete, as specified, and directed .Note: Frame shall filled with cement concrete 1:2:4 type B0 (12.5mm stone agg) complete all as specified and as directed.

Taking down chowkhats or frames with shutter n. exc 1.5 sqm each (without taking off shutter from the frame) complete all as specified and as directed.

Taking down Chowkats with shutter of any description exceeding 1.5 Sqm but not exceeding 4 Sqm each (Without taking off shutters from the frame) complete all as specified and as directed.

Taking down shutter of any description, exc. 1 Sqm but n. exe 2 sqm each complete all as specified and as directed.

Supply and fix factory made 100% solid wood plastic composite (WPC) door frame of size 75 mm x 50 mm x 50 mm made from wood plastic composite (single extruded process) material with density 780 Kilogram/Cubic Metre from ISO certified company door should be water proof teRunning Metreite proof fire retardant and having good screw holding capacity all as specification and drawing complete all as specified and directed by Engr-in-Charge.

Supply and fix 30 mm thick moulded WPC factory made 100% solid door (confoRunning Metreing as per IS-4020) made from 100% lead free single extruded with 2, 4 or 6 raised panel design on the front side with 10 mm deep mould on single side with wood grain texture and back side palin with density not less than 600 Kilogram/Cubic Metre. Manufactured by an ISO : 9001-2015 certified company. The door should be water proof, termiite proof, fire etardant and having screw holding capacity complete all as specified and as directed.

Material and labour for 30 mm thick, factory made flush shutters,BWR solid core construction, with block board core and plywood face, pannels, commercial type on both sides including provision of suitable blocks for taking mortice locks, latches or other fittings complete all as specified and directed.

Supply and fix mild steel framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 including necessary welding, drilling hole etc complete all as specified and directed.

Material and labour mild steel plain black sheet 0.8 mm in wall cladding steel gates and similar work cut to size, holes, punched .including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joint complete all as specified and directed

Dismaltling of AC sheeting any type (corrugated/semicorrugated, etc) in roof covering etccomplete all as specified and as directed.

Dismantling of timber scantlings 40 Sqcm and over in section in any position (framed or unframed work) complete all as specified and directed.

Supply and fix Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including complete all as specified and as directed.

Material and labour for preparation of new untreated steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Material and labour for Rolled sections tee, angle etc as in framing or cladding, glazing, door chowkat and the like fixed with angle cleats and connecting plates, etc and either hooks and hinges or steel hanging door complete all as specified and directed.

Supply and fix 100 mm size stainless steel butt hinges 204 grade, and fixed with stainless steel screws, complete all as specified and directed by Engr-in-Charge.

Supply and fix 200 mm long, solid in one piece stainless steel 204 grade, barrel tower bolts of extruded section 10mm dia shoot complete all as specified and directed by Engr-in-charge.

Supply and fix in repair 150 mm long, solid in one piece stainless steel 204 grade, barrel tower bolts of extruded section complete all as specified and directed.

Supply and fix 100 mm size solid in one piece stainless steel handles, in 304 grade and fixed in stainless steel screws all as directed complete all as specified and directed by Engr-in-Charge.

Supply and fix stainless steel sliding door bolts 204 grade, with bright bolt not less than 16mm dia with and incl a minimum of 6 bolts and nuts,and fixed 250mm long complete all as specified and directed.

Supply and fix floor door stopper of alluminium alloy body and tongue anodised, with hard drawn steel spring, fixed in floor, overall length of cover plate 140mm. complete all as specified and directed.

Supply and fix in repair 300 mm mild steel, ordinary rat tail rod pattern spring welded to steel/fixed to wooden door frame including roller and roller plate complete all as specified and directed.

Material and labour for preparation of new untreated wooden surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Taking down Aluminium door shutter size exc 1 Sqm including opening up of the corner junctions and replacement of defective members (matching with existing material) alongwith necessary cleats, butt hinges and refixing in the same opening to make the door functional complete all a specified and directed.

Hacking out old broken glass (any thickness), size quality or description from wooden frames glazed with putty or fixed with beads .complete all as specified and directed

Supply and fix 12mm thick toughened glass in any size or shape for as in door, window etc.including hacking out old glass ,complete all as specified and directed by Engr-in-charge

Supply and fix in repairs 600mm size solid in one piece stainless steel handles, all in 304 grade and fixed in glass doors as directed complete all as specified and directed by Engr-in-Charge.

Supply and fix in repairs pivot hinges steel for glass door/window complete all as specified and as directed.

Supply and fix 4 mm thick sheet glass, ordinary quality and glazing with oil putty in square n.exc 0.50sqm each pane.complete all as specified and directed

Supply and fix 4 mm thick transparent acrylic sheet, fixed with silicon sealent in square/rectangular in doors, windows etc complete all as specified and directed.

Supply and fix glazing (5.00 mm thick plain /frosted glass) in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket and aluminium snap beading etc. complete all as direted by engineer-in-charge .

Supply and fix in repairs locking Handles with screws for windows shutter etc complete all as direted by engineer-in-charge .

Supply and fix in repair Double action floor spring of approved brand and manufacture conforming to IS: 6315 hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and making good to floor to match with existing floor complete all as specified and directed by engr-in charge.

Supply and fix in repair of steel window with side hung shutters including box type hinges with steel handle and steel peg stay, complete without glazing bars, dovetailed or welded complete all as specified and directed.

Supply and fix in repair of steel window with side hung shutters including box type hinges with steel handle and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed.

Material and labour for welding in repairs length exc 2.5 cm but n. exc 5 cm & metal to be welded n.exc 6 mm thick complete all as specified and directed.

Supply and fix in repair aluminium (extruded section) Door closer hydraulically regulated, designation No.1 universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 Kilogram and fixed with stainless steel screw complete all as specified and directed.

Supply and fix in repair 1mm wall thickness stainless steel 202 Gde drapery rod 20 mm dia with incl brackets, decorative finials at both ends complete all as specified and directed.

Supply, fixing, laying & testing 15 mm dia (Nominal bore) galvanised iron water tubing 'medium grade' with and including all GI fittings such as unions, reducer sockets, socket reducing bends, elbows, tee, checknuts, caps, plugs etc. fixed complete to walls and ceilings or laid in floors incl taking up or down old tubing complete all as specified and directed.

Supply, fixing, laying & testing 20 mm dia (Nominal bore) galvanised iron water tubing 'medium grade' with and including all GI fittings such as unions, reducer sockets, socket reducing bends, elbows, tee, checknuts, caps, plugs etc. fixed complete to walls and ceilings or laid in floors incl taking up or down old tubing complete all as specified and directed.

Material and labour 25mm thick PCC 1:2:4 type B-0 (using 12.50 mm graded stone agg) for sub base to receive the screed including demolition of old PCC complete all as specified and directed.

Material and labour PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in benching to drain, holdfast, padding to roof/chhajja, coping, bed block etc. and the like edge slightly rounded or chamfered including necessary form work and demolition of existing old cement concrete (un-reinforced) not exc 15 cm thick in ground floor and paving below or above ground level complete all as specified and directed.

Material and labour cement concrete 1:3:6 type C-2 (using 40mm graded aggregate) 75 mm thick as in plinth protection / path surface finished even and smooth without using extra cement including demolition of old concrete complete all as specified and directed

Material and labour PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in foundation filling, mass concrete, sub base or leveling course of floor etc. including demolition of existing old cement concrete (un-reinforced) not exc 15 cm thick in ground floor and paving below or above ground level complete all as specified and directed.

Material and labour for non skid ceramic coloured tiles (300x 300mm) x 7 to 8mm thick as in floor set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile on and over including screed bed or bedding layers of mortar 15 mm thick for laying floor finishes in CM 1:6 and including dismantling of old tiles complete all as specified and directed

Material and labour for Glazed ceramic tiles coloured as in patches size of size 200x 300 x 6 to 7mm , as on vertical surfaces such as skirting, dados etc set and jointed in neat cement slurry and pointed in white cement to match on over and including 15 mm thick rendering in CM 1:4 for receiving tiles as in backing and including dismantling of old tiles complete all as specified and directed

Material and labour Glazed ceramic tiles coloured size of size 450x 300 x 6 to 7mm , as on vertical surfaces such as skirting, dados etc set and jointed in neat cement slurry and pointed in white cement to match on over and including 15 mm thick rendering in CM 1:4 for receiving tiles as in backing and including dismantling of tiles complete all as specified and directed

Material and labour non-skid / mat finish designed coloured joint free parking ceramic tiles of size not less than 400 mm x 400 mm x 8-10 mm thick in floor, set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15 mm thick screed in cement mortar 1:6 and including dismantling of old tiles complete all as specified and directed

Material and labour for double Charge Vitrified Ceramic tiles light shade polished (square / rectangular) of 10mm thick, area of each tile n.exc exceeding 0.36 sqm as in floor/ skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile on over and including screed bed or bedding layers of mortar 15 mm thick for laying floor finishes in CM 1:6 and including dismantling of old tiles complete all as specified and directed

Material and labour for Vitrified Ceramic tiles light shade as in patches polished (square / rectangular) of 8 -10mm thick, area of each tile n.exc exceeding 0.36 sqm as in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile on over and including screed bed or bedding layers of mortar 15 mm thick for laying floor finishes in CM 1:6 and including dismantling of old tiles complete all as specified and directed

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc complete all as specified and as directed by the Engr-in-Charge.

Material and labour for 18 - 22 mm thick machine cut Kota stone slab as in flooring over 15 mm thick screed bed in CM 1:6, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including necessary grinding, rubbing, rounding to exposed edges and polishing in granite finish complete all as specified and directed.

Material and labour for sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed.

Material and labour for 60 mm thick pre polished rubber moulded coloured machine pressed precast concrete interlocking paver block (Red or yellow) any shape and size confirming Running Metreing to IS 15658- 2006 M-35 Grade with cement with pigment including demolition of old tiles complete all as specified and as directed by the Engr-in-Charge.

Material and labour for Cutting/grinding and polishing of exterior kota stone/ terrazzo flooring complete all as specified and directed.

Material and labour 18-20 mm thick granite ( of any type) (table rubbed and polished ) in steps, jambs,pillars, window-cills, cooking plateform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

Demolition of brick work or stone/boulder masonary built in cement mortar incl all quoins arches pillars etc.complete all as specified and directed.

Material and labour for brick work with sub class ‘B’ bricks straight or curved on plan exc. 6 mtr mean radius built in CM(1:6) complete all as specified and directed.

Material and labour for brick work with sub class ’B’ bricks straight or curved on plan to any radius in half brick thick walls built in cement mortar (1:4) complete all as specified and directed.

Material and labour for walling of randam rubble uncourse stone masonary built in cement mortar (1:6) , in retaining walls, abutement and similar work complete all as specified and directed.

Material and labour raised pointing in CM 1:4 to randam rubble masonary complete all as specified and directed.

Material and labuor for Providing precast cement concrete bond stone type B-1, 1:2:4, using 20 mm graded stone agg and set in CM 1:6 for stone walling etc complete all as specified and directed.

Taking down of cement or cement lime plaster any description from brick or stone wall , ceiling etc. including raking out of joints, hacking for key, scrubbing down with water etc.complete all as specified and directed.

Material and labour for rendering 15mm thick in patches n exc 3 Sqm in cement mortar 1:4 mixed with water proofing compound of cement finished fair faces of brick/concrete surfaces of wall, even and fair without using extra cement including taking down the existing plaster complete all as specified and directed. ( WPC will be measured and paid separately).

Material and labour for rendering 15 mm thick cement plaster in CM 1:6 on brick & concrete surfaces and finished even and smooth (without using extra cement) complete all as specified and directed.

Material and labour for rendering 15mm thick in cement mortar 1:4 mixed with water proofing compound, finished fair faces of brick/concrete surfaces even and fair without using extra cement complete all as specified and directed. (WPC will be measured and paid separately).

Supply only liquid water proofing compound as per manufacturer instructions. complete all as specified and directed.

Material and labour for, preparation of new plastered/un plastered wall surfaces and applying two coats of cement base paint complete all as specified and directed.

Material and labour for two coats of oil bound distemper on new plastered surfaces of ceiling including preparation of surfaces complete all as specified and directed.

Material and labour for preparation of wall and applying wall care putty , interior grade 1 to 1.5 mm thick to make the surface smooth as specified and directed by Engr-in-Charge.

Supply and fix in repair galvanised mild steel wire cloth. 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples including wooden beading complete all as specified and as directed.

Dismantling wall and ceiling boards (fiber, pulp, insulation etc) or insulation boards/slabs/blankets any thickness incl cover fillets. complete all as specified and directed.

Supply and fix 4 mm thick 'E' board (classic) of size 600x600 mm false ceiling including & fixing of frame work made of special section MS sheet glavanised with zine coating , cellular nitro painting & consisting of angle cleats of size 25 mm wide, 1.60 mm thick with flange fixing to the ceiling with dash fastener 12.5 mmx40 mm long or with 4 mm dia GI wire or fixed with nails or bolts in GI channel 45x14x0.90 mm runner at 600 mm c/c including fixing of E board with ceiling section & perimeter of angle 25x25x0.50 mm thick complete all a specified, and directed.

Supply and fix hollow profile PVC Wall panneling consisting of 5mm thick PVC sheet inclusive of solvent and fixing to walls on PVC frame including all fillets as per specifications and drawing complete all as specified and directed.

Material and labour cutting chases, pinning in, making good to facing where required and pointing in cement mortar (1:3) to ends or edges of landings, steps, cills, sunshades, shelves lintels etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good cutting not exc 10cm girth complete all as specified and directed.

Supply and fix Rotational moulded polyethylene(triple layer white) water storage tanks 500 Ltr capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including dismantling of old water tank and remove from site complete all as specified and directed.

Supply and fix Rotational moulded polyethylene (triple layer white) water storage tanks 1000 Ltr capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including dismantling of old water tank and remove from site complete all as specified and directed.

Supply and fix Rotational moulded polyethylene (triple layer white) water storage tanks 2000 Ltr capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including dismantling of old water tank and remove from site complete all as specified and directed.

Supply and fixing in repair PVC connection 15 mm dia 450 mm long with brass fly nut at both ends complete all as specified and directed.

Supply and fix in repair vitreous china squatting pan “ORISSA PATERN” of size 580 mm x 440 mm, white, with integral foot rest (excluding flushing cistern and flush pipe) including single trap spun casted 60 cm long fix in eposy mortar connection to trap and to flushing pipe, anti syphonage pipe etc and making good to floor complete all as specified and directed.

Supply and fix in reapair 75 mm PVC floor trap, spun casted with grating including jointing to waste pipe fixed in cement concrete type B1 1:2:4 (using 20 mm graded stone aggregate) complete all as specified and as directed by the Engr-in-Charge.complete all as specified and directed.

Supply and fix in repair 10 litre capacity PVC low level cistern ‘ white’ with inlet, float valve including bracket with 32 mm dia PVC pipe 600 mm long complete all as specified and directed.

Supply and fix in repair 550x400mm Wash basin, vitreous China (Flat back) including fixing and pinning in ends of brackets including brass waste coupling of requisite size and waste pipe complete all as specified.

Supply and fix in repair pillar taps, brass, with capston heads, fancy type chromium plated, screwed down high pressure with long screwed shanks and flynuts screwed for 15mm bore iron pipe and fixed complete all as specified and directed.

Supply and fix in repair 15 mm bore Angle cock/stop valves, cast copper alloy, fancy type chromium plated screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed.

Supply and fix in repair 15mm bore Bib taps long body, cast copper alloy fancy type chromium plated with hand elbow operated handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

Supply and fix in repair stainless steel grating 100 mm dia size complete all as specified and directed.

Material and labour cleaning of water storage tank 500/1000 Ltr capacity mechanically using pressure pump with disinfectant chemical including cleaning & removing all scale & dirt etc from existing tanks, mouths of circulating pipes and outer surface of any description & washing down in the manner for the following capacity complete all as specified and directed.

Supply and fix in repairs 20 mm dia ball brass valve high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule and fixed complete all as specified and directed.

Supply and fix in repair vitreous China wash down (EWC) water closet pan(pedestal pattern), white (excluding flushing cistern and flush pipe) but including seat and cover white for pedestal pattern complete all as specfied and directed.

Supply and fix in repair Vitreous china wash down water closet pan (pedestal pattern) (cascade) single piece, white including dual type flushing cistern, Plastic water closet seat, white, closed pattern with flat bottom, and cover etc complete all as specified and directed.

Supply and fix in repair vitreous china wash hand basin white, oval type counter top of size 550mmx400mm fixed on and including cast iron cantilever bracket, 32mm dia brass waste coupling and 32 mm dia PVC waste pipe, waste fitting etc. complete all as specified and directed.

Supply and fix in repair half stall china ware urinals (wall type) complete incl plugs, bedding urinal to plugs with and incl 60 mm long screws, pointing around urinal back in cement and waste pipe etc complete all as specified and directed by Engineer in Charge.

Supply and fix 32 mm dia waste fittings, brass chromium plated for Glazedware sink, WHB, etc with long screwed shanks and flynuts, flange embedded in red lead cement and other end fixed complete all as specified and directed.

Supply and fix in repair bib taps long body, brass, fancy type, chromium plated with crutch or butterfly handles, screwed down, screwed for 15 mm bore complete all as specified and directed.

Supply and fix in repair 15 mm dia CP brass centre hole basin mixer with accessories in wash basin for mixing hot and cold water, screwed down for 15 mm dia bore GI Pipe complete all as specified and directed.

Supply and fix in repair 15 mm dia CP brass Wall mixer with provision of over head shower complete with 115 mm long bend pipe, connecting legs & wall flange complete all as specified and directed.

Supply and fix in repair CP brass angle cock 15 mm bore complete all as specified and directed.

Supply and fix in repair Plastic Water Closet seat,white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

Supply and fix in repair PVC waste pipe flexible type 32 mm dia with coupler complete all as specified and directed .

Supply and fix in repair PVC waste pipe for urinal flexible type with 50 mm dia coupler complete all as specified and directed .

Supply and fix in repair 75 mm bore UPVC (SWR) pipe 4 Kilogramf/cm2 single socketed in any length with rubber ring, fixed on wall complete all as specified and directed.

Supply and fix in repair 110 mm bore UPVC (SWR) pipe 4 Kilogramf/cm2 single socketed in any length with rubber ring, fixed on wall complete all as specified and directed.

Supply and fix in repair UPVC (SWR) bend, 75 mm bore' complete all as specified and directed.

Supply and fix in repair UPVC (SWR) junction single, (Single T) equal or unequal, 75 mm bore with oval access door complete all as specified and directed.

Supply and fix in repair UPVC (SWR) bend, 110 mm bore' complete all as specified and directed.

Supply and fix in repair UPVC (SWR) junction single, (Single T) equal or unequal, 110 mm bore with oval access door complete all as specified and directed.

Material and labour for aluminium section for frame work and fixed to wall with GI RAWAL PLUGfor wall panelling etc complete all as specified and directed.

Supply and fix 4mm thick ACP sheet fixed to alumiium frame as in cladding work fixed with self drilling screw @ center to centre 300mm complete all as specified and directed.

Material and labour for applying two coats of liquid rubberized water proofing compound in sunken portion surface on newly plastered surfaces complete all as specified and directed.

Supply and laying in repairs of 16 mm dia CPVC pipes SDR 11 and plain CPVC SDR 11 fittings on walls /ceiling or laying in floors complete all as specified and directed.

Supply and laying in repairs of 20 mm dia CPVC pipes SDR 11 and plain CPVC SDR 11 fittings on walls /ceiling or laying in floors complete all as specified and directed.

Supply and laying in repairs of 25 mm dia CPVC pipes SDR 11 and plain CPVC SDR 11 fittings on walls /ceiling or laying in floors complete all as specified and directed.

Supply and laying in repairs of 32 mm dia CPVC pipes SDR 11 and plain CPVC SDR 11 fittings on walls /ceiling or laying in floors complete all as specified and directed.

Material and labour Sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed.

Material and labour for 80 mm thick pre polished rubber moulded coloured machine pressed precast concrete interlocking paver block (yellow and red) any shape and size confirming to IS 15658- 2006 M-35 Grade with cement and no pigment including demolition of old tiles complete all as specified and as directed by the Engr-in-Charge.

Cutting around the pipe 75/100mm bore waste pipe/soil pipe including taking out plant roots up to any depth in brick masonary and rejointing in pipe joint in eppoxy mortar (Asian/Berger) and making good to existing surface all as directed by Engr-in-charge. (After the jointing pipe one week to be open for checking of leaking including scaffolding) complete all as specified and directed.

Material & Labour for stainless steel (Grade 304) railing/ corner gaurd made of hollow tubes,channels, plates, sheets etc., including welding, grinding,buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement including dismantling of old u/s railing etc complete all as specified and directed

Supply and fix in repair Solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers complete all as specified and as directed.

Material and labour for complete removal of old existing treatment of internal or external surfaces of wall complete all as specified and directed by the Engr-in-charge.

Material and labour for applying 1 mm thick interior grade wall care putty on already prepared surface to make the surfaces smooth as specified and directed by Engr-in-Charge.

Material and labour for Two coat of oil bound distemper in any tint on walls including preparation of New / old decorated surfaces of walls (plastered) by brooming down moss and efflorescent salts and trading oil and greasy spots and finally clean with sand paper complete all as directed by Engr-in-Charge.

Material and labour for Two coat of cement base paint on external wall surfaces including preparation of New /old decorated surfaces of walls (plastered) by brooming down moss and efflorescent salts and trading oil and greasy spots and finally clean with sand paper complete all as directed by Engr-in-Charge.

Material and labour for preparation of old painted surfaces of wood & wood based material of any description over 10 cm width or girth and applying one coat of Synthetic enamel Paint complete all as specified and directed.

Material and labour for preparation of old steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Supply and fix in repair 12 mm thick prelaminated particle board exerior grade in panel, rubber gasket, aluminium glazing clips complete all as specified and directed.

Supply and fix in repairs heavy duty thread type PVC water tank cover with fixing frame fixed on PVC tank with 4 Nos of screws for 500/1000 ilts tank complete all as specified and directed by the Engr-in-Charge.

Supply and fix in repair PVC connection 15 mm dia 450 mm long with bras fly nut at both ends complete all as specified and directed.

Supply and fix in repair CP health faucet with 1.20 mtr metallic expandable tube & hook complete all as specified and directed.

Supply and fix in repair plastic Water Closet seat cover, white, closed pattern with flat bottom, and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

Supply and fix in repair Towel Rail 600mm long of stainless steel grade 304 complete all as specified and directed.

cutting holes into or through brick walls built in cement mortar and wall of cement concrete for replacing existing CI/GI pipe and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-1 as required superfacial area exc 150 and nexc 400 sqcm complete all as specified and directed.

Dismantling of 75/90/100/110 /160 mm dia AC/cast iron or PVC pipes, jointed in CM and taking out complete all as specified and directed.

Supply and fix for 100mm dia cast iron soil waste and vent pipes (sand cast pipes) in any length with lead joints fixed to walls complete all as specified and directed.

Supply and fix for cast iron soil waste and vent pipes (sand cast pipes) in any length with lead joints fixed to walls, bore of pipe 75 mm dia complete all as specified and directed.

Supply and fix cast iron soil waste and vent pipe (sand cast pipes) in any length with or without ears with cement joints laid in floors or in trenches, bore of pipe 100mm complete all as specified and directed.

Supply and fix cast iron soil waste and vent pipe (sand cast pipes) in any length with or without ears with cement joints laid in floors or in trenches, bore of pipe 75mm complete all as specified and directed.

Supply and fix in repair cast iron ‘P’ trap or ‘S’ trap 100mm size complete all as specified and directed.

Supply and fix in repair cast iron floor trap for 75 mm dia, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed.

Supply and fix in repair for cast iron Branch pieces, single (equal or unequal) ordinary or inverted (spigot or socket type) of with parallel branch 100mm dia complete all as specified and directed.

Material and labour in repair for cast iron Branch pieces, single (equal or unequal) ordinary or inverted (spigot or socket type) of with parallel branch 75 mm dia with access door complete all as specified and directed.

Supply and fix in repair cast iron bends (any radius) diminishing pieces or tapers (larger bore measured) of 100mm bore of pipe fitted with oval access doors complete all as specified and directed.

All as per srl item No 149 here-in-before but for 75mm bore of pipe with oval access doors complete all as specified and directed.

All as per srl item No 149 here-in-before but for 90mm bore of pipe with oval access doors complete all as specified and directed.

Supply and fix Cast iron cowls for 100 mm bore of pipe complete all as specified and directed.

All as per item No 152 here-in-before but 75 mm bore of pipe complete all as specified and directed.

Material and labour extra for jointing of CI pipes and Fittings with and including filling of epoxy in joints for 100 mm complete all as specified and directed.

Material and labour extra for jointing of CI pipes and Fittings with and including filling of epoxy in joints for 75 mm complete all as specified and directed.

Supply and fix in repairs PVC (SWR) pipes class-I single socketed in any length with rubber ring joints fixed to wall bore pipe 150 mm including suitable sockets fixed with suitable clamp complete all as specified and directed.

Supply and fix in repairs PVC (SWR) bend of dia 150 mm complete all as specified and directed.

Excavation in trenches, n exc 1.5 mtr wide and n exc 1.5 mtr in depth for foundation etc. or for shafts, wells, cesspits, manholes, pier holes etc. n exc 10 Sqm on plan and n exc 1.5 mtr in depth and getting out in soft/loose soil complete all as specified and directed.

Material and labour for 150 mm Salt-glazed stoneware drain pipes laid in trenches and jointed complete all as specified and as directed.

Material and labour for Concrete bed in 1:3:6 type C-2 to 150 mm bore drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested; in complete all as specified and as directed.

Returning filling in including spreading leveling watering and well ramming in layers not exc 25 Cm complete all as specified and as directed.

Removing excavated material n.exc 50 m and depositing where directed at a level n exc 1.5 mtr above the starting point complete all as specified and as directed.

Material and labour for precast RCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in cover slab of man hole, septic tank, soak well etc set in cement mortar 1:4 complete all as specified and as directed.

Material and labour for mild steel TMT bars 08 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

Material and labour for taking down existing treatment (membrane) including picking, sweeping clean and washing down with water to remove dust & providing APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non woven fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application, shall be laid over hot blown bitumen grade 85/25 conforming to IS 702 @ 1.2 kg per Sqm over a coat of bituminous primer and applying aluminium reflective paint over it complete all as specified and directed.

Renewal of soakage well, excavation in any type of soil, foundation PCC 1:3:6, wall of honeycombed , Brick masonary in CM, RCC cover slab size of well 2.40 dia and 3.00m depth , including demolition of existing old unserviceable soakage well and filling soil to match surface with existing ground surface complete all as specified and directed. Note:- the rate of soil for filling in old U/S soakage well is included with this item.

Taking down carefully copper /aluminium point wiring (light, fan , socket or power) complete, fittings such as switches, ceiling roses, pendants, regulators sockets light fitting etc removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls/floors and reuse the serviceable fittings under respective items complete all as directed.

Material and labour point wiring with 1.5 Sqmm (Nominal area) FRLS PVC insulated and unsheathed single core cable 1100 Volts grade with stranded copper conductor in and including concealed rigid PVC conduit medium grade including accessories incl cutting chases etc along with continuous earth wire 1.5 Sqmm FRLS PVC insulated, unsheathed stranded copper conductor cable and connected to common earth dolly, with and including 1.6mm thick cadmium plated sunk MS pressed steel terminal boxes with 3.0 mm thick hylum sheet cover fixed with brass screw complete with all accessories for one light point/Fan point controlled by one ,one way switch .

All as per Item No 168 mentioned here-in- before but one three pin 5 Amps socket out let on the same board with other switches complete all as specified and directed.

All as per Item No 168 mentioned here-in- before but one three pin 5 Amps switch socket out let on the independent board with other switches complete all as specified and directed.

All as per Item No 168 mentioned here-in- before but One bell/buzzer point controlled by bell push complete all as specified and directed.

All as per Item No 168 mentioned here-in- before but one three pin 15 Amps switch socket out let on the independent board with 2.5 sq mm PVC insulated FRLS copper conductor and 2.5 Sqmm FRLS copper conductor for continuous earthing complete all as specified and directed.

Supply and fix in repair Switch piano flush type single pole one way 230 Volts 6 Amp complete all as specified and directed.

Supply and fix in repair Socket outlet 3 pin , 230 Volts 5/6 Amps multipurpose 5 pin complete all as specified and directed.

Supply and fix in repair bell push flush type 5 Amps 230 Volts single pole complete all as specified and directed.

Supply and fixing in repair Socket outlet multipurpose having provision for 3 pin, 230 Volts 15/16 Amp and 3 pin, 5/6 Amp, piano flush type IS: 1239-1988 marked with valid CML No complete all as specified and directed.

Supply and fixing in repair Switch piano flush type, single pole, one way, 230 Volts 15/16 Amps marked with valid CML No. complete all as specified and directed.

Supply and fixing in repair Ceiling rose, three terminal ISI marked surface bakelite suitable for batten fitting complete all as specified and directed.

Supply and fix in repair anglurar Lamp holder, PVC/polycarbonate type with back plate suitable for batten fittings complete all as specified and directed.

Supply and fix in repair stepped type regulator socket type double module 5 step for ceiling fan 1200/1400 mm size 230 volts, 6 Amps 120 watts complete all as specified and directed.

Supply and fix in repair LED tube light fitting batten type all in one single phase 18/20 W with lamp 6500/4000 K complete pre-wired all accessories complete all as specified and directed.

Supply and fix LED bollard type fitting 10 Watt cpacity 650 mm height, LED bollard AFlare fitted with low glare diffuser with IP 65 protection, complete with necessary pcc foundation including taking down existing old pattern unserviceable light fitting all as specified and directed.

Supply and fixing in repair LED flood light 120 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp complete all as specified and directed.

Supply and fix in repair Flood light 50 Watt RGB Colour, complete all as specified and as directed .

Supply and fix in repair LED focus light 12 Watt complete all as specified and directed.

Supply and fix in repair LED 3 Watt Warm White scenery light complete all as specified and directed.

Supply and fix in repair round shaped LED downlights are made with injection moulded polycarbonate housing with snap fit/screw fit arrangement of polycarbonate/aluminium spun ring for surface mounting of capacity 12 Watt with all accessories and including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

Supply and fix in repair LED tube rod 18 watt made out of polycarbonate acrylic diffuser lumen out put 1800 lumens complete all as specified & directed.

Supply and fix in repairs hydrant valve stainless steel with single outlet, grade with 80 mm N.B. flanged inlet, 63mm female instantaneous outlets, complete with blank caps chains, bearings IS:6290 mark and having ISI MARKED (Yard Hydrant) complete all as specified and directed.

All as per item No 189.00 here -in-before but double headed complete all as specified and directed.

Supply and fix in repairs fire hose cabinet to house 02 Nos hose pipe, Nozzle, branch pipe and fire mean axes, including all other related accessories fabricated from 16 gauge M.S. sheet of fully welded construction of size 800x600x250 mm min having front 4 mm thick glass door written with "BREAK IN CASE OF FIRE" painted with two coat of signal red paint over a coat of red oxide primer and two coat of brilliant white paint over one coat of red oxide primer internally with locking arrangement complete all as specified and directed.

Supply and fix in repairs first aid hose reel (swinging type) including 30 meter long 20 mm internal dia rubber lined hose reel tubing,25 mm dia stainless steel stop valve, shut off nozzle of sufficient length incl fixing of one end with hose real nozzle and other end to hose real pipe with wet riser with suitable arrangement ISI marked complete all as specified and directed.

Supply only branch pipe stainless steel 63 mm dia instaneous type inlet made thread outlet 15 mm dia Nozzles.ISI MARKED complete all as specified and directed.

Material and labour required for refilling of 5 KG ABC type fire extinguisher of 70-90% MAP complete incl decaning of existing material and refilling with fresh powder with cartridge etc complete incl disposal of existing retrieved material as per CPCB norms complete all as specified and directed.

All as per item No 194.00 here in above but 4.5 KG CO2 type complete all as specified and directed.

All as per item No 194.00 here in above but 3.0 KG CO2 type complete all as specified and directed.

All as per item No 194.00 here in above but 2.0 KG CO2 type complete all as specified and directed.

All as per item No 194.00 here in above but 9.0 Ltr water foam type complete all as specified and directed.

Dismantiling existing unserviceable 200 LPD to 500 LPD solar water heating system etc and re-fixing its original position after necessary repair/ replacement of unserviceable spares (Evacuated Tube Collector) all as specified and directed. Note : Replacement of spares shall be measured & paid separately under respective items of Sch 'A'.

Material and labour for cleaning of solar water heating system dismantled against item No 199 above and Servicing of solar water heater system by Cleaning complete tubes and internally, Anti-scaling Cleaning of all effected parts . Removing any type of chocking of Solar Collector or tube, repairing any type leakage from Gasket, Rubber Washer after Cold Water inlet and before hot water outlet of Solar Water Heater with cleaning agent complete all as specified and directed.

Supply and fix in repair hot water pipe line 20 mm dia (heavy grade) duly insulated with glass wool 50 mm and aluminum cladding complete all as specified and directed.

Supply and fix in repair hot water pipe line 40 mm dia (heavy grade) duly insulated with glass wool 50 mm and aluminum cladding complete all as specified and directed.

Supply and fix in repair 50 mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

Supply and fix in repair PVC water storage tank multylayer of 500 ltrs capacity, cylindrical, vertical with closed top, hoisted and fixed in position with and including 20 mm bore PTMT ball valve, high pressure with epoxy coated aluminium rod and high density plastic ball, screwed for 20 mm bore iron pipe and connecting to inlet and outlet pipes complete all as specifed and directed.

Supply and fix in repair rotational moulded stainless steel water storage tanks (Cylindrical, vertical with closed top) double layer confirming to IS:12701-96 complete with outer surface insullation material and thick aluminium sheet including provision of all inlet outlet overflow and drain pipe fitting complete, all as specified and directed by Engineer in Charge capacity 300 Ltrs.

Supply and fix in replacement heating element of capacity of 3 KW, thread type, suitable for solar water heating system complete all as specified and directed.

Supply and fix in replacement thermostat, suitable for solar water heating system complete all as specified and directed.

Supply and fix in repair solar water heating system evacuated tube any size complete all as specified and directed.

Supply and fixing 3 core twisted aluminium flexiable weather proof cable PVC insulated and unsheathed multistranded copper conductor of size 4 sq mm confirming to relevent IS complete all as specified & directed including taking out old unserviceable cable.

Supply and fix in repair of u/s OT light bulb 50 Watt 12 V as per existing make & watt suitable for existing OT lights complete all as specified and as directed.

Supply and fixing of maintenance free lead acid sealed battery 12 Volts 7 Ah complete all as specified and directed.

Supply and fixing of maintenance free lead acid sealed battery 12 Volts 14 Ah complete all as specified and directed.

Supply and fixing of relay 5 Amp 240 Volt AC/28VDC complete all as specified and directed. Make :- omrom model No MY4N or equivalent in Legrand, C&S.

Material and labour for earthing complete with galvanized steel plate electrodes of size 600mm x 600mm x 6mm thick buried directly in ground with earth pit not less than 2.25m deep below normal ground level with top edge of plate not less than 1.5 m below normal ground level connected to galvanized wire 4 mm earth lead by means of nuts bolts check nuts GI washers earth wire protected by galvanized iron pipe 15 mm bore (light grade) including concrete pit in PCC (1:3:6) type CI, precast RCC cover slab of size 30x30x10 cm with one handle for lifting made out of 8 mm dia MS bar funnel wire mesh 20 mm bore galvanized iron pipe (medium grade) for watering charcoal or coke and salt in alternate layers necessary earth work in soft/loose soil complete all as shown in electrical plate No 3 of SSR part 1 including testing on completion all as specified and directed. incl demolition to existing one complete. Note: (i) Earthing has to done by spl persons and if the desired earth resistance is not found within permissible limit shall be redone by contractor at no extra cost. (ii) Cost of GI wire 4 sqmm and 15 mm dia pipe medium grade upto 7.5 mtr is included in the rate quoted for this item

Material and labour in repair for sub main wiring with approved colour coding as per IS (Red, Black and Green for single phase circuits) with Two runs of 6 Sq mm as current carrying conductor and one run of 6 Sq mm as earth conductor PVC insulated FRLS cable with multi stranded copper conductor of nominal cross section area as under and drawing into and including concealed PVC non metallic rigid conduit medium grade complete all as specified incl taking down old u/s sub main. Note:- Three runs of wire and one run of pipe shall be measured as one meter only for payment purpose.

R K BUILDERS

M/s Vinod Singh Negi

M/S JAI PRAKASH GOEL

Bidder Name

M/S JAI PRAKASH GOEL