Construction Of New Taluka Court Building At.Malpur, Dist.Aravalli.

Name of Work : Construction of new taluka curt building at Malpur, Dist.: Aravalli.

BILL OF QUANTITIES

Item Description of Item (with brief specification and reference to book of Quantity Unit Rate in Total

No. specifications) Figures Amount

1 Excavation for foundation upto 1.5 m depth including sorting out and 3040.000 Cu.Mt. 122.99

stacking of useful materials and disposing off the excavated stuff upto

50 Meter lead.(A) Loose or soft soil

2 Excavation for foundation for depth from 1.5 m to 3.0 m including 1416.000 Cu.Mt. 170.40

sorting out and stacking of useful materials and disposing off the

excavated stuff upto 50 Meter lead.(B) Dense or Hard soil

3 Filling in foundation and plinth with sand in layers of 20 cm. Thickness 305.000 Cu.Mt. 481.80

including watering ramming and consolidating etc. comp.

4 Filling available excavated Earth (Excluding Rock) in trench plinth side of 1702.000 Cu.Mt. 136.92

foundation . in layer not excluding 20 cm in depth consolidation each

deposited layer by ramming and watering etc. complete

5 Filling foundation and plinth with murrum or selected soil in layer of 20 1822.000 Cu.Mt. 294.38

cm in thickness including ramming watering and consolidating etc.

Item Description of Item (with brief specification and reference to book of Quantity Unit Rate in Total

No. specifications) Figures Amount

6 Anti Termite System 1445.000 Sq.Mt. 134.33

P/L of Permenent piping technology Anti Termite treatment before

flooring work by installing LLDP (Low linear density Polyethylene) tube

of 8 mm O.D.& 6.4 mm I.D.With in Built Pressure Compenstaion chif

every 30 cm interval in the tube, having working pressure of 2 kg/cm

and realese rate of 1.9 ltr/Hour fixed by P-Clip and nails . The LLDP pipe

shall be installed at the entire periphery of the building and at internal

network of building depth of 20 to 200 mm under floor every 2 to

mtr.c/c distance (adjustble as per building layout ) & Ends of loop pass

through a PVC Elbow of minmum 32 mm ID at junction box of wall and

floor level, entring into a steel reinforcmed grooved flexible pipe

mini.22 mm LD leading into junction box and during injecting chemicls

for termite control tretment. The anti-termite chemical Lmidcloprid

30.5% SC Mix as per IS 6313(part-III) shall be injected by the pressure

pump diluted with water @ 10.5 ml/5ltr of water at the rate of

kg/sq,cm.@ 5 ltr /Smt .the contractor shall submit approved line plan

for piping system and junction boxes dully approved By Engineer -in-

charge with bond of 5 Years warnty .

7 Providing and laying controlled cement concrete M.150 and curing 677.000 Cu.Mt. 3975.77

complete including the cost of formwork and excluding reinforcement

for reinforced concrete work in (A) Foundations and plinth pcc

8 Providing and laying controlled cement concrete M.250 and curing 1513.000 Cu.Mt. 4688.42

complete including the cost of formwork and excluding reinforcement

for reinforced concrete work in (A) Foundations, footings, and Mass

concrete. footing

Item Description of Item (with brief specification and reference to book of Quantity Unit Rate in Total

No. specifications) Figures Amount

9 Providing and laying controlled cement concrete M-250 and curing 64.000 Cu.Mt. 7679.03

complete including the cost of form work but excluding the cost of

reinforcement for reinforced concrete work in (d) columns Up to

10 Providing and laying cement concrete 1:3:6 (1-Cement : 3- coarse sand : 144.750 Cu.Mt. 3095.25

6- machine cut stone aggregates 40 mm nominal size) and curing

complete excluding cost of formwork in (A) Foundation and Plinth

11 Providing and laying controlled cement concrete M-200 and curing 226.030 Cu.Mt. 7648.09

complete including the cost of form work but excluding the cost of

reinforcement for reinforced concrete work in Columns, pillars posts

and struts All FLOOR

12 Providing and laying controlled cement concrete M-250 and curing 214.000 Cu.Mt. 6074.14

complete including the cost of form work but excluding the cost of

reinforcement for reinforced concrete work in Ground & Plinth BEAMS

13 Providing and laying controlled cement concrete M.150 and curing 190.000 Cu.Mt. 5321.69

complete including the cost of formwork and excluding reinforcement

for reinforced concrete work in (C) Plinth Slabs

14 Providing and laying controlled cement concrete M.200 and curing 384.890 Cu.Mt. 6552.92

complete including the cost of formwork and excluding reinforcement

for reinforced concrete work in (C) All floor Beams,

15 Providing and laying controlled cement concrete M-200 and curing etc. 38.970 Cu.Mt. 6760.73

complete including the cost of form work and reinforcement for

reinforced concrete work in (c) Chhajja for All floor

16 Providing and laying controlled cement concrete M-200 and curing etc. 31.260 Cu.Mt. 6985.34

complete including the cost of form work and reinforcement for

reinforced concrete work in (c) Lintal for All floor

Item Description of Item (with brief specification and reference to book of Quantity Unit Rate in Total

No. specifications) Figures Amount

17 Providing and laying controlled cement concrete M.200 and curing 411.450 Cu.Mt. 6710.25

complete including the cost of formwork and excluding reinforcement

for reinforced concrete work in (C) All floor Slab

18 Providing and laying controlled cement concrete M-200 and curing etc. 26.650 Cu.Mt. 7244.87

complete including the cost of form work and excluding the cost of

reinforcement etc. complete in (E) Stair case for Ground Floor to Third

19 Providing and laying controlled cement concrete M.250 and curing 5.000 Cu.Mt. 5859.01

complete excluding the cost of formwork and reinforcement for

reinforced concrete work in (B) Walls, from top of foundation level upto

floor two level

20 Providing and laying controlled cement concrete M-200 and curing etc. 50.870 Cu.Mt. 6063.84

complete including the cost of form work and excluding the cost of

reinforcement etc. complete in RCC Vertical and horizontal wall for All

21 Providing and fixing 90 cm high Stainless steel railing made from 134.000 Rmt. 3603.68

anticorrocive 304 grade S S pipe of 50 mm dia (16Gauge) as hand rail

with S S 304 grade Baluster of 38 mm dia (16Gauge) as a vertical

support fixed in RCC slab at 1.2m c/c including three horizontal S S

pipes of 25 mm dia (16Gauge) at eqal distance fixed by 18.75 mm dia

(16Gauge) S S pipe with baluster including accessories as per detailed

drawing as directed etc. complete.

22 Providing, and fixing S.S Rod (304 grade) of 25 mm dia of required length and 12.000 Rmt. 666.60

intermediate S.S brackets of required size and S.S socket of best Quality,ring with S.S.

coating , eyelet belt. Fixing shall be with all fittings & perfect operated work etc.

23 Providing IS Mark TMT FE 500D bar reinforcement for RCC work 316480.000 Kg. 77.87

including bending & placing in position complete up to All floor Level

Item Description of Item (with brief specification and reference to book of Quantity Unit Rate in Total

No. specifications) Figures Amount

24 Providing and fixing eco-friendly light weight calcium silicate false ceiling 272.000 Sq.Mt. 1674.15

tiles having Tegular edge & 15 mm Thick Densified edges on the Tile

Periphery for Extra Strength The Light weight calcium silicate ceiling tiles

shall have, light reflection 85% non-combustible as per B.S. 476 part IV,

100% humidity resistance and also having thermal conductivity0.043°

w/m KC.for the best thermal Insulation. The Light weight calcium Silicate

tile shall be of approved texture Fine fissured/ Spintone/ Cosmos having

NRC value of 0.5 & Globe having NRC value of 0.75 NRC or equivalent of

size 595 X 595 mm to be laid on true horizontal level suspended inter

locking metal grid of hot dipped galvanized steel sections (galvanizing

@120 grams per sqm including both side) consisting of main ‘T’ runner

suitably spaced at joints to get required length and size of 24 X 38mm

made from 0.30 mm thick (minimum) sheet, 1200mm centre to centre,

and cross ‘T’ of size 24 X 28mm made out of 0.33mm (Minimum) sheet

spaced 1200mm along spaced between main 'T' at 600mm centre to

centre to form agrid of 1200x600mm and size 24x48mm made of

0.30mm thick (Minimum) sheet to be interlocked at middle of the

1200x600mm panel to form grid of size 600x600mm resting on

periphery walls/partitions on a perimeter wall angle pre-coated steel of

size (24x24x3000mm made of 0.40mm thick (minimum) sheet with the

help of rawl plugs at 450mm centre to centre with 25mm long dry wall

screws @ 230mm interval and laying 15mm thick densified edges light

weight calcium silicate ceiling tiles of approved texture (Fine

fissured/Cosmos/Spintone) in the grid including cutting/making opening

for services like diffusers, grills, light fittings, fixtures, smoke dtectors

etc., wheneveer required, Main 'T' runners to be suspended from ceiling

25 Brick work using common burnt clay building bricks having crushing 209.000 Cu.Mt. 4214.33

strength not less than 35 kg/sq.cm. in foundation and plinth in cement

mortar 1:6 (1 cement : 6 fine sand) Conventional

Item Description of Item (with brief specification and reference to book of Quantity Unit Rate in Total

No. specifications) Figures Amount

26 Brick work using common burnt clay building bricks having crushing 894.600 Cu.Mt. 4511.87

strength not less than 35 Kg/Sq.cm. in super structure above plinth level

upto floor two level in cement mortar 1:6 (1cement : 6 fine sand)

Conventional All Floor

27 Half brick masonry in common brunt clay building bricks having crushing 1594.440 Sq.Mt. 684.96

strength not less than 35 Kg/Sq.Cm. in n super structure. (B)

Conventional for All Floor.

28 Providing 20 mm thick double coat mala cement plaster with 1x1cm 7519.640 Sq.Mt. 290.64

grooves on interior brick / concrete work for plastering comprising of

base coat of 12 mm thick cement plaster in cement mortar (1 Cement :

4 coarse sand) in rough finishing and 8 mm thick top coat of cement

mortar 1:2 (1 Cement : 2 Coarse sand) finished with trovel including

scaffolding curing etc. complete. For All Floor

29 Providing 10 mm. Thick Mala trovel plaster in single coat for plastering 2854.440 Sq.Mt. 181.88

on ceiling and soffits of stairs and finished With 1x1 CM Grooves at

juction of structual member in : (I) Cement mortar 1:4 (1 cement :

sand) with Mala finished of neat cement slurry etc. complete. All Floor

30 20 mm Thick Double coat sand faced Gutka cement plaster on walls 6497.000 Sq.Mt. 321.10

upto height 10 meters above ground level consisting of 12 mm Thick

backing coat of c.m. 1:3 (1 cement : 3 sand) and 8 mm Thick finishing

coat of c.m. 1:1 (1 cement : 1 sand) with 1x1cm Groves at juction of

structure member etc. comp.etc. complete.

31 Providing throating or plaster drip and moulding to R.C.C. Chhajja. 720.000 Rmt. 43.08

32 Applying two coats of lapy (putty) & two coats of primer of approved 10212.000 Sq.Mt. 40.59

brand and manufacture on new wall surface to give an even shade

including thoroughly brushing the surface free from mortar dropping

and other foreign matter and sand papered smooth.

Item Description of Item (with brief specification and reference to book of Quantity Unit Rate in Total

No. specifications) Figures Amount

33 Wall painting (two coats) with plastic emulsion paint of approved brand 7365.000 Sq.Mt. 82.97

and manufacture on undecorated wall surface to give an even shade

including throughly brushing the surface free from mortar droppings

and other foreign matter and sand papered smooth.

34 Painting (two coats) with plastic emulsion paint of approved brand and 2847.000 Sq.Mt. 88.47

manufacture on undecorated ceiling surface to give an even shade

including throughly brushing the surface free from mortar droppings

and other foreign matter and sand papered smooth.

35 Finishing wall with weather proof exterior acraylic emulsion paint on 6472.000 Sq.Mt. 73.75

wall surface (two coats) to give an required shape even shade after

thoroughly brushing the surface to remove all dirt, and remains of loose

powdered materials.etc complete

36 Providing And filling with good quality cinder(steam coal) as directed by 118.000 Cu.Mt. 476.72

engineer in charge in sunks in layers of 15 cm thick,including

watering,placing ,ramming well etc as directed, for all floor.

37 Providing and laying controlled cement concrete M-200 for RCC work 35.260 Cu.Mt. 5897.74

and curing complete including the cost of form work but excluding the

cost of reinforced concrete work in coping on All Floor

Item Description of Item (with brief specification and reference to book of Quantity Unit Rate in Total

No. specifications) Figures Amount

38 Providing and fixing three track and fixed window having extruded 16.000 Sq.Mt. 1575.50

aluminum Colour anodized section frame main outer size 95mm x

24mm x 1.17mm @ wt.of 0.738 Kg/mt, horizontal Three track member

size 92mm x 31.75mm x 1.30mm @ Wt.1.07 Kg/mt, vertical member of

size 92mm x 31.75mm x 1.50mm @ Wt. 1.06 Kg/mt with sliding shutters

of horizontal member size 40 mmx18mm x1.29mm @ wt.of

Kg/mt, vertical member of size 40mm x 18mm x 1.29 mm @ wt.of

0.456Kg/mt/ with 5 mm thick transparent bronze colour tinted float

glass including fix window having standared extruded of alluminium

section of size 63.50 x 38.10 x 1.95 mm @ Wt 1.094Kg / Rmt with colour

anodized alluminium frame with 5 mm thick transparent bronze colour

tinted float glass with powder coated aluminum fittings and fixtures and

transparent silicon sealant glass fixing to frame as per details etc

39 Providing and fixing window having extruded aluminum Colour 32.500 Sq.Mt. 1583.95

anodized section frame main outer size 95mm x 24mm x 1.17mm@

wt.of 0.738 Kg/mt, horizontal Three track member size 92mm x

31.75mm x 1.30mm @ Wt.1.07 Kg/mt, vertical member of size 92mm x

31.75mm x 1.50mm @ Wt. 1.06 Kg/mt with sliding shutters of

horizontal member size 40 mmx18mm x1.29mm @ wt.of 0.456 Kg/mt,

vertical member of size 40mm x 18mm x 1.29 mm @ wt.of 0.456Kg/mt/

with 5 mm thick transparent bronze colour tinted float glass with

powder coated aluminum fittings and fixtures and transparent silicon

sealant glass fixing to frame as per details etc

Item Description of Item (with brief specification and reference to book of Quantity Unit Rate in Total

No. specifications) Figures Amount

40 Providing and fixing window having extruded aluminum Colour 212.000 Sq.Mt. 1713.70

anodized section frame main outer size 63.50 x 38.10 x 1.95 mm @ Wt

1.094 Kg / Rmt, horizontal two track member size 61.85 mm x 31.75 mm

x 1.20mm @ wt.of 0.695 Kg/mt, vertical member of size 61.85 mm x

31.75mm x 1.30 mm @ wt.of 0.0.659 Kg/mt with sliding shutters of

horizontal member size 40mm x 18mm x 1.29mm @ wt.of 0.456Kg/mt,

vertical member of size 40mm x 18mm x 1.29mm @ wt.of 0.456Kg/mt/

@ Wt. 0.457 Kg/mt with 5 mm thick transparent bronze colour tinted

float glass with powder coated aluminum fittings and fixtures and

transparent silicon sealant glass fixing to frame as per details etc

complete for window.

41 Providing & Fixing in position standard extruded approved colour 13.000 Sq.Mt. 2098.68

anodised Aluminum Ventilator with outer frame 63.50 x 38.10 x

mm@ Wt 1.094 kg/Rmt with 3mm thick Bajari figure adgesteble tinted

louvers glass fixed to alluminium strip blade including fixtures,

fastenning, labours and equipments as per detailed drawing as

directed. For Ventilators

42 Providing and fixing hollow double door shutter specially designed of 17.100 Sq.Mt. 4015.76

35x100mm M.S. pipe hallow frame with horizontal 25x25 mm M.S

square pipe band at 0.475 equal distance through the height of the

frame ,with 19mm marine plywood both side with edge beading durable

grip and durable hinges pivoted shutter with required teakwood

batten having 1mm thick lamination on both side, Durable Grip shall be

providing with both side 15cm long stainless steel handle and necessary

Locking system, SS fixtures & fastenings etc. and colour, pattern, design

of which is to be approved by the architect or directed by engineer in

Item Description of Item (with brief specification and reference to book of Quantity Unit Rate in Total

No. specifications) Figures Amount

43 Providing and fixing 35 mm thick Double flush door shutter, solid core 31.000 Sq.Mt. 5962.03

with Anodized Aluminium section (jindal door section no 19552-weight

not less than 1.1 kg/mt ) frame size 63.5mm x 38mm inserted Non teak

wood frame inside the aluminium section for durable grip of hinges &

Double shutter with required teakwood batten having 1mm thick

lamination on both side, Durable Grip shall be providing with both side

15cm long stainless steel handle and necessary Locking system, ,S.S.

fixtures & fastenings etc. directed by engineer in charge.

44 Providing and fixing 35 mm thick single flush door shutter, solid core 117.000 Sq.Mt. 5584.29

with Anodized Aluminium section (jindal door section no 19552-weight

not less than 1.1 kg/mt ) frame size 63.5mm x 38mm inserted Non teak

wood frame inside the aluminium section for durable grip of hinges &

single shutter with required teakwood batten having 1mm thick

lamination on both side, Durable Grip shall be providing with both side

15cm long stainless steel handle and necessary Locking system, S.S.

fixtures & fastenings etc. directed by engineer in charge.

45 Providing and fixing FRP frame size 100 x 50 mm and 35 mm thick FRP 53.000 Sq.Mt. 2362.39

depress panel single or Double shutter having extra reinforcement on

sides & edges in Gel coat finish.The core of the both shutter & frame is

to be filed up with injected fire retradat grade polyurethene foam done

in situ along with embeded wooden pieces for stiffening & also taking

hinges & fintures.The whole FRP frame & single or double shutter is to

be waterproof, weatherproof ,termite proof & resistance to mild

acid/alkali.Rates are to be inclusive of S.S hinges with necessary screws

& alluminum fixtures & fastenings & fartener sleeve.Colour and Shade

approved by Engineer-In-Charge.

Item Description of Item (with brief specification and reference to book of Quantity Unit Rate in Total

No. specifications) Figures Amount

46 P & L 60x45 cm Machine polished Machine cut Blue Kota Stone slab 932.000 Sq.Mt. 1066.94

flooring over 20 mm (average)thick base of cement mortar 1:6 (1-

cement 6-coarse sand) or L.M 1:1.5 (1 Lime putty : 1.5 coarse sand laid

over and jointed with grey cement slurry mixed with pigment to match

the shade of slab including rubbing and polishing etc.complete (A)

47 P & L 60x60 cm Machine polished Blue Kota Stone slab 30 mm thick in 77.000 Sq.Mt. 1166.93

riser of steps,skirting dedo and pillars laid on 10 mm thick cement

mortar 1:3 (1-cement 3-coarse sand) and jointed with grey cement

slurry mixed with pigment to match the shade of slab including rubbing

and polishing etc.complete (30 mm thick)

48 Providing & Laying 24" x 24" GVT vitrified 8 mm thick tile flooring over 1298.000 Sq.Mt. 1346.35

20 mm (average) base of cement mortar 1:6 ( 1 cement: 6 coarse sand)

on new surface or fixing on existing flooring by adhesive material

including dismentaling of existing flooring and jointed with color cement

slurry including finised with flush pointing & cleaning the surface etc.

complete shade approved by directed engineer in-charge.

49 P & L 60x60 cm' GVT vitrified 8 mm thick tile risers of steps,skirting 91.000 Sq.Mt. 1496.82

Dedo of cement mortar 1:3 (1cement : 3 coarse sand)and jointed with

by adhesive materials including colour cement slurry including finished

with flush pointing & cleaning the surface etc. complete for including

colour approved by directed.

50 P & L 24" x 24" GVT matt finish vitrified 8 mm thick tile flooring over 20 167.000 Sq.Mt. 1062.86

mm (average) base of cement mortar 1:6 ( 1 cement: 6 coarse sand) on

new surface or fixing on existing flooring by adhesive material including

dismentaling of existing flooring and jointed with color cement slurry

including finised with flush pointing & cleaning the surface etc.

complete for antiskit

Item Description of Item (with brief specification and reference to book of Quantity Unit Rate in Total

No. specifications) Figures Amount

51 P & L antiskid ceramic tiles 30 x 30 cm size 6 mm thick in flooring treads 122.000 Sq.Mt. 994.37

of steps and landing laid on a bed of 12 mm thick cement mortar 1:3(1-

cement:3-coarse sand)finishing with flush pointing in white cement

52 P & L glazed tiles tiles size 30 x 60 cm 6 mm thick in skirting risers of 504.000 Sq.Mt. 1487.88

steps and dedo on 10 mm thick cement plaster 1:3 (1-cement:3coarse

sand) and jointed with colour cement slurry

53 Providing and laying machine cut free edge machine polished granite 226.000 Sq.Mt. 2883.55

stone 18mm thick finished treads and risers in with 1cm projecting,

nozing rounded moulding in tread laid over 12 mm (av.) thick bases of

cement mortar 1:6 (1-cement : 6-coarse sand) jointed with grey or

colour cement slurry including rubbing and polishing incl. making Three

No.s of grooves of size 3mm X 3mm along the length of treads etc.

54 Providing and fixing pre-cast Rubber Dye / steel Dye inter locking 1107.000 Sq.Mt. 706.93

concrete block 60mm thick with grade of concrete M300 pnumatic

compressed / vibrated mechanically and as per approved design

Confirming to IS 15658 : 2006 including 35 mm Sand layer for levelling

and filling the joint with sand in proper line and level as per guidlines of

IRC : SP 63-2018 etc. Complete.

Item Description of Item (with brief specification and reference to book of Quantity Unit Rate in Total

No. specifications) Figures Amount

55 Providing and laying water proofing treatment with china mosaic tiles 1063.000 Sq.Mt. 1160.49

flooring over avg 50 mm C.C. 1:2:4 bedding for maintaining slope for

plain and curve surface & 12 mm to 20 mm of broken piece not more

than 2.5CM of ceramic / glazed tiles ( one for more colour as directed )

to be laid over cement mortar bedding of C M 1:3 (1 cement : 3 sand )

contain water proofing materials per bag of cement useas specified by

manufactured and slops to be tempered to bring mortar up to surface

with using white cement and colour pigment including rounding of

junctions and extending them up to 15 cm along the wall and curing

with bends any patens or design as per drawing and cleaning by using

oxalic acid etc. complete.

56 Providing and laying White Dr. Fixit Eautite Waterproofing Coating 1063.000 Liter 267.65

applying top of water proofing treatment broken chine mosaic flooring

for terrace using Coverage 1-1.3 Sq mtr per ltr @400- 500 micron DFT

etc. as directed by engineering in charge etc. complete.

57 Providing Water proofing Treatment with Dr. Fixit or Sikka on Sunk Slab 223.000 Sq.Mt. 369.96

including cement concrete flooring 1:2:4 (1-cement : 2-coarse sand : 4-

graded stone aggregate 20mm nominal size) laid in one layer and

finished with a floating coat of neat cement average 50mm thick to

Prepare slope including water proofing chemical for Sunk Slab or

Terrace etc. Complete as directed by engineering in charge. All Floor.

58 Providing and fixing mirror polished 18 mm thick Green Marble stone 576.000 Sq.Mt. 1360.47

with full round edge and polished of approved quality in clading on sill

and around the doors/ windows/ ventilation with 12 mm thick cement

mortor CM (1:4) and fixing with cement slurry & adhesive including

moulding of exposed edges as directed by engineering in charge etc.

Item Description of Item (with brief specification and reference to book of Quantity Unit Rate in Total

No. specifications) Figures Amount

59 Providing and fixing Safety grills of required pattern for windows/ Door 9083.000 Kg. 112.82

using necessary 16mm square M.S bar at , M.S flats and other structural

steel at 10cm C/C horizontally spacing including cutting, welding and

fabrication etc. including one coat of primer of approved quality and

two coats of oil painting as per detail drawing etc complete.

60 Providing and fixing in position collapsible steel shutters with vertical 370.000 Kg. 61.11

channels 20 x 10 x 2 mm braced with flat iron diagonals 20 x 5 mm size

with top and bottom rails of T_rin 40x 40 x 6 mm with 38mm dia, steel

pulleys complete with bolts, nuts, locking arrangements, stoppers

handles including applying a priming coat of red lead paint.

61 Providing erecting and fixing double coated Syntex PVC. (ISI) water tank 25000.000 Liter 3.95

of required capacity each with all necessary fittings and connection etc.

complete on terrace.

62 Providing laying and jointing in true line and level 50mm dia. U.P.V.C. 160.000 Rmt. 195.67

Pipe ( SCH- 40) for cold water including fittings or equivalent as

approved by Engineer In Charge. Pipe shall be fixed on the wall with the

help of clamp at every two metre C/C or shall be concelled as directed

including necessary fittings etc. including testing of pipe and joints and

fixing the same with adhesive solvent, including cost of all materials.

63 Providing laying and jointing in true line and level 40mm dia. U.P.V.C. 240.000 Rmt. 148.12

Pipe ( SCH- 40) for cold water including fittings or equivalent as

approved by Engineer In Charge. Pipe shall be fixed on the wall with the

help of clamp at every two metre C/C or shall be concelled as directed

including necessary fittings etc. including testing of pipe and joints and

fixing the same with adhesive solvent, including cost of all materials.

Item Description of Item (with brief specification and reference to book of Quantity Unit Rate in Total

No. specifications) Figures Amount

64 Providing laying and jointing in true line and level 25mm dia. U.P.V.C. 210.000 Rmt. 91.84

Pipe ( SCH- 40) for cold water including fittings or equivalent as

approved by Engineer In Charge. Pipe shall be fixed on the wall with the

help of clamp at every two metre C/C or shall be concelled as directed

including necessary fittings etc. including testing of pipe and joints and

fixing the same with adhesive solvent, including cost of all materials.

65 Providing laying and jointing in true line and level 15mm dia. U.P.V.C. 180.000 Rmt. 72.65

Pipe ( SCH- 40) for cold water including fittings or equivalent as

approved by Engineer In Charge. Pipe shall be fixed on the wall with the

help of clamp at every two metre C/C or shall be concelled as directed

including necessary fittings etc. including testing of pipe and joints and

fixing the same with adhesive solvent, including cost of all materials.

66 Providing, laying and jointing in true line and level 160 diametre U.P.V.C 160.000 Rmt. 834.38

(Type B) conforming to IS 13592-1992 with one end plain and other end

socketed with rubber ring, & fittings conforming to ISI 14735-1999 of

approved make for drainage system pipe line, pipe shall be jointed with

each other with rubber lubricant, pipe shall be fixed on wall using of

PVC clamp of the size 160 mm diametre x 210 mm length x 196 mm

heigh at every 2000 mm center to center or shall be concealed in walls

as directed including necessary fittings such as bends, shoes etc.

including testing of pipes and joints and jointed with adhesive solvent

cement including cost of all materials.

67 Providing laying (to level or slopes) and jointing reinforced concrete 913.000 Rmt. 678.02

Light duty non-pressure pipes I.S. class NP2 of the following internal

diameter with collars and butt ends prepared for collar joints including

testing of joints complete.(D)

Item Description of Item (with brief specification and reference to book of Quantity Unit Rate in Total

No. specifications) Figures Amount

68 Providing, laying and jointing in true line and level 110 diametre U.P.V.C 320.000 Rmt. 876.11

(Type B) conforming to IS 13592-1992 with one end plain and other end

socketed with rubber ring, & fittings conforming to ISI 14735-1999 of

approved make for drainage system pipe line, pipe shall be jointed with

each other with rubber lubricant, pipe shall be fixed on wall using of

PVC clamp of the size 110 mm diametre x 149 mm length x 145 mm

heigh at every 2000 mm center to center or shall be concealed in walls

as directed including necessary fittings such as bends, shoes etc.

including testing of pipes and joints and jointed with adhesive solvent

cement including cost of all materials.

69 Providing, laying and jointing in true line and level 75 mm dia. UPVC 120.000 Rmt. 288.86

SWRType B pipe conforming to IS 13592-1992 with one end plain and

other end socketed with rubbering and fitting conforming to ISI 14735-

1999 of approved make for drainage system pipe line, pipe shall be

jointed with each other with rubber lubricant, pipe shall be fixed on wall

using of PVC clamp at every 2000 mm c/c or shall be conceled in walss

as directed including necessary fittings such as bends, shoes etc.

including testing of pipes and joints and jointed with adhesive solvent

cement including cost of all materials.

70 Providing and fixing in PVC SWR cowel went 75mm dia to pipes.(B) 6.000 No. 15.66

71 Providing and fixing in PVC SWR cowel went 110mm dia to pipes.(B) 16.000 No. 28.79

72 Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 100 mm 46.000 No. 586.60

diameter with jali of the following nominal diameter of self cleansing

design with C.I scread down or hinged grating including the cost of

cutting and making good the walls.

Item Description of Item (with brief specification and reference to book of Quantity Unit Rate in Total

No. specifications) Figures Amount

73 Providing and fixing Wall Hung Premium Quality or equivalent snow 21.000 No. 22308.88

white size 490x350x360mm P Trap with Duroplast slim soft close seat

cover including Health Faucet ABC body with 1 m SS Braided connection

pipe, Flush cock Consisting of exposed part F1013751 (Lever, Cartridge,

sleeve, flange) and Concealed part F4060102 with all fitting inlet and

outlet connection and all required fitting accessories etc. completed as

per directed engineer in-charge.

74 Provision and fixing Premium Quality White Orissa Pan Toilet Seat, 580 7.000 No. 3097.67

X 440 mm integral footrest and 100 mm P or S trap and in cluding

mm dia CP brass flush valve and GI inlet connection etc. complete with

all required fitting accessories etc. completed as per directed engineer

75 Providing and fixing 15mm Brass Premium Quality Victor Concealed 26.000 No. 1011.01

Stop Cock including all Fittings and labour charges etc. Completed as

per directed engineer in charge.

76 Providing and fixing ball cock of approved. quality as directed.(A) Copper 5.000 No. 189.84

Metal (ii) 50mm dia.

77 Providing and fixing Wash Basin Premium Quality or equivalent Snow 30.000 No. 5908.50

White size 400x400x135mm including Polyamide braided connection

pipe 12mm dia, 450mm length Cat. No. F8070402, Wast coupling with

Premium Quality mic Pop-up push type (Full thread) 32mm Dia Cat. No.

F8050351 with all fitting inlet and outlet connection and all required

fitting accessories etc. completed as per directed engineer in-charge.

78 Providing and fixing Glass Wall Mounted 00025 LED Mirror Premium 30.000 No. 3403.70

Quality size 600mm x 450mm required fitting accessories etc.

completed as per directed engineer in-charge.

79 Providing and fixing Premium Quality SS towel rail having 0.60 SS rod 20.000 No. 1371.58

End Pair including all screws, Fittings and labour charges etc. Completed

as per directed engineer in charge.

Item Description of Item (with brief specification and reference to book of Quantity Unit Rate in Total

No. specifications) Figures Amount

80 Providing and fixing Premium Quality Bib cock with Wall Flange and 53.000 No. 2657.31

aerator with 15mm dia extension nipple including all Fittings and

labour charges etc. Completed as per directed engineer in charge.

81 Providing and fixing Premium Quality Pillar cock with 310mm long 44.000 No. 4066.26

extended body and aerator including all Fittings and labour charges

etc. Completed as per directed engineer in charge.

82 Providing and fixing in position 300 mm high, 150 mm wide English 60.000 No. 707.00

letters made from 1.0 mm thick stainless steel sheet as directed by

Engineer in charge with all necessary tools & plants etc. complete.

83 Providing and fixing Premium Quality Urinals - Snow White size 375 x 15.000 No. 6150.90

390 x 590 mm including all Fittings and labour charges etc. Completed

as per directed engineer in charge.

84 Providing and fixing Premium Quality Half Turn Flush Cocks including 42.000 No. 1603.88

all Fittings and labour charges etc. Completed as per directed engineer

85 Providing and fixing Premium Quality Angle cock with wall flange 15.000 No. 2045.25

including all Fittings and labour charges etc. Completed as per directed

engineer in charge.

86 Providing and fixing S.W. gully trap with C.I. grating brick masonry 12.000 No. 1246.92

chamber and water tight C.I. cover with frame of 300mm x 300mm size

(inside) with standard weight (i) Square mouth traps (B) 150mm x

100mm size P or R type

Item Description of Item (with brief specification and reference to book of Quantity Unit Rate in Total

No. specifications) Figures Amount

87 Constructing brick masonry chamber for underground C.I. Inspection 52.000 No. 3172.41

chamber and bends with briocks having croshing strength not less than

35Kg. Cm2 in C.M. 1:5 precast RCC cover 455mm x 610mm intenal

dimensions with frame (R.C.C. top slabe with 1:2:4 mix (1-cement :2-

coarse sand :4-graded stone aggregate 20mm size) foundation concrete

1:5:10 inside plaster 15mm thick with cement mortar 1:3 finished

smooth with a floating coat of neat cement on walls and bed concrete

etc. complete (i) Inside dimensions 455mmx 610mm and 450mm deep

for single pipe line.

88 Constructing brick masonry chamber for underground C.I. Inspection C.I. 26.000 No. 3883.45

Inspection chamber and bends with briocks having croshing strength

not less than 35Kg. Cm2 in C.M. 1:5 precast RCC cover 500mmx 700mm

intenal dimensions with frame (R.C.C. top slabe with 1:2:4 mix (1-

cement :2- coarse sand :4-graded stone aggregate 20mm size)

foundation concrete 1:5:10 inside plaster 15mm thick with cement

mortar 1:3 finished smooth with a floating coat of neat cement on walls

and bed concrete etc. complete (i) Inside dimensions 500mmx 700mm

and 450mm deep for single pipe line.

89 Extra over items for every additional depth of 0.1M. of part thereof 16.000 No. 242.39

beyond 450mm depth for Brick masonry chamber.(i) for 455mm x

90 Extra over items for every additional depth of 0.1M. of part thereof 16.000 No. 264.86

beyond 450mm depth for Brick masonry chamber.(i) for 500mm x

91 Providing cement vata (10cm x 10cm size) quarter round in cement 198.000 Rmt. 24.28

mortar 1:1 including neat cement finishing watering etc. Complete

Item Description of Item (with brief specification and reference to book of Quantity Unit Rate in Total

No. specifications) Figures Amount

92 Providing and fixing MS Ladder of required pattern with MS 300.000 Kg. 116.15

flats(30x3mm) or round or square bars (12mm) at required spacing &

with round headed bolts and nuts or screws or welding including primer

coat of approved quality and two coats of oil paintas as directed by

engineer in charge

93 Providing and fixing in position 150 mm high, English letters made from 50.000 No. 404.00

1.0 mm thick stainless steel sheet as directed by Engineer in charge with

all necessary tools & plants etc. complete.

94 Providing and fixing polished 18 mm thick black granite with full round 20.000 Sq.Mt. 2650.24

edge and double side polished of approved quality in between urinal

and fixing with cement slurry & adhesive including moulding of both

exposed edges as directed by engineering in charge etc. complete.

95 Constructing kitchen Platform of 18 mm thick Polished Black Granite at 7.000 Sq.Mt. 4392.49

top and 25 mm thick Kota stone slab one side polished at bottom with

cementing Materials / adhsives including makeing necessary grooves in

walls with Vertical sandwich two Kotastone 25 mm support every

cm centre to centre or as required including all labour material of

approved quality incl. full moulded round front edge granite strip of

one side polished and jointed with grey cement slurry including rubbing

and polishing etc. complete for all floors

96 Providing and fixing 25 mm thick polished kota stone Shalve with full 94.000 Sq.Mt. 667.61

round edge and double side polished of any required and fixing with

cement slurry & adhesive including both exposed edges cut and

Smooth Finished as directed by engineering in charge etc. complete.

Item Description of Item (with brief specification and reference to book of Quantity Unit Rate in Total

No. specifications) Figures Amount

97 Providing & fixing in position glass partition with standard extruded 314.000 Sq.Mt. 2444.20

colored anodized aluminum frame size 63mm x 38mm x 2mm thick

make vertical and horizontal grid distance as shown in drawing with

12mm thick toughen glass directed with glass film, fixed with

transparent silicon rubber gasket in panel with glazing clips 19 mm x

17.3mmx1.2mm in size including fixtures and fastening with required all

labour and equipment and including rebar up to slab level in half

partition and as per detailed drawing as directed with all lead and lift.

98 Providing and fixing Kitchen sink with C.I. or M.S. brackets, painted 2.000 No. 3640.04

white including cutting holes in walls and making good the same but

excluding fittings. (C) Vitreous China Sink.(i) 600mm x 450mm x 150mm

99 Providing and fixing kitchen platform trolley having three drawers of SS 7.000 Sq.Mt. 13051.22

(IS 304) of required size like thali, katleri, perforated, partition, cupsosar

type in kitchen platform having drawer front side and backside by using

19mm thick all proof plywood of ISI quality all side laminated etc. as

directed. The size of SS (IS 304) basket of size 4" to 18" for thali, dish,

katleri, perforated, partition, cupsosar type as directed including

necessary S.S. fittings, handles, nobs, telescopic channels, etc. as

100 Providing and fixing 0.75 meter wide sand which type counter platform 11.000 Sq.Mt. 7256.85

including supplying and fixing granite stone of Z black or equivalant

quality 18 mm thick mirror polished on top and side posiition and

vertical strip at front with cement slurry & adhesive including moulding

of both exposed edges over 25 mm thick kotah stone platform fixing in

top and sides and itermediates supports fixing with cement mortar and

adhesive and finishing all material and labour and assessories and 3 no

flat back wash with necessary fitting complete etc.

Item Description of Item (with brief specification and reference to book of Quantity Unit Rate in Total

No. specifications) Figures Amount

101 Providing & Fixing 114mm wide G.I. Sheets lovers having weight not less 51.000 Sq.Mt. 4857.09

than 490 Gm/m roll formed to create 84mm wide louver snap fixed on

special shaped GI channel. Fix louvers & channels shall finished with

powder coating of 55 micron (1) 0.55mm thick sheet.etc. complet as

per detail drawing as directed.

102 Providing & Fixing Foundation Or Digging Mild Steel Flag Pole (Made in 1.000 No. 6060.00

India) Size Min 3 mtr to 30 mtr with flag Supplying of Tubular Or

Polygonal segment Flag poles, Made in Mild steel material with Pure

polyester powder coated or Hot dip galvanize surface finishing.The Flag

is movable type. etc. complet as per detail drawing as directed.

103 Providing and fixing acrylic multilingual Braille (raised dots) 45.000 No. 2041.72

DIRECTIONAL SIGNBOARDS of size 225 x 150mm designed as per

accessibility standards and having 3.5mm thick acrylic base plate with

Upper Case San Serif words made of white acrylic non glare cut out

letters of height 15mm raised not less than 0.8mm above base plate and

the equivalent word written in Hindi with Devanagari non glare acrylic

letters of height 15mm raised not less than 0.8mm above base plate and

having a non-glare acrylic cut arrow pointing in the required direction.

Each signboard to be fixed as per manufacturers specifications on the

wall at the approved location and at a height of 1200mm from FFL

complete as per design / specifications and guidelines as per the entire

satisfaction of the Engineer-in-charge

Item Description of Item (with brief specification and reference to book of Quantity Unit Rate in Total

No. specifications) Figures Amount

104 Providing & Fixing tactile layout plan of size 900mm x 600mm as 3.000 No. 38380.00

approved design, made of 3.0mm thick acrylic non glare base plate and

non glare cut out symbols with Braille on which individual facility points,

like inquiry, reception, restrooms, medical room / first aid, cafeteria or

breakout area, lounge, meeting room, conference room etc. present the

respective floors with pictograph wherever needed all in tactile raised

by minimum of 1.0mm to 2mm in various colours to make it legible for

seniors, partial vision impaired etc. All the facility names should be in

Braille, along with English or Hindi. The entire block of tactile signs

should be mounted on wall for easy reading. The map to be installed at

specified locations and installed at a height of 800mm from ground level

complete in all respect as per Harmonized guideline & satisfaction of

Engineer in charges.

105 Providing and fixing of acrylic, non-glare, tactile audio pictorial building 3.000 No. 50500.00

layout as per the approved size, design and make, having 3mm thick

acrylic non glare base plate of the approved colour and non-glare acrylic

cut out symbols raised 3mm above base plate and Grade 2/ Grade

Braille to be integral with the sign face and be raised 0.5mm above base

plate. The map to be installed at the specified location as per

accessibility standards, shall be oriented to the position of the viewer

and to be installed at a height of 800 mm from the finished ground/

floor level and using the necessary hardware specified by the

manufacturer and to be installed up to the height of 800 mm from the

finished ground/ floor level and using the necessary hardware specified

by the manufacturer and to be installed complete as per

design/specifications and guidelines as per the entire satisfaction of the

the Engineer-in-charge

Item Description of Item (with brief specification and reference to book of Quantity Unit Rate in Total

No. specifications) Figures Amount

106 Providing & Fixing Braile Indicator Of Size 170 mm X 35 mm For 30.000 No. 1093.83

Handrails Of The Approved Design And Make Have Braile Dots Raised

0.5 mm Above Base Plate To Be Installed At Specific Locations As Per

Direction Of Engineer In Charge

107 Providing and Fixing Size: L 75mm x W 75mm x H 1200 ; 15 mm thick U 10.000 No. 685.29

shape corner Rubber Reflective Guards with yellow reflective Patti

fixing on RCC/brick surface Including all fitting and material charges & it

shall be Chemical Resistant, Fade Proof, Frost - Heat & Weather Proof,

High Flexural Strength, Highly Durable, Stain Resistance as per detailed

drawing etc. complete as directed by Architect or Engineer in charge.

108 Providing and Fixing 15 mm thick 300 mm x 300 mm Tactile Warning 180.000 Sq.Mt. 1114.03

Tiles (Attention Tiles i.e. Tactile Warning Surface Indicator {TWSI}) of

Johnsan Endura Tac Button Yellow Plus or equvqlent make in flooring

laid on 20 mm thick cement mortar 1:6 (1 cement : 6 coarse sand) on

new surface and jointed with cement slurry including finished with flush

pointing & cleaning the surface for all floors as per detailed drawing etc.

complete as directed by Architect or Engineer in charge. Thse tiles shall

be Anti Skid, Chemical Resistant, Fade Proof, Frost - Heat & Weather

Proof, High Flexural Strength, Highly Durable, Stain Resistance . All

Tactile Warning Tiles meet the specific size and dimension standards as

required by ISO/FDIS

109 Providing and Fixing a set of wall mounted 38 mm dia U shaped 3.000 No. 6388.25

horizontal stainless steel collapsible grab bar , 38mm vertical stainless

steel fixed grab rail of grade SS 304 from round pipe supported and

mm dia 8 mm thick SS 304 base flange on wall including anchor

fasteners, nuts, accessories as per detailed drawing etc. complete as

directed by Architect or Engineer in charge.

Item Description of Item (with brief specification and reference to book of Quantity Unit Rate in Total

No. specifications) Figures Amount

110 Providing and fixing of conspectus tape 50mm width on of treads in 30.000 Rmt. 2557.83

staircase including cutting pasting etc. As per harmonised guidelines

complete in all respect to the entire satisfaction of engineer in charge.

111 Providing and fixing C.I. Manhole cover 0.60 M. x 0.45M. size having 8.000 No. 958.17

weight not less than 35Kg.

112 Providing & erecting open well horizontal mono block pump set with 3.000 No. 36107.50

cast iron body, complete for three phase submersible motor having

[H]For 15 H.P,3 phase open well horizontal mono block pump set

suitable for 1600 LPM to 1025 LPM @ 33 to 42 MTR head suitable for

65/80 mm dia delivery pipe

113 Supplying & erecting approvedmake 3 phase motor control cubicalpanel 3.000 No. 19695.00

(Star-Delta) made from 16G.CRCA sheet duty painted with epoxy

powder painted inside and outside with hinged doors and locking

arrangement, consisting suitable size of ON-OFF isolator (AC- 3/23duty)

main fuses,single phasing preventer cum water level, Guard(Compe

unit), Toggle switch to by pass Single phase preventercum

WLG,indicating lamps forR-Y-Bphases, over load relay.Automatic water

level controller, Ammeter &Voltmeter each with two way selector

switch incoming wires duty socket Crimped,Panel to be erected on angle

iron frame grouted on wall as overload relay,thermal/Electronics star

delta cutoff timer,start-stop push buttons.The isolator overload relay

&cntractors ofL&T,Siemens or Cuttler Hamer make only.Panel to be

erected on angle iron frame ground on wall (e)S/D upto 2.5 H.P.

Item Description of Item (with brief specification and reference to book of Quantity Unit Rate in Total

No. specifications) Figures Amount

114 Providing and fixing rolling shutters of approved make made of 80 mm 10.000 Sq.Mt. 3554.40

wide M.S laths inter-locked together through heir entire length and

jointed together at the ends by end locks mounted on specially

designed pipe shaft with bracket plates,guide channels and

arrangement for inside and outside locking with push-pull operation

including the cost of hood cover and sprig etc.complete(A) Shutters

having width below 3.5M

115 Providing and laying broken chine mosaic flooring for terrace using 12 75.000 Sq.Mt. 779.70

mm to 20 mm broken pieces of glazed tiles to be laid over cement

mortar 1:3 to plain or slope and to be tempered to bring mortar creme

out upto surface using white cement including rounding off junctions

and extending them upto 15 cm along the wall,clearing with water and

oxalic acid etc. as directed.

116 Providing and laying cement concrete flooring 1:2:4 (1-cement : 2- 143.000 Sq.Mt. 352.01

coarse sand : 4-graded stone aggregate 20mm nominal size) laid in one

layer and finished with a floating coat of neat cement. (A) 50mm thick.

117 Drilling of Bore Hole an Alluvial Strata by Direct Rotary 300.000 Mtr. 443.39

Ring size 200mm/250 mm dia.

118 Reaming of 200 mm / 250 mm dia Pilot Bore Hole including 300.000 Mtr. 202.00

assembling lowering housing casing strainer pipe gravel packing

clay packing etc. complete size. 550mrn dia .

119 M.S.E.R.W. plain end medium duty pipe conforming to IS 4270 / 1992 230.000 Mtr. 1625.09

with latest amendment in rendom length of 4 to 7 mtrs. size 200 mm

dia. (minimum 6.89 mm thickness)

120 M.S.E.R.W. strainer pipe medium duty conforming to IS 4270/1992 with 70.000 Mtr. 2390.67

length of 4 to 7 mtr. (minimum 6.89 mm thickness and the pipe having

slots of size 6.75 mm x 6.35 mm x 3.12 mm and packing of direct

considering minimum 1080 nos. of holes per Rmt of pipe size of pipe

Item Description of Item (with brief specification and reference to book of Quantity Unit Rate in Total

No. specifications) Figures Amount

121 Clamps made from M.S. plate with 3 hole on either side with nuts and 1.000 Pair 1682.66

bolts of std. make size 900 mm x 100 mm x 16 mm suitable for 200 mm

122 Bore plug having 100 mm height made from M.S. plate with 3 holes at 1.000 No. 954.45

equal distance on circumference for nut bolts type locking

arrangements with nut bolts and lock nuts of std. make complete from

mm thick M.S. Plates (for top also suitable 200 mm dia pipe)_

123 M.S. bail plug having length 0.45 mtr. from medium class pipe as per ISS 1.000 No. 874.66

suitable 250 mm dia. pipe.

124 Steel bent plate suitable to 250 mm dia. ERW pipe size 200 mm x 150 100.000 No. 70.70

125 Privding best quality of well sorted "sevalia" gravel of size 4 mm to 6 20.000 Cu.Mt. 1653.37

mm including loading, unloading, carting up to site of work stacking etc.

complete as directed.

126 Supply of ISI marked portland cement of store or site of works including 1.000 M.T. 5147.97

all tax with loading, unloading, freight etc. complete as directed

127 Cement sealing if necessary without cost of cement by means of mud 1.000 L.S. 10716.10

128 Charge of electrologging test of bore hole uptrom make electrologger. 1.000 Job 14134.95

129 Lowering and removing of 100 mm drop line and 32 mm dia. airline for 1.000 Job 20692.88

development of each water bearing zones comes across up to the full

depth of deep tube well (size 200 mm / 250 mm / 300 dia. for tube well

having depth of 151 mtr. and above though suitable air compressor. The

job is complete period of development of tubewell without air

compressor charges.

130 Charge of air compressor of 1100 CFM / 250 RSI including all the require 1.000 Job 22073.55

accessories and machinaries.

Item Description of Item (with brief specification and reference to book of Quantity Unit Rate in Total

No. specifications) Figures Amount

131 Geohydrological ground water investingation (with vehicle charges) for 1.000 Job 7064.95

200 mm / 250 mm dia deep tubewell (with water sample testing)

132 Supplying submiersible pumpset for bore of 200 mm dia. or more having 2.000 No. 55752.00

3 phase motor capacity about 25 H.P. and dischage capacity having

LPM dischages at the head 87 to 115 mtres. suitable for 80 mm dia

delivered pipe cat. III.

133 Lowering of submersible motor pump set complete with required nos. 1.000 Job 3535.00

and size of casing pipes erected by means of proper chain pulley block

and pipe wrenches after checking of threads of each pie with coupling

to take the load of the pump set and pipe assembly filled up with water

134 Supplying and erecting approved make 3 phase motor control pannel 1.000 No. 25553.00

(ATS) made 16 G CRCA sheet duly painted with epoxy power paint inside

and outside with hinged door and locking arrangement consisting of

suitable switch of AC 23 duly with HRC fuses (Cat.III) staring and running

contractor, overload relay, electronic timer with master timer CT

operated ameter with selctor switch, voltmeter with selector switch,

pahde indicating lamps, single phasing preventor, water level guard over

load star, run and stop push buttons, air cooled auto transformer with

60 %, 70 %, 80 % tapping contractor, relats timer etc. shall be of L & T /

siemens / cutler hammer make (e) suitable for 2 HP.

135 Providing and erecting ISI marked PVC insulated PVC shethed flat 200.000 Mtr. 126.25

flexible submersible copper cable approved make of following size (f)

core x 4 sq. mt.

Item Description of Item (with brief specification and reference to book of Quantity Unit Rate in Total

No. specifications) Figures Amount

136 G.I. column pipe heavy duty 'c' class having 3 mtr. (approx) length and 8 1.000 No. 2762.35

TPI threaded on both the ends with M.S. heavy duty coupling 8 TPI

threaded with circular welding on the pipe to take load of pump and

pipe assembly suitable for 80 mm dia (3")

137 Heavy duty clamps made from 4" x 1.5 " iron strin suitable for column 2.000 No. 171.70

pipe 1.5 " to 2 " length (E) 100 mm (4") dia. pipe

138 Supplying and erecting funnle type earthing having earth plate of 30.000 No. 3030.00

following size burried in speicifically prepared earth pit 3 mtr. below

ground with 40 kg. charcol and salt with alternate layers of charcol and

salt 20 mm dia. G.I. pipe with funnel with a wiremesh for watering and

bricks masonry block C.I. cover complete as per para 7.3 of IS 3043 with

necessary length of double G.I. / copper earth wire no 6 SWG bolted

with lug to the plate and coverd in 12 mm dia. G.I. pipe 2.5 mtr. long

comp. connected to the nearest. Switchgear with end socket as per

direction and duly tested by earth tester confirming to ISS ( as per

drawing) with following specification. (A) only pupe earthing without

earth plate and with 4.5 mtr. long 40 mm dia. G.I. earth pipe (as per

drawing ) (D) with 60 x 60 x 0.315 cms. copper earth plate.

139 Approved make four pole moulded case circuuit breaker bracking 2.000 No. 4969.20

capaicty ICU of 35 K.A. at 415 V. having noemal current rating up to

A. With variable thermal and magnetic release suitable to work on A.C.

supply 50 cyc. with all internal connections and complete erected in

G.M.S. housing on angle frame. (Cat.III)

Item Description of Item (with brief specification and reference to book of Quantity Unit Rate in Total

No. specifications) Figures Amount

140 Supplying and erecting ISI approved make power capacitor for 440 V 50 1.000 No. 328.25

Cyc. per KVRA complete to be erected on agnel iron frame.(A) Metalised

poypropylene dry type ( up to 25 KVAR ) heavy duty.

141 Providing approvied make triple pole metal clad switch fuse unit 415 / 1.000 No. 5241.90

500 V. with HRC fuse of suitable load and neutral link confirming to ISS

(b) 63 A. cat. III.

142 Providing approvied make triple pole metal clad switch fuse unit 415 / 10.000 No. 3181.50

500 V. with HRC fuse of suitable load and neutral link confirming to ISS

(C) 63 A. cat. III.

143 Supplying and erecting ISI marked sluice valve at position with necessary 2.000 No. 1534.19

materials for following size of pipe diamter (vi) 80 mm dia.

144 Supplying and erecting CI swing check type non return (reflux) valve ISI 2.000 No. 1313.00

marked suitable for 80 mm dia.

145 Supplying and erecting mild steel heavy duty flanges with rubber 1.000 No. 133.32

packing and hardware materials for pipe connections suitable for (D)

146 Supplying and erecting G.I. bend for pipe connection suitable for (g) 100 1.000 No. 353.50

147 Supplying ISI marked (EmbosseD) following size of heavy duty 'C' class 8.000 No. 394.91

G.I. pipes and erecting as directed by engineer in charge with necessary

plumbing as desired. (g) 80 mm dia.

Item Description of Item (with brief specification and reference to book of Quantity Unit Rate in Total

No. specifications) Figures Amount

148 Supply of nut bolt rubbler packing and redg. materials and delivery 2.000 No. 3030.00

connection for new bore.

149 Providing and erecting ISI marked PVC insulated PVC shethed flat 6.000 Mtr. 82.82

flexible submersible copper cable approved make of following size (e)

core x 4 sq. mt.

150 Providing and erecting open well type horizontal monoblock pump set 1.000 L.S. 16816.50

with cast iron body comp. with 5 HP three phase submersible motor

operating on 415 V. 50A. A.C. supply having (B) 600 LPM dischage @

mtr. head suitable for 80 mm dia. delivery pipe cat. II.

151 Supplying and erecting ISI marked sluice valve at position with necessary 30.000 Rmt 616.10

materials for following size of pipe diamter (vi) 50 mm dia.(3'')

152 Supplying and erecting CI swing check type non return (reflux) valve ISI 2.000 No. 848.40

marked suitable for 50 mm dia.

153 Supplying and erecting mild steel heavy duty with rubber packing and 2.000 No. 98.98

hardware materials for pipe connections suitable for (D) 50 mm (3 '')

154 Supplying ISI marked (Embossed) following size of heavy duty 'C' class 2.000 No. 255.53

G.I. pipes and erecting as directed by engineer in charge with necessary

plumbing as desired. (F) 50 mm dia.

Item Description of Item (with brief specification and reference to book of Quantity Unit Rate in Total

No. specifications) Figures Amount

155 Supplying and erecting approved make 3 phase motor control pannel 8.000 No. 9342.50

(ATS) made 16 G CRCA sheet duly painted with epoxy power paint inside

and outside with hinged door and locking arrangement consisting of

suitable switch of AC 23 duly with HRC fuses (Cat.III) staring and running

contractor, overload relay, electronic timer with master timer CT

operated ameter with selctor switch, voltmeter with selector switch,

pahde indicating lamps, single phasing preventor, water level guard over

load star, run and stop push buttons, air cooled auto transformer with

60 %, 70 %, 80 % tapping contractor, relats timer etc. shall be of L & T /

siemens / cutler hammer make (b) S/D up to 7.5 H.P.

156 Providing and supplying ISI make G.I. pipe with coupling of following 12.000 Mtr. 612.06

class 'B' including all taxes, insurance, transportation, freight charge,

octroi, inspection charges, loading, unloading, covenyance to deptt.

storess stacking etc. completed 80 mm dia. IS 1239 /

157 Supply. installation, testing & commissioning of ISI approved electrical 1.000 No. 116150.00

motor driven jockey pump set having 10.8 m3/hr. @ 70m head. The

pump unit shall be a horizontally direct mounted motor. Unit shall

comprise the following minimum requirements:

a) Pump, b) Electric motor IE2, c) Foundation bolts, d) Mating flanges

with gasket and fasteners, e) Discharge gauges, etc. complete in all

respect, with labour, with GST.

158 Supply, installation, testing & commissioning of Priming tank,HDPE 1.000 No. 60600.00

type, 1000 litres, with necessary piping 100 mm size, G.I pipe for

priming the pumps, pipe of with butterfly valves for isolation, Water

Filling to priming tank by piping min. 50 mm size, ,with all complete.

Item Description of Item (with brief specification and reference to book of Quantity Unit Rate in Total

No. specifications) Figures Amount

159 Supply, fabrication & erection of aboveground G.I. 'C'-Class, ERW piping, 150.000 Mtr. 469.65

conforming to IS:1239, part-I, Heavy class up to 150 mm dia. and

IS:3589, for size 200 mm dia. & above, thickness. G.I. pipe fitting's as

per IS: 1239, part-II, Heavy class for size 150 mm dia. & below & IS:

3589, for size 200 mm dia. above, flanges, nuts bolts & washers, 3 mm

thick gasket, pipe hangers, etc.

Hydrostatic testing for 2 hour's at 150% of the system pressure, hook-up

Painting for piping, fittings & structural pipe support, shall be two coat

of zinc primer and two coats of fire red conf. to IS: 5, Shade

Complete with all accessories as per approved drawings, specicification

and direction of the Engineer-in-Charge, with all complete. 25 mm dia.

Item Description of Item (with brief specification and reference to book of Quantity Unit Rate in Total

No. specifications) Figures Amount

164 Supply, installtion, testing & commissioing of Underground GI (ERW) 6.000 Mtr. 2383.60

piping conforming to IS:1239, part-I, Heavy class ('C' class) up to 150 mm

dia. and IS:3589 Heavy class ('C' class), for 200 mm dia. & above, min.

6.35mm thickness including Heavy class fittings, anti-corrosive tape of

size 150 mm wide x 4 mm thick, wrapping & coating with 13KV holiday

testing . Rates shall include sand bedding of 75mm dia all around,

backfilling of the excavated including installation of heavy pipe fitting's,

10 % of all the welded joints shall be done radiographically tested and

50% of the joints radiographed shall be the "Field Joints".

Hydrostatic testing for 2 hours at 150% of the system pressure, hook-up

etc., complete with all accessories as per approved drawings,

specicification and direction of the Engineer-in-Charge, with all

complete. (Road Crossing) 100 mm dia.

166 Design , Supply and installation of Safety Signage made of Zinc Sulphilde 10000.000 Sq.inch 11.11

based glow in dark , Rigid sheet with High Luminous property enclosed

in a transperent weather proof UV stabilized plastic pasted on 3 mm

thick clear acrylic sheet such as EXITS, EMERGENCY EXIT, DO NOT USE

LIFT DURING FIRE, FLOOR MARKINGS, FIRE LIFT, STAIRCASE EXIT, FIRE

ALARM CALL POINT, FIRE HOSE REEL, FIRE HYDRANT POINT etc.

167 Supply, installation, testing & commissioning of pressure switch. (Range 3.000 No. 3333.00

168 Supply, installation, testing & commissioning of 150 mm dia. dial 4.000 No. 3232.00

Burdon Type Glycerine Filled pressure gauge with isolation ball valve

arrangements with necessary isolation valves with all complete.( Range

Item Description of Item (with brief specification and reference to book of Quantity Unit Rate in Total

No. specifications) Figures Amount

169 Supply, installation, testing & commissioning of Cast iron body double 3.000 No. 6969.00

flanged gate valve With Rising Spinldle conf. to IS: 14846, PN-1.6 with

mating flanges, drilling as per IS/ANSI 150# with mating flanges,

galvanized nut, bolts & washers, gasket 3 mm thick, etc., with all

complete. 50 mm dia.

172 Supply, Installation, Testing & Commissioning of Cast iron body 12.000 No. 2373.50

Butterfly valve according to IS: 13095, PN-1.6, Iron Disc for size 150 mm

dia. & below Lever operated and above 150 mm dia. Gear operated

complete with mating flanges /ANSI class # 150 with bolts & nuts

washers, rubber gaskets 3 mm thick, etc., with all complete. 50 mm

175 Supply, installation, testing & commissioning of Cast iron body NRV 1.000 No. 6918.50

conf. to IS: 5312, PN-1.6 complete with mating Flanges/IS/ ANSI class #

150 with bolts & nuts, washers, gaskets 3 mm thick, etc., with all

complete Accessories 50 mm dia.

178 Supply, installation, testing & commissioning of SG iron body 1.000 No. 2121.00

SinglePlate Wafer Type NRV conf. to ASTMA 536, PN-1.6 complete with

mating Flanges class # 150 with bolts & nuts, washers, gaskets 3 mm

thick, etc., with all complete. Accessories

179 Supply, installing, testing and commissioning of Normax make CI heavy 1.000 No. 4949.00

duty ball type foot valve with flanges, nut bolts, gaskets etc. with

necessary complete accessories. 80 mm dia.

Item Description of Item (with brief specification and reference to book of Quantity Unit Rate in Total

No. specifications) Figures Amount

181 Supply, installation, testing & commissioning of Four way fire brigade 1.000 No. 10605.00

Inlet connection with 63 mm dia. stainless steel (SS304) instantaneous

male inlets with built in non return valve in each inlet with 150 mm dia.

header pipe, suitable rubber cap and GI chain including nuts, bolts,

washers, gasket 3 mm thick, etc. with all complete.

182 Supply, installation, testing & commissioning of Oblique pattern type 18.000 No. 6413.50

stainless steel (SS 304) single headed External Fire Hydrant Valve with

63 mm dia. female instantaneous outlet conf. to IS: 5290, type - A,

including mating flanges, galvanised nuts, galvanised bolts/studs,

washers & gaskets 3 mm thick with all complete.

183 Supply, installation, testing & commissioning of 63 mm dia. stainless 18.000 No. 2070.50

steel (SS 304) Universal Branch Pipe conf. to IS:

184 Supply & installation, testing & commissioing of Fire Fighting Hose - 18.000 No. 8221.40

conf. to IS : 636, type B (type- 3), The fire hose shall be 15 m long with

63 mm dia. stainless steel (SS 304) couplings conf. to IS: 903, at both the

ends for connection with the hydrant valve and the branch pipe.

185 Supply, installation, testing & commissioning of fabricated from 3 mm 18.000 No. 2979.50

MS sheet, hose box of size-450 mm x 600 mm x 250 mm - painted with

Fire Red as per IS: 5, shade no. 536 front 3 mm thick transparent glass

with lock & key, handle and brass hinges - to accommodate one number

of 15 mtr long hose and one number of universal branch pipe, including

supporting arrangement with civil work.

Item Description of Item (with brief specification and reference to book of Quantity Unit Rate in Total

No. specifications) Figures Amount

186 Supply, Installation, testing & commissioing of Swinging type mild steel 18.000 No. 8736.50

hose reel drum with 20 mm dia. x 30 mtr. rubber hose as per IS:

The mounting stand shall be of mild steel and the hose shall be fitted

with a SS shut-off nozzle & SS ball valve of 25 mm dia. including

supporting arrangement with all complete. accessories

187 Supplying, fixing & testing of of CI ball Valve 25mm dia. (Thread) 10.000 No. 833.25

188 Supplying, fixing & testing of New Battery of diesel engine 150 Amp. 1.000 No. 18685.00

189 Supply and installation of Diesel Tank For Diesel Engine With All 1.000 No. 19695.00

Accessories 100 Ltrs.

190 Supplying, filling & testing lube oil for diesel engine 15.000 Liter 378.75

191 Supply and commissioning of Oil Filter. 1.000 No. 833.25

192 Supplying, filling of diesel in diesel engine tank 100.000 Liter 106.05

193 Excavation of foundation, Lead And Liftting of soil work and RCC work 6.000 Cu.Mt. 6666.00

194 Filling Of Gaps Between pipe and Core Cutting Hole With Chemical and 28.000 No. 353.50

195 Supply,fabrication and erection of Structure MS Material as like Angle, C 150.000 Kg. 90.90

channel,I Beam Etc.

196 Supply, installation and commissioning of Flexible cable for 1.5 sq mm x 30.000 Mtr. 85.85

3 core for pressure switch

197 Supply, installation and commissioning of Copper Armour cable for 10 15.000 Mtr. 222.20

HP Motor - 4 sq mm x 3 Core (Only Fire Panel to Fire Pump)

198 Supply, installation and commissioning of Copper Armour cable for 40 24.000 Mtr. 404.00

HP Motor - 10 sq mm x 3 Core (Only Fie Panel to Fire Pump)

199 Supply, installation and commissioning of Copper Armour Cable for 20.000 Mtr. 191.90

Diesel Engine Battery Charger - 2.5 sq mm x 3 core.

200 Supply, Filling and Fixing of approved make ABC type fire extinguisher - 20.000 No. 2323.00

6 Kg. Capacity as per IS:15683 & IS :

Item Description of Item (with brief specification and reference to book of Quantity Unit Rate in Total

No. specifications) Figures Amount

201 Supply, Filling and Fixing of approved make CO2 type fire extinguisher. 20.000 No. 6514.50

Capacity 4.5 Kg. (conforming to IS-15683).

202 Supply, Filling and Fixing of approved make ABC Moduler type 20.000 No. 4040.00

automatic fire extinguisher. Capacity 5 Kg. (conforming to IS-15683).

203 Submitting the application to obtain Fire NOC for one year to SMC 1.000 No. 60600.00

Department,Providing complete practical demonstration of fire system

in presence of fire officer and Submitting the photographs of

demonstration, refilling and testing certificates of fire

extinguisher,Obtaining and providing certificate of FPCOR, Payment of

NOC Fees to SMC Department, Preparing the documents of Affidavit

and AMC with Notorization And Submitting to Department, follow up to

receive NOC And Providing to R & B Including all above expenditure.

204 Supply, Installation and commissioning of Fire Alarm Panel Conventional 1.000 No. 60600.00

type, 8 zone, with complete accessories.

205 Supply, Installation and commissioning of smoke detectors / heat 40.000 No. 1212.00

detectors, with complete accessories.

206 Supply, Installation and commissioning of plug in base for the smoke 40.000 No. 303.00

detectors, hooters, with complete accessories.

207 Supply, Installation and commissioning of Audio hooters , with complete 15.000 No. 1262.50

208 Supply, Installation and commissioning of Manual Call Points, with 15.000 No. 1191.80

complete accessories.

209 Cable(Armour) for Fire Alarm system 1000.000 Mtr. 111.10

210 Core cutting in wall and in RCC slab with size as below: 40 mm dia. Hole 10.000 No. 404.00

211 80 mm dia. Hole 2.000 No. 505.00

Item Description of Item (with brief specification and reference to book of Quantity Unit Rate in Total

No. specifications) Figures Amount

215 Supply, installation, testing & commissioning of ISI approved electrical 1.000 Set 323200.00

motor operated Kirloskar make fire hydrant main pump set horizontal

end suction back pull out top discharge centrifugal fire pump set with all

the standard acessories, base frame, coupling, and foundation bolts

with following specifications

Model -DB 80/26, Flow-

Motor Rating -45KW/60HP/3 ph Suc x

216 Supplying, Installation, Testing and commissioning of Kirloskar make 1.000 No. 576710.00

diesel engine driven fire hydrant pump set suitable for automatic

operation and consisting of following: horizontal type, centrifugal end

suction back pull out, top discharge pump of cast iron body & bronze

impeller with m.s.fabricated common base plate, coupling, coupling

guard, foundation bolts etc.,as required.

Flow-137 m3/hr,

Engine - 72 HP / 3 ph Suc x

Item Description of Item (with brief specification and reference to book of Quantity Unit Rate in Total

No. specifications) Figures Amount

217 Fire Hydrant Panel suitable for 10 hp Jockey pump, 60 hp (137 m3/hr @ 1.000 No. 183820.00

70 m head) main electrical pump and 62 hp (137 m3/hr @ 70 m head)

Diesel engine operated pump

A) Incomer MCCB - 1 Nos R Y B Indication - 1 Set VAF Digital Meter -

Set B) Outgoing F1 60 HP Star Delta Starter - 1 For Main pump F2 10 HP

DOL Starter - 1 For Jockey Pump F3 Auto - On / Off Diesel Pump With

Battery Charger Control Circuit With Auto - Manual On/Off

On/Off Trip Indication On/Off Push Button C) Fabrication

Dully Powder Coated PO Red Colour, Fabricated From 14/16 SWG,GI

Sheet , IP-42 Protection,-Fixed Type Floor Mounted Cable Entry :

218 Supply, Installtion, Testing & Commissioing of Standard Response 100.000 No. 656.50

Sprinkler, Pendent Brass Sprinkler, Quartzoid Bulb type with crome

finish, nickel crome platde, K factor K-80, Temp.- 680C, 1/2" end

connection including resessed escutcheon. (UL Listed).

219 Box cutting the road surface to proper slope and camber for making a 863.000 Cu.Mt. 109.04

base for road work including removing the excavated stuff and

depositing on the road side slope as directed upto 50Mt.lead.

220 Filling in plinth with sand under floors including watering ramming, 227.000 Cu.Mt. 823.27

consolidating and dressing complete

221 Construction of granular sub-base 200 mm thick by providing coarse 858.000 Cu.Mt. 1440.26

graded machine crushed B.T. material satisfying MOST specification of

grading I (B.T. stone aggregate 53 mm to 26.5 mm 35 %, 26.5 to

mm - 45 % and 2.36 mm below - 20 % )including spreading in uniform

layer with motor grader on prepared surface, mixing by mix in place

method with rotavator at OMC and compacting with vibratory roller to

achieve the desired density etc. complete.

Item Description of Item (with brief specification and reference to book of Quantity Unit Rate in Total

No. specifications) Figures Amount

222 Providing and laying Water Bound macadam base course 150 mm thick 624.000 Cu.Mt. 1507.93

using machine crushed B.T. chips as per required gradation mixing with

required optimum quantity of water, conveying the mix to site of work,

spreading in to grade and camber with mechanical paver and

consolidation each layer with vibratory roller including cost of material

labour plant and equipment etc. complete.

223 Compaction and finishing of cement concrete road by trimix M.250 3957.000 Sq.Mt. 63.63

process providing extra Labour charges for the trimix vacume

dewatering service process on cement concrete road sutface by using

vacuum dewatering pump floater surface vibrator including making

groves and rough finish to surface including leveling etc complete.

224 Providing and fixing pre-cast concrete kerb stone of gray cement based 184.000 Rmt. 374.92

concrete block 30cm length,30cm height and 15cm thick of M250 grade

concret as per approved design and including excavation for fixing in

proper line and level,filling the joint with C:M 1:3 (1cement:3fine sand)

225 Steel work, welded in built up sections framed work including cutting, 28376.000 Kg. 91.08

hoisting, fixing in position and applying a priming coat of read lead paint

& two coat oil paint. (A)In beams and joists, channels angles Tees, flats,

with connecting plates or angle cleats as in main and cross beams. Hip

and jack rafters, purlins conneted to common rafters and the like..

Item Description of Item (with brief specification and reference to book of Quantity Unit Rate in Total

No. specifications) Figures Amount

226 Providing and fixing of Ridge flashing for roof panel shall be made out of 568.000 Sq.Mt. 520.43

0.5 mm thick pre coated GI sheet . The Precoated sheet shall be of

minimum 240 mpa steel grade confirming to IS 14246:1995 and shall

have zinc coating of minimum 120 gsm as per IS:277:1992 , 5-7 microns

epoxy primer on both side of the sheet and polyester top coat 15-18

micron. The PPGI Sheet shall have plastic protective guard film of

minimum 25 microns to avoid scratches during transportation. The ridge

shall be fixed to the steel members by pop rivet or self drilling/self

stitching fastners @ maximum 450 mm c/c along length of

capping/flashing etc complete .

227 Providing and fixing decorative entrance gate made out of cast iron and 3150.000 Kg. 173.72

various mild steel tabular section combination , the Ornamental

entrance gate should be fixed at compound wall including pattern and

die making , cutting , welding , grinding, fabrication , fixing in position at

compound wall with necessary pedestal, bearing block and other locking

arrangement. The entrance gate should be painted with two coats of

priming coat of paint, and two coat of oil paint etc complete. As per

detail design and instruction of architect.

228 Providing and fixing concertina coil fencing with punched tape 419.000 Rmt. 365.62

concertina coil 600 mm dia 10 mt openable length having 50 no rounds

per 6 mt length, upto 3mt height of wall with existing angle iron (50mm

x50mm x5mm )requird shaped As per Directed Engeenier in charge.

placed 2.4mt or 3.00mt apart and with 4 horizontal R.B.T. reinforced

barbed wire(3 mm) , stud tied with G.I. staples and G.I. clips to retain

horizontal, including necessary bolts or G.I.barbed wire tied to angle

iron, all complete as per direction of Engineer-in-charge, with reinforced

barbed tape (R.B.T.)/Spring core (2.5 mm thick) and weight

gm/meter at compound wall for ESR M4/ intakewell.

Item Description of Item (with brief specification and reference to book of Quantity Unit Rate in Total

No. specifications) Figures Amount

229 Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 working 50.000 Rmt. 339.04

pressure poluthene pipes of the following outside Dia. Low densidy,

complete with special falnge compression type fittings, wall clipsetc.

including making good the wall ceiling and floor.(G)110 mm

230 Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 working 60.000 Rmt. 696.90

pressure poluthene pipes of the following outside Dia. Low densidy,

complete with special falnge compression type fittings, wall clipsetc.

including making good the wall ceiling and floor.(G)160 mm

231 Providing junction for rain water juncton chamber of size 20.000 No. 9081.92

0.60x0.60x0.75m with excavation of size 1.96x1.96 m & 0.15m thick

c.c.1:2:4 bed concrete including brick masonary wall in CM 1:6 of 0.75m

height & 0.23m thick with 15mm thick cement plaster inside & outside

& 1.06x1.06 RCC (1:2:4) slab of thickness 0.15m with CRS steel and

0.60mx0.45m cast iron manhole cover with frame weight not less than

35 kg as per directed by Engineer-in-charge

232 Providing Filter chamber of Brick work in C:M 1:6 of size 2.06mx1.20m 4.000 No. 15470.17

x1.20m & excavation dimension of 2.66mx 1.81x1.35m including C.C

1:2:4 bed concrete of 0.15m thick including brick work in c.m 1:6 for

23cm thick wall including 15mm thick cement plaster inside & outside

with cement slurry & 10cm thick RCC 1:2:4 top cover with frame of

minimum weight of 35 kg & filling filter material kapchi in layers (25-

40mm & 10-20mm) & BT metal 40mm & sand as per directed by

Engineer-in-charge.

Item Description of Item (with brief specification and reference to book of Quantity Unit Rate in Total

No. specifications) Figures Amount

233 Providing Recharging pit of size 2.0m Dia.& 2.0m depth of water logging 2.000 No. 8242.61

with excavation filling the pit with gravel & sand in layers including

making 300mm dia bore depth of 4.5mt & above concrete with kapchi

in layers (25-40mm & 10-20mm) & BT metal 40mm & filling brick as

directed by Engineer-in-charge.

234 Filling in foundation and plinth with brick Bats in layers of 20cm. 22.000 Cu.Mt. 621.46

thickness including watering, remming and consolidating etc. complete

235 Half brick thick honey- comb brick work with common burnt clay 8.000 Sq.Mt. 322.96

building bricks having crushing strength not less than 35 Kg/Sq.Cm. (i) In

Cement Mortar 1:4 ( 1- Cement : 4 - coarse sand)

236 Providing 15mm thick cement plaster in single coat on Rough (Similar) 293.000 Sq.Mt. 215.85

side of single or half birck walls / concrete wall for interior plastering

and finished even and smooth in C M 1:4 (1 cement : 4 coarse sand)

with floting coat of neat cement slurry etc. comp. For Ground floor

237 Constructing brick masonry chamber for underground C.I. Inspection 10.000 No. 7180.44

chamber and bends with briocks having croshing strength not less than

35Kg. Cm2 in C.M. 1:5 C.I. cover with frame (Light duty) 455mm x

610mm intenal dimensions, total weight of cover with frame to be not

less than 38Kg. (Wt. of cover 23 Kg.) and Wt. of frame 15Kg. ) (R.C.C. top

slabe with 1:2:4 mix (1-cement :2- coarse sand :4-graded stone

aggregate 20mm size) foundation concrete 1:5:10 inside plaster 15mm

thick with cement mortar 1:3 finished smooth with a floating coat of

neat cement on walls and bed concrete etc. complete.(iii) Inside

dimensions 600mm x 850 mm and 450mm deep for pipe lines with

three or more inlets.

Item Description of Item (with brief specification and reference to book of Quantity Unit Rate in Total

No. specifications) Figures Amount

238 Providing and laying 150mm dia. stoneware pipes (to level or slopes) 40.000 Rmt. 531.18

and jointing with stiff mixture of Cement Mortar in proportion 1:1 Salt

glazed with testing of pipes and joints Including lime concrete 1:2:4 (1-

Lime putty :2-Fine sand : 4-Graded brick aggregates 40mm nominal size)

bedding for stoneware pipes of following internal diameters with

necessary formwork and curing complete.(B) 150mm dia. 450mm width

(166mm Ave. bed thickness)

239 Earthwork in cuting in all sorts of soil and soft murrum including 13702.000 Cu.Mt. 227.73

conveying and spreading the stuff, embankment as and where directed

within 200meters from the end of the cutting with all required lead and

lift. upto 500 Meters.

240 Earthwork for embankment including breaking clods, dressing with all 12004.000 Cu.Mt. 239.06

lead and lift (excluding watering and consolidation)(E) From Borrow area

within 3.0 Km. lead

241 Rolling of Earth work in layers with power roller including filling in 12004.000 Cu.Mt. 22.87

depressions which occure during the process.

242 Providing and laying 300 mm thick pucca rubble pitching in cement 850.000 Sq.Mt. 847.35

mortar 1:5 proportion with the surface pointed with cement mortar of

1:3 proportion including curing etc. complete for all leads & lifts.

For Canal on/off condition & Difficulty in Transportation

243 Providing and laying with G.S. Wire mesh mesh with standard size of 850.000 Sq.Mt. 328.25

mesh and Gage to carries the tension of rubble and fixing the mesh

with proper Potion and anti corrosion materails or coting the same all

respect to fixing completed.

244 Providing and laying geo fabric filter (GWF-50-300 catogary) over the 850.000 Sq.Mt. 70.32

excavated surface as per specification including stiching with overlap to

design profile as directed in tidal range etc. complete.

Item Description of Item (with brief specification and reference to book of Quantity Unit Rate in Total

No. specifications) Figures Amount

245 Providing and laying cement concrete 1:3:6 (1- Cement : 3- Coarse sand 5.000 Cu.Mt. 4100.60

: 6- crushed stone aggregates 20 mm nominal size) and curing complete

including cost of formwork in (A) Wall Caps / Coping

246 Supplying of well rotted FYM manure with all lead and Lift including 16.000 Cu.Mt. 378.75

spreading mixing dressing and rolling with hand roller etc. complete.

247 Scarifying the surface of Soil including spreading of DAP fertilizer mixing 1500.000 Sq.Mt. 26.26

with Soil properly levelling gand dressing of the plot

248 Supplying and planting Dibbing semi carpet lawn at distance of abour 15 2100.000 Sq.Mt. 20.20

cm x 15 cm after proper anti termite teratment amd rolling the seme by

hand roller amd wetering etc complete.

249 Bowing and developing flowering plants grown in nusery having 240.000 No. 30.30

approximate height 4 to 5 ft or Height ad per Landscaps Plan with

natural growith of soil packed in polithyline bag or Earthern pot.

Including organic & chemical fertilizer Pesticides, fungicides, hormones

& maintaining the plants up to three months as deserted. Bottol palm.

250 Bowing and developing flowering plants grown in nusery having 120.000 No. 60.60

approximate height 4 to 5 ft or Height ad per Landscaps Plan with

natural growith and nature colour planted in alump of soil packed in

polithyline bag or Earthern pot. Including organic & chemical fertilizer

pesticides, fungicides hormones & maintaining the plants uo to three

months as deserted Trinagle Plan.

251 Bowing and developing flowering plants grown in nusery having 240.000 No. 60.60

approximate height 4 to 5 ft or Height ad per Landscaps Plan with

natural growith and nature colour planted in alump of soil packed in

polithyline bag or Earthern pot. Including organic & chemical fertilizer

pesticides, fungicides hormones & maintaining the plants uo to three

months as Jasud

Item Description of Item (with brief specification and reference to book of Quantity Unit Rate in Total

No. specifications) Figures Amount

252 Bowing and developing flowering plants grown in nusery having 240.000 No. 75.75

approximate height 4 to 5 ft or Height ad per Landscaps Plan with

natural growith and nature colour planted in alump of soil packed in

polithyline bag or Earthern pot. Including organic & chemical fertilizer

pesticides, fungicides hormones & maintaining the plants uo to three

months as Croton

253 Bowing and developing flowering plants grown in nusery having 240.000 No. 10.10

approximate height 4 to 5 ft or Height ad per Landscaps Plan with

natural growith and nature colour planted in alump of soil packed in

polithyline bag or Earthern pot. Including organic & chemical fertilizer

pesticides, fungicides hormones & maintaining the plants uo to three

months as deserted green mahindi

254 Bowing and developing flowering plants grown in nusery having 240.000 No. 15.15

approximate height 4 to 5 ft or Height ad per Landscaps Plan with

natural growith and nature colour planted in alump of soil packed in

polithyline bag or Earthern pot. Including organic & chemical fertilizer

pesticides, fungicides hormones & maintaining the plants uo to three

months as deserted New block ficus.

255 Labour charges for planting various plantsafter proper anti termite 1320.000 No. 40.40

treatment in pits including placing property and filling the pit with

requred prepared mix soil and wetering and dispporting etc complete.

256 Maintance of the garder for 60 days after Complition of 3 month 1.000 Job 10100.00

stipulated period is completed for plantation o lawn and plants

including applying second round of proper antitermite tretment.

257 Providnig and fixing to wall ceiling and floor 80 Schedule Syntex / Astra 240.000 Rmt. 447.72

(CPCV) or equivalent of the following nominal bore tube fittings and

clamps the wall ceiling and floor (C) 40 mm

Item Description of Item (with brief specification and reference to book of Quantity Unit Rate in Total

No. specifications) Figures Amount

258 Providing and fixing consealed to wall, ceiling and floor 80 Schedule 240.000 Rmt. 208.80

Syntex / Astral (CPVC) or equivalent brand of the following nominal bore

tube fittings and clamps including Making goods the wall ceilling and

floor (A) 20 mm

259 Providing and fixing brass screw doen stop cock (A) 15 mm. Dia. 6.000 Rmt. 287.85

260 Rubber Hose pope 15 mm dia of approved brand and make 200.000 Rmt. 25.25

261 Providnig and fixing G I Nipple as directed. 6.000 No. 20.20

262 Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of 1.5 424.000 Pt. 485.81

sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated

multi strand copper wires up to 10 mtr length , in below type of pipe

erected with 6A Modular type switch / bell push & accessories and

earth continuity of following type, erected on PVC / Metallic/Wooden

box, single mounting base frame covered with textured/metallic/white

front plate modules erected on / in wall / ceiling as per pipe erected,

with necessary Lamp holder/ceiling rose / H.D.Connector as directed.(f)

with medium class Rigid PVC pipe and accessories erected concealed in

wall/ceiling completeCat. III

263 Point wiring for FAN with 2-1.5 sq.mm & earthwire of 1.5 sq.mm 149.000 Pt. 674.68

(Green) both are of .ISI marked 1.1 KV Grade FRLS PVC insulated

multistrand copper wires, in following type of pipe to be erected

concealed in / flushed on wall/ceiling complete with 6A Modular type

switch and hum free EME four or more step type electronic fan

regulator with separately mounted and accessories with earth

continuity of following type erected on PVC / Metallic box, single

mounting base frame covered with textured/metallic front plate

modules erected on / in wall / ceiling as per pipe erected. with

necessary ceiling rose / H.D.Connector as directed.(f) with medium class

Rigid PVC pipe and accessories erected concealed in wall/ceiling

complete Cat. III

Item Description of Item (with brief specification and reference to book of Quantity Unit Rate in Total

No. specifications) Figures Amount

264 Point wiring for on board Looped Plug with 6A Modular type switch & 5 95.000 Pt. 257.55

pin socket erected on PVC / Metallic/Wooden box, single mounting base

frame covered with textured / metallic/white front plate modules

erected on / in wall / ceiling with following type accessories

265 Providing following type of Modular Type Accessories mounted with pvc 37.000 Nos 160.59

/ metallic box, single mounting base frame covered with textured /

metallic front plate , modules erected with necessary connection. As

desired by Engineer In charge

(3) Two Pin/RJ-11 Telephone Socket

[A] For One Gang

266 (4) TV Co-axial Socket outlet 5.000 Nos 160.59

267 (8) Computer RJ-45 socket 94.000 Nos 160.59

268 (9) 16 Amp. SP one way switch 79.000 Nos 180.79

269 (10) 6/16Amp. Universal socket 79.000 Nos 199.98

270 Providing and erecting ISI mark Medium class RIGID PVC PIPES of 2000.000 Mtr. 33.33

following size complete to be erected on/in wall or ceiling erected with

necessary PVC fittings & Junction boxes fixed with adhesive solution &

Clamps with following dia of pipes, in approved manner as directed

Item Description of Item (with brief specification and reference to book of Quantity Unit Rate in Total

No. specifications) Figures Amount

272 Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI 3766.000 Mtr. 82.82

marked stranded Copper conductor wire in following type of pipe to be

erected concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper

conductor FRLS PVC insulated stranded wire of green colour for earth

continuity of following size (a) with medium class Rigid PVC pipe and

(b) 2 wire 2.5 sq. mm

273 providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI 325.000 Mtr. 112.11

marked stranded Copper conductor wire in following type of pipe to be

erected in / on wall / ceiling with 2.5 sq. mm copper conductor FRLS PVC

insulated stranded wire of green colour for earth continuity of following

size (a) with medium class Rigid PVC pipe and accessories

(a) 2 wire 4 sq. mm

(use earth wire of 4 sq.mm )

275 Mains with ISI marked, 1.5KV grade electrolyte multi stranded, annealed 60.000 Mtr. 142.41

copper conductor with heat resistant PVC insulated conforms to IS

IEC - 227 erected in existing pipe of following size (Specifically for

control panel, relays, power switchgears, motor starters & control

wiring) with required size of copper lugs, nuts and bolts if required.

(g) One wire 16.00 sq. mm

276 (k) One wire 70.00 sq. mm 5.000 Mtr. 669.63

277 Supplying and erecting Flexible PVC insulated multi strand multi core 1.1 150.000 Mtr. 46.46

kv grade ISI marked copper wires of following size to be erected as

(e) 1.50 Sq.mm 3 core round PVC sheathed

Item Description of Item (with brief specification and reference to book of Quantity Unit Rate in Total

No. specifications) Figures Amount

278 Providing & Erecting approved make following size of TV Co-axial 100.000 Mtr. 39.39

flexible cable comprising inner conductor of solid bare copper insulated

with Foam PE & Secondary conductor made of poly - Aluminium film

bonded Al. Braids @ suitable coverage overall sheathed with black PVC

279 Supplying & erecting approved make Telephone Cable electrolytic 1110.000 Mtr. 20.20

copper conductor PE insulation twisted in two pairs, & wrapped with

FRLS PVC tape & sheathed with FRLS PVC or HFFR outer Jacket suitable

for telephone wiring & confirming to C-DOT erected in existing pipe. of

following size of conductors & nos.of pairs. With necessary connections.

[A] Conductor Size 0.5 mm

280 (b) Armoured [Jelly Filled] 100.000 Mtr. 199.98

(2) Twenty Pairs

281 Supplying & erecting approved make LAN cable of following size in 2575.000 Mtr. 76.76

existing pipe as per direction

282 Providing & erecting main Distribution (MDF) indoor type, back 3.000 Nos 1368.55

mounted frame as per DoT standard approved with krone strips

(b) Suitable for 20 pair

Item Description of Item (with brief specification and reference to book of Quantity Unit Rate in Total

No. specifications) Figures Amount

283 Providing & erecting Switch board for Computer or electric apparatus 103.000 Nos 1133.22

consisting of following modular type accessories mounted with PVC /

Metallic concealed/open box with single mounting base frame covered

with textured/metallic /white front plate,modules erected with

necessary connections as directed

1 no. 6A/16A universal plug-switch combined.

3 nos. 6A Switch

3 nos. 6A 5 pin Plug

[B] For Modular Type Accessories

284 Supplying & erecting Approved make call bell indicator with buzzing 4.000 Nos 148.47

sound and Red light indicating lamp with Red light button to attend the

call suitable for 240 v 50 c/s supply to be erected.

285 Decorative call bell Ting-tong box type 250 volts complete erected 11.000 Nos 71.71

286 Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 304.000 Nos 373.70

Watt to 0.5 Watt assembled on single MCPCB, with housing used as a

heat sink shall be made of thick sheet Steel conforming to IS: 513/CRCA/

aluminium die cast powder coated and high U.V. & corrosion resistance

with diffuser with company mark/name 160V to 270V, Power Factor

more than 0.95, THD < 15%,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt ,LED

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description

have shown ranges of Wattage capacity of LED fittings.The Engineer

incharge may select any wattage capacity between the ranges

shown.)(A) Tube Light with integral driver(iv) 22-24 Watts, Surge -

2KV,IP-20, conventional 4 feet Cat. III

287 (i) 5-10 Watts, Surge-2 KV, IP-20, conventional 1 to 2 feet Cat. III 23.000 Nos 165.64

Item Description of Item (with brief specification and reference to book of Quantity Unit Rate in Total

No. specifications) Figures Amount

288 Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 6.000 Nos 758.51

Watt to 0.5 Watt assembled on single MCPCB, with housing used as a

heat sink shall be made of thick sheet Steel conforming to IS:

513/CRCA/aluminium pressure die cast powder coated and high U.V. &

corrosion resistance with diffuser housed in aluminium casted body

with company mark/name

160V to 270V,Power Factor more than 0.95, THD < 15 %,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description

have shown ranges of Wattage capacity of LED fittings.The Engineer

incharge may select any wattage capacity between the ranges shown.)

(A) Square/ Circular shaped Surface/Recessed Mount Downlight with

provision for spring loaded mounting clips complete.IP20(iv) 22-24

watts, Surge-2 KV Cat. III

289 (B) LED Panel Light with provision for Plane front frame with translucent 46.000 Nos 1794.77

cover fixed to housing complete.IP20(vi) 36 watts, 24" x 24", Surge- 2KV

Item Description of Item (with brief specification and reference to book of Quantity Unit Rate in Total

No. specifications) Figures Amount

290 Supplying and erecting LED street light / Flood light fittings with High 20.000 Nos 3345.12

power White LEDs wattage of 3 Watt and above assembled on single

MCPCB, efficiency more than 130 lm/w and corrosion free High pressure

die cast aluminum housing with smooth finish powder coated and heat

sink extruded aluminium with diffuser and Polycarbonate optics/ lenses,

with toughened glass with company mark/name engraved or embossed

160 to 270 V,Power Factor more than 0.95, THD < 10 %, CCT 3000 K to

5700K,Uniformity ratio >0.45, Luminaire efficacy> 100 lumens/watt .

LED driver efficiency > 85 %.( fittings required LM-79 & LM-80

certificates)(NOTE: Below description have shown ranges of Wattage

capacity of LED fittings.The Engineer incharge may select any wattage

capacity between the ranges shown.)

(A) Street Light (IP-65), Surge protection -4KV integral and ,Light must

have 440VAC line supply with over-voltage protection.

(i) above 36 to 48 watts Cat-lll

291 (B) Flood Light (IP-65), Surge protection -4KV integral and ,Light must 10.000 Nos 6088.28

have 440VAC line supply with over-voltage protection.

(iii) Above 60 to 90 watts

292 (C) Post Top Lantern LED fitting comprises of finish cast aluminum spigot 4.000 Nos 4092.52

and spun aluminum canopy fixed with opal polycarbonate, pipe

arrangement for vertical mounting driver and accessories wired upto

terminal block.IP

(i)20- 30W Cat-lll

293 providing and erecting Miniature circuit breaker single pole 6A to 25A 324.000 Ea. 112.11

suitable to operate on 240 V A.C. system and having breaking capacity

10 KA to be erected in existing box. confirming to IS 8828/1996 with ISI

Item Description of Item (with brief specification and reference to book of Quantity Unit Rate in Total

No. specifications) Figures Amount

294 Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load 14.000 Ea. 737.30

(C Curve) having 10KA breaking capacity & confirms to IS :8828 in

existing box having following capacity

295 Providing and erecting Sheet Steel powder coated MCB distribution 2.000 Ea. 2913.85

board - flush / surface mounted fitted with busbar, neutral link, earth

bar and DIN rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without

MCB to house appropriate nos. of MCBs.(The DBs should be used of

same company of MCB to be used) suitable for

(B) three phase incoming and single phase horizontal type outgoing Per

phase isolation type (PPI)

(b) sheet steel double door

297 providing and erecting Approved make RCCBs conforming to IS: 12640 30.000 Ea. 2235.13

and having sensitivity of 30 mA and Short Circuit withstand capacity of

10 KA and suitable for operation on single phase 240 V,50Hz. having

characteristic of quick action & tripping with all advance feature & do

not incorporate any electronic component. for following Max. rating

erected as directed

(ii) 40Amps. DP

298 Pproviding and erecting Approved make Four pole moulded case circuit 14.000 Ea. 6173.12

breaker having breaking capacity ICU of 25 KA. at 415 V,having normal

current rating up to 25 A to 100A. with Fixed thermal & magnetic

release suitable to work on A.C. supply 50 c/s. with all internal

connections, spreader tinned copper & complete erected in existing

G.M.S. housing.

ICS=100% of ICU only Cat III

Item Description of Item (with brief specification and reference to book of Quantity Unit Rate in Total

No. specifications) Figures Amount

299 Providing and erecting Approved make Four pole moulded case circuit 5.000 Ea. 16221.61

breaker having breaking capacity ICU of 35 KA. at 415 V. having Normal

current rating 200A.with variable Thermal & magnetic release suitable

to work on A.C.supply 50 c/s. with all internal connections, spreader

tinned copper & complete erected in existing 16 G.M.S.housing

ICS=100% of ICU only Cat III

300 Providing and erecting Approved make Four pole moulded case circuit 1.000 Ea. 20946.39

breaker having breaking capacity ICU of 35 KA. and above at 415 V .

having normal current rating 250A. with variable thermal & magnetic

release suitable to work on A.C.supply 50 c/s. with all internal

connections, spreader tinned copper & complete erected in existing

G.M.S. housing.

ICS=100% of ICU only Cat III

301 Providing and erecting Approved make Four pole moulded case circuit 1.000 Ea. 23041.03

breaker having breaking capacity ICU of 35 KA. and above at 415 V .

having normal current rating 250A. with variable thermal & magnetic

release suitable to work on A.C.supply 50 c/s. with all internal

connections, spreader tinned copper & complete erected in existing

G.M.S. housing.

ICS=100% of ICU only Cat IIINote:-1 Add Rs. 10% extra for

housing/Encloser of MCCB for Item No 3-4-1 to 3-4-12 (The Enclosures

should be used of same company of MCCBs to be used)

302 Providing and erecting Approved make Earth fault Relay suitable to 1.000 Ea. 5415.62

mount with inter connection suitable to following size of moulded case

circuit breaker having CT ratio & MCCB rating as following along with

shunt trip 220V AC. with all internal connections & complete erected in

existing M.S.housing..

Item Description of Item (with brief specification and reference to book of Quantity Unit Rate in Total

No. specifications) Figures Amount

303 Supplying & erecting approved make Four Pole 415V change over switch 1.000 Ea. 13353.21

interior for panel mounting with operating mechanism A.C.23 duty

confirming to IS for

(E)250A / 320A Cat-lll

304 Supplying and erecting triple pole & neutral 440V / 500V panel 0.500 Rn.Mtr 1961.42

mounting Copper Busbars with four equal Nos. of electrolyte bus having

current density not more than 1.6 Amp. / sq.mm (Rated current / cross

section area) duly wrapped with colour insulating tape for phase

sequence of following current carrying capacity, erected with necessary

bus bar supports /insulators, main cable socket to each bar, erected in

existing cubical panel with necessary connections.

(A) Suitable for 100 Amp. Capacity

305 (B) Suitable for 200 Amp. capacity 1.000 Rn.Mtr 3202.71

306 (C) Suitable for 300 Amp. capacity 0.500 Rn.Mtr 4909.62

307 Providing and erecting Annealed bare Copper wire 8 to 16 SWG. 70.000 KG 794.87

308 Providing and erecting Pipe type earthing having 150 cms.long and 2.5 20.000 Ea. 368.65

cms. dia. galvanised iron pipe with coupling and buch buried in specially

prepared earth pit complete with necessary 8 SWG earth wire.

309 For using salt and charcoal / coke as required for pipe type earthing. 20.000 Ea. 171.70

Item Description of Item (with brief specification and reference to book of Quantity Unit Rate in Total

No. specifications) Figures Amount

310 Supplying & erecting earth pit of minimum bore dia.150mm size 7.000 Ea. 4591.46

approved make Earthing Electrode consisting Pipe-in-Pipe Technology as

per IS 3043-1987 made of corrosion free hot dipped G.I.Pipes having

Outer pipe dia of 50mm having 80-200 Micron galvanising, Inner pipe

dia of 25 mm having 200-250 Micron galvanising, connection terminal

dia of 12mm with constant ohmic value surrounded by highly

conductive compound with high charge dissipation suitable for

following type of applications with chamber and heavy duty cover.

(A)(approved make OEM has to submit test certificate including value

of earth resistance of installation duly stamped and signed by agency

and officer Incharge has to ensure the value of earthing resistane

mentioned in test Certificate) & having back filling compound of (B)

Inner chemical (CCM Compound)- Resistivity:- 0.2 ohm / meter testing

as per IEC 62561-2017, Voltage drop:- < 1 volt at no load & dry form,

Sulphar content:- <2%(C) Back fill Compound :- Earthing compound

should be capable to retain moisture for long time Necessary test

report must be submitted by Agency.

(a) For Electrical Installation up to 440V in normal soil

Length of pipe - 1 Mtr

Back filling compound - 1 Nos Bag of 15 Kg.

Item Description of Item (with brief specification and reference to book of Quantity Unit Rate in Total

No. specifications) Figures Amount

311 Providing & erecting weather proof, dust & vermin proof, floor mounted 5.100 Sq.Mtr 10468.65

front operated indoor type cubical panel board necessary IP-42 and

above protection as per approval from engineer incharge made from

SWG thick CRC M.S. sheet for outer body & doors, 16 SWG thick CRC

M.S.sheet for internal partitions with necessary accesories , supporting

angles/ flats channel including cutting, bending, drilling, welding,

riveting with internal partitions & cable alley as per requirements &

instruction of engineer-in-charge with erection of supplied switch gears,

BUSBARS, suitable size of inter connecting PVC copper wire / copper-

aluminium strips, rubber grommets, rib, bakelite control fuses/MCB for

measuring instruments, earth bus & earth bolts, foundation flange -

bolts-base Plates, sufficient nos. of hinged doors, handles with locking

arrangement and rubber gasket,heavy duty end terminal

connection,danger notice board,necessary ventilation,earthing strip

complete. The Panel shall be painted with epoxy powder coating.

(The rates excludes the cost of switchgears, bus bars, inter connecting

mains & Copper Aluminium strips, meters, Fuses etc. The dimension

shall be measured excluding base beams) The panel shall be supplied

with following approved manufacturers with following size.

(B) locally fabricated panel board

(i) with 350 mm depth

312 Providing , erecting , fabricating the M.S. structure as per requirement 300.000 Kg. 77.77

on site incorporating proper size of M.S. angles, flats, bars, channels,

sections complete with cutting, welding, grinding & finishing duly

painted with one coat of red oxide with erection on site as per direction

of engineer in charge with necessary grouting, cementing, plastering &

finishing complete.

Item Description of Item (with brief specification and reference to book of Quantity Unit Rate in Total

No. specifications) Figures Amount

313 Supplying and erecting approved make panel mounting type Digital 4.000 Ea. 1275.63

Voltmeter having 3 digits LED display, 0 to 750 AC Volts range erected

on existing panel board with all connection, wiring etc .with

manufacturers calibration certificate.

314 Supplying and erecting approved make panel mounting type Digital 4.000 Ea. 1558.43

Ammeter having 3 digits LED display, external CT operated, calibrated

for 0 to 1000 Amps suitable to operate on 500 Volt AC , erected on

existing panel board with all connection, wiring etc .with manufacturers

calibration certificate.

315 Supplying and erecting Ammeter / Voltmeter selector switch for 3 4.000 Ea. 317.14

phase AC Supply 500 V on existing panel board with necessary

316 Providing & erecting L.T. Current Transformer with bar primary 50/5 to 12.000 Ea. 274.72

1000/5 ratio 15 VA burden erected in existing CRCA box duly secured

with insulating materials connected to the meter

317 Providing and erecting metallic vitrified danger notice board as per 4.000 Ea. 69.69

language suggested by engineer incharge for MEDIUM VOLTAGE

installation to be erected as per IS-2551.

318 Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable 150.000 Mtr. 183.82

multistrand Aluminium conductor for 1.1 KV. to be laid on wall with

necessary clamps or in existing trench / pipe of following size of cables

(A) 3 1/2 core 25 Sq. mm ( 16 Sq. mm 1/2 core)

321 Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable 200.000 Mtr. 126.25

multistrand / Solid Aluminium conductor for 1.1 KV. to be laid on wall

with necessary clamps or in existing trench / pipe of following size of

(B) 4 core 6 Sq. mm

Item Description of Item (with brief specification and reference to book of Quantity Unit Rate in Total

No. specifications) Figures Amount

322 Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable 580.000 Mtr. 153.52

multistrand Aluminium conductor for 1.1 KV. to be laid on wall with

necessary clamps or in existing trench / pipe of following size of cables

(A) 4 core 16 Sq. mm

323 Making trench in soft soil of suitable width of 90 cm deep for laying 850.000 Mtr. 55.55

cable or locating the fault all over the run and back filling the same and

making the surface as normal ground.

324 Making trench in Hard Murrum / Tar Road of suitable width of 90 cm or 20.000 Mtr. 74.74

required depth for laying any size of cable or locating the fault all over

the run and back filling the same and making the surface as normal

325 (B) If additional machinery like hammer driller or JCB use [Add] 10.000 Mtr. 357.54

326 Drilling the road without breaking the road surface (Asphalt) for laying 20.000 Mtr. 492.88

of cable for feeding power supply by making up to following size of

holes at both ends complete.

(A) Up to 100 mm bore dia

327 Supplying following size of Light duty “A” Class G.I . Pipe & erecting as 40.000 Mtr. 172.71

directed by Engineer-in-charge.

328 Providing & laying approved make Double walled corrugated pipes 850.000 Mtr. 62.62

(DWC) of polyethylene(conforming to IS 14930 II )with necessary

connecting accessories of same material at required depth in existing

trench for laying of cable. below ground / road surface for enclosing

329 Providing & laying approved make ISI marked Rigid PVC pipe having 20.000 Mtr. 171.70

6Kg / cm2 (Class-3) to be erected at road crossing on or floor as directed

for laying of cable. The pipes as following size of dia & weight per 6 mtr.

330 Providing and, fixing heavy duty flange type brass cable gland with 20.000 Ea. 38.38

rubber ring for PVC insulated armoured cable complete with out going

tails, insulating tape etc for following size of cables.

Item Description of Item (with brief specification and reference to book of Quantity Unit Rate in Total

No. specifications) Figures Amount

331 Providing and, fixing heavy duty flange type brass cable gland with 4.000 Ea. 66.66

rubber ring for PVC insulated armoured cable complete with out going

tails, insulating tape etc for following size of cables.

(A) 3 & 1/2 / 4 core 25 Sq. mm

334 Solderless crimping type Aluminium lugs conforming to IS suitable for 80.000 Ea. 6.06

cable of following size evenly crimped with high pressure tool &

connected to switchgear terminals with brass/cadmium plated nut bolts

in an approved manner.

339 Providing and fixing approved make Perforated C type cable tray. Made 130.000 Rn.Mtr 622.16

from sheet steel. The cable tray should be single or double bended as

per required and as per IS 2062/1079 and shall be coated with hot dip

galvanizing as per IS 2629/4759. with max 17.5% perforation with

coupler plate / Fish plate and GI hardware like nut - bolt and washers

etc. erection with necessary support( included) as per Specification and

as per instruction of engineer in charge..

340 Providing and fixing approved make 'T' Junction for Perforated C type 3.000 Ea. 291.89

cable tray. Made from sheet steel. The Junction should be bended as

per IS 2062/1079 and shall be coated with hot dip galvanizing as per IS

2629/4759. with max 17.5% perforation with coupler plate / Fish plate

and GI hardware like nut - bolt and washers etc. erected on existing

support as per Specification and as per instruction of engineer in charge

of following size

Item Description of Item (with brief specification and reference to book of Quantity Unit Rate in Total

No. specifications) Figures Amount

341 Providing and fixing approved make '90° Elbow' for Perforated C type 3.000 Ea. 245.43

cable tray. Made from sheet steel. The Junction should be bended as

per IS 2062/1079 and shall be coated with hot dip galvanizing as per IS

2629/4759. with coupler plate / Fish plate and GI hardware like nut -

bolt and washers etc. erected on existing support as per Specification

and as per instruction of engineer in charge..

342 Providing & erecting Approved make Power Saving 50 Watt Ceiling Fan 149.000 Ea. 1948.29

with double ball bearing ISI mark with Condenser 230 volt A.C. 50 Hz

1200 mm sweep complete having 3blades with aluminium blades with

canopy & 30 cm. down rod erected with earthing.(Make shall be

approved by Engineer in charge))

343 Supplying and erecting 19 / 20 mm. nominal bore Medium Class M.S. 149.000 mtr. 108.07

Pipe down rod erected duly painted for fan complete with necessary 24/

O.20, 3 core flexible wire with earthing.

344 Supplying & erecting fan hook box of 10 mm M.S. round bar bounded 149.000 Ea. 108.07

to the RCC bars up to 50mm length each side and pierced through a

Gauge M.S. box / Heavy Duty PVC box complete erected concealed in

Ceiling with necessary finishing.

345 Providing 2.5mm.thick laminated acrylic sheet to cover the fan hook or 149.000 Ea. 18.18

346 Supplying & erecting single phase approved make industrial exhaust fan 30.000 Ea. 2054.34

suitable for medium duty ring mounted low noise operation suitable for

medium duty having following dia size and maximum speed in RPM

[A] 305 mm dia 900 RPM Cat.II

347 Providing recess in wall or window frame suitable for erection of 30.000 Ea. 189.88

Exhaust fan complete with plastering and colour washing to match the

colour of the wall or window complete with expanded metal in order to

render the fitting in accessible and the room water-proof.

Item Description of Item (with brief specification and reference to book of Quantity Unit Rate in Total

No. specifications) Figures Amount

348 Supplying and erecting approved make Octagonal pole made from HR 20.000 Ea. 8192.11

sheet steel. The pole should be made as per IS. and shall be coated with

hot dip galvanizing as per IS 2629/2633/4759, suitable suspend local

wind speed with integral Junction box consist of terminal plate of min

6mm Hylam sheet, standard profile 35mmX7.5mm Din-Rail for MCB

Mounting, stud type terminal and arrangement for cable termination to

be erected With Suitable foundation (Included) as per details given by

manufacturer considering site requirement.

(D) 6 Mtr. Long 70 mm Top X 135 mm bottom dia, 3 mm thickness with

200mmX200mmX12mm base plate, 4-M20 Bolts and 600mm long with

necessary G.I. J Bolts .Approx Pole weight 59 kg

349 Supplying & erecting approved make SMC press moulded composite 10.000 Ea. 898.90

FRP. loop-in, loop-out approx. 2mm thick box complete with Bakelite

connector strip 5way(3P+N+E),DIN rail for mounting mob & hinged

doors as per requirement having locking arrangements with mounting

clamp with nuts, bolts & washers suitable for erection on pole with

cable clamps& earth bolt of following size of box.

350 Providing and erecting Street Light pole bracket comprising main B Class 20.000 Ea. 683.77

GI pipe of 4.2 cm/require outside dia. complete with suitable B Class G.I.

sleeve tubing of approx. 45cms.length and suitable for 76.5 mm /80mm

/ required size of pole top having sufficient fasteners for fixing the

brackets and having spread of 1.5.mtr. length with 110 deg.with vertical

plane & suitable welded stays, reducer and with check nuts complete

painted with one coat of Red oxide / PU base primer and two coats of

Aluminium / PU paint. paint with following nos of arms.

Item Description of Item (with brief specification and reference to book of Quantity Unit Rate in Total

No. specifications) Figures Amount

351 Supplying & erecting IP 55 grade following size section pillar fabricated 1.000 Ea. 3595.60

from joint less M.S. Sheet with angle iron legs made from jointless M.S.

Angle with cable clamps to be buried in ground to have appropriate

erection to work uniform until erected with cement concrete

foundation and 45 cm high bricks work finishing with plaster etc. hinged

double door internally supported on both side, with internal and

outside looking arrangement with look and keys in duplicate 35 x 35 x

mm M.S. Angle of Two Nos. one is welded and other with nut and bolt

for erecting Bakelite sheet. Painting the Section Pillar inside and out

side with three tank powder coated paint. section pillar roof should be

without joint with water leakage proof & tested as per IP 55 test &

followed by IS 2147 of

(B) 75 X 60 X 45 cm section pillar fabricated from 16 Gauge MS Sheet

with angle iron legs 45 cm long made from 35 X 35 X 5 mm thick MS

352 Supplying and erecting HYLAM sheet on existing angle iron frame.for 0.500 Sq.Mtr 1927.08

following thickness

353 Supplying & erecting approved make Digital time switch having lithium 1.000 Ea. 3168.37

cell 6 years operative and operate battery backup 1 channel day clock

with 14 memory programme, suitable to operate on 240V + 5%, 16A

with, floating contacts Minimum switching setup time 1 minimum & LCD

display. Also comprised permanent ON/OFF switching. Programming

switches & housed in fire proof thermoplastic enclosure & transparent

cover erected as required with necessary connection erected as

354 Supplying & erecting power contactor ,AC3 duty for time switch 1.000 Ea. 2782.55

complete erected as per direction Cat III

(D) 4 pole 440V 40 Amp.

Item Description of Item (with brief specification and reference to book of Quantity Unit Rate in Total

No. specifications) Figures Amount

355 Providing and erecting Small EPABX System with In Built 4 Port Voice 1.000 Ea. 99835.47

Mail [[Approved by Competent Authority i.e. not Below the rank of

Executive Engineer ]

[D] No. Extension - 48 , No. of Junction -8 , No. of expandable ports -

125 , Operators Console -01 Compatible - ISDN

356 Supplying & erecting push button type telephone instrument having 37.000 Ea. 898.90

speaker phone Caller ID & speaker phone with one touch memory

(min.6 nos.)& 99 memories with display system Single line [[Approved

by Competent Authority i.e. not Below the rank of Executive Engineer ]

357 SITC of Delegate Unit shall enable delegates to speak and listen to the 14.000 Ea. 32024.07

proceedings via a loudspeaker or headphones. The unit shall include a

microphone with a red indicator ring, which shall illuminate when the

microphone is on.

The unit shall include a ‘Possible To Speak’ white LED indicator, which

shall illuminate showing the delegate when it is possible to switch on

the microphone.

To prevent acoustic feedback, the built-in loudspeaker shall be muted

when the microphone is on, and/or the headphones are connected.

Two 3.5 mm stereo headphone sockets (wired for mono) shall allow two

pairs of headphones to be connected, enabling two delegates to

simultaneously use the unit.

The headphone volume level shall be adjustable on the unit for

maximum comfort. It shall also be possible to connect a tape recorder

to one headphone socket, and use the other headphone socket to listen

to the proceedings.

[Approved by Competent Authority i.e. not Below the rank of Executive

Item Description of Item (with brief specification and reference to book of Quantity Unit Rate in Total

No. specifications) Figures Amount

358 SITC of Chairman Unit shall enable the user to function as chairman of a 1.000 Ea. 38726.43

conference or meeting. It shall be similar in appearance to the Delegate

Unit, and shall also include a ‘chairman priority button.When pressed,

the priority button shall cause all currently active delegate microphones

to be temporarily or permanently muted, allowing the chairman to take

control of the meeting.

To prevent acoustic feedback, the built-in loudspeaker shall be muted

when the microphone is on, and/or the headphones are connected.

An optional chime shall be selectable to precede chairman priority calls.

[Approved by Competent Authority i.e. not Below the rank of Executive

359 SITC of CONTROL UNIT RECORDER DAFS Plug-and-play functionality for 1.000 Ea. 180086.03

quick and easy connection of up to 80 Discussion Devices Intuitive web

browser interface control for advanced configuration and control

Built‑in MP3 recorder with internal memory and USB recording Built‑in

Digital Acoustic Feedback Suppression (DAFS) for ensuring superior

speech intelligibility On-board support for automatic HD camera control

[Approved by Competent Authority i.e. not Below the rank of Executive

360 SITC of Prefabricated to reduce installation time 10.000 Ea. 9124.34

Low smoke zero halogen to comply with safety and environmental

standards 10 Meter

[Approved by Competent Authority i.e. not Below the rank of Executive

361 SITC of Mixer amplifier, 240W 1.000 Ea. 22000.83

[Approved by Competent Authority i.e. not Below the rank of Executive

Item Description of Item (with brief specification and reference to book of Quantity Unit Rate in Total

No. specifications) Figures Amount

362 SITC of Cabinet loudspeaker, 30W, black 6.000 Ea. 13399.67

High-fidelity music and speech reproduction

Selectable 8 ohm, 70 V and 100 V inputs

Compact yet robust ABS enclosure

Supplied with adjustable mounting bracket

Complies with international installation and safety regulations

[Approved by Competent Authority i.e. not Below the rank of Executive

363 SITC of 3LCD Lamp based projector having wxga (1280x800) or better 1.000 Ea. 33895.60

resolution with minimum white brightness of 3800 lumens and color

brightness of 3800 lumens. The projector should have minimum

1HDMI,1VGA input. Having contrast ratio of 15000:1 or more. the

projector should have auto vertical key stone correction of +/-

degree and Manual Horizontal of +/-30 degree. the projector should

have optical lens, throw ratio 1.30-1.56:1. Zoom Factor of 1.2. Lens

focus Manual having focal length 16.9mm to 20.28mm. projector should

have features like AV mute slide, quick corner and split function and

should support wireless functionality with inbuilt wifi or wifi dongle.

[Approved by Competent Authority i.e. not Below the rank of Executive

364 SITC of universal Projector mounting kit, with necessary grouting, 1.000 Ea. 6848.81

fasteners etc. with adjustable height and suitable for all types of

projectors. [Approved by Competent Authority i.e. not Below the rank

of Executive Engineer ]

365 SITC of 84 inch Self Lock MW (6 x 4) Instalock Slow Retraction Screen, 1.000 Ea. 3379.46

Aspect Ratio-4:3 [Approved by Competent Authority i.e. not Below the

rank of Executive Engineer ]

366 SITC of CAT6 UTP 23AWG Solid: Per Meter 300.000 Mtr. 43.43

[Approved by Competent Authority i.e. not Below the rank of Executive

Item Description of Item (with brief specification and reference to book of Quantity Unit Rate in Total

No. specifications) Figures Amount

367 SITC of 2-Core Shielded PVC Coated Oxygen-Free Microphone Cable, 300.000 Mtr. 115.55

Cross-Sectional Area 24AWG, DC Resistance - 35 /Ω Km, Operating

Voltage - 300 V, Operating Temperature ,-20⁰ C to 70⁰ C, Make :-

Crestron/Extron/Krystal/Kramer

368 SITC of 2-core 1.5 sqmm PVC-coated twisted oxygen-free speaker cable, 130.000 Mtr. 106.99

Cross Sectional Area -1.5Sqmm, Insulation Dia. - 2.90mm, DC resistance

@20 °C – Conductor -13.7.0 Ω / Km, Operating Temperature ,-20⁰ C to

70⁰ C.Make :- Crestron/Extron/Krystal/Kramer

369 Providing and erecting Galvanised iron floor mounting height adjustable 83.000 Nos 1792.90

junction box having size of 150x150x65-90mm.

370 Supplying and erecting insulated pair of soft copper tubing open or 70.000 Rn.Mtr 965.56

concealed including power and control cable,necessary PVC drain pipes

for Split AC machine up to 4 TR capacity

371 SITC of 22U Wall Mount Network Rack with Front Acrylic Door with lock 1.000 Ea. 27817.94

& keys, Ventilated Top and Bottom., Accessories can be added are

Power Strip, Cooling Fan, Cantilever Tray, Cable Manager, Mounting

Hardware, Size(WxDxH) 600x600x583 Make :- Rittal, elixir, valrack

372 Providing and erecting Inverter based approved make split air- 14.000 Ea. 56353.96

conditioning unit consisting of condensing unit with variable speed fan

motor, inverter type hermetically sealed rotary compressor with

accessories etc. duly connected separately erected evaporating unit and

blower motor with its accessories by means of extra supplied proper

insulated copper tubing,drain PVC pipes suitable for ( cost includes Eco

Friendly green gas charging and 15A plug top & Remote Control & MS

Stand) with necessary core cutting.

(1)For ISEER Range (KWH/KWH)(3.1 to 3.99)

(C) for 1.7 to 2 ton capacity - Premium Cat.

Item Description of Item (with brief specification and reference to book of Quantity Unit Rate in Total

No. specifications) Figures Amount

373 Providing & erecting water cooler having storage capacity 150 Ltr. & 6.000 Ea. 55893.40

cooling capacity 150 Ltr.per hour @ an ambient temp of 45˚ C. The

outlet temp. of the water should drop by 15˚C within a hour, The water

cooler should be comprising of hermetically sealed compressor, fan

motor, condensing unit, water tank surrounded by evaporating, coil,

thermostats, relay etc.complete with necessary inlet & outlet

connection. The body of water cooler will be made from Stainless Steel.

374 Supplying & erecting 5 stage single reverse osmosis water purification 6.000 Ea. 29187.99

system with M.S. powder coated frame, prefilter housing with 'O' ring

presediment filter GAC filter, carbon filter suitable buster DC pump

capacity 80 psi, mention with 40 psi inline type post carbon filter auto

low & high pressure switches with following size of storage tank & LPH

capacity & erected as directed

375 Providing & erecting open well horizontal mono block pump set with 2.000 Ea. 18746.61

cast iron body, complete for three phase submersible motor having

376 Supplying & erecting approved make motor control cubical panel 2.000 Ea. 7722.46

(Direct - on - line) made from 16 G. CRCA sheet duly epoxy powder

painted inside and outside with hinged doors and locking, arrangement

consisting of suitable size of ON- OFF isolator (AC - 3/23duty) main

fuses, single phasing preventer, indicating lamps for R- Y - B phases,

overload relay, Automatic water level controller, Ammeter, Voltmeter

each with two way selector switch incoming, wires duly socket crimped,

main contactor & overload relay, start - stop push buttons, to be

erected on angle iron frame grouted on wall as directed. The isolator,

overload relay & contactors will be of L & T, Siemens or BCH make only.

Item Description of Item (with brief specification and reference to book of Quantity Unit Rate in Total

No. specifications) Figures Amount

377 Lowering of submersible motor pump set at the depth of following 2.000 per job 856.48

,complete with required. Nos. and size of casing pipes erected by means

of proper chain pulley block & pipe wrenches after checking of threads

of each pipe with coupling to take the load of the pump set and pipe

assembly filled up with water

(D)For Open well Horizontal submersible pump set for sump well

378 Providing and erecting ISI marked PVC insulated PVC Sheathed Flat 60.000 Mtr. 146.45

flexible Submersible copper cable approved make of following Size.

(C) 3 Core x 4 Sq. mm

379 Providing Water proof straight Joint in PVC insulated flat flexible copper 4.000 Ea. 189.88

cable by using insulating material, water proofing material, & making

the joint complete.

380 Supplying & erecting UPVC heavy duty Flanges with rubber packing and 4.000 Ea. 158.57

hardware materials for pipe connections suitable for

381 Supplying and erecting ISI marked sluice valve at position with necessary 2.000 Ea. 803.96

material for following size of pipe diameter.

382 Supplying, & erecting C.I. swing, check type non-return (Reflux) Valve - 2.000 Ea. 1020.10

ISI marked suitable for following size

383 Supplying of following size of HEAVY UPVC column pipe with coupler 60.000 Mtr. 359.56

Item Description of Item (with brief specification and reference to book of Quantity Unit Rate in Total

No. specifications) Figures Amount

384 Supply of following size of TOP & BOTTOM accessories i.e. Adaptor set 2.000 per job 1489.75

(CI) long, pump guard set, starter pipe Rubber ring for submersible

pump & UPVC column pipe as directed by Engineer - in - charge with

necessary plumbing as desired.

385 Supplying and erecting, commissioning and testing of Diesel Generating 1.000 Ea. 968209.23

set confirming to IS: 4722:1968 & BS:5514 having continuous rating,

phase, 415 volts, 50 cycles A.C. supply comprising of a totally enclosed

air/water cooled diesel engine with multi-cylinders developing suitable

BHP not less than following capacity at 1500 RPM with 10% overload

for one hour in 24 hours with standard accessories like fly wheel,

lubricating oil cooler, "A" class governor, heavy duty fuel wheel and

lubricating oil filter, oil bath air filler, lubricating oil pressure gauge, end

exhaust manifold, standard set of tools with adjustable spanners, screw

drivers, cylinder head to cover, joint cylinder head to exhaust, element

lube oil filter, 12 / 24 volts electric starting equipment complete with

standard heavy duty battery, dynamo, cut-outs, ammeter, necessary

wiring, pressure gauge, starter etc and heavy duty Residential type

exhaust silencer (With DEF System) and vertical hot air duct both

logged with asbestos rope, save oil trays, exhaust piping of required

length, standard wall/floor mounted fuel with level indicator and piping

and drip proof alternator, self excited, self regulated, screen protected,

with excitation system, capable of delivering the rated system output at

415 volts, 3 phase, 0.8 PF, 50 Hz, 4 wire, running at 1500 RPM,

conforming to IS-4722- 1968 with voltage regulation +/- 5% of rated

voltage from no load to full load. Both the engine and alternator fitted

on a common fabricated steel base plate with antivibration mounting

engine and alternator both connected to each other by flexible flange

coupling and with floor/wall mounted control panel box comprising of

voltmeter ammeter, selector switches, ACB / MCCB / MCB of adequate

Item Description of Item (with brief specification and reference to book of Quantity Unit Rate in Total

No. specifications) Figures Amount

386 Providing & erecting approved make AMF control panel suitable for 1.000 Ea. 121201.01

following size of 3 phase, 415 V., 50 cycles, A.C. diesel generating set

complete of scope as detailed below:

1) Power module: A pair of electromechanically interlocked contactors

(for mains & generator) Overload relay for generator contactor Neutral

contactor for mains and generator Power socket for connections.

2) Control and metering module: Line voltage monitor. Generator

voltage monitor Ammeter 3 items attempt start facility. Air circuit

breakers/MCB/MCCB of suitable rating for auto/manual operation.

Auto/manual switch. Emergency stop push buttons. Manual start push

button. frequency meter. Engine hour meter. Two earthing studs.

3) Protection module: The engine shutdown in the unlikely event of Low

lube oil pressure High cylinder head temperature. V belt failure.

4) Indicators with alarm Load on generator.

5) Indicators Load on mains Engine fails to start . Emergency stop

battery charger.

The AMF Panel of following capacity

(C) AMF Control Panel for100 KVA/125 KVA3 phase DG Set

Item Description of Item (with brief specification and reference to book of Quantity Unit Rate in Total

No. specifications) Figures Amount

387 Supplying, Erecting, Testing & Commissioning the passenger / stretcher 1.000 Ea. 1046850.86

lift having following main features:

(A) GENERAL DESCRIPTION OF LIFTS.

[1] GEAR LESS LIFT DRIVE (MRL) comprising of High Starting torque Lift

phase 440 V A. C. Permanent Magnet Synchronous motor of proper

rating with high efficiency shall be used.

[2] Micro processor based / PLC, ACVVVF, vector control drive with

encoder feedback closed loop system shall be used for lift car and door

operation which shall be full collective selective operation hall call

demand response, UP/DOWN hall stops, Main, Up/ Down Contactor

with overload and phase reversal relay and safety controls.

[3] Car with M S platform with bracings of adequate size and to sustain

the impact load cabin + passenger with safety factor of fire for steel and

side panels of Stainless steel of sheet of grade 304 duty. Car ceiling will

be S.S. finishes with aesthetic appearance with LED ceiling lights. Car

flooring shall be of s/s 304 chaker plate design sugeested of engineer in

charge. of engineer in charge. Car doors shall be of stainless steel grade

304, hairline finish with centre opening / telescopic automatic doors.

Car panel will also be S.S. 304 finished with emergency stop device,

mechanical door safety device, facility of auto/ attended mode. All car

panel buttons and all floor switches must be with brail language as per

[4] All landing doors must be fire rated for 2 hour shall be fully

automatic centre opening/ telescopic opening made of hairline finish

steel grade of 304 with key holes and infrared curtains with Unlocking

facility from outside

Item Description of Item (with brief specification and reference to book of Quantity Unit Rate in Total

No. specifications) Figures Amount

388 Supply, Installation, Testing & Commissioning of following size of Grid 60.000 per kw 40658.56

Tied Solar Power Plant with

Solar Panels (ALMM approved): Frame Material : Anodized Aluminum

alloy Frame With Twin Wall Profile, Front Cover : High Transmission Low-

Iron Tempered Glass (AR Coated), High efficency and positive power

tolerance Pmax: 0/+5, Module Efficiency should be approx. 19.5%-22%,

Normal operating temperature 45'C, Junction Box with Waterproof IP67

& MC4 Compatible and Enclosed with Bypass diodes, 100%

Electroluminescence test to ensure error free Modules, Thep. temp. co-

efficient of the PV module shall equal or better than -0.45%/degree C.

Solar PV modules of minimum fill factor 75% to be used. Unit

Production:- More than 4.5 Unit /kw /day (Actual)(1Year Avg) With

year Product warranty and 25 year Linear Power Warranty includes all

mechanical and electrical parameters of the Solar panel. Modules must

be complied to the DCR(Domestic content requirements). The Ration of

AC to DC is 5:6 for the Installation capacity which are given in AC KW.

Solar Inverter: MPPT Range: MPPT Range: 80-1000 V , Max efficiency:

97.5% - 98.9%, O/p Frequency: 50/60Hz, Operating Altitude (m) ≤4000,

O/p Power Factor: ~1, O/P THDi: <3%, Operating Tempreture Range: -

25~60°C, Integrated protection of Inverter are Anti-islanding Protection,

Input Reverse Polarity Protection, Insulation Resistor Detection, Ground

fault protection, Residual Current Monitoring Unit, Output Over Current

Protection, Output Short Circuit Protection, Output Over Voltage

Protection, PV array string fault Protection. Protection Degree: IP65,

User Interface LCD & APP, Datalogger & Communication: GPRS / Wi-Fi

Integrated, Input Reverse Polarity Protection Integrated, Insulation

I/We am/are willing to carry out the work at………………….% above/below percent(Should be written in figures and words) of the estimated rate

mentioned above. Amount of my /our tender works out as under.

Item Description of Item (with brief specification and reference to book of Quantity Unit Rate in Total

No. specifications) Figures Amount

Estimated amount put to tender Estimated amount put to tender

Deduct………% below Deduct………% Above

In words In words

* (Please strike out whichever is not applicable).

1 The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In-Charge for which no

extra payment shall be made.

2 The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3 GST and Income tax TDS will be deducted at a source while making payments of bills.

4 In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-10/2017 Cement

Consumption/16/C Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where there is a change as per actual mix design the

cost of difference of cement consumption have been deducted from the rate of original item at the rate of input rate mentioned in all

Deputy Executive Engineer Executive Engineer

R & B Sub Division R & B Division