Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹38.9 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | L2₹40.6 L+₹1.7 L (4.37%)Rejected-Finance | L2 | Rejected-Finance Not lowest | |
| 3 | L3₹41.6 L+₹2.7 L (6.89%)Rejected-Finance 3 G 1 TALWANDI KOTA | KOTA | KOTA | RAJASTHAN | L3 | Rejected-Finance Not lowest |
Tender Value
₹38.5 L
EMD Value
₹77,000
Closing Date
25 Jan 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
HQ CWE Jaipur
Military Engineer Services, HQ Commander Works Engineer, Kalyan Marg, Banipark, Jaipur-06
CERTAIN REPAIR TO ROAD SURFACING IN VARIOUS LOCATION IN KOTA MILITARY STATION
2022_MES_571351_1
CWE/KOTA/82197/E8
Open Tender
Civil Works - Roads
Item Rate
120 days
GE Kota
enlisted with MES in Class D and above and category a (v) (Roads)
7 documents required · 7 mandatory
₹500
GE Kota
₹77,000
Yes
20 Mar 2023
26 Dec 2022
27 Jan 2023
26 Dec 2022
25 Jan 2023
10 Jan 2023
26 Dec 2022 - 9 Jan 2023
Amount
Scarifying or picking gravelled, macadam or bituminous macadam surfaces in area not exceeding 400 Sqm and depth exceeding 50 mm but not exceeding 100mm deep complete all as specified and directed.
M&L for 75 mm thick (compacted thickness) WBM with coarse aggregates (lime/sand store, flint or quartzite) of grading 2 (63 to 40 mm size) or grading 3 (50 to 20 mm size), spread, rolled and consolidated to required gradient, camber and super elevation to match with existing surface, rolled with 8-10 tonne power roller etc complete all as specified and directed.
M&L for premix bituminous macadam mixed laid with mechanical paver, 8 to 12 tonne power roller and compacted to required gradient and camber (Consolidated thickness 75mm or more) with paving bitumen 4% binder (viscosity grade VG-30) content by wt of total mix all as specified and directed. NOTE:- (i) Work shall be executed as per design mix (job mix formula) approved by GE. (ii) If the bitumen content as per design mix found to be less than 4%, it shall be recovered at the rate of Rs 60/- per Kg for short of bitumen. If bitumen content found to be more than 4% as per design mix same shall be provided without any extra cost to the Govt.
Repair to pot holes any depth, area not exc 1 sqm each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 30 mm in depth, making good by applying evenly a priming tack coat with bituminous primer VG-10 @ 05 Kg per 10 Sqm, & including providing bituminous premix asphaltic semi dense concrete 30 mm thick (consolidated thickness) with mechanical paver, mixed at hot mix plant transported to site in tippers, chipping mixed with 5.5% of paving binder (VG-30) viscosity grade, rolled to uniform smooth surface with 8 to 12 tonne power roller complete all as specified and directed.
M&L for preparing black top surfaces of road by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc, applying priming/ tack coat with bituminous primer (VG-10) viscosity grade @ 5 Kg per 10 Sqm & including providing bituminous premix asphaltic semi dense concrete 30 mm thick (consolidated thickness) with mechanical paver, mixed at hot mix plant transported to site in tippers, chipping mixed with 5.5% of paving binder (VG-30) viscosity grade, rolled to uniform smooth surface with 8 to 12 tonne power roller and compacted to required camber and gradient complete all as specified and directed. NOTE:- (i) Work shall be executed as per job mix formula approved by Accepting Officer. (ii) Bitumen content as per design mix is found to be less than 5.5%, the short of bitumen shall be recovered at the rate of Rs 60/- per Kg and no adjustment shall be made if the bitumen content as per design mix found to be more than 5.5% same shall be provided without any extra cost to the Govt.
M&L for cleaning and preparing the road surfaces for road marking with reflective thermoplastic white road marking paint conforming to BIS 3262, laid through road marking machine in a layer painting lines, dashes, arrows, letters etc on roads, pavements and the like exceeding 10 cm wide with road marking paint, white or golden yellow of CRYSTALEX, using 5 Kg material per square meter by incorporating the white glass beads for reflectivity in 100 mm width.etc complete all as specified & directed.
S&F in replacement solar cat eyes (studs) made of aluminium di-casted body, 100% waterproof, both side reflectors, designed according to IP 65 of size 125mm x 125mm x 25mm with shank not less than 60mm length, high efficiency mono crystalline solar panel (2.5 V/0.3 watt), one Ni-Mh or Ni-cd rechargeable battery (1.2 V/1600 MA) having six super bright LEDs with 10000 to 18000 mcd (millicandela) view distance upto 1000 metre and flush road bearing capacity 10 MT, fixing in road by drilling a hole and with epoxy hardener etc as per manufacturer’s instructions at the location etc complete all as specified and directed.
S&F in repairs metal tubular delineator made out of ABS round body fitted with 2 Nos 65mm dia highly reflective reflectors made out of PMMA and mounted on 45/ 50mm dia mild steel pipe of 600mm height duly powder coated and thermoplastic elastomer and 3 bands of green, red and yellow reflector radium tape of 25mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150 x150 x300mm) type B1 complete all as specified and directed . Make: Cat Part Model NO DA-74 of dark eye or equivalent in TATA BP/ Gogia Plastic /Red Safe /Froniter /Tata VPI as approved by GE.
Demolition Cement concrete (unreinforced ) concrete in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) and removal of excavated material exceeding 1.5 km to 5 km and depositing where directed at a level not exceeding 1.5 m above the starting point etc complete all as specified and directed.
M&L cement concrete 100 mm thick PCC type D2, (1:4:8) using 40 mm graded aggregate. etc complete all as specified and directed.
M&L for machine pressed precast concrete interlocking paver block, 60mm thickness, M-35 grade of any shape and size confirming to IS-15658-2006, with grey cement and pigment laid over and including providing 25mm thick sand cushion and joints of interlocking tiles filled with dry sand and compacted with mechanical plate vibrator etc complete all as specified & directed.
M&L for Precast cement concrete block masonary with solid block type B-1, (1:2:4) using 20 mm graded aggregate exc 10 cm in width and setting in mortar etc complete all as specified and directed.
M&L for PCC type B-1, (1:2:4) using 20 mm graded stone aggregate as in kerbs or mud stops, rounded or charmfered on edges etc complete all as specified and directed.
S&F for 2.00 mm thick aluminium sheet duly framed with angle iron 40x40x 5 mm size with the help of stainless steel nuts/ bolts/ aluminium rivets with front faces of aluminium sheet to be fully covered by blue diamond grade Micro prismatic type IX ASTM D-4956-01 standard retro reflective sheeting matter by overlay with colour film pasted over blue prismatic sheeting and back side painted with grey Epoxy paint etc complete all as specified and directed.
Manufacturing and supplying and fixing retro reflective overhead informatory road signage and boards, made up of 2mm thick aluminium sheet, face to be fully covered with high intensity and encapsulated lens type heat activated retro reflective sheeting conforming to type-III of ASTM D-4956-01 as approved by Engineer in Charge, letters, borders etc as per IRC:67-2001 in silver white with blue colour back ground and with high intensity grade, pasted on substrate by pressure sensitive adhesive backing which shall be activated by applying pressure confirming to class II of ASTM-D-4956-01 and fixing the same to the plate of structural frame work by means of suitable sized aluminium alloys, rivets, , bolts and nuts @ 300mm centre to centre all along the periphery as well as two vertical rows alongwith theft resistant measures including the cost of painting with two or more coats of epoxy paint in grey colour on the back side of aluminium sheet including appropriate priming coat. The rate includes the cost of rounding off the corners, lowering down the structural frame work from the guntry fixing and erecting the same in position all complete as per drawing specification and direction of the Engineer in Charge/ Garrison Engineer.
Preparation of any surface of any description not otherwise described exc 10cm width or girth and applying two coat synthetic enamel paint over new or previously untreated surface complete all as specified and directed.
S&F 2” height PVC speed breakers including UV stabilized with highly reflective reflectors moulded in PMMA material are welded with PE base plate through ultrasonic welding pressing and fixed with 6 Nos metalic bolts in 500mm length 370x50 mm all as specified and directed by Engineer in Charge.
Schedule of Credit
MAHARANI CONSTRUCTION
S AND A ENGINEERS CONSTRUCTION CO
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .