RequiredAnnual Turnover
RequiredOEM Annual Turnover Bid to RA enabled No Note: 1. OEM Turn Over Criteria: The minimum average annual financial turnover of the OEM of the offered product during the last three years
Requiredending on 31st March of the previous financial year
Requiredshould be as indicated in the bid document. Documentary evidence in the form of certified Audited Balance Sheets of relevant periods or a certificate from the Chartered Accountant/Cost Accountant indicating the turnover details for the relevant period shall be uploaded with the bid. In case the date of constitution/incorporation of the OEM is less than 3 year old
Requiredthe average turnover in respect of the completed financial years after the date of constitution shall be taken into account for this criteria. Crawler Hydraulic Excavator ( 3 pieces ) Technical Specifications * As per GeM Category Specification 1/11 Specification Specification Name Values Bid Requirement (Allowed Values) Generic Parameters Conforming IS/ISO 7135:2009 Hydraulic Excavator (Crawler) Yes Yes Make - * Model - * Type of the excavator Crawler * Operating mass 21250 Any applicable numeric value Shipping mass 21250 Any applicable numeric value Engine manufacturer and model - * Ignition type Diesel Diesel Type of cycle 4 Stroke 4 Stroke Aspiration mechanically turbocharged * No of cylinders 6 * Bore 102 * Stroke 120 * Displacement (cc) 5880 * Max Engine horsepower 140 More than 140.0 Or higher Maximum Engine torque (Nm@rpm) 571 556
Required571
Required655 Engine cooling system Liquid cooled * Type of fuel Diesel * Starter type - * Electrical system voltage (in volts) 24 * Bucket capacity to handle material of density 0.9 0.92
Required0.91
Required0.9
Required1.0 ISO net flywheel power at given engine speed (hp@rpm) 121 Any applicable numeric value Maximum swing speed 12.5 13
Required13.7
Required12.5 Reach at ground level 9100 9510.0
Required9100.0
Required9210.0
Required9740.0
Required9312.0
Required9250.0 Depth reach 5980 Any applicable numeric 2/11 value Travel speed 3.8 5.5
Required5.4
Required4.2
Required3.8
Required3.4 Gradeability (degree) 35 Any applicable numeric value Force at bucket curl at the Tip 129 Any applicable numeric value Stick crowding force 114 * Ground Pressure 0.58 * Operating weight 21250 Any applicable numeric value Draw bar pull 166 * Standard Boom 5700 5700.0
Required5850.0
Required5680.0 Standard Arm 2400 2400.0
Required2500.0
Required2420.0 maximum digging depth 5980 More than 5980.0 Or higher maximum digging Reach 9300 More than 9300.0 Or higher Rated Lift Capacity 5830 Any applicable numeric value fuel tank capacity 343 Any applicable numeric value Certification Vehicle Certification ARAI/VRDE/ICAT No * If No
Requiredmention the name of Vehicle Certification agency - * Vehicle Certification name and date - * Compliance with pollution standards
Requiredsafety standards of components and road worthiness as per CMVR rules Yes * Availibility of test report for the product from Any ILAC/NABl accredited/central government lab to be furnished to buyers on demand Yes * Responsibility of Registration with RTO Yes * IS/ISO 6165 : 2006 Earth moving machinery - basic types - Identification and Yes * 3/11 terms and definitions IS 11114 : 2006 Earth- moving machinery - Definitions of dimensions and codes: Part 2 base machine Yes * IS 11114 : 2006 Earth- moving machinery - Definitions of dimensions and codes: Equipment and attachments Yes * IS13116 : 2006 Earth- moving machinery -Engine Test Code - Net power Yes * Construction Parameters Overall length 9634 * Overall width 2890 * Overall heigth 3122 * Overall transport length 9634 * Width of upper structure 2549 * Track overall length 4460 * Track overall width when retracted 2890 * Track overall width when extended 2890 * Track shoe width 500 * Centre to centre - idler to sprocket 3660 * Upper structure ground clearance 1079 * minimum ground clearance 435 More than 435.0 Or higher Tail swing radius (standard) 2825 * Tail swing radius (counterweight) 2825 * Backfill Blade height 0 * Backfill blade width 0 * Backfill blade rise above ground 0 * Backfill blade dig depth 0 * Maximum Cutting height 9030 * 4/11 Maximum Loading height 6460 Any applicable numeric value Minimum Loading height 0 Any applicable numeric value Maximum vertical wall digging depth 6460 * Hydraulic pump system type - * Hydraulic pump flow at given pressure (L/hr) 26400 * Hydraulic pump flow at given speed (L/hr) 26400 * Hydraulic system fluid capacity 203 * Hydraulic system output 440 * Cooling systsem fluid capacity 25.5 * engine crankcase fluid capacity 19 * pump drive fluid capacity 440 * Swing reduction 110.73 * Swing circle lubrication - * Swing lock - * swing drive fluid capacity 5 * Filteration system - * Fuel filters - * Air Cleaners Yes * Type of Steering Power * Type of braking system Hydraulic * Type of final drive Planetary * final drive fluid capacity 5 * Type of Track - * Track dimensions 4460 * Ground Contact area 3.66 * Number of shoes on each side 49 * Number of carrier rollers 4 * 5/11 Number of track rollers 16 * Cab height 1760 * Crawler track height 885 * Clearance height under upper structure 1079 * Undercarriage overall width 2890 * Shipping height 3122 * Shipping height with guard rail 3122 * Shipping length 9534 * tail swing radius 2825 * Length to centre of rollers 2720 * Counterweight clearance 1079 * Right-side upper structure distance from axles of rotation 1274.5 * cab width overall 1040 * Track gauge with track extended 2890 * track gauge with track retracted 2890 * Crawler overall length 4460 * Sprocket axis to axis of rotation (in degress) 90 * Upper structure rearmost distance from axis of rotation 2825 * Maximum dumping height for shovel 6460 * Length of level floor cut 0 * Minimum level floor radius 0 * Muffler with rain cap Yes * Fuel Consumption for Earthwork application 15 * Maximum dig radius 9300 * Dig radius at groundline 9300 * Maximum dig depth 5980 Any applicable numeric value 6/11 Vertical straight wall dig depth 5980 * Dump height 6460 More than 6200.0 Or higher Overall reach height 9030 More than 8970.0 Or higher Bucket rotation 5470 * Arm digging Force 114 * Bucket Digging Force (ISO) 129 More than 125.0 Or higher Stick Digging Force (ISO) 114 Any applicable numeric value Bucket Digging Force (SAE) 117.3 * Stick Digging Force (SAE) 111.22 * Fully enclosed steel cabin with safety pipes window locking service doors and adjustable cushion seal Yes * Service hour meter Yes * Complete Instrumentation Yes * Starter key switch Yes * 2 working light and cabin light Yes * Electric Horn Yes * Parking brakes Yes * Emergency shut off Yes * Cabin/canopy :All round visible cabin
RequiredWith easy Walk Through Access Yes * Instrument Panel Yes * Cabin Instumental panel with audio indicators Yes * Cabin Instumental panel with visual indicators Yes * Seating Plan: Co- Adjustable driver seat with one helper seat Yes * Doors:-Front door with fixed toughened glass Yes * 7/11 & locking mechanism with wiper Glasses:-Front wind screen
Requiredrear glass in two pieces glass Yes * Paint:Standard automobile paint to the exterior body as per CVMR rules Yes * Rear view large convex mirror Yes * Front screen wiper Yes * Front and rear horn No * Number of roller 20 * Lift Path Yes * Cabin Entry and Exit Yes * Operation Control Yes * Length Without Attachment 5055 * Performance Parameters ISO net engine power (HP@rpm) 121 * Maximum travel speed (high) (km/hr) 3.8 * Maximum travel speed (low) (km/hr) 3.8 * Braking performance - * Tipping Load (kN) 51.46 Any applicable numeric value Digging Tool used Hoe * maximum force by Shovel/hoe/clamshell using arm cylinder (kN) 114 * maximum force by Shovel/hoe/clamshell using bucket cylinder (kN) 129 * Warranty time 1 * Operating hours during warranty period 0 Any applicable numeric value Battery warranty 1 * No Of Free services 9 * Transportation charge (in Rupess) 200000 * 8/11 Maintenance cost for first 5000 Hrs (in Rupees) 300000 * Excavator Self propelled machine on crawlers having an upper structure capable of 360 degree swing and with mounted equipment which is primarily designed for excavating with bucket without movement of undercarriage during work cycle Yes * Work cycle normally compromised excavating
Requiredelevating
Requiredswinging and discharging of material Yes * * Specifications highlighted in bold are the Golden Parameters. * Bidders may note that In respect of non-golden Parameters
Requiredthe specifications 'Values' chosen by Buyer will generally be preferred over 'Bid requirement ( allowed Values) by the Buyer. Additional Specification Documents
