CWE/HILLS/RKT/37 OF 2023-2024 SPL REPAIR OF ROAD FROM FRESH SHED TO LPG SHED OF SUPPLY AT RANIKHET UNDER GE RANIKHET

Amount

M&L for premix bituminous, macadam with binder content of 4% by weight of total mix using paving bitumen VG-30 grade, laid/ rolled and compacted to required gradient and camber (consolidated thickness 75mm or less) complete all as specified and directed. Note for item No. 01 & 04 :(i) Aggregates for Bituminous works shall confirm to clause No 20.B.2.5 of SSR 2009 Part- I (ii) Based on job mix formula, in case the binder content (i.e. Bitumen) is less than the content specified under these items then a minus adjustment @ Rs 60.00 per kg rate of bitumen (less consumption) shall be applied on the quoted rate of contractor against these items, hence the quoted rate of contractor shall be reduced based on less content of bitumen required as per job mix formula. However, no price adjustment on plus side shall be made for increase of quantity of bitumen in case of required as per job mix formula. (iii) Design Mix for bituminous macadam shall be carried out through an authorised testing lab and the cost of testing shall be included in quoted rate.

Preparing black top surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc. complete all as specified and directed.

M&L for applying evenly a priming/ tack coat with bituminous primer at 5 kg per 10 sq metre VG-10 (Paving bitumen) complete all as specified and directed.

M&L for bituminous premix asphaltic dense concrete 30mm consolidated thickness with 5.5% binder ( paving bitumen VG-30) content by weight of total mix as in semi dense asphaltic concrete rolled and compacted to reqd camber complete all as specified and directed

Scarifying or picking gravelled, macadam or bituminous macadam surfaces in area not exc 400 sqm and deep exc 50mm and not exc 100 mm complete all as specified and directed.

M&L for applying evenly a priming/ tack coat with bituminous primer at 10 kg per 10 sq metre VG-10 (Paving bitumen) on un-surfaced water bound macadam incl preparing surfaces by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc complete all as specified and directed.

S&F cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and incl MS stud of suitable size as per manufactures instructions complete all as specified and directed.

Manufacturing, supplying and fixing retro reflective Overhead informatory road signage and boards, made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity and encapsulated lens type heat activated retro reflective sheeting conforming to type - III of ASTM D-4956-01 as approved by Engineer-in-charge, letters, borders etc. as per IRC : 67-2001 in silver white with blue colour back ground and with high intensity grade, pasted on substrate by pressure sensitive adhesive backing which shall be activated by applying pressure conforming to class II of ASTM-D-4956-01 and fixing the same to the plate of structural frame work by means of suitable sized aluminium alloys, rivets or bolts & nuts @ 300 mm centre to centre all along the periphery as well as in two vertical rows along with theft resistant measures, including the cost of painting with two or more coats of epoxy paint in grey colour on the back side of aluminium sheet including appropriate priming coat. The rate includes the cost of rounding off the corners, lowering down the structural frame work from the gantry, fixing and erecting the same in position all complete as per drawings, specification and direction of the engineer-in-charge.(Structural frame work including M.S. plate to be provided separately. Rectangular area of the sheet only shall be measured for payment).

Demolition of brick work or stone/ boulder masonry, built in lime mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

M&L for 100mm thick Plain Cement concrete type D-2, 1:4:8 (using 40mm graded aggregate) as in sub base of floors complete all as specified and directed.

Demolition of cement concrete(un-reinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L for 75mm thick Plain Cement concrete type D-2, 1:4:8 (using 40mm graded aggregate) as in sub base of floors complete all as specified and directed.

M&L for sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade complete all as specified and as directed.

M&L for laying hot applied thermoplastic compound (paint) 2.50 mm thick including reflecting glass beads incl cost of all materials, labour, machinery, T&P etc. required for proper completion of work incl all other charges. The finished surfaces to be level, uniform and free from streaks and holes as per MORTH specification No. 803 as per IRC. Painting lines, dashes, arrows, letters etc. on roads, pavements and the like n exc. 10 cm wide with road marking paint, white or golden yellow complete all as specified and directed.

M&L for repair to continuous brick edging with width equal to the width of the brick, of whole sub class 'B' bricks, laid dry on end vertically including necessary earth work/removal of old damaged brick edging complete all as specified and directed.

M&L for cement concrete type C-2 1:3:6 (40mm graded aggregate) in surface channels and drain complete all as specified and directed.

Demolition of cement concrete(un-reinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed.

M&L for providing plain cement concrete type B-1, 1:2:4 (using 20 mm graded crushed stone aggregate) as in coping, bed block for embedding hold fasts, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles & throating as directed including necessary form work as required complete all as specified and directed.

M&L for pre-cast cement concrete block masonry with solid blocks, type C-1 1:3:6 (20 mm graded aggregate), exc. 10 cm in width and setting in cement mortar 1:4, complete all as specified and directed.

Taking down cement or cement lime plaster of any description on brick or PCC blocks or stone wall or concrete surface etc including racking out joints, hacking for keys, scrubbing down with water etc complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 using 20 mm graded agregate as in copings complete all as specified and directed.

M&L for rendering 15mm thick in cement mortar (1:4) on fair faces of brick work or cocrete surfaces and finished even and smooth including additional thickness is provided as floating/setting coat complete all as specified and directed.

M&L for two coats of synthetic enamel painting on brick, stone, concrete, asbestos cement or plaster surfaces over priming paints incl preparation of new or previously untreated surfaces of any description over 10 cm girth or width, not otherwise described complete all as specified and directed.

Dismantling structural steel work including doors, gates but excluding framed truss etc complete all as specified and directed.

M&L for framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete complete all as specified and directed.

Excavation in post holes each n exc 0.5 Cum getting out returning filling in and ramming earth or broken rubble mixed with earth around in layer not exceeding 25 cm in hard & dense soil complete all as specified and directed.

M&L for PCC 1:3:6 type C-1 as in foundation, and mass concrete using 40 mm graded stone agg complete all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mi-tred/stopped ends etc. complete all as specified and directed.

SS Construction Co

aditya construction