Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹7.1 LAccepted-AOC 108 MARUTI COMPLEX NEAR DIGVIJAY TIN FACTORY MILE STONE BUILDING KV ROAD JAMNAGAR 361001 | JAMNAGAR | JAMNAGAR | GUJARAT | 361001 | L1 | Accepted-AOC AOC | |
| 2 | L2₹8.9 L+₹1.5 L (20.5%)Rejected-Finance | L2 | Rejected-Finance NOT L1 |
Tender Value
Refer Docs
EMD Value
₹16,000
Closing Date
6 Oct 2020, 6:00 pmClosed
AGE I A Jamnagar
INFANTRY LINES JAMNAGAR
MAINT REPAIR /RENEWAL OF CENTRIFUGAL PUMP SET AND ITS CONNECTED ITEMS OF ARMY PUMP HOUSES AT MILY STATION , JAMNAGAR
2020_MES_369328_2
8755
Open Tender
Civil Works
Item Wise
180 days
Jamnagar
AS PER TENDER
6 documents required · 6 mandatory
₹500
Yes
₹16,000
Yes
10 Nov 2020
15 Sept 2020
7 Oct 2020
22 Sept 2020
6 Oct 2020
22 Sept 2020
Amount
Disconnecting the unserviceable single/double stage centrifugal pumping set, 100 HP dismantling the same for overhauling, repairing and replacing the unserviceable parts including installing, commissioning for proper alignment and smooth functioning. complete all as directed by Engr-in-charge (Note: Spare parts will be measured and paid separately under item 1.01 to 1.12)
M&L for making connection in suction and delivery side with necessary packing, nut bolts etc. for cast iron impellor with key for pumping set as per existing make complete all as directed by Engr-in-charge.
M&L for making connection in suction and delivery side with necessary packing, nut bolts etc. cast iron impellor neck ring as per existing make complete all as directed by Engr-in-charge.
M&L for making connection in suction and delivery side with necessary packing, nut bolts etc. for cast iron impellor metal bush as per existing make complete all as directed by Engr-in-charge.
M&L for making connection in suction and delivery side with necessary packing, nut bolts etc. for pump shaft made of steel as per existing make complete all as directed by Engr-in-charge.
M&L for making connection in suction and delivery side with necessary packing, nut bolts etc. for Double roller ball bearing of Size 3309 as per existing make complete all as directed by Engr-in-charge.
M&L for making connection in suction and delivery side with necessary packing, nut bolts etc. for steel bush with nut for pump shaft as per existing make complete all as directed by Engr-in-charge.
M&L for making connection in suction and delivery side with necessary packing, nut bolts etc. for bearing housing as per existing make complete all as directed by Engr-in-charge.
M&L for making connection in suction and delivery side with necessary packing, nut bolts etc. for rubber 'O' ring as per sample complete all as directed by Engr-in-charge.
M&L for making connection in suction and delivery side with necessary packing, nut bolts etc. for coupling for pumping set pin and bush type with coupling bolt and key complete in all respect duly machined grooved for key way & key as per existing make complete all as directed by Engr-in-charge.
M&L for making connection in suction and delivery side with necessary packing, nut bolts etc. for CI iron gland flange with stud as per existing type complete all as directed by Engr-in-charge.
Remetalling of pump shaft turning on lathe to standard size cutting grooves key ways threads for check nuts etc complete with grinding and polishing complete all as required and directed by Engr-in-charge.
M&L for making connection in suction and delivery side with necessary packing, nut bolts etc. for star rubber coupling with alignment of pump and motor as per existing make complete all as directed by Engr-in-charge.
Disconnecting the unserviceable single/Double stage centrifugal pumping set, 75 HP dismantling the same for overhauling, repairing and replacing the unserviceable parts including installing, commissioning for proper alignment, smooth functioning. complete all as directed by Engr-in-charge (Note: Spare parts will be measured and paid separately under item 2.01 to 2.12
M&L for making connection in suction and delivery side with necessary packing, nut bolts etc. for cast iron impellor with key for pumping set as per existing make complete all as directed by Engr-in-charge.
M&L for making connection in suction and delivery side with necessary packing, nut bolts etc. cast iron impellor neck ring as per existing make complete all as directed by Engr-in-charge.
M&L for making connection in suction and delivery side with necessary packing, nut bolts etc. for cast iron impellor metal bush as per existing make complete all as directed by Engr-in-charge.
M&L for making connection in suction and delivery side with necessary packing, nut bolts etc. for pump shaft made of steel as per existing make complete all as directed by Engr-in-charge.
M&L for making connection in suction and delivery side with necessary packing, nut bolts etc. for Double roller ball bearing of Size 3307 as per existing make complete all as directed by Engr-in-charge.
M&L for making connection in suction and delivery side with necessary packing, nut bolts etc. for steel bush with nut for pump shaft as per existing make complete all as directed by Engr-in-charge.
M&L for making connection in suction and delivery side with necessary packing, nut bolts etc. for bearing housing as per existing make complete all as directed by Engr-in-charge.
M&L for making connection in suction and delivery side with necessary packing, nut bolts etc. for rubber 'O' ring as per sample complete all as directed by Engr-in-charge.
M&L for making connection in suction and delivery side with necessary packing, nut bolts etc. for coupling for pumping set pin and bush type with coupling bolt and key complete in all respect duly machined grooved for key way & key as per existing make complete all as directed by Engr-in-charge.
M&L for making connection in suction and delivery side with necessary packing, nut bolts etc. for CI iron gland flange with stud as per existing type complete all as directed by Engr-in-charge.
Remetalling of pump shaft turning on lathe to standard size cutting grooves key ways threads for check nuts etc complete with grinding and polishing complete all as required and directed by Engr-in-charge.
M&L for making connection in suction and delivery side with necessary packing, nut bolts etc. for star rubber coupling with alignment of pump and motor as per existing make complete all as directed by Engr-in-charge.
Disconnecting the unserviceable single stage centrifugal pumping set, 60 HP dismantling the same for overhauling, repairing and replacing the unserviceable parts including installing, commissioning for proper alignment and smooth functioning, making connection suction and delivery side with necessary packing, nut bolts etc complete all as directed by Engr-in-charge (Note: Spare parts will be measured and paid separately under item 3.01 to 3.12
M&L for making connection in suction and delivery side with necessary packing, nut bolts etc. for cast iron impellor with key for pumping set as per existing make complete all as directed by Engr-in-charge.
M&L for making connection in suction and delivery side with necessary packing, nut bolts etc. cast iron impellor neck ring as per existing make complete all as directed by Engr-in-charge.
M&L for making connection in suction and delivery side with necessary packing, nut bolts etc. for cast iron impellor metal bush as per existing make complete all as directed by Engr-in-charge.
M&L for making connection in suction and delivery side with necessary packing, nut bolts etc. for pump shaft made of steel as per existing make complete all as directed by Engr-in-charge.
M&L for making connection in suction and delivery side with necessary packing, nut bolts etc. for Double roller ball bearing of Size 3109 / 3110 as per existing make complete all as directed by Engr-in-charge.
M&L for making connection in suction and delivery side with necessary packing, nut bolts etc. for steel bush with nut for pump shaft as per existing make complete all as directed by Engr-in-charge.
M&L for making connection in suction and delivery side with necessary packing, nut bolts etc. for bearing housing as per existing make complete all as directed by Engr-in-charge.
M&L for making connection in suction and delivery side with necessary packing, nut bolts etc. for rubber 'O' ring as per sample complete all as directed by Engr-in-charge.
M&L for making connection in suction and delivery side with necessary packing, nut bolts etc. for coupling for pumping set pin and bush type with coupling bolt and key complete in all respect duly machined grooved for key way & key as per existing make complete all as directed by Engr-in-charge.
M&L for making connection in suction and delivery side with necessary packing, nut bolts etc. for CI iron gland flange with stud as per existing type complete all as directed by Engr-in-charge.
Remetalling of pump shaft turning on lathe to standard size cutting grooves key ways threads for check nuts etc complete with grinding and polishing complete all as required and directed by Engr-in-charge.
M&L for making connection in suction and delivery side with necessary packing, nut bolts etc. for star rubber coupling with alignment of pump and motor as per existing make complete all as directed by Engr-in-charge.
Disconnecting the unserviceable centrifugal pumping set, split casing single stage of capacity 20 HP to 40 HP any make dismantling the same for overhauling, repairing and replacing the unserviceable parts including installing, commissioning for proper alignment and smooth functioning, making connection in suction and delivery side with necessary packing, nut bolts etc complete all as directed by Engr-in-charge. (Note: Spare parts will be measured and paid separately under item 4.01 to 4.12
M&L for making connection in suction and delivery side with necessary packing, nut bolts etc. for cast iron impellor with key for pumping set as per existing make complete all as directed by Engr-in-charge.
M&L for making connection in suction and delivery side with necessary packing, nut bolts etc. cast iron impellor neck ring as per existing make complete all as directed by Engr-in-charge.
M&L for making connection in suction and delivery side with necessary packing, nut bolts etc. for cast iron impellor metal bush as per existing make complete all as directed by Engr-in-charge.
M&L for making connection in suction and delivery side with necessary packing, nut bolts etc. for pump shaft made of steel as per existing make complete all as directed by Engr-in-charge.
M&L for making connection in suction and delivery side with necessary packing, nut bolts etc. for Double roller ball bearing of Size 1106 / 1107 as per existing make complete all as directed by Engr-in-charge.
M&L for making connection in suction and delivery side with necessary packing, nut bolts etc. for steel bush with nut for pump shaft as per existing make complete all as directed by Engr-in-charge.
M&L for making connection in suction and delivery side with necessary packing, nut bolts etc. for bearing housing as per existing make complete all as directed by Engr-in-charge.
M&L for making connection in suction and delivery side with necessary packing, nut bolts etc. for rubber 'O' ring as per sample complete all as directed by Engr-in-charge.
M&L for making connection in suction and delivery side with necessary packing, nut bolts etc. for coupling for pumping set pin and bush type with coupling bolt and key complete in all respect duly machined grooved for key way & key as per existing make complete all as directed by Engr-in-charge.
M&L for making connection in suction and delivery side with necessary packing, nut bolts etc. for CI iron gland flange with stud as per existing type complete all as directed by Engr-in-charge.
Remetalling of pump shaft turning on lathe to standard size cutting grooves key ways threads for check nuts etc complete with grinding and polishing complete all as required and directed by Engr-in-charge.
M&L for making connection in suction and delivery side with necessary packing, nut bolts etc. for star rubber coupling with alignment of pump and motor as per existing make complete all as directed by Engr-in-charge.
Disconnecting the electric induction motor 3 phase, capacity of 100 HP, separating pumping set and electric motor, dismantling the electric motor for separating the stator and rotor and carring out the following repairs and after repairs making necessary electric connection, jointing /coupling with pumping set, making alignment and testing complete for smooth functioning.
Cutting out the burnt winding of all the three phases of stator, taking out burnt copper wire from the slots cleaning the slots properly, rewinding the three phases with original gauge, supper enameled copper winding wire including insulating materials i.e., varnish, cotton tape, insulating paper, sleeves drying the windings to require temperature, reassembling the rotor and stator after cleaning and dusting of rotor to remove the settled dust particles all as directed by Engr-in-charge.
Replacement of ball bearings as per existing size 5309 and sample all as specified & directed by Engr-In-Charge
M&L for bearing housing as per existing size and sample all as specified & directed by Engr-In-Charge
M&L for shafting and turnning at lathe of motor shaft as per existing size and sample all as directed by Engr-in-charge.
Disconnecting the electric induction motor 3 phase, capacity of 75 HP, separating pumping set and electric motor, dismantling the electric motor for separating the stator and rotor and carring out the following repairs and after repairs making necessary electric connection, jointing /coupling with pumping set, making alignment and testing complete for smooth functioning.
Cutting out the burnt winding of all the three phases of stator, taking out burnt copper wire from the slots cleaning the slots properly, rewinding the three phases with original gauge, super enameled copper winding wire including insulating materials i.e., varnish, cotton tape, insulating paper, sleeves drying the windings to require temperature, reassembling the rotor and stator after cleaning and dusting of rotor to remove the settled dust particles complete all as directed by Engr-in-charge.
Replacement of ball bearings as per existing size 6307 and sample all as directed by Engr-in-charge.
M&L for bearing housing as per existing size and sample all as directed by Engr-in-charge.
M&L for shafting and turnning at lathe of motor shaft as per existing size and sample all as directed by Engr-in-charge.
Disconnecting the electric induction motor 3 phase, capacity of 60 HP, separating pumping set and electric motor, dismantling the electric motor for separating the stator and rotor and carring out the following repairs and after repairs making necessary electric connection, jointing /coupling with pumping set, making alignment and testing complete for smooth functioning.
Cutting out the burnt winding of all the three phases of stator, taking out burnt copper wire from the slots cleaning the slots properly, rewinding the three phases with original gauge, super enameled copper winding wire including insulating materials i.e., varnish, cotton tape, insulating paper, sleeves drying the windings to require temperature, reassembling the rotor and stator after cleaning and dusting of rotor to remove the settled dust particles complete all as directed by Engr-in-charge.
Replacement of ball bearings as per existing size 6510 and sample all as directed by Engr-in-charge.
M&L for bearing housing as per existing size and sample all as directed by Engr-in-charge.
M&L for shafting and turnning at lathe of motor shaft as per existing size and sample all as directed by Engr-in-charge.
Disconnecting the electric induction motor 3 phase, capacity of 40 HP, separating pumping set and electric motor, dismantling the electric motor for separating the stator and rotor and carring out the following repairs and after repairs making necessary electric connection, jointing /coupling with pumping set, making alignment and testing complete for smooth functioning.
Cutting out the burnt winding of all the three phases of stator, taking out burnt copper wire from the slots cleaning the slots properly, rewinding the three phases with original gauge, super enameled copper winding wire including insulating materials i.e., varnish, cotton tape, insulating paper, sleeves drying the windings to require temperature, reassembling the rotor and stator after cleaning and dusting of rotor to remove the settled dust particles complete all as directed by Engr-in-charge.
Replacement of ball bearings as per existing size 8010 and sample all as directed by Engr-in-charge.
M&L for bearing housing as per existing size and sample all as directed by Engr-in-charge.
M&L for shafting and turnning at lathe of motor shaft as per existing size and sample all as directed by Engr-in-charge.
Disconnecting the electric induction motor 3 phase, capacity of 20-30 HP, separating pumping set and electric motor, dismantling the electric motor for separating the stator and rotor and carring out the following repairs and after repairs making necessary electric connection, jointing /coupling with pumping set, making alignment and testing complete for smooth functioning.
Cutting out the burnt winding of all the three phases of stator, taking out burnt copper wire from the slots cleaning the slots properly, rewinding the three phases with original gauge, super enameled copper winding wire including insulating materials i.e., varnish, cotton tape, insulating paper, sleeves drying the windings to require temperature, reassembling the rotor and stator after cleaning and dusting of rotor to remove the settled dust particles complete all as directed by Engr-in-charge.
Replacement of ball bearings as per existing size and sample all as directed by Engr-in-charge.
M&L for bearing housing as per existing size and sample all as directed by Engr-in-charge.
M&L for shafting and turnning at lathe of motor shaft as per existing size and sample all as directed by Engr-in-charge.
S & F Mechanical Seal for 75 HP single stage centrifugal pump set as per exiting size and sample all as Specified and directed by Engr-In- Charge.
M&L painting to motors, pumpsets, MS Channels, foundation, suction and delivery pipes of pumpsets upto 5m including cleaning the surfaces of any description and in any position and applying one coat of synthetic enamel paint including colour codes and writing letters of SM No. and MES No. etc., complete all as specified and directed by Engr- in- Charge. for following capacities of pump sets:-
MS pipe/CI pipe of any size not exc. 60 cm girth as directed by Engr- in- Charge.
Supply and fix in replacement CI foot valve flange type complete including packing materials, nut bolts etc suitable for 200 mm dia suction line complete all as specified and directed. Make: NORMEX or equivalent ISI marked.
All as per item No.12 here-in-before but 150 mm dia. Make: NORMEX or equivalent
All as per item No. 12 here-in-before but 80 mm dia. Make: NORMEX or equivalent
S&F for Gland rope of 8 mm and 10 mm dia for pump set of all as specified and directed by Engr-in-Charge.
S&F of different sizes of nut & bolt, stud etc for pump set all as specified and directed by Engr-in-Charge.
S&F of Grease for bearing of pump set all as specified and directed by Engr-in-Charge.
S&F of exhaust fan of induction motor complete all as per existing size/pattern for 40 HP to 100 HP motor.
S&F in repair terminal connection plate (six terminal) made of heavy duty hylem sheets with copper nut and bolts washers complete all as per existing size/pattern for 40 HP to 100 HP motor.
S&F in repair terminal connection plate (six terminal) made of heavy duty hylem sheets with copper nut and bolts washers complete all as per existing size/pattern for 15 HP to 30 HP motor.
S&F in brass Air release cock with fixing arrangement as as per exiting size and sample all as specified and directed by Engr-In- Charge.
S & F copper pipe of 8 to 12 mm dia upto 0.75 mt length with nut for cooling of gland rope of pump set as per exiting size and sample all as specified and directed by Engr-In- Charge.
M&L for repairing/replacement of leather sheet with nut and bolts complete in foot valve and NRV etc all as specified and directed.
S&F of panel mounted ammeter of three phase with accuracy class 0.5 all as specified and directed.
S&F of panel mounted voltmeter of three phase with accuracy class 0.5 all as specified and directed.
Dara Paras.D
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .