Source level augmentation of water supply scheme under Jal Shakti Section Jhandutta from Seer Khad in Tehsil Jhandutta Distt Bilaspur under JAL JEEVAN MISSION Job No I

Amount

Providing, installation, testing and commissioning of Water Treatment Plant of 1.15 MLD capacity ( in the shape of rapid sand filter) of RCC construction in concrete design mix of grade M-30 (for hydraulic structures) & M-20 but not leaner than 1:1.5:3( for building work) as per proper design & drawing with all structural requirements including cost of construction of cutting for site development , C/o. retaining wall ,civil works, hoisting and errection of all steel works, providing and installation of all mechanical Electrical equipments/accessories, laying of all interconnecting GI/MSERW pipes and scouring arragements from all units with disposal of the same to appropriate place i.e. nearby nallah/khud/natural drainage, all types of valves, fittings and all other contingent works including cost of site development to adjust hydraulic levels as per proper layout contour plan at left bank of Seer khad near (Kabreta) Dharar Prohoo & capable of taking input and giving output under all climatic conditions specified therein. The treatment plant includes C/O. Inlet chamber, Raw Water Tank,Presetteling tank,pashal flume, Alum solution tanks, Alum solution dozer, Lime solution tanks, Flash mixer , flocculator, Settling tank, Rapid Sand Filter with v-wire screen item, Back wash arrangement, Back wash pump and piping, Back wash pump house, Disinfection, Clear water tank, Foundation of various units, By Pass arrangement, Scour arrangement, Plant Building, Bearing capacity test, Laboratory equipment and furniture , Interconnecting paths, Walk ways, Boundary Wall, Inlet channel with ultra sonic channel flow meter, Chemical house with chemical handling and feeding arrangements, Providing and fixing of lighting arrangements with CUB LED lights of 25 Watts with in the boundry limit of plant area, The hydraulic design & capacity/sizes of all the important units shall be based on latest guidelines of Manual of Water Supply and Treatment published by CPHEEO, Ministry of Urban development (GOI) New Delhi. The structural design of various units shall strictly conform to relevant BIS Codes and specifications. Common design parameter for further details).

Schedule-B2 Construction of storage tanks.

Main Balancing Reservior and Sector Reserviors:- Designing, Constructing, Testing & Commissioning (to be approved by the competent authority) RCC Circular under ground/partial under ground storage reservoirs as per capacity given below at various stages/sites including excavation in foundation in all kinds of soil. including PCC (1:3:6) in foundation and M:30 design mix but not leaner than1:1.5:3 in bottom slab/raft ,walls and beams. and RCC (1:1.5:3) in roof slab/dome with provision of inspection path around the dome with all alied Civil Works such as c/o chamber for valves, refilling and disposing of surplus excavated earth with in all leads and lifts. The job also includes providing lowering, laying, erecting, hoisting and jointing of pipe assembly for inlet, outlet, overflow and scour pipe with bye pass arrangement consisting of GI / MS pipes special and valves of required classes and dia and all other accessories required such as MS ladders inside and outside, CI cowl type ventilator, SFRC manhole covers with frames of heavy duty with proper locking arrangement, water level indicator. The tanks shall be hydraulically tested for water tightness, All works shall be conforming to relevant IS code. The cost of valves,bulk meter/ flow meter shall be included in the rates of tanks .complete in all respects to the entire satisfaction of the Engineer-in-charge .The contractor shall provide 6 sets of approved drawing and design to the department including cost of site development required as per site conditions. (Refer Data sheet No. 1).

storage tank 211000 ltrs Node No. 3

storage tank 69500 ltrs.Node No. 4

storage tank 111800 ltrs. Node No. 6

storage tank 42200 ltrs. Node No. 7

storage tank 20000 ltrs. Node No. 8

storage tank 16000 ltrs.Node No. 10

storage tank 59000 ltrs. Node No. 12

storage tank 17000 ltrs.Node No. 14

storage tank 10000 ltrs. Node No. 9

Schedule B3 C/ o Pump house cum chowkidar quarter and providing and fixing electrical installation

Excavation in foundation and trenches etc.(in pipes and pits) in all kinds of soils such as pick work, jumper work, blasting in soft/hard rock, chiselling/wedging out of rock/where blasting prohibited) saturated soil stacking the excavated soil as directed by the Engineer-in-charge clear from the edge of excavation and then returning the stacked soil in 15cm layers when required into plinth sides of foundation etc. consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth as directed by the Engineer –in-charge in all leads and lifts.

Providing and laying cement concrete 1:6:12 (1Cement:6sand:12 graded stone aggregate 40mm nominal size) and curing complete excluding the cost of form work foundation and plinth in all leads and lifts

Random rubble masonry /Polygonal rubble masonry (uncoursed brought to courses) with hard stone of approved quality in foundation and plinth i/c levrlling up with cement concrete 1:6:12 ( 1cement :6sand :12 graded stone aggregate 20mm nominal size at plinth level in cement mortar 1:6 (1cement :6 sand).

Brick work using common burnt clay building bricks (IInd class) in super structure above plinth level upto floor two level in cement mortar 1:6 (1cement:6 sand) in all leads and lifts.

Half brick masonry in common brunt clay building in cement mortar 1:4 (1cement :4sand). 2nd class bricks.

Providing and fixing pressed steel doors frams manufactured from commercial mild steel sheet of 1.25 mm thickness including hinges, jamb lock jamb, beed & if required angle threshold of mild steel angle of section 50x25 mm or base ties of 1.25 mm pressed mild steel welded or regidly fixed together by mechanical means, adjustable lugs with split & tails to each jamb including sheel butt hinges 2.5 mm thick with guards, lock strike plare and shock as specified and applying a coat of approved steel primer after pretreatment of the surface as directed by ENGINEER IN CHARGE. ( PROFILE "A" )

Providing and fixing wood paneled glazed or paneled and glazed shutters for doors, windows and clear story 40mm thick windows including bright finished black enameled iron with necessary screws with second class deodar wood 40mm thick in all leads and lifts.

Providing form work with steel plates 3.15mm thick welded with angle iron in frame 30x30x5mm, so as to give a fair finish including centring, shuttering , strutting and propping etc. with wooden battens and ballies height of propping and centering below supporting floor to ceiling not exceeding 4meters and removal of the same for insitu reinforced concrete and plain.

Flat surfaces such as soffits of suspended floors, roofs, landings and the like floors upto 200mm in thickness.

Beams,cantilevers,girders & lintels, sides & soffits of beams, haunching,cantilevers,bressumers 1.00 mts. In depth in all heights

Sloping or battering surfaces including folded plates.

Edges of slab and breaking floors and walls under 20cms wide.

Providing and laying cement concrete work 1:1.5:3(1cement:1.5sand: 3 graded stone aggregate 20mm nominal size ) and curing complete excluding the cost of form work and reinforcement for reinforced concrete work in:-

Suspended floors, roofs, landings and shelves and their supports, balconies, beams, girders bressumers and cantilevers upto all floor level.

Kota stone slab flooring 20mm (average ) thick base of cement mortar 1:4(1cement:4sand) laid over and jointed with grey cement slurry mixed with pigment to match shade of the slab including rubbing and polishing complete 25mm thick.

15mm cement plaster in single coat of rough sides of bricks/concrete stone walls for interior plastering upto floor two level including arrises internal rounded angles chamber and rounded angles not exceeding 80mm in girth and finished even and smooth in cement mortar4 1:6(1cement:6sand) with in all leads and lifts.

20mm cement plaster in single coat of rough sides of bricks/concrete stone walls for interior plastering upto floor two level including arrises internal rounded angles chamber and rounded angles not exceeding 80mm in girth and finished even and smooth in cement mortar4 1:6(1cement:6sand) with in all leads and lifts.

6 mm cement plaster to ceiling in CM 1:3 (1Cement :3 Sand)

Providing plinth protection 50mm thick in cement concrete 1:3:6 (1cement:3sand:6 graded stone aggregate 20mm nominal size) including finishing of the top surface of concrete smooth in all leads and lifts.

Providing Tor steel reinforcement for RCC work including bending,binding & placing in position complete upto floor two level.

Applying two coat of steel preservative on new steel based surface after and including preparing the surface by thoroughly cleaning dirt dust and other foreign matter.

Applying priming coat over new wood and wood based surface after and including preparing the surface by thoroughly cleaning oil dirt grease and other foreign matter sand papering and knotting ready mixed paint brushing wood primer pink in all leads and lifts.

Painting two coats(excluding priming coat) on new wood and wood based surface with ready mixed paint brushing the give and even shade including cleaning of all dirt dust and other foreign matter and sand papering and stopping with ready mixed paint other than white in all leads and lifts.

White washing with lime on undecorated walls surface (two coats) to give an even shade including thoroughly brooming the surface dirt dust mortar dirt and other foreign matter in all leads and lifts.

Finishing wall with water proofing cement paint of approved brand & manufacture & of required shade on undecorated wall surfaces (two coats) to give an even shade after thoroughly brushing the surface to remove all dirt & remains of loose powdered materials.

Providing and fixing M.S.fan clamp(Type-I of 16mm dial M.S. Bar bent to shape with hooked ends in RCC. Slab during laying including painting the exposed portion of loop all as per standard design complete.

Providing 40x3mm flat iron hold fast 40cm long including fixing to frame with 10mm dial meters bolts and nuts and wooden plug and embeding in cement mortar block 30x10x15cm (1:3:6(1cement:3sand:6 graded stone aggregate 20mm nominal size.

Providing and fixing following anodized aluminium fittings of anodized transparent and shade with necessary screw etc.complete

(a) Sliding door bolts 250x16mm.

(b-i) M.S. tower bolts (Barrel type) leads and lifts. 200x10mm.

(b-iii) M.S. tower bolts (Barrel type) leads and lifts. 100x10mm.

(c-i) M.S. handles 125mm dia

(c-ii) M.S. handles 75mm dia

Providing and fixing of MS grill in windows and ventilators.

Stone/Boulder filling under floors/behind retaining walls with in all leads and lifts.

Providing under layer for plinth protection of 75mm thick (unconsolidated) bed dry brick/stone aggregate 40mm nominal size will rammed and consolidated /and grouted with fine sand including prperation of ground.

Distempering (two coats) with oil bound washable distemper of approved brand and manufacture and of required shade on undecorated wall surfaces to give an even shade over and including priming caot with distemper primer of approved brand and manufacture after thoroughly brushing the surface free from mortar dropping and other foreign matter and also including preparing the surface even and sand papered smooth primer coat with distemper primer.

Wiring for light point fan point exhaust fan point call bell with 1.5 sq.mm PVC insulated PVC sheathed copper conductor cable in casing and capping as required. Category-C

Supplying and fixing 15/16 Amp. Tumbler piano type switches. The existing switch box/cover including connection etc. as required.

Supplying and fixing 3 pin 15/16 Amp. Socket outlets on the existing switch box/cover including connection etc. as required.

Wiring for circuit / sub-main with following size PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in PVC casing and capping along with 1 No.HRFRLS/PVC insulated single core copper conductor cable of same size for earthing as required.2x2.5 sq.mm

Wiring for circuit / sub-main with following size PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in PVC casing and capping along with 1 No.HRFRLS/PVC insulated single core copper conductor cable of same size for earthing as required.2x4.0 sq.mm

Wiring for circuit / sub-main with following size PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in PVC casing and capping along with 1 No.HRFRLS/PVC insulated single core copper conductor cable of same size for earthing as required.2x6.0 sq.mm

Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet size 200mmx250mmx75mm deep.

Supplying and fixing of following way, single pole and neutral sheet steel MCB distribution board, 240 volts, on surface / recess, complete with tinned copper bus-bar, wire set, neutral link, earth bar, din-bar, detachable gland plate, blanking plate, cable, identification labels interconnections, phosphatized and powder painted, including earthing etc as required single door-6 way.

Supplying and fixing 8 Amp to 63 Amp rating 240 volts (a) series miniature circuit breaker of following poles in the existing MCBDB completed with connections testing and commissioning etc. as required category-A.

Supplying and fixing 40 Amp. To 63 Amp rating volts G-series miniature circuit breaker of following pole in the existing MCBDB complete with connection testing and commissioning etc as required. 40 Amp double pole.

P/F CFP lamps 18 watt

Providing and installed testing commissoining of celling fan of Bajaj/Crompton make complete with regulator , including wiring the down rods of standered length with 16/2.0mm twin twistwd fixing phenolic laminated sheet cover on the fan box etc. Celling fan 1400mm sweep category - A

P/F regulator for celling fan

Providing and Fixing following surface mouting T5 luminaries with powder coated CRCA sheet housing mirror optics reflector electrinic ballast decorative end caps suitable for 28 watt FTL(T5) , complete with all accessories, connection testing and commissioning etc.

1X 28 watt FTL(T5) cat -A

Providing and fixing of street light luminaries of pressure die cast aluminium housing , haet resistance toughened glass IP 66 Proction of category LSTP-72-CDL of Havells/ Crompton make having 72 watt capacity in all leads and lifts and entire satisfaction of the Engineer-in-charge.

Earthing with GI earthing 4.5mtr longx40mm dia including accessories and providing masonry and sure with copper plate having locking arrangement and watering pipe etc. (but without charcoal or coke and Salt) complete as required.

Providing and fixing 6 SWG dia GI wire on surface or incess for loop earthing as required.

Schedule-B4 Construction of JE office cum complaint room and chowkidar quarter.

Excavation in foundation , trecnches etc., in all kinds of soil such as pickwork, jumper work blasting work,kankar moorum,singles including decomposed soft and hard rock,including chiselling wedging clearance of bushes etc.including shoring, dewatering etc. in all leads and lifts stacking the excavated soil not more than 3 meters clear from the edge of excavation and then returning the stacked soil in 15cm layers when required into plinth and sides of foundation etc. consolidating each deposited layers by remming and watering and then disposing of all surplus earth within all leads and lifts complete to the entire satisfaction as directed by the Engineer-in-charge of the site of work.

Providing and laying cement concrete 1:4:8(1cement:4sand:8 graded crushed stone aggregate 40mm nominal size) and curing complete excluding cost of form work in foundation and plinth including carriage of materials in all leads and lifts.

Random rubble masonry /Polygonal rubble masonry (uncoursed brought to courses) with hard stone of approved quality in foundation and plinth i/c levrlling up with cement concrete 1:6:12 ( 1cement :6sand :12 graded stone aggregate 20mm nominal size at plinth level in cement mortar 1:6 (1cement :6 sand) with in all leads and lifts.

Providing and laying cement concrete work 1:1½:3(1cement:1½sand: 3 crushed stone aggregate 20mm nominal size & curing complete excluding the cost of form work and reinforcement for reinforced concrete work in following items including carriage of material in all leads & lifts.

Plinth beam

Lintel beam

suspended floors,roofs,landing shelve and their supports balconies beams,girders bressumers and centilevers upto floor two level

Stair cases (except spiral stair cases) excluding landing but including preparing of the surface and finishing of nosing upto floor two level

Providing form work with steel plates 3.15 mm thick welded with angle iron in frame 30x30x5mm so as to give a fair finish including centring, shuttering, strutting and propping etc. with wooden battens and ballies, height of propping and centring below supporting floor to ceiling not exceeding 4 mtrs. and removal of the same for insitu-reinforced concrete & plain concrete work in following item including carriage of material in all leads & lifts..

Foundation, footings basis of columns etc. and mass concrete.

flat surface such as soffits of suspended floors, roofs, landings and like floors etc. upto 200mm in thickness

Stair cases with sloping or stepped soffits excluding landing.

Edges of slabs and breaks in floors and walls: Under 20 cm. wide.

Providing tor steel reinforcement for RCC work including bending binding and placing in position complete upto floor two level including carriage of material in all leads & lifts

Brick work using common burnt clay building bricks in supper structure above plinth upto floor two level in cement mortar 1:6(1cement:6sand) including carriage of materials in all leads & lifts.

Half brick masonry in common burnt clay building bricks in :Cement Mortar 1:4(1 Cement : 4 Sand) including carriage of materials in all leads & lifts.

Providing wood work of 1st class deodar wood in frames of doors,windows,clerestory,windows and other frames wrought, framed and fixed in position complete including carriage of materials in all leads & lifts.

Providing and fixing panelled glazed or panelled and glazed shutters for doors,windows and clerestory windows i/c bright finished/black enamelled iron butt hings with necessary screws 1st class deodar wood 40mm thick including carriage of material in all leads & lifts.

Providing and fixing wire gauge shutters using galvanised M.S. wire gauge of I.S. gauge designation 85G. with wire of dia 0.56 mm for doors windows and clerestorey windows including bright finished black enamelled iron hinges with necessary screws 1st class deodar wood 40mm thick including carriage of material in all leads & lifts.

Providing 6mm thick cement plaster in ceiling in CM 1:3

15mm cement plaster in single coat on rough side of brick/stone masonry for interior plastering upto floor two level i/c arrises,internal rounded angles,chamfers and/or rounded angles not exceeding 20mm in girth and finished even and smooth cement mortar 1:6 including carriage of material in all leads & lifts.

20mm Cement plaster in single coat on rough side of interior plastering upto floor two level ncluding arrises,internal rounded angles,chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth in cement mortar 1:4 including carriage of material in all leads & lifts.

PROV. & LAYING VITRIFIED TILES 10 mm THICK IN FLOORING (600 x 600x10mm SIZE) TREADS OF STEPS LAID ON A BED OF 12 mm THICK CEMENT MORTOR 1:3 (1CEMENT:3 SAND) FINISHED WITH POINTING IN WHITE CEMENT.

White glazed tiles 6 mm thick in flooring, treads of steps and landing laid on a bed of 12 mm thick cement mortar 1:3(1 cement :3sand) finished with flush pointing in white cement complete in all respect including carriage of material in all leads & lifts.

Providing and fixing 19mm thick water proof commercial board in shelves/box for cup board (Bhuttan make)with butt joints & fixing with nails & screws etc complete in all respect including carriage of material in all leads & lifts.

Providing and fixing 1.00mm thick coloured or plain lamination sheet (sunmica) on oards/ ply wood sheets with approved adhesive and nails etc complete in all respect including carriage of material in all leads & lifts.

Providing and fixing bright finished Aluminium sliding door-bolts with nuts and screws etc. complete in all respect including carriage of material in all leads & lifts.

Providing fixing bright finishedAluminium tower bolts (barrel type) with screws etc. complete. in all respect including carriage of material in all leads & lifts.

Providing and fixing bright finished Aluminium handles for doors with screws etc. complete. in all respect including carriage of material in all leads & lifts

Providing and fixing bright finished hard drawn hooks and eyes complete in all respect including carriage of material in all leads & lifts. 150 mm

Providing and laying cement concrete 1:6:12(1cement:6sand:12 graded crushed stone aggregate 40mm nominal size) and curing complete excluding cost of form work in foundation and plinth ( under Floor) complete in all respect including carriage of materials in all leads and lifts.

Providing and fixing 40x3mm flat iron hold fast 40 cm.long including fixing to frame with 10mm diameter bolts,nuts and wooden plug and embedding in cement concrete block 30x10x15cm of 1:3:6 (1cement:3sand:6graded stone aggregate 20mm nominal size)complete in all respect including carriage of material in all leads and lifts.

Steel work welded in built up sections,trusses and framed work,including cutting ,hoisting,fixing in position and applying a priming coat of red lead paint. In beams joists channels ,angles, tee ,flats with connecting plates or angle cleats as in main and cross beams,hip and jack rafters,purlins connected to common rafters and the like complete in all respect including carriage of material in all leads and lifts.

Providing plinth protection 50mm thick in cement concrete 1:3:6 (1 Cement : 3 Sand : 6 Graded stone aggregated 20mm nominalsize) complete in all respect including carriage of material in all leads and lifts

Boulder filing dry hand packed under floor with in all leads and lifts

Providing and laying cement concrete 1:5;10 (1cement :5sand :10 graded stone aggregate 40mm. nominal size) with 15 % plum and curing complete excluding cost of form work in retaining walls/ Breast walls, the size of plums shall usually be 150mm. to 300mm. as per H.P.P.W.D. Specification complete in all respect including carriage of material in all leads & lifts

Providing and fixing bright finished brass handles for cup board with screws etc. complete. in all respect including carriage of material in all leads & lifts. 150 mm

Constructing Course rubble hammer dressed 'U' shape open surface drain with side wall. 15x22 cm in cement mortar 1:6 (1 Cement : 6 Sand) and inside plastring with cement plaster 1:3 (1 Cement:3 Sand) including earth work and laying 10 cm cement concrete in 1:5:10 (1 Cement : 5 Sand :10 graded stone aggregate) of 40 mm nominal size) and 7.5 cm cement concrete 1:2:4 (1Cement : 2 Sand : 4 Graded stone aggregate of 20 mm nominal size) and finished with a floating coat of neat cement complete as per standard design including carriage of material in all leads & lifts

Applying Birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete in all respect including carriage of material in all leads & lifts

Applying one coat of Acrylic primer (Spectrum or equivalent of Superior quality) on new concrete/ masonry/plastred surfaces after and including preparing the surface by thoroughly brushing the surface free from mortar droppings and other foreign matters, sand papering the surface smooth complete complete in all respect including carriage of material in all leads & lifts

Finishing wall with weather proof exterior grade emulsion of approved design (Apexultima) or its equarlied on undecorated wall surfaces (two coats) to give an even shade and final finish after throughly cleaning the surface to remove all dirt, dust and other foreign matter etc including sand paper smooth complete in all respect including carriage of material in all leads & lifts

Wall painting (two coats) with acrylic emulsion paint of approved brand and manufacture for interior grade on undecorated concrete/stone/plastered wall surfaces to give an even shade including t horoughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth including applying of putty a required for metling the surface complete in all respect including carriage of material in all leads & lifts

Applying one coat for wood preservetive on previously treated wood and wood based surfaces after and including preparing the surface by thoroughly cleaning oil,grease,dirt and other foreign matter,sand papering and knotting complete in all respect including carriage of material in all leads & lifts

Applying priming coat over new wood and wood based surfaces after and including prepering the surface by thoroughly cleaning oil,grease,dirt and other foreign matter) sand papering and knotting.complete including carriage of material in all leads & lifts Readymixed paint brushing with pink for priming

Painting two coats(excluding primimg coat) on new wood and wood based surface with enamel paint to give an even shade including cleaning the surface of dirt,dust and other foreign matter,sand papering & stoping complete in all respect including carriage of material in all leads & lifts other than white enamel paint

Painting two costs (excluding priming coat) on new steel and other metal surfaces eith enamel paint brushin to give an even shade including cleaning the surface of all dirt,dust and other foregin matters complete including carriage of material in all leads & lifts Enamel white paint

ELECTRICAL WIRING

Wiring for light point / fan point / exhaust fan / call bell point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required. Group-C

Wiring for light plug with 2x1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 1 No.1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable for earthing as required.

Supplying & fixing of G.I. modular boxes of following sizes along with modular base and cover plate for modular switches in recess as required:-

4 modules(140mmx78mmx50mm)

6 modules(205mmx78mmx50mm)

8 modules (120mmx135mmx60mm)

12 modules (205mmx135mmx60mm)

Wiring for circuit/sub-main with following size PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 1 No. HRFRLS/PVC insulated single core copper conductor cable of same size for earthing as required.

2x1.5 Sq. mm.

2x2.5 Sq. mm.

2x4.0 Sq. mm.

Wiring for circuit / sub-main with 4x6 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 2 No.6 Sq.mm. (4x6+2x6) HRFRLS/PVC insulated single core copper conductor cable for earthing wire from MCB box to main pannel board.

Supplying and fixing following rating Modular switch /socket in the existing switch box / cover plate including connections etc. as required.

S.P. 5/ 6 Amps one way Modular switch.

5 pin, 5/ 6 Amps Modular socket outlet.

Supplying and fixing following rating Modular switch /socket in the existing switch box / cover plate including connections etc. as required.

S.P. 15/ 16 Amps one way Modular switch

6 pin,15/16 Amps Modular socket outlet.

Supplying and fixing TV. Socket outlet, modular rating switch /socket in the existing switch box / cover plate including connections etc. as required.

Supplying and fixing Telephone socket outlet, modular rating switch /socket in the existing switch box / cover plate including connections etc. as required.

Supplying and fixing ceiling rose on the existing junction box /wooden block including connections etc. as required.

Supplying and fixing of Double door-12 way single pole and neutral sheet steel MCB distribution board, 240 volts, on surface / recess, complete with tinned copper bus- bar, wireset, neutral link, earth bar, din-bar, detachable gland plate, blanking plate, cable, identification labels interconnec- tions, phosphatized and powder painted, including earthing etc. as required.

Supplying and fixing sheet metal bus-bar chamber suitable for 200 Amp. 415 volts capacity with 4 No. copper strip bus-bars each of length 450mm & cross-sectional area(25.4mmx4.75mm), enclosure made from 1.6 mm thick M.S. sheet having overall dimensions (530mmx450mmx 150mm) nominal with all accessories including connections, earthing the body etc. as required.

Supplying and erection of 6 amps. to 32 amps. rating, 10 KA breaking capacity, 240 volts, 'C' curves, miniature circuit breaker of Single pole & neutral. Cat-B in the existing MCB DB complete with connections etc. as required:-

Supplying and erection of 40/50/63 amps rating, 10 KA breaking capacity, 240 volts, 'C' curves, miniature circuit breaker of Double pole. Cat-B in the existing MCB DB complete with connections etc. as required:-

Earthing with copper earth plate 600 mmx600 mmx 3 mm thick, including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. ( but without charcoal or coke and salt ) complete as required.

Extra for using salt and charcoal for G.I. or copper plate earth electrode complete as required.

Providing and laying of one No. aluminium conductor, PVC insulated and PVC sheathed, rmoured/ XLPE power cable, working voltage 1100 volts grade direct in ground; to be laid 1 meter below the ground level including excavation sand cushioning, protective covering and refilling the trench etc. of the Armoured cable 4 sq. mm (twin core) for Yard lights.

Providing and installation of stationary storage type Electric water heater (Geyser) of various sizes by means of Expansion-bolts with nuts and washers, including embedding of expansion-bolts in the wall, providing and fixing of Nonreturn valve, Dead weight safety valve, 2 No C.P. connection rods 18" long, making good the damages, electrical connections, safety valve connections, testing and commissioning etc. 25 Liter capacity water heater (Cat-A)

Providing, Installation, testing and commissioning of ceiling fan with regulator, including wiring the down rods of standard length (up to 30 cm) with 16/0.20 mm twin twisted flexible, cotton braided, copper cable, including providing and fixing phenolic laminated sheet cover on the fan box and earthing etc. Ceiling Fan 1400 mm sweep, Category-A

Providing and installation of Exhaust Fan, Light duty, (Domestic) 225 mm sweep in the existing opening, including taking the hole to suit the size of the above fan, making good the damages, connections, testing and commissioning etc.

Providing and fixing 2 x36 watt-CFL (Category-A) of surface mounting decorative mirror optics luminaire with powder coated CRCA sheet steel housing, low glare aluminium mirror reflector, prewired with 110 V starter & 36/40 w copper ballast for housing CFL (but excluding the cost of CFL), complete with all accessories, connections, testing and commissioning etc. as required.

Supplying and fixing of fancy wall bracket containing thread type CFL lamp holder (s) of all sizes and shapes, complete with all accessories but excluding CFL lamp including making connections, testing etc. as required. Fixed type wall bracket 150 dia, single lamp.(Category-A)

Providing, Installation, testing and commissioning of prewired flourecent tube fitting 1x40 watt coplete in all respect.

Supplying and fixing Ding-Dong / Electronic musical bell, suitable for D.C./A.C. single phase,230 volts complete as required

Supplying and fixing CFL 11 watt suitable for D.C./A.C. single phase,230 volts complete as required

Supplying and drawing co-axial TV cable,RG-6 grade,0.7mm (75 Ohms) copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface / recessed, steel / PVC conduit as required.

WATER SUPPLY AND SANITARY

Providing and fixing high pressure spigot and socket waste ventilating pipe of following daimeter i/c entire carriage of material within all leads and lifts.

75mm dia

110mm dia

Providing and fixing PVC plain bend of following diameter i/c entire carriage of material within all leads and lifts.

75mm dia

110mm dia

Providing and fixing PVC door bend of following diameter i/c entire carriage of material within all leads and lifts.

75mm dia

100mm dia

Providing and fixing PVC collar/ socket of following diameter i/c entire carriage of material within all leads and lifts.

75mm dia

100mm dia

Providing and fixing PVC Single equal brach of following diameter i/c entire carriage of material within all leads and lifts.

75mm dia

100mm dia

Providing and fixing PVC Floor traps 110x75mm i/c entire carriage of material within all leads and lifts.

Providing and fixing viterous China wash down water closet (European Type WC pan) with intergral “P”or”S” trap including jointing the trap with soil pipe in cement mortar 1:1 (1cement: 1 sand) including entire carriage of material within all leads and lifts.

Two piece WC for other toilet cera make CRUSE

P/F 10 litres vitrous china low level flushing cistern with a pair of CI or mild steel brackets, comp. with fitting such as lead valve less syphon 15mm normal size brass ball valve with polythene float CP brass handle union & couplings for connections with inlet, outlet & overflow pipe 40mm dia CP flush beng i/c cutting holes in walls & making good the same & connecting the flush bend with cistern & closet (over flow pipe to be measured & paid for separately).

Two piece WC for other toilet cera make CRUSE

Providing and fixing Plastic seat cover i/c entire carriage of material within all leads and lifts.

Two piece WC for other toilet cera make CRUSE

Providing and fixing vitreous china wash basin with single hole for pillar tap with CI or MS brackets painted white i/c cutting holes & making good the same but excluding fitting i/c entire carriage of material within all leads and lifts. Cera make Concord, 630x450mm size.

Providing and fixing vitreous china pedestal for wash basin complete recessed at the back for the reception of pipes and fitting i/c entire carriage of material within all leads and lifts.

Providing and fixing of MI union for wash basin 32mm dia i/c carriage of material within all leads and lifts.

Providing and fixing 32mm dia PVC waste pipes for wash basin i/c brass check nut i/c entire carriage of material within all leads and lifts.

Providing and fixing 600mm x 450mm bevelled edge mirror of superior glass mounted on 6mm thick A.C. sheet or ply wood sheet and fixed to wooden plugs with C.P. brass screws and washer including carriage of materials within all leads and lifts.

Providing and fixing C.P. brass towel rail complete with C.P.brass brackets fixed to wooden plugs with C.P. brass screws including carriage of materials within all leads and lifts 600 x 20mm.

Providing and fixing 600x120mm glass shelf i/c entire carriage of material within all leads and lifts.

Providing and fixing CP brass soap dish i/c entire carriage of material within all leads and lifts.

Providing and fixing CP brass shower 100mm dia i/c entire carriage of material within all leads and lifts.

Providing and fixing brass bib tap long nose 15 mm dia (Heavy duty) i/c entire carriage of material within all leads and lifts.

Providing and fixing brass bib tap short body 15 mm dia (Heavy duty) i/c entire carriage of material within all leads and lifts.

Providing and fixing brass angle valve 15 mm dia without nut and pipe i/c entire carriage of material within all leads and lifts.

Providing and fixing CP concealed stop cock 15 mm dia without nut and pipe i/c entire carriage of material within all leads and lifts.

Providing and fixing single hole single lever wash basin mixture i/c entire carriage of material within all leads and lifts.

Providing and fixing PVC connection 15mm dia i/c entire carriage of material within all leads and lifts.

Providing and fixing 100mm dia, C.P. brass grating including carriage of material within all leads and lifts.

Providing and fixing Jet connection fixed for WC seat i/c entire carriage of material within all leads and lifts.

Providing and fixing CP towel ring i/c entire carriage of material within all leads and lifts.

Providing and fixing wall to ceiling and floor galvanised mild steel tubes light grade), tube fittings and clamps i/c making good wall ceiling & floor of following diameter i/c entire carriage of material within all leads and lifts

15mm dia

Providing & fixing Brass full way wheel valve i/c entire carriage of material within all leads & lifts

15mm dia

Providing and fixing 60x45x25cms size single bowl of approved make stainless steel kitchen sink i/c entire carriage of material within all leads and lifts

Providing and fixing 1000 ltrs. Double layer sintex make water storage reservoir with top lid and making connection complete in all respect including all leads and lefts.

Constructing manhole with RCC top slab in 1:2:4 mix ( 1 cement :2 sand:4 graded stone aggregate 20 mm nominal size) foundation concrete 1:4:8 ( 1cement:4sand :8graded stone aggregate 20 mm nominal size),inside plastering 15 mm thick with cement mortor 1:3 (1cement:3sand),finished with a floating coat of neat cement & making channels in cement concrete 1:2:4 (1cement:2 sand:4 graded stone aggregate 20mm nominal size) finished smooth complete i/c curing &testing. (i) inside size 1200 x 900 x 1000 mm deep i/c c.i. cover with frame (m. duty) with single pattern 455 x 610 mm internal dimensions (total wt.of cover & frame to be not less than 38 kg) 23 cms. thick brick masonry walls using 2nd class brick in cm 1:3 (icement : 3 sand)

Schedule-B5 Construction of RCC dyke.

Excavation in foundation, trenches ,etc in earth work,lift upto 1.50 metres stacking the excavated soil not more than 3 metres clear from the edge of excavation and then returning the stacked soil in 15 cm. layers,when required into plinths sides of foundation etc.consolidating each depoisted layer by ramming and watering and then disposing of all surplus excavated earth as directed with in all leads & lifts complete in all respect as per entire satisfaction of Fngineer in charge.

Taking earth work @ 80% with dewatering of total qty.of excavated earth pick work / jumper work ( 50 % pick work & 50 % jumper work)

Taking earth work @ 20% without dewatering of total qty.of excavated earth in Chieseling in hard rock.

Providing & laying cement concrete using Conrete mix of M -10 graded stone aggregate 40mm nominal size & curing complete excluding cost of form work and reinforcement for reinforced concrete work in foundation & plinth

Providing form work with steel plates 3.15 mm thick welded with angle iron in frame 30x30x5 mm so as to give a fair finish including centering,shutering,strutting,and propping etc. with wooden battens and ballies height of propping and centering below supporting floor to ceilinf not exceeding 4 mtrs. And removal of the same for in-situ-reinforced concrete & plain concrete work in :

Foundation footings bases of columns etc. and mass concrete including plinth beams and columns upto P.L.

Vertical surfaces such as wall (any thick.) partitions & the like i/c attached pillasters, buttresses,plinth & string courses & the like.

Providing & laying cement concrete using Conrete mix of M -20 graded stone aggregate 20mm nominal size & curing complete excluding cost of form work and reinforcement for reinforced concrete work :

In foundation and footing,bases of columns, and the like mass concrete.

Wall (any thickness but not less than 0.10 mts.Thickness) attached pillasters, buttresses plinth & string courses etc.from top of found. level upto floor two level

Providing mild/tor steel reinforcement for R.C.C work including bending,binding and placing in position complete upto floor two level

Hiring of earth cutting / excavating machineries to be deployed for earth cutting excavating or filling making diversions bandh and channel wherever erquired including cost of fuel oil lubricants and wages of operational staff any repair , breakage during operation will be carried out by the owner at his own risk and cost including shifting of machinery one place to another place at required location.Actual working hours will be accounted for the payment and six hour working per day will required average minimum 20 cum excavation in all kinds of soil including loading in toppers, trucks and disposal of excavated earth within in all leads & lifts will have to be ensured in one hour working.: Excavator cum Loader D 76

Schedule-B6 Miscelleneous.(Barbed wire fencing, fencing pannel and wire crate)

Exacavation in foundation trenches etc. in earth work lift up to 1.5 mtrs stacking the excavated soil with in all leads and lifts clear from the edge of excavation and then returning the stacked soil in 15 cm layers when required in to plinth side of foundation etc.consolidating each deposited layerby ramming and watering and then disposing of all surplus excavated earth as direcred by the Engineer In charage. PJW

Providing and laying cement concrete 1:4:8(1cement:4sand:8 graded crushed stone aggregate 40mm nominal size) and curing complete excluding cost of form work in foundation and plinth including carriage of materials in all leads and lifts.

Providing and laying cement concrete 1:6:12(1 cement: 6 sand : 12 graded stone aggregate 40 mm nominal size) excluding the cost of centring & shuttering in foundation and plinth and curing complete with in all leads and lifts and to the entire satisfaction of the engineer- in - charge

Steel work welded in built up section, trusses and framed work including cutting, hoisting & fixing in position and applying a priming coat of red lead paint in grating framed guard bars, ladders, railing brackets & similar work complete in all respect and entire satisfaction of Engineer- in- charge.

Supply and fixing galvanised steel barbed wire IS: 278-1962 type-I weighing 9.38 Kg per 100 mtr ( minimum ) straining and fixing to any type of standard rails, straining bolts including securing with and provision of galvanised mild steel wire, staples or steel pins etc as directed ( posts and struts of steel and straining bolts shall be paid for separately)

Wire crate made of GI wire filled with boulders with square cut faces against the wire (Boulder filling to be measured and paid for separately) GI wire 5 mm thick corresponding to SWG-6, 15x15 cm mesh.

Wire crate made of GI wire filled with boulders with square cut faces against the wire (wire crates to be measured and paid for separately) as per the direction of the Engineer- in-charge.

Random rubble masonry / Polygonal rubble masonry (coursed or brought to courses with hard stone of approved quality in foundation and plinth including leveling up with cement concrete 1:6:12 in cement mortar 1:6 (1 cement : 6 sand) in all leads and lifts in foundation and plinth.

Prov.and laying CC 1:2 :4 ( 1cement:2 sand: 4graded stone aggregate 20 mm nominal size )and curing complete excluding the cost of form work and reinforcement for reinforced concrete work in foundation and pillars etc.

Prov. form work form work with steel plates 3.15mm thick welded with angle iron in frame 30x30x5mm so as to give a fair finish including centering ,shuttering, propping etc. height of propping and centering below supporting floor to ceiling not exceeding 4 meters and removal of the same for-in-situ reinforced concrete and plaiin concrete work in:-

i) Vertical surface such as walls (any thickness) partitions & the like i/c attached pill., butteresses, plinth and string courses & the like plain wall.

ii) Flat surfaces.

iii) Edges of slab.

Providing tor steel reinforcement for RCC work including bending, binding and placing in position complete up to floor two level.

Fixing of fencing panels of Size 2.40 mtr x 1.20 mtr devided in Two Panels of 1.20 m X 1.20 M by fixing T iron at centre fitted with wire mesh 25 m.m x25mm welded to MS angle frame all around with MS flat cover and seven Nos. hold fasts including cutting welding painting with red oxide paint complete in all respect.

Schedule-B7 construction of approch road to WTP

Execavation in soil in filling area by mechnical means including cutting and trimming of side slopes and disposing of execavated earth with a lift up to 1.50 mtrs and and complete in all respect with in all leads and lifts.

Preparation of sub-grade by dressing to camber (Earth work for the cutting involved for sub-grade to be measured and paid for separately) depending upon the classification of soil complete as per HP.PWD, Specification including carriage of material with in all leads and lifts and other incidental as per the direction of Engineer-in Charge.The rates includes octroi, royality Malkhana , Toll tax , Sale tax or other taxes imposed by the Government.

Consolidation of sub-grade with road roller including making good the undulation etcetera with earth or quarry soil etcetera and re-rolling the sub-grade completed as per HP.PWD., specification ,including carriage of material with in all leads and lifts and other incidental as per the direction of Engineer-in Charge.The rates includes octroi, royality Malkhana , Toll tax , Sale tax or other taxes imposed by the Government.

Providing laying , spreading and compacting stone aggregates of broken crushed of specific sizes 90 mm to 45mm(Ninety millimetre to forty five millimetre ) by manual means Grading-I 100mm (One hundred millimetre) consolidated thick water bound macadam specifiction including spreading in uniform thickness using template , hand packing, rolling with three wheel 80-100 KN static roller in stages to proper grade and camber, applying and brooming , graded crushed stone screening type -A of size , 13.2 mm (Thirteen point two millimetre) nominal size at the rate of 0.27 cubic metre (Zero point twenty Seven cubic metre ) per 10 square metre (Ten square metre ) 0.08 cum.(Zero point zero eight cubic metre per ten square metre to fill up the interstices of course aggregate watering and compacting to the required density of grading -1 as per Technical Specifications 2014Clause 405 ,including carriage of materials within all leads and lifts and other incidentals..The rate includes octroi, royality Malkana toll tax , sale tax or other taxes imposed by the Government.

Providing laying , spreading and compacting crushed stone aggregates of specific sizes 63 mm to 45mm(Sixty three millimetre to forty five millimetre ) by Mechanical means Grading-II ,75 mm (Seventy five millimetre) consolidated thick water bound macadam specification including spreading in uniform thickness using template , hand packing, rolling with three wheel 80-100 KN static roller in stages to proper grade and camber, applying and brooming , graded crushed stone screening type -B of size , 11.2 mm (Eleven point two millimetre) nominal size at the rate of 0.20 cubic metre (Zero point twenty cubic metre ) per 10 square metre (Ten square metre ) and binding material @ 0.06cum. (Zero point zero six cubic metre Per 10 (Ten)square metre to fill up the interstices of course aggregate watering and compacting to the required density of Grading-2 as per Technical Specification ,2014 clause 405,,including carriage of materials within all leads and lifts and other incidentals..The rate includes octroi, royality Malkana toll tax , sale tax or other taxes imposed by the Government.

preparation and surface treatent of formation by ramming mud and slurry watering to the extent needed as the make in design moisture content trimming to the required level grade perform and rolling with three wheel 80/100 mt static roller complete.

Providing and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70-1.00 kg ( Zero point seven - One Kilogram) per square metre using mechanical means as per MORD 2014 Technical Specification 2014 Clause 502 including carriage of materials , machinery toolsa and plants within all leads and lifts and other incidentals as per direction of Engineer-in-Charge. The rate includes octori, royality, malkhana, toll tax, goods and services tax or other tax imposed by the government.

Providing and laying spreding & rolling of open graded premix carpet of 20 mm (Twenty milimeter) thickness composed of 13.2 mm to 5.6 mm (Thirteen point two to Five point six milimeter) crushed stone aggregates as per MORD Technical specification 2014 table 500.9 using CRRI.BITCHEM of 2.0 to 2.30 kg (Two point zero to two point thirty kilogram) per sqm bitumen amulson of medium setting (MS) grade as per MORD Technical Specification 2014 clause 506.2.2.1, to required line grade and level to serve as wearing course on a previously prepared surface as per clause 503. including prepration of binder as per MORD Technical specification 2014 clause 506.2.4.2, mixing in a suitable cold mixplant or concrete mixture as per MORD clause 506.2.4.6, rolling with a smooth wheel tandem roller of 80 to 100 KN static weight and wheel should be free from any fuel/ lubricanting oil finished to required level and grades, to be followed by seal coat of type-B As direction by Engineer-in-Charge. including carriage of materials , machinery tools etc within all leads and lifts and other incidentals. The rate includes octori, royality, malkhana, toll tax, goods and services tax or other tax imposed by the government.

Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type B as per Technical Specification Clause 510. By manual means including carriage of materials , within all leads and lifts as per direction of Engineer-in-Charge. The rate includes, octroi, Malkhana , Toll tax , Goods Service Tax, building and other constrcution worker, welfare cess royalty or any other tax, leavy or cess in respect of input for or output by this contract shall be payable by the contractor and Government shall not entertain any claim whatsoever in this respect of the same.

Sanjeev Kumar

Dogra Construction Company Pvt Ltd