PERIODICAL SERVICES TO BUILDINGS TO REKHAMARI CAMP AREA ROCKET SATA LT AND MED REGT AND MISC BR REPAIRS MAINTENANCE TO EM INSTALLATION AT NORTH OF RAILWAY LINE UNDER GE MISSAMARI

S&F in repair, vitreous China pedestal wash basin, white, flat back, size 550x400mm including brackets including cutting for and pinning in ends of brackets or erecting stand including, 15mm bore pillar taps, cast copper alloy with capston heads, chromium plated, fancy type, screwed down high pressure, with or without lettered hot or cold with long screwed shanks and fly-nuts, screwed for iron pipe, 32mm bore Waste fittings, brass, chromium plated with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed, and 32mm bore PVC waste pipe 800mm long complete all as specified and as directed.

M&L preparation of wall surface and applying One coat water based premium acrylic smooth exterior emulsion (of approved colour) with PU & silicon additives, excellent dirt pick up resistance with low VOC less than 50 gram/litre as per the LEEDS specifications, Anti Algai properties in two coats @1.79 ltr (undiluted)/ 10 sqm diluted with water as per manufacturer instructions applied over priming coat fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having pressure of 3300 PSI. Allow 6-8 hrs to dry the surface in both the coats of paint complete all as specified and directed.

M&L preparation of old decorated plastered surfaces of walls and applying one coat of white wash, complete all as specified and as directed.

M&L preparation of old decorated plastered surfaces of ceiling and applying one coat of white wash, complete all as specified and as directed.

M&L Preparation old decorated plastered surfaces of wall and applying one coat of cement base paint,using airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and as per manufacturer's instruction complete all as specified and as directed.

M&L preparation of old surfaces of wall and applying one coat of distempering with 1st quality Acrylic distemper (ready mixed) having VOC content less than 50 gms/litre of approved manufacturer's instruction complete all as specified and directed. Note :- Sanding of surface to be done by mechanical sander with 1500-2700 rpm, with internal dust extraction system for clean environment certified by paint manufacturer. Work shall be carried out using Roller/Brush as per manufacturer's instruction. Proper masking to be carried out before primer and paint application.

M&L preparation of old painted wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed.

S&F 30 mm thick factory made 2nd class hard wood glazed and skeleton shutters, open with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass,etc, sizes of members of shutters as specified in SSR Part -I. section 8, clause 8.24(b), complete all as specified and as directed.

Taking down cement plaster on wall & ceiling of any description including racking out joints, hacking for key and scrubbing down with water etc complete including removing debries of the site complete all as specified and as directed.

M&L 15mm thick plaster of cement mortar (1:4) rendering on fair faces of brick work in two layers (10mm & 5mm) mixed with and including water proofing compound in top layer as per manufacturer's instructions, finishing the surface even and smooth without using extra cement complete all as specified and as directed.

Supply only Integral water proofing compound complete all as specified and directed.

M&L Rendering 15 mm thick on other than fair faces of brick work or concrete surfaces in cement mortar 1:6 for finished even and fair complete all as specified and as directed.

M&L rendering 5 mm thick on ceiling or concrete Surfaces in cement mortar 1:3 finished even and smooth. (without using extra cement), complete all as specified and directed.

M&L preperation of new surfaces of ceilings and applying three coat of white wash,complete all as specified and as directed

M&L preparation of new wall surface applying Two or more coats of Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specificationover new surface over 1 mm thick wall care putty,complete all as specified and directed.

M&L preparation of new wall surface applying Two or more coats of 100% Premium acrylic exterior emulsion paint with silicone additives of required shade additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @2.20 litre/ 10 sqm complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

Dismantling posts or struts (wood, steel or R.C.C.) any section, embedded in concrete , brickwork, masonary etc. including taking out embedded portion and making good disturbed ground, complete all as specified and as directed.

Dismantling fencing wire mesh, any type complete all as specified and directed.

M&L providing plain cement concrete type C-2, (1:3:6), (using 40 mm graded stone aggregate), Cement concrete in foundations, filling and mass concrete complete all as specified and directed.

M&L TMT bar 10 mm dia and over, cut to length, bent to shape required, including cranking, hooking ends as in chain link fencing complete all as specified and as directed.

Supply only chain link MS galvanized fencing 4mm dia and size as ordered, complete all as specified and as directed.

S&F in repair Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) complete all as specified and as directed.

S&F Mild steel screw bolts 11 to 15mm dia. (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5 cm and not exc 10cm long complete all as specified and directed.

M&L preparation new iron and steel surfaces of any description, exc 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed.

S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 including necessary preperation of surfaces and applying one shop coat of red oxide, zinc chrome primer, complete all as specified and as directed.

Taking down cement plaster on wall & ceiling of any description including racking out joints, hacking for key and scrubbing down with water etc complete including removing debries of the site, complete all as specified and as directed.

M&L rendering 15mm thick with cement mortar 1:4 on fair faces of brick work in two layers (10mm and 5mm) sperately mixed with water proofing compund in top layer as per manufacturers instruction and finishing the surfaces even and fair complete all as specified and directed. Note:- WPC shall be measured & paid separately

Supply only Integral water proofing compound complete all as specified and directed.

M&L providing plain cement concrete type B1, (1:2:4), (using 20 mm graded stone aggregate), as in fixing of hold fast, back filling of pressed steel door frame including necessary form work as required complete all as specified and directed.

S&F 2nd class hard wood plain solid, straight chowkats and frames , wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and directed.

S&F anodised aluminium frame for doors, windows, ventileters with one or more rebates including joining cleat for fixing etc complete all as specified including powder coating above aluminium section.(minimum thickness of powder coating 50 micron) complete all as specified and directed.

S&F Powder coated Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified complete all as specified and directed Note:- (i) Glass/Wire Guage shall be measured and paid seperately at supply only rates (ii) Design/pattern, profile sizes and other dimensions shall be of standard sizes and as directed (iii) Minimum thickness of powder coating 50 micron

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, fixed in opening as specified in SSR Part I, Section 8 complete all as specified and as directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes far top and bottom rails, MS frame shall be covered with heat moulded plain colour PVC “C” channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail; Paneling of plain colour PVC sheets to be fitted in the MS frame welded / sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement complete all as specified in SSR Part I, Section 8 complete all as specified and as directed.

S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.

S&F 4mm thick plain sheet glass,ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and as directed.

M&L brick work with sub class 'B' bricks, old size bricks, straight or curved on plan exceeding 6m mean radius built in cement mortar (1:6) complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing debries/ rubbish from the site complete all as specified and directed.

paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand including dismantling existing unserviceable paver block complete all as specified and directed.