Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.2 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | L2₹1.2 L+₹12,248 (10.2%)Accepted-AOC | L2 | Accepted-AOC L2 |
| Sl No | Description | Qty | Unit | BINU.K.GEORGE L1 | Binu K Varghese L2 |
|---|---|---|---|---|---|
| 1.00Ground | |||||
| 1.00 | 10.25.2:Item Shifted to Sub head 14 as item 14.73
Item Shifted to head 14 as item 14.74
Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works | 162.4 | kg | 178.42 ₹28,975.41 Lowest | 200 ₹32,480 |
| 1.00 | 4.1.8:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) | 0.02 | cum | 7,932.89 ₹150.72 Lowest | 8,000 ₹152 |
| 1.00 | 50.6.2.1:Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x15 cm or nearest available size confirming to IS 2185 part I of 1979 for foundation and plinth with thickness 15cm in: CM 1:6 ( 1 cement :6 coarse sand) etc complete | 0.23 | cum | 6,831.14 ₹1,537.01 Lowest | 7,000 ₹1,575 |
| 1.00 | 13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand) | 1.5 | sqm | 369.76 ₹554.64 Lowest | 400 ₹600 |
| 1.00 | OD125992/2025-2026:Supplying and fixing in place granite name board of slab area less than 0.9 sq.m including engraving and painting letters etc. complete as per direction of Engineer in charge at site. | 0.68 | sqm | 10,432.41 ₹7,041.88 Lowest | 11,000 ₹7,425 |
| 1.01 | OD125999/2025-2026:Providing and fixing pre coated galvanized iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.35 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side. of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during
transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | 3.91 | sqm | 621.1 ₹2,428.5 Lowest | 700 ₹2,737 |
| 1.01 | OD125491/2025-2026:Supplying and fitting Stainless Steel (grade 304) 3D Lettering MALAYALAM of size 25-30cm, 30mm projection etc complete as per direction of Engineer incharge at site | 66 | each | 1,102.23 ₹72,747.18 Lowest | 1,200 ₹79,200 |
| 1.01 | 13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work | 13.28 | sqm | 164.86 ₹2,189.67 Lowest | 200 ₹2,656.4 |
| 1.01 | 4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | 0.1 | cum | 9,235.97 ₹895.89 Lowest | 9,600 ₹931.2 |
Tender Value
₹1.2 L
EMD Value
₹3,014
Closing Date
1 Sept 2025, 10:30 amClosed
ASSISTANT EXECUTIVE ENGINEER
LSGD SUB DIVISION KOTHAMANGALAM
KMBP 2025-26 235/26- Installation of Kurumbinampara ground name board and related activities -General Civil
2025_LSGD_788362_1
KMBP 235/26
Open Tender
Civil Works - Others
Item Rate
KOTHAMANGALAM
Please refer Tender documents.
6 documents required · 6 mandatory
₹555
₹3,014
21 Oct 2025
20 Aug 2025
2 Sept 2025
20 Aug 2025
1 Sept 2025
20 Aug 2025
Amount
Ground
10.25.2:Item Shifted to Sub head 14 as item 14.73 Item Shifted to head 14 as item 14.74 Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works
4.1.8:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)
50.6.2.1:Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x15 cm or nearest available size confirming to IS 2185 part I of 1979 for foundation and plinth with thickness 15cm in: CM 1:6 ( 1 cement :6 coarse sand) etc complete
13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)
OD125992/2025-2026:Supplying and fixing in place granite name board of slab area less than 0.9 sq.m including engraving and painting letters etc. complete as per direction of Engineer in charge at site.
OD125999/2025-2026:Providing and fixing pre coated galvanized iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.35 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side. of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
OD125491/2025-2026:Supplying and fitting Stainless Steel (grade 304) 3D Lettering MALAYALAM of size 25-30cm, 30mm projection etc complete as per direction of Engineer incharge at site
13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work
4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)
OD126236/2025-2026:Providing and fixing of Nylon safety net (Garware or equivalent) with 2.mm thick wire and 50mm spacing. The net should be binded with 2.mm. nylon Wire at equal distances on the steel frames including all cost, labour, scaffolding charges etc complete and as per direction of Engineer-in-charge
Binu K Varghese (BID ID -2319536)
Bidder Name
Binu K Varghese
BINU.K.GEORGE
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.PDF
finance_1297921.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .