REPAIRS TO JOINERY, FLOORING, MP TILE ROOFING, SANITARY FITTINGS, ROLLING SHUTTERS, WATER PROOFING TREATMENT ETC FOR E AND J AREA UNDER AGE B/R II AT NAVAL BASE KOCHI

Amount

Dismantling floor hearth or wall tiling including cement mortar bedding, removing serviceable tiles to store & rubbish off the premises complete all as specified and directed.

M&L for glazed ceramic coloured tiles 600x 300x 7 mm thick on vertical surfaces such as skirting, dado etc over and including 10mm thick backing coat in CM 1:4, set and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified and directed.

M&L for non skid ceramic coloured tiles of size 300x300 mm and 7 to 8 mm thick (square / rectangular), over and including CM 1:6, 15mm thick screed, set & jointed in neat cement slurry & pointed in white or coloured cement to match all as specified and directed.

M&L for non skid ceramic coloured tiles, 7 to 8 mm thick (square / rectangular) area of each tile exc 0.11 sqm but n.exc 0.18 sqm, on vertical surfaces such as skirting etc, over and including 10mm thick backing coat in CM 1:3, set & jointed in neat cement slurry & pointed in white or coloured cement to match all as specified and directed.

M&L for light shade vitrified ceramic tiles of size 600x600x10mm, laid in floors etc. over and including CM 1:6, 15mm thick screed, set & jointed in neat cement slurry & pointed in white or coloured cement to match all as specified and directed.

M&L for light shade vitrified ceramic tiles,10mm thick (square/rectangular), area of each tile not exceeding 0.36 SqM, laid on vertical surfaces such as skirting etc, over and including 10mm thick backing coat in CM 1:3, set & jointed in neat cement slurry & pointed in white or coloured cement to match all as specified and directed.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water any description, etc. all as specified and directed.

M&L for rendering 10mm thick on brick work or concrete surfaces in CM 1:4, mixed with water proofing compound, finished even & smooth (without using extra cement.) all as specified and directed. (Note:- Supply only water proofing compound will be measured and paid separately).

Demolition of reinforced cement concrete as in roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work and removal of debris to outside naval base complete all as specified and directed.

M&L for chequered cement concrete tiles 30 cm x 30 cm x 25 mm thick with grey cement and pigment, over and including CM 1:6, 20mm thick screed, set, jointed and pointed in neat cement slurry complete all as specified and directed

Demolition of plain cement concrete in ground floors and pavings not exc 15 cm thickness (below or above gound level) all as specified and directed.

M&L for 100 mm thick plain cement concrete type D-2, 1:4:8 (40mm graded aggregate) as in sub base all as specified and directed .

M&L for 75 mm thick plain cement concrete type C-2, 1:3:6 (40mm graded aggregate) as in sub base, surfaces finished even and rough to receive the topping layer all as specified and directed .

S&F in repair vitreous china white wash down water closet pan (pedestal pattern) with trap and fixing bolts (excluding flushing cistern and flush pipe) including connection to drain (or outgoing pipe) and to flushing pipe, anti-syphonage pipe, etc. complete all as specified and as directed. (Make:- Parryware (Cat No.C844A white) / Cera (Cat No.3131white) / Hindware (Cat No. 92082 white)

S&F in repairs vitreous chaina squatting pan orissa pattern size 580 x 440 mm, white, with integral foot rest (excluding flushing cistern and flush pipe) complete including provision of lime concrete bedding, connecting to trap, flush pipe, anti-syphonoge pipe etc, and making good floor complete all as specified and directed.

S&F in repair plastic water closet seat cover, any colour, closed pattern with flat bottom & cover and mild steel chromium plated or aluminium hinging device complete all as specified and directed.

S&F in repair PVC valveless, syphonic action type flushing cistern, 10 litre capacity, low level, any colour, with inlet, ball valve, float and handle including brackets complete all as specified and directed.

S & F in repairs PVC connection 15mm bore 45cm long with brass coupling complete all as specified and directed..

S&F in repairs white glazed vitreous china WHB flat back size 550x400 mm including CI bracket etc incl waste coupling and PVC waste pipe 40mm bore 90cm long spring type complete all as specified and directed. (Make:- Parryware (Cat No.C844T) / Johnson (Cat No.P5115MPW) / Jaguar (Cat No. CNS-WHT-809)

S&F in repairs vitreous china urinal of size 465x355x265 mm (minimum), white, bowl type,flat back including providing and fixing plugs, bedding urinal against wall in Cement Mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement and fixing with grating and union for discharge pipe including flush pipe and waste pipe complete all as specified and as directed. (Make:- Parryware (Cat No.C0578 white colour) / Johnson (Cat No.P0519PW) / Jaguar (Cat No. URS-WHT-13261)

S&F in repair stainless steel grating , all as specified and directed

S&F in repair brass chromium plated waste coupling 32mm dia , all as specified and directed

S&F in repair PVC (SWR) foor/ nahani trap, plain, diameter of outlet 75mm, with grating and jointing to waste pipe with solvent cement and fixed, complete all as specified and as directed.

S&F in repair 32mm dia PVC waste pipe with cup head for wash hand basin, all as specified and directed

S&F in repair sink with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mmcomplete all as specified and directed.

S& F in repairs pillar tap 15mm bore fancy type, cast copper alloy with capstan heads, chromium plated, screwed down all as specified and directed. (Make:- Parryware (Cat No.T0802A1) / Johnson (Cat No.T2601C4) / Jaguar (Cat No. ARI 39011)

S&F in repair brass Chromium Plated Tubular Towel Rail, 20mm dia, D type, 60 Cm long between Flanges and fixed, complete all as specified and as directed.

S&F in repair CP health faucet including flexible tube and wall hook complete all as specified and directed. (Make:- Parryware (Cat No.T9961A1) / CERA (Cat No.8030101) / Jaguar (Cat No. ALD-CHR-573)

M&L for cutting and grinding of terrazzo tiles or kota stone floor etc with grinding machine after filling cavities with cement mixed with pigment to match the existing surface and polishing with 3 step grinding stone complete on floor/vertical surface of dado, skirting etc complete all as specified and directed

M & L for hardcore with broken stone or boulders of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface all as specified and directed

M&L for 70 mm thick Plain Cement Concrete type B-1, 1:2:4 (20mm graded aggregate) as in flooring complete all as specified and directed .

Supply only integral water proofing compound, Conplast X421IC, complete all as specified.

M&L for water proofing treatment for toilet with Brush Bond of make FOSROC complete all as specified and directed .

S&F in repair bottle trap complete all as specified and directed. (Make:- Parryware (Cat No.T3203A1) / Johnson(Cat No.T0060C) / Jaguar (Cat No. ALD-769L300x190)

S & F in repair aluminium alloy wire cloth 0.45 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with aluminium wire staples including wooden beads complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from frames) n exc 1.50 sq. m each all as specified and directed

Taking down chowkats or frames with shutters (without taking off shutters from frames) exc 1.50 sq. m but not exc 4 Sqm each all as specified and directed.

Taking down shutters of any description not exc 1 sqm each all as specified and directed.

Taking down shutters of any description exc 1 sqm and n exc 2Sqm each all as specified and directed.

M&L for 2nd class hard wood plain, solid, straight, chowkats and frames, wrought framed, rebated on the solid, rounded or chamfered, put together with glue, pinned at joints, supplied and fixed all as specified and directed.

M&L for 2nd class hard wood, 35mm thick plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed.

S & F 2nd class hardwood 30 mm thick glazed skeleton shutters, open rebated and prepared to receive glass, guaze etc, (without sash bars), edges of framing plain, chamfered or rounded fitted with cut, and mitred beads for securing glass etc, sizes of members of shutters as specified in SSR Part I, section 8, clause 8.24(a) complete all as specified and directed.

M & L for applying two coats of synthetic enamel paint over a coat of pink primer on new wooden surface over 10cm width or girth including preparation of surfaces all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames, glazed with putty or fixed with beads all as specified and directed.

M&L for 4 mm thick frosted glass, ordinary quality fixed with glazing clips/aluminium cleats in square not exc 0.50 sqm in each pane all as specified and directed.

M&L for 4 mm thick sheet glass, ordinary quality fixed with glazing clips/aluminium cleats in square not exc 0.50 sqm in each pane all as specified and directed.

S&F in repairs stainless steel wire cloth, 0.36mm nominal dia or wire and average width or aperature 1.40mm, fixed with stainless steel wire staples complete all as specified and directed..

S&F in repairs Solid PVC Door Frame of size 50mm x 47mm made out of 5.0mm plain colour PVC sheet reinforced with mild steel square tube, and fixing in opening as per specifications and drawing, complete all as specified and as directed.

S&F factory made Solid PVC Moulded Door Shutters 28 to 30 mm thick (stiles) with wood free EPS, with 2,4 or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front Face & 2mm Plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing all as specified and directed.

M&L for repairs to aluminium door of size not exceeding 2 SqM and making good and functional including changing of pivot, handle, rubber beading, repairs to lock etc all as directed.

M&L for repairs to aluminium window of any size and making good and functional including changing of pivot, handle, rubber beading, repairs to lock etc all as directed.

S&F in repairs door closer, hydraulically regulated, aluminium (Die cast) body, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg, all as specified and directed.

M&L for providing PCC 1:2:4, type B1 (using 20 mm graded stone aggregate) as in lintels upto 1.5m clear span, cills, steps, parapets and railings, copings, bed plates, kerbs, etc including necessary form work complete all as specified and directed.

S&F MS work as in bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required, hooks (stay), heavy, for large gates; hook and pintle hinges large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed.

S & F 200mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and directed.

S & F 100mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and directed.

S&F 200mm long aluminium anodised sliding bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections of cast aluminium alloy all as specified and directed.

S&F 125mm long Aluminium anodised handle, cast type all as specified and directed.

S&F 100mm long Aluminium anodised handle, cast type all as specified and directed.

S&F 100mm long stainless steel butt hinges, medium weight , cold rolled, all as specified and directed.

S&F 75mm long stainless steel butt hinges, medium weight , cold rolled, all as specified and directed.

M&L for rendering 15mm thick on brick work or concrete surfaces in 1:4 cement mortar, finished even & smooth (without using extra cement.) all as specified and directed .

M&L for newly plastered internal surfaces of walls and applying two coats of interior emulsion (Asian Royale Interior Emulsion or equivalent approved make) over a coat of primer over and incluyding 3mm thick wall care putty complete all as specified and directed .

M & L for preparation of newly plastered wall surfaces and applying two coats of antifungal paint (Asian Ultima Protek or equivalent approve make) over a coat of primer over and including 3mm thick wall care putty of three layer complete all as specified and directed.

M & L for preparation of new steel surfaces of any description over 10cm width or girth and applying two coats of anti corrosive epoxy paint over a coat of epoxy primer complete all as specified and directed.

M&L for 75mm thick Cement concrete type C1, 1:3:6 (20mm graded aggregate) laid in plinth protection and similar work, finishing cement concrete surface even and smooth without using extra cement complete all as specified and directed

M&L for 10mm thick bitumastic gola with 80/25 bitumen and coarse sand mixture 1:3 by weight for joints between bays complete all as specified and directed.

M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with andincluding mild steel wire (annealed) not less than 0.9mm dia or securing with clip all as specified and directed .

All as per item No 69 here-in-before but 5mm dia and over upto and including 10mm dia in stirrups, helical stirrups, spacers and binders

Destruction of growth of weed plants with roots from the roof tops and vertical walls of buildings at any position and height, by completely removing the growth and applying 2.40 'D' oil mixed with Veedol chemical solution and sprayed on and around roots and at places of possible growth of weeds and making good damaged surfaces in cement mortar 1:4 or PCC 1:1 1/2:3 as required and as directed by Engineer-in-Charge

Dismantling of single layer mangalore pattern roof tiles including ridges all as specified and directed.

Dismantling of plain or corrugated steel sheeting any gauge, thickness including nanital or similar pattern roof covering complete all as specified and directed.

Dismantling asbestos cement (corrugated, semi-corrugated, etc) sheets in roof coverings all as specified and directed.

Dismantling of battens for tiles, shingles etc, of any size including tilting fillets, spaced exc 15 cm all as specified and directed.

Demolition of wooden boarding any description and fixed in any position with nails all as specified and directed.

Dismantling of Wall or ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets etc , keep in safe custody for reuse complete all as specified and directed.

Dismantling timber scantlings 40 sq. cm and over in section, in any position unframed work and all as specified and directed.

Dismantling timber scantlings under 40 sq. cm in section, in fillets, rails, posts, rafters, purlins etc in unframed work all as specified and directed.

S&F second class hard wood weather boarding, clean sawn, plain, 20mm thick as in soffit of gutter, eve board etc, fixed with nails complete all as specified and directed.

All as per item No 80 here-in-before, but fixing only. (Serviceable boarding obtained vide item No.76 above shall be reused)

S&F 0.63mm thick Galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with L type or J type or cranked hook bolts, in roofs, walls etc. with grade of zinc coating 275 complete all as specified and directed.

All as per item No 82 here-in-before, but fixing only. (Serviceable sheeting obtained vide item No.73 above shall be reused)

S&F aluminium sheeting 0.71mm thick, alloy 31000H4 in ridge, hips, valley gutter, drip and straight flashings allas specified and directed.

S&F for Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

S&F for Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, ridge/valley etc, fixed with self tapping screws as specified

M&L 6mm thick asbestos cement, corrugated or semi-corrugated sheets in roofs, walls etc. fixed with L type or J type or cranked hook bolts complete all as specified

M&L Asbestos cement two piece adjustable plain wing ridge 6mm thick fixed with L type or J type or cranked hook bolts complete all as specified

M&L for mangalore pattern roof tiles, interlocking at sides, joints laid dry complete all as specified

All as per item No 89 here-in-before but except tiles. ( Serviceable tiles obtained from item No.72 above shall be reused).

M&L for mangalore pattern ridge or hip tiles, bedded and jointed in cement mortar 1:6 complete all as specified

All as per item No 91 here-in-before but except tiles. ( Serviceable tiles obtained from item No.72 above shall be reused).

M&L for 2nd class hard wood in scantlings, clean sawn as in purlins, rafters etc in roof all as specified and directed.

M&L for second class hard wood clean sawn battens for tiles, spaced at 30cm centres, sectional area exc 15 Sqcm but not exc 25 Sqcm complete all as specified

All as per item No 94 here-in-before but except battens. ( Serviceable battens obtained from item No.75 above shall be reused).

S&F in repairs 4mm thick Non asbestos fibre cement building boards fixed to timber/Aluminium framework with screws all as specified and directed

M&L for preparing new surfaces of ceilling and applying three coats of white wash, complete all as specified and as directed.

M&L for second class hard wood plain fillets square ,rectangular any section, clean sawn, secured with nails or brads, sectional area exe 3 sqcm and n exe 6 sqcm, complete all as specified and directed

Taking down eves gutters and rain water pipes (any size or pattern), including all fittings, heads, shoes, bends, swan necks etc all as specified and directed.

S & F 150 mm dia, half round PVC eaves gutter, heavy duty including necessary fixing arrangement complete all as specified

S & F PVC (SWR) junctions (Single 'T') equal or unequal to fit 150 mm bore eaves gutters, top portion half round and bottom portion to fit 110 mm bore PVC pipe complete all as specified

S & F PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors, 110 mm bore all as specified

S & F PVC (SWR) bends with acces door, any radius, 110mm bore all as specified

Dismantling structural steel work such as brackets for rain water pipe, gutter etc all as specified and directed.

M & L for framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified

M&L for rolled mild steel plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment conforming to Fe 410-W-(Gde-E-250) quality A complete all as specified

M&L for structural steel work in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes conforming to I.S. 1161-1979 grade St-240 complete all as specified

M&L for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc.conforming to Fe 410 -W (Gde-E- 250) quality-A complete all as specified

M & L for preparation of surfaces of wood and wood based materials, new or old of any description and girth not other wise described and treated with one coat of creosote all as specified

M & L for preparation of surfaces of wood and wood based materials, new or old of any description and girth not other wise described and treated with two coats of creosote all as specified

M & L for preparation of surfaces of old tile battens of any size and spacing with one coat of creosote complete all as specified and directed. (Measured overall on one side only and spaces not deducted).

M&L for providing water proofing treatment by applying oil bound bituminous primer @ 0.25kg/SqM, providing and laying 4mm thick APP modified water proofing membrane weighing not less than 4Kg/SqM, reinforced non woven polyester matt not less than 160g/SqM, having softening point not less than 140°C, longitudinal tensile strength not less than 800 N/Sqcm, tearing strength of 180 N, laid by torch application including 10 cm side overlap and 15 cm end overlap and applying a coat of blown grade ht bitumen 90/15 over the membrane @ 1.2 Kg/SqM, finishing the surface with solar reflective bituminous aluminium paint @ 100g/SqM complete as per manufacturer's instructions and as specified and directed.

Demolition of brickwork or stone masonry or PCC block masonry built in cement mortar all as specified and directed.

M&L for pre-cast cement concrete block masonry in Type C1, 1:3:6 (20mm graded aggregate) with solid blocks, exc 10 cm in width and setting in cement mortar 1:6 complete all as specified

M & L for formwork to sides and soffits of floor or roof beams, bressummers, lintels, shelves including supports for rough finished surface of concrete all as specified and directed.

M&L for RCC (1:2:4) type B1 using 20 mm graded stone aggregate in beams, cantilevers, bressummers, lintels all as specified and directed.

S&F Anodised aluminium snap grid frame work for false ceiling with grid size of grid 605 x 605 mm including hangers 6mm dia GI (upto 1200mm long) for adjusting level by means of cleats made out of GI flat 40x3mm, 60 mm long fixed to roof & expansion hold fastners 12.5mm dia, 40mm long complete all as specified and directed

M&L framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete

S& F steel rolling shutters, 1.25mm thick laths,without ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer, erected in position as indicated, complete, push pull or manual type complete all as specified

M&L for providing pressure grouting on leaking points using 40 psi grout pump, sealing the cracks and honeycombs using cementitious sealent, applying a coat of polyplus AC, two component acrylic based water proof coat @ 500g/SqM, after 4 hours applying second coat with polyplus AC @ 500g/SqM complete all as specified and directed.

T L ALOSIOUS

MS BUILDERS

POOJA ENGINEERING WORKS

SUKU CONSTRUCTIONS

Anaswara Constructions