Annual Maintenance for Re winding of Burnt Motors and repairs to pump sets in Sri G T Tirupati Sri K V S Temple at Srinivasa Mangapuram and Sri Kodanda Rama Swamy Temple at Chandragiri in WEST Section area of WW I Sub Division at Tirupati for the year 2026 27 Reserved for SC or ST or Wadderas Individuals only unemployed and retrenched Engineers

Rewinding of the following Various capacities of Minor & Medium HP Monoblock burnt motors Single phase/Three phase with suitable gauge of copper wire varnishing, tapping, fitting etc., complete with over hauling and replacement of terminal plate/ minor hard ware items viz, soldering, bolts and nuts, hylam sheet strips etc., if any and to keep motor in good condition. (The following rates are EXCLUDING GST)

25 HP Electric Motor of any make.

20 HP Electric Motor of any make.

15 HP Electric Motor of any make.

12.5 HP Electric Motor of any make.

10 HP Electric Motor of any make.

7.5 HP Electric Motor of any make.

5 HP Electric Motor of any make.

3 HP Electric Motor of any make.

2 HP Electric Motor of any make.

1.5 HP Electric Motor of any make.

1.0 HP Electric Motor of any make.

0.5 HP Electric Motor of any make.

Replacement of the following sizes of ball bearings for single phase /3 phase motors. (The following rates are EXCLUDING GST)

Ball Bearings of SKF make No:6303

Ball Bearings of SKF make No:6304

Ball Bearings of SKF make No:6305

Ball Bearings of SKF make No:6306

Ball Bearings of SKF make No:6307

Ball Bearings of SKF make No:6308

Ball Bearings of SKF make No:6309

Ball Bearings of SKF make No:6310

Ball Bearings of SKF make No:6311

Ball Bearings of SKF make No:6312

Ball Bearings of SKF make No:6313

Rewinding of the following various capacities of Burnt Submersible Motors and other minor HP motors with suitable gauge insulated PVC copper wire varnishing, tapping, fitting etc., complete with over hauling and replacement of terminal plate/ minor hard ware items viz, soldering, testing of outgoing wires, bolts and nuts, painting with approved colour etc., and keep the motors in good condition. (The following rates are EXCLUDING GST)

12.5 H.P Submersible Motor of given make

10 H.P Submersible Motor of given make

7.5 H.P Submersible Motor of given make

5 H.P Submersible Motor of given make

3 H.P Submersible Motor of given make

2 H.P Submersible Motor of given make

1.5 H.P Submersible Motor of given make

1 H.P Submersible Motor of given make

0.75 H.P Submersible Motor of given make

0.50 H.P Submersible Motor of given make

Replacement of bush bearings for 12.5 HP submersible/ Monoblock motors necessary greasing, fitting etc. (The rate is EXCLUDING GST)

Repairing and reconditioning of Monoblock and jet pump single phase/ Three phase for 0.5 HP,1 HP,1.5 HP capacities for supplying and fixing, repairing and labour charges for the following items as directed during execution etc. (The following rates are EXCLUDING GST)

Gunmetal bush joint

Flamber door mouth sleeve

Bearing outer sleeves

Shaft bearing, seating, welding, turning charges etc.,

Front door mouth sleeve

Gland bore sleeve fitting

Suitable Stud bolts and nuts, making Cap Holes, Body holes, Threading etc.,

Monoblock shaft bend removing and turning charges etc.,

Checknut welding, threading, preparing new checknut joint

Impeller key way welding, providing suitable key way

Impellor checknut welding and supply of new checknut and threading

Repairing and reconditioning of Monoblock and jet pump single phase/ Three phase for 2 HP, 3 HP, 5 HP and 7.5HP capacities for supplying and fixing, repairing and labour charges for the following items as directed during execution etc. (The following rates are EXCLUDING GST)

Gunmetal bush joint

Flamber door mouth sleeve

Bearing outer sleeves

Shaft bearing, seating, welding, turning charges etc.,

Front door mouth sleeve

Gland bore sleeve fitting

Suitable Stud bolts and nuts, making Cap Holes, Body holes, Threading etc.,

Monoblock shaft bend removing and turning charges etc.,

Checknut welding, threading, preparing new checknut joint

Impeller key way welding, providing suitable key way

Impellor checknut welding and supply of new checknut and threading

Repairing and reconditioning of Monoblock and jet pump 3 phase for 10 HP, 12.5 HP, 15 HP, 20 HP and 25 HP capacities for supplying and fixing, repairing and labour charges for the following items as directed during execution etc. (The following rates are Excluding GST)

Gunmetal bush joint

Flamber door mouth sleeve

Bearing outer sleeves

Shaft bearing, seating, welding, turning charges etc.,

Front door mouth sleeve

Gland bore sleeve fitting

Cap holes, Body holes and Threading

Shaft bend removing , turning and finishing

Checknut welding, threading, new checknut joint

Impeller key way gas welding, new key way

Impellor checknut welding and threading

Repairing and reconditioning of Submersible pump for 0.50 HP, 0.75 HP, 1 HP, 1.5 HP capacities for supplying and fixing, repairing and labour charges for the following items as directed during execution etc. (The following rates are EXCLUDING GST)

Thrust bearing plate

Providing shaft bushes

Impellor gas welding, turning and finishing

Stage inner bushes

Shaft inner holes threading providing suitable bolts fitting etc.,

Pump removing, cleaning, testing for complete Pump Set

Repairing and reconditioning of Submersible pump for 2 HP, 3HP, 4HP, 5HP, 6 HP and 7.50 HP capacities for supplying and fixing, repairing and labour charges for the following items as directed during execution etc. (The following rates are EXCLUDING GST)

Thrust bearing plate

Providing shaft bushes

Impellor gas welding, turning and finishing

Stage inner bushes

Shaft inner holes threading providing suitable bolts fitting etc.,

Pump removing, cleaning, testing for complete Pump Set

Repairing and reconditioning of panel boards, starters single phase/three phase of Monoblock and jet pump for 0.5 HP, 0.75 HP, 1 HP, 1.5 HP, 2 HP, 3 HP, 5 HP and 7.5 HP capacities for supplying and fixing repairing and labour charges as directed during execution etc. (The rate is Excluding GST)

Repairing and reconditioning of panel boards, starters three phase of Mono block and jet pump for 10HP, 12.5HP, 15HP, 20HP and 25HP capacities for supplying and fixing repairing and labour charges as directed during execution etc. (The rate is Excluding GST)

Labour charges for CUTTING of G.I Pipes.

Labour charges for THREADING of G.I Pipes.