e-tender for the Renovation work at Kollam

Amount

e-tender for the Renovation work at Kollam For more details refer tender documents

Providing and applying white cement based putty of average thickness1mm,of approved brandand manufacturer,over the plastered wall surface to prepare the surface eve n and smooth complete

Wallpainting with premium acrylic emulsion pain to finterior grade,having VOC(Volatileincluding applying additional coats where required to achieve even shade and colour.Two coats

Supply and erection of TKT false ceiling for entire office hall (except record room) as per design with recessed ceiling , fitted with framework of G.I. Section of spacing 4'0" x 2'0" above with TKT panel of desired shade .Rate is included for cutouts for lights.

Providing and Fixing 1.5m long and 75cm wide counter type front office table made of 18 mm treated rubwood finished with clear polish,as per the agreed design comprising of the following in all respect.Table top and all vertical members are made of 18 mm rubwood finished with matt polish. Provide and fix 1 nos pull out drawer, one cupboard and 1 no key board hold etc , Drawer units are provided with telescopic channel,multipurpose lock,4"long brush steel handle,

Open type office shelves at full height (east side)and 1.6mht(at west side)fitted in 44cm depth, aligned and fixed with adequated number of shelves,allitem madeout of 18mm MR303 grade plywood

Providing and fixing 1.65m long and 75cm wide executive type table made of 18mm treated rubwood finished with clear polish, as per the agreed design comprising of the following in all respect, Table top and all vertical members are made of 18 mm rubwood finished with matt polish. Provide and fix 1 nos pull out drawer, one cupboard and 1 no key board hold etc , Drawer units are provided with telescopic channel, multi purpose lock,4"longbrush steel handle ,6mm plain glass to be laid one entire table top

Closed type office shelves 90 cm wide at a height of 180 cm and 44 cm depth, aligned and fixed with adequated number of shelves , fitted with autoclosing hinges , multitype lock and standard ss type handles,,item madeof 18mm polished rubwood finished in mattpolish,

Providing and fixing partition upto ceiling height consisting of G.I. frame and required board, including providing and fixing of frame work made of special section power pressed/ roll form G.I. sheet with Zinc coating of 120gms/(both side inclusive),consisting of floor and ceiling channel 50mm wide having equal flanges of 32 mm and 0.50 mm thick, fixed to the floor and ceiling at the spacing of 610 mm centre to centre with dash fastener of 12.5mm diameter 50mm length or suitable anchor fastener or metals crews with nylon plugs and the studs 48mm wide having one flange of 34mm and other flange 36mm and 0.50mm thick fixed vertically within flanges of floor and ceiling channel and placed at spacing of 610mm centre to centre by 6mm diabolts and nuts including fixing of studs along both ends of partition fixed flush to wall with suitable anchor fastner or metal screws with nylon plugs at spacing of 450mm centre to centre and fixing of boards to both side of frame work by 25mm long dry wall screws on studs other flanges floor and ceiling channels at the spacing of 300 mm centre to centre. The boards are to be fixed to the frame work with joints staggered to avoid through cracks, M.S. fixing channel of 99 mm width (0.9 mm thick having two flanges of 9.5 mm each) to be provided at the horizontal joints of two boards, fixed to the studs using metal to metal flat head screws, including jointing and finishing to a flush finish with recommended jointing compound, jointing tape, angle beads at corners (25 mm x 25 mm x0.5 mm), joint finisher and two coats of primer suitable for board as per manufacture's specification and direction of engineer in charge all complete.75mm over all thickness partition with12.5mm thick double skin fire rated board conforming to IS:2095:partI

Electrical Works

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile including applying additional coats wherever required to achieve even shade and colour.Two coats

Supply and erection of TKT false ceiling for entire office hall (except record room) as per design with recessed ceiling , fitted with framework of G.I. Section of spacing 4'0" x 2'0" above with TKT panel of disired shade. Rate is included for cutouts for lights.

Providing and fixing 1.5m long and 75cm wide counter type front office table made of 18mm treated rubwood finished with clear polish, as per the agreed design comprising of the following in all respect, Table top and all vertical members are made of 18 mm rubwood finished with matt polish. Provide and fix 1 nos pull out drawer, one cupboard and 1 no key board hold etc , Drawer units are provided with telescopic channel, multipurpose lock , 4" long brush steel handle ,

Open type office shelves at full height (east side ) and 1.6m ht (at west side) fitted in 44 cm depth, aligned and fixed with adequated number of shelves , all item made out of 18mm MR 303 grade plywood , internal and external surfaces finished with two coats of enamel paint over two coat of primer & one coats of putty

Providing and fixing 1.65m long and 75cm wide executive type table made of 18mm treated rubwood finished with clear polish, as per the agreed design comprising of the following in all respect, Table top

Closed type office shelves 90 cm wide at a height of 180 cm and 44 cm depth, aligned and fixed with adequated number of shelves , fitted with autoclosing hinges , multitype lock and standard ss type

2 ELECTRICAL WORK

IT PROFESSIONALS CO-OPERATIVE SOCIETY(ITPCOS)LTD.T-1959