Loading…
Loading…
Tender ID
Tender Value
Refer Docs
EMD Value
₹50,000
Closing Date
23 Mar 2026, 11:00 amClosed
CHAIRMAN KATWA MUNICIPALITY
CHAIRMAN KATWA MUNICIPALITY
Annual Maintenance service for a Furnace Maintenance Components for repairing or Replacement of electric Cremation furnace of Unit-I and II and Pollution Control Unit ward no 10, Under Katwa Municipality. From Date- 01/04/2026 to 31/03/2027
2026_MAD_1022669_1
WBMAD 98 ( DEV / KM ) 2025-2026
Open Tender
Miscellaneous Services
Item Rate
Under Katwa Municipality
Please refer Tender documents.
4 documents required · 4 mandatory
₹0
₹50,000
Yes
11 May 2026
16 Mar 2026
25 Mar 2026
16 Mar 2026
23 Mar 2026
16 Mar 2026
Roast Bricks
Fire Tiles Brick No. 27
Fire Tiles Brick No. 29
Angle Bricks Brick No. 88
Ash Bricks Brick No 16 to 24
Air Pocket Brick Brick No 100
Air Pocket Brick Brick No 101
Brick No. 92
Brick No. 93
Insulation Bricks
24" x 12" x 3" tiles
Fire Bricks IS : 8
Ash Door Bricks (Small)
Ash Door Bricks (Big)
Fire Clay
Ceramic Fibre Blanket
Ceramic Tube
Heating Elements Coil
Copper Wire 10 SWG with Porcelain Bit
Brass Connector for Heating Coil
Supply, delivery at site and laying of 1.1 Kv grade XLPE insulated PVC outer sheathed armoured Alluminum cable conductor power cable of following size either through cable duct or through cable tray or through protection pipes incl end termination as required and as per technical specification. a) 3 ½ core X 35 sq. mm. (Al.)
b) 3core x 6 sq mm (Al)
c)Termination of Cable with necessary Gland & Socket
200Amp TPN Fuse Switch unit FN Type Open/Closed
100 Amp TPN Fuse Switch unit FN Type Open/ Closed
32 Amp TPN Fuse Switch unit FN Type Open/ Closed
32 Amp-TPN Isolator
16 Amp. DP Isolator (Enclosed)
63 TPN Contactor (L & T) ML 4
Starter for Motor L& T make
400 A HRC Fuse Base HN/ HQ
200 A HRC Fuse Base HN/ HQ
100 A HRC Fuse Base
63 A HRC Fuse Base
32 A HRC Fuse Base
16 A HRC Fuse Base
300 A Porcellain Fuse
63-100A HRC Fuse
2A 32A Fuse base
0-125A Ammeter AE 4" x 4"
0-15A Ammeter AE 4" x 4"
0-300 A Ammeter AE 4" x 4"
0-500 A Volt Meter AE 4" x 4"
Temperature Controller meter
300/5A Current Transformer
LED Indicating Lamp
Chrome Allumina Thermocouple
Repairing and Overhauling the front Door Assembly with S.S rod, Grade 310 , Ceramic Blanket 128 Density 1400 Degree C Temperature Carrying etc. complete required including dismantling the damage items and restore.
Shaft for Door lifting Gear
Handle for Door Lifting
Shaft for door Operating Handle
Pulley for Door Operating
Chain i) 1" x 3 Mtr.
Chain ii) 3/4" x 2.5 Mtr
Spring Sets for door Pressing to guide rail
Trolley Rollers
Trolley Pin
Trolley Bush
Trolley Socket
Ash Collection door hinge block
Liver
Bearing Sets for Blower motor Fresh Air
Bearing Sets for Door Handle Shaft
Handle Pin for Door lifting
Sprocket for door lifting gear
Counter Weight
Ash collection spade and hooks
Ash Collection Tray Stainless Steel
Sprocket for Door operating Handle
Turn Buckle for door lifting chain
Painting of furnace unit and charging trolley by using aluminum paints before applying red oxide.
Painting of Pollution control unit by using aluminum paints before applying red oxide.
Fresh Air Blower
4mm M.S Sheet
M.S Angle 50mm x50mm
M.S Angle 25mm x25mm
Nut, Bolt 5/8 x2” with washer
Nut, Bolt ½” x2” with washer
Nut, Bolt 3/8 x2” with washer
Flue exhaust Blower with SS Impeller (ID Fan)
Induced draught fan for fresh Air (FD Fan)
Recirculation Pump
10 H.P/7.5 H.P. , 3 ph, 2900 rpm - ABB Make and accessories
2 H.P, 3 ph, 2900 rpm - ABB Make, and accessories
Spray tower unit for Scrubber
Spray tower unit for Ventury
M.S Flange
30 Mtr Height chimney painting with scrubbing thoroughly and applying 2 coat red oxide and two coat Aluminum paints
10 H.P. MOTOR
7.5 HP MOTOR
2 H.P. MOTOR
2 H.P MONO BLOCK PUMP MOTOR
Delivery Charges per trip
stage.html
html • 0.02 MB
cancelled_1.pdf
pdf • 0.69 MB
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.48 MB
BOQ_2513329.xls
BOQ • 0.30 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .