Providing and Erecting to High mast Tower for Left Side Area At Juj Dam

Name of Work : Providing and Erecting to high mast Tower for Left Side Area at Juj Dam

Sr Qty Item rate rate in words Per Amount

Supplying and erecting Flexible PVC insulated multi strand

Rupees NinetySeven Paise

1 110 multi core 1.1 kv grade ISI marked copper wires of 97.97 Mtr

NinetySeven Only

following size to be erected as directed.

(h) 2.50 Sq.mm 3 core round PVC sheathed

Supplying and erecting LED street light / Flood light fittings

with High power White LEDs wattage of 3 Watt and above

assembled on single MCPCB, efficiency more than 130 lm/w

and corrosion free High pressure die cast aluminum housing

with smooth finish powder coated and heat sink extruded

aluminium with diffuser and Polycarbonate optics/ lenses,

with toughened glass with company mark/name engraved

or embossed 160 to 270 V,Power Factor more than 0.95,

2 THD < 10 %, CCT 3000 K to 5700K,Uniformity ratio >0.45,

Luminaire efficacy> 100 lumens/watt . LED driver efficiency

> 85 %.( fittings required LM-79 & LM-80

certificates)(NOTE: Below description have shown ranges of

Wattage capacity of LED fittings.The Engineer incharge may

select any wattage capacity between the ranges shown.)

(B) Flood Light (IP-65), Surge protection -4KV integral and

,Light must have 440VAC line supply with over-voltage

(vii) 200 to 250 watts cat-III Ea

Rupees Nine Thousand One

20 9196.05 Hundred NinetySix Paise Five

Providing & erecting 415 V MCB Four Pole for Motor &

Inductive Load (C Curve) having 10KA breaking capacity &

3 confirms to IS :8828 in existing box having following capacity

(b) 40 Amp. Cat.- III Rupees Seven Hundred Ea

3 736.29 ThirtySix Paise TwentyNine

Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured

cable multistrand Aluminium conductor for 1.1 KV. to

4 be laid on wall with necessary clamps or in existing trench /

pipe of following size of cables

(a) 4 core 16 Sq. mm Rupees One Hundred Mtr

344 184.83 EightyFour Paise EightyThree

Supplying & erecting in earthpit of minimum bore dia. 225mm size

approved make Safe Earthing Electrode consisting Pipe-in-Pipe

Technology as per IS 3043-1987 made of corrosion free hot

dipped G.I.Pipes having Outer pipe dia of 80 mm having 80-200

Micron galvanising, Inner pipe dia of 40 mm having 200-250

Micron galvanising, connection terminal dia of 14 mm with

constant ohmic value surrounded by highly conductive compound

with high charge dissipation suitable for following type of

applications with chamber and heavy duty cover (A)(approved

make OEM has to submit test certificate including value of earth

resistance of installation duly stamped and signed by agency and

officer Incharge has to ensure the value of earthing resistane

mentioned in test Certificate) & having back filling compound of

(B) Inner chemical (CCM Compound)- Resistivity:- 0.2 ohm /

meter testing as per IEC 62561-2017, Voltage drop:- < 1 volt at no

load & dry form, Sulphar content:- <2%(C) Back fill Compound :-

Earthing compound should be capable to retain moisture for long

time Necessary test report must be submitted by Agency.

[A] For electrical installation up to 440 V

Length of Pipe - 1 Mtr Rupees Five Thousand Eight

4 Back filling compound - 1 Nos. of Bag of 15 Kgs. Add 1% 5842.85 Hundred FourtyTwo Paise Ea

labour cess EightyFive Only

Making trench in Hard Murrum / Tar Road of suitable width

of 90 cm or required depth for laying any size of cable or

locating the fault all over the run and back filling the same Rupees SeventyFour Paise

and making the surface as normal ground. SeventyFour Only

(B) If additional machinery like hammer driller or JCB use Rupees Three Hundred

FiftySeven Paise FiftyFour

Providing & laying approved make Double walled Only

corrugated pipes (DWC) of polyethylene(conforming to IS

14930 II )with necessary connecting accessories of same

8 material at required depth in existing trench for laying of

cable. below ground / road surface for enclosing cable.

Rupees SixtyTwo Paise

350 (A)50 mm outer dia 62.62 Mtr

Solder less crimping type Aluminium lugs conforming to

IS suitable for cable of following size evenly crimped with

high pressure tool & connected to switchgear terminals with

9 brass/cadmium plated nut bolts in an approved manner.

(C) 16/25 Sq.mm. Rupees Fifteen Paise Fifteen Ea

Supplying & erecting approved make time switch with single Ea

pole airbreak contacts suitable for 230 V.15/16A.complete

with self starting motor driven clock ‘ON’ &’ OFF’ automatic Rupees Two Thousand Three

10 2 arrangement at any predetermined time during each 24 2354.31 Hundred FiftyFour Paise

hours,With nickel cadmium rechargeable battery backup ThirtyOne Only

erected as directed.

Supplying, erecting, testing, commissioning approved make

M.S. Polygonal High Mast Pole having following general

(a) Polygonal Section fabricated from M.S. Plate confirms

BSEN 10025 & Hot deep galvanized minimum 65/86 micron

(as per IS 2629 /1985) Lantern carriage with ring and rubber

lines for erection of luminaries of suitable site.

(b) Maximum telescopic section not more than four

(c) Double drum gear pipe motorized winch with 6mm dia

S.S. Rod (For 16 mtr and above size)

11 (d) Approved make L.E.D. aviation light = 1 No. Lightening

arrestor = 1 No. with necessary wiring of 2.5 sq.mm 5 core

ISI copper cable Unarmoured.

(e) Bottom most section suitable for mounting reversible

motor and switchgears having door not more than 1400mm

x 300mm with waterproof gasket & hinges & locking

(f) Pole structure comprises suitable size of reversible

motor, cable and necessary switchgears with control panel.

[4] High Mast 16 Mtr. TOP A/F 150 Mm, BOTTOM A/F

Mm, No. of Sec. No. - 2, Bottom Thickness - 4 mm, Top

Sec. - 3 mm, Size Base Plate - dia.630 mm x 20 mm thick, Rupees Two Lakh Twelve

2 Foundation Bolt Size M24 x 870 mm, Qty - 12 Nos., Suitable 212104.04 Thousand One Hundred Four Ea.

for mounting Fitting of Light - 10 Nos. Paise Four Only

Providing and erecting AC-3 duty 3 pole power contactor

with 2 NO & 2 NC aux contacts complete with 415V/220V

12 operating coil suitable for (L&T, BCH,T.C., Siemens, C&S

(B) for 40 A rating Ea

Rupees Four Thousand

4 4793.46 Seven Hundred NinetyThree

Paise FourtySix Only

I/We am/are willing to carry out the work at …………………………………………………………………% above/below percent (shouldbe written

in figured and words) of the estimated rates mentioned above. Amount of my/our tender works out as under.

Estimated amount Estimated amount

Put to tender Rs……………. Put to tender Rs…………….

Deduct : ……. % above RS…………… Deduct : ……. % Below RS……………

Net Rs…………… Net Rs……………

*(Please strike out whitchever is not applicable).

Note 1 – All work shall be carried out as per public works department handbook and other specification of Division ot as directed.

Note 2 – All the columns is schedule should be filled in ink and the total of the entries in the last column should be struck by the

contractor under his signature.

Note 3 – Rates quoted include clearance of site (prior commencement of work and at its close ) in all respects and hold good for work

under all conditions, site, moisture,weather etc.

Note 4 – To be continued on additional sheets, if found necessary.

Note 5 - The rates quoted by the Contractor must be inclusive of all taxes prevailing on due date of bid submission except GST. However,

any subsequent changes in the tax structure by Government after due date of bid submission will be compensated (+/-) on availability or

submission of actual documentation. Contractor will have to intimate Engineer regarding changes occurred in the tax structure after bid

submission. If the contractor fails to provide such information and if any financial obligation may arise due to change in tax structure, same

will be recovered from the contractor. GST will be paid separately on the bills. Hence, it is the responsibility of the contractor to pay the GST

to the concerned Authority.

Deputy Executive Engineer Executive Engineer

Electrical Sub Division Ukai Division No.1