REPAIRS TO FLOOR SUNKEN FLOOR RAIN WATER PIPES SOIL WASTE PIPES VERTICAL SHAFT STAIR CASE COMMON AREAS SANITARY FITTINGS ROOF TREATMENT AND CERTAIN MISC B R WORKS AT DOLPHIN HILL AND OTHER OTM ACCN AT DOLPHIN HILL VISAKHAPATNAM

Amount

Demolition of cement concrete of any description and in any position not otherwise specially provided for complete all as specified and as directed.

Rendering 10 mm thick on brick or concrete surfaces (sunken floors) in cement mortar 1:3 and finished even and smooth without using extra cement including mixing of water proofing compound wherever required after complete removal of dust/dirt to surface prior to plastering complete all as specified and as directed. Note: WPC shall be measured and paid separately.

Application of one coat of water based bitumen emulision primer @ 0.3 lit per sqm including cleaning of surface thoroughly from dust & dirt and laying APP based polymeric membrane minimum weight 3 Kg/Sqm and a minimum 3mm thick reinforced with polyster non-woven fabric (weight not less than 150gms/Sqm) shall be laid over a tack coat on roof and on vertical surface upto and insert in grooves and packed in CM (1:3) with adequate overlaps in members on each side.The over laps shall be sealed by flames or as per manufacturer's instuctions. A coat of hot blown bitumen @ 1.2 Kg/Sqm shall be applied over water proofing membrane all as specified and directed. MAKE : M/S HYPERPLAS IWL CHENNAI/M/S MULTIPLAS BY STP TEXES LIMITTED GOREGOAN/, M/S STP SUPERIOR POLY PLUS /BY STP LIMITED, KOLKATTA, M/S SHIVAM TAR PRODUCTS

PCC (1:5:10) type E2 using 40 mm graded stone aggregate as in filling and mass concrete complete all as specified and as directed.

PCC (1:1.5:3) type A1 using 20 mm graded stone aggregate as bases to roof slab of affected roof including mixing of water proofing compound wherever required after complete removal of dust/dirt to surface complete all as specified and as directed. Note: WPC shall be measured and paid separately. The application of WPC as per manufacturer instructions.

25 mm thick (average), PCC 1:2:4, Type B0, using (12.5mm graded aggregate) as in make to slope in sunken floors / levelling course to roof complete all as specified and as directed.

Dismantling wall floor or hearth tiling including cement mortar bedding but not backing and rubbish off the premises complete all as specified and as directed.

Glazed ceramic coloured tiles in vertical surface 300x200x7 mm thick set and jointed in neat cment slurry and pointed in clolured cement to match coloured tiles including Rendering 10 mm thick on fair faces of brick work or concrete surface of brick work or concrete surfaces in CM 1:4 as in backing coat to dado/ skirting complete all as specified and as directed. Make: Kajaria Ceramics Ltd / Asian Granito India Ltd / Somany Ceramics Limited / Varmora Granito Pvt Ltd / H & R Johnson India Ltd / Nitco / Orient Bell Ltd

Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match coloured tiles including Rendering 10 mm thick on fair faces of brick work or concrete surface of brick work or concrete surfaces in CM 1:4 as in backing coat to dado/ skirting complete all as specified and as directed. Make: Kajaria Ceramics Ltd / Asian Granito India Ltd / Somany Ceramics Limited / Varmora Granito Pvt Ltd / H & R Johnson India Ltd / Nitco / Orient Bell Ltd

Non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exc 0.06 but n exc 0.11 sqm in floors, set and jointed in neat cement slurry and pointed in coloured cement to match coloured tiles including screed bed or bedding layer 15 mm thick in CM 1:6 complete all as specified and as directed. Make: Kajaria Ceramics Ltd / Asian Granito India Ltd / Somany Ceramics Limited / Varmora Granito Pvt Ltd / H & R Johnson India Ltd / Nitco / Orient Bell Ltd

Non-skid ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed or bedding layer 15 mm thick in CM 1:6 complete all as specified and as directed. Make: Kajaria Ceramics Ltd / Asian Granito India Ltd / Somany Ceramics Limited / Varmora Granito Pvt Ltd / H & R Johnson India Ltd / Nitco / Orient Bell Ltd

Vitrified Ceramic tiles 8 to 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed or bedding layer 15 mm thick in CM 1:6 complete all as specified and as directed. Make: Kajaria Ceramics Ltd / Asian Granito India Ltd / Somany Ceramics Limited / Varmora Granito Pvt Ltd / H & R Johnson India Ltd / Nitco / Orient Bell Ltd

Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed or bedding layer 15 mm thick in CM 1:4 complete all as specified and as directed. Make: Kajaria Ceramics Ltd / Asian Granito India Ltd / Somany Ceramics Limited / Varmora Granito Pvt Ltd / H & R Johnson India Ltd / Nitco / Orient Bell Ltd

Terracotta tiles 10 to 15 mm thick (elevation tiles) grooved pattern as approved by GE, set and jointed in cement slurry and pointed with white cement and pigment to match with colour of tiles including screed bed or beddinglayer of cement mortar , 15 mm thick complete all as specified and directed. (Note:- The rate quoted by the contractor shall be deemed to include for the necessary scaffolding that is required for working over roof upto 4 stories).

Cement concrete tiles 30cm x 30cm x 20 to 25mm thick, machine pressed; set, jointed and pointed in neat cement slurry in floors, and cut and polished including 15 mm thick screed bed or bedding layer in CM 1:4 for laying cement concrete tiles complete all as specified and as directed. Note:- The rate quoted by the contractor shall be deemed to include for the necessary scaffolding that is required for working over roof upto 4 stories). Make : Bharat Tiles & Marble Pvt Ltd / National Tiles & Industries Pvt Ltd / Nitco Tiles Pvt Ltd / Nimco Tiles / Metro Tiles Bombay / Vitco Tiles Bombay / Mehtab Tiles

Cement concrete tiles 25cm x 25cm x22 mm thick, with grey cement & pigment machine pressed; set, jointed & pointed in neat cement slurry in floors, & cut & polished over 15mm thick screed in CM 1:6 complete all as specified and as directed. Make : Bharat Tiles & Marble Pvt Ltd / National Tiles & Industries Pvt Ltd / Nitco Tiles Pvt Ltd / Nimco Tiles / Metro Tiles Bombay / Vitco Tiles Bombay / Mehtab Tiles

PCC in roof kerbs of mud stops, rounded or chamfered on edges,as benching to parapet type B1 (1:2:4) using 20 mm graded aggregate complete all as specified and as directed.

Demolition of reinforced concrete of any description and in any position not otherwise specifically provided for (reinforcement cut as required to facilitate demolition) complete all as specified and as directed.

RCC type B1 (1:2:4) using 20 mm graded aggregate in Slabs supported on walls, beams and columns in floors/roofs,benching to parapet wall & slab junction, landings, blaconies, canopies, deck slabs and in shelves and the like similar item complete all as specified and as directed. (Note:- The rate quoted by the contractor shall be deemed to include for the necessary scaffolding that is required for working over roof upto 4 stories).

Mild steel TMT bars 6 to 8 mm dia., and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips complete all as specified and as directed.

Mild steel TMT bars 10mm dia & over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality complete all as specified and as directed.

Formwork to edges of concrete flats, breaks in floors, openings in concrete walls, floors, roofs & sides of RCC/ PCC bands in walls, horizontal or sloping, and similar work all exc. 20cm wide. Fair finished surfaces of concrete flat complete all as specified and as directed.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings beams & similar work; not exc. 200m thick (Horizontal or sloping) Fair finished surfaces of concrete flat complete all as specified and as directed.

Formwork to sides of pillars, posts, struts, piers,columns, and stanchions Rough finished surfaces of concrete Square, rectangular or polygonal complete all as specified and as directed.

Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor & roofs exc 5cm but n exc 10 cm wide & sides of RCC/PCC bands in walls, horizintal or sloping & similar work exc 05 cm but n exc 10cm wide Roughed finished surface of concrete complete all as specified and as directed.

In repairs 75 mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and as diretced. Make : Jain Irrigation / Kisan / Supreme / Prince / Anant / Oriplast

In repairs 75 mm PVC (SWR) multi floor trap with grating including jointing with solvent cement complete all as specified and as directed. Make : Jain Irrigation / Kisan / Supreme / Prince / Anant / Oriplast

PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and as directed. Make : Jain Irrigation / Kisan / Supreme / Prince / Anant / Oriplast

Taking down PVC pipes including all fittings in any size and pattern complete all as specified and as directed.

S&F 75 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors. Make : Supreme / Prince / Jain Irrigation / Kisan / Anant / Oriplast

110 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed. Make : Supreme / Prince / Jain Irrigation / Kisan / Anant / Oriplast

S&F 75 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed. Make : Supreme / Prince / Jain Irrigation / Kisan / Anant / Oriplast

110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed. Make : Supreme / Prince / Jain Irrigation / Kisan / Anant / Oriplast

75 mm dia PVC (SWR) bends any radius complete all as specified and as directed. Make : Supreme / Prince / Jain Irrigation / Kisan / Anant / Oriplast

75 mm dia PVC (SWR) branch piece, single (single Y) equal or unequal complete all as specified and as directed. Make : Supreme / Prince / Jain Irrigation / Kisan / Anant / Oriplast

75 mm dia PVC (SWR) branch piece, double (double Y) equal or unequal complete all as specified and as directed. Make : Supreme / Prince / Jain Irrigation / Kisan / Anant / Oriplast

75 mm dia PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and as directed. Make : Supreme / Prince / Jain Irrigation / Kisan / Anant / Oriplast

75 mm dia PVC (SWR) junction double, (double T), equal or unequal complete all as specified and as directed. Make : Supreme / Prince / Jain Irrigation / Kisan / Anant / Oriplast

110 mm dia PVC (SWR) bends any radius complete all as specified and as directed. Make : Supreme / Prince / Jain Irrigation / Kisan / Anant / Oriplast

110 mm dia PVC (SWR) branch piece, single (single Y) equal or unequal complete all as specified and as directed. Make : Supreme / Prince / Jain Irrigation / Kisan / Anant / Oriplast

110 mm dia PVC (SWR) branch piece, double (double Y) equal or unequal complete all as specified and as directed. Make : Supreme / Prince / Jain Irrigation / Kisan / Anant / Oriplast

110 mm dia PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and as directed. Make : Supreme / Prince / Jain Irrigation / Kisan / Anant / Oriplast

110 mm dia PVC (SWR) junction double, (double T), equal or unequal complete all as specified and as directed. Make : Supreme / Prince / Jain Irrigation / Kisan / Anant / Oriplast

Taking out existing unserviceable water closet and supply & fix in repairs vitreous China squatting water closet pan, ORRISA pattern of size 580 x 440 mm, white with integral foot rest to fix of any branded approved make complete all as specified and as directed. Make :M/s. Parry ware / M/s. Hindusthan Sanitary ware & Industries Ltd / M/s. Neycer Kemberg / M/s Cera ( All are 1st quality)

Taking down existing unserviceable water closet and S&F in repairs Vitreous Ware wash down water closet [Pedestal Pattern], white [ETWC] including plastic water closet seat back closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device and 'P' or 'S' trap of any branded approved make complete all as specified and as directed. Make :M/s. Parry ware / M/s. Hindusthan Sanitary ware & Industries Ltd / M/s. Neycer Kemberg / M/s Cera ( All are 1st quality)

10 litres capacity PVC low level flushing cistern including brackets complete, fixed in repairs (of any branded approved make) all as directed and as specified. Make- Slim Line from Parry ware,Hindware,Cera

In repairs PVC connections of 15mm dia and 450 mm long complete all as specified and as directed.

In repairs 110 mm dia Stainless steel grating fixed with white cement complete all as specified and as directed.

In repairs 15mm bore chromium plated Bib tap (long body) with wall flange complete all as specified and as directed. Make :-Jaquar cat No. FLR-CHR- 5047 N or equivalent in Cera

In repairs chromium plated 15 mm 2 way bib cock with wall flange complete all as specified and as directed. Make :-Jaquar cat No. FLR-CHR-5041 N or equivalent in Cera

In repairs 15 mm chromium plated angle cock with wall flange complete all as specified and as directed. Make :-Jaquar cat No.FLR-CHR-5053N or equivalent in Cera

In repairs chromium plated 3 in 1 CP wall mixer complete all as specified and as directed. Make :-Jaquar cat No.FLR-CHR-5273 UPR or equivalent in Cera

In repairs chromium plated toilet paper holder complete all as specified and as directed. Make :-Jaquar /Cera

In repairs chromium plated over head shower complete all as specified and as directed. Make-Jaquar cat No.OHS-1719 or equivalent in cera

In repairs Brass CP shower rose 125mm size with swivel joint complete all as specified and as directed. Make- Jaquar /Kohler / Cera / Parryware

In repairs CP Pillar taps fancy type 15 mm bore, cast copper alloy, with capstan heads screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks & fly-nuts, screwed for iron pipe complete all as specified and as directed. Make: M/s Hindware / Orient / Seiko / Dripless

In repairs chromium plated central hole basin mixer (CHB) for wash basin complete all as specified and as directed. Make :-Jaquar cat No.FLR-CHR-5167NB or equivalent in Cera

In repair Angle / stop valves 15 mm dia bore, (any type) cast copper alloy, screwed down, high pressure, with crutch or butterly handle, fancy type, screwed both ends for iron pipe or for unions. Make :-Jaquar cat No.FLR-CHR-5053N or equivalent in Cera

In repairs PVC Body Cabinet Mirror of size 350mm X 450mm X 100mm in PTMT alloy of approved design and pattern complete all as specified and directed. Make: Supreme / National / Alphina / Prayag.

PVC hand spray (Health faucet) with wall hook complete all as specified and as directed.

CP Health Faucet complete all as specified and as directed. Make : Jaquar ALD-573 or equivalent in Cera

Dismantling of 100/75mm dia cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out of from walls & floor, if required.

100mm dia Cast iron soil, waste and vent pipes in any length with or without ears, with cement joints but fixed to walls with secured fixing complete all as specified and as directed. Make: Electrosteel / Kesoram / Tisco

100mm dia Cast iron soil, waste and vent pipes in any length with or without ears, with cement joints laid in trenches or in floors complete all as specified and as directed. Make: Electrosteel / Kesoram / Tisco

100 mm Cast Iron Bends (any radius), diminishing pieces or tapers (larger bore measured) complete all as specified and as directed.

100mm bore Cast iron Branch pieces, single (equal or unqual), ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and as directed.

100mm bore Cast iron Branch pieces, double (equal or unqual), ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and as directed.

100mm bore Cast iron Sockets (double, collars) complete all as specified and as directed.

75 mm dia Cast iron soil, waste and vent pipes in any length with or without ears, with cement jointsbut fixed to walls ,if required complete all as specified and as directed. Make: Electrosteel / Kesoram / Tisco

75 mm dia Cast iron soil, waste and vent pipes in any length with or without ears, with cement joints laid in trenches or in floors complete all as specified and as directed. Make: Electrosteel / Kesoram / Tisco

S&F 75 mm Bends (any radius), diminishing pieces or tapers (larger bore measured) complete all as specified and as directed.

75mm bore Cast iron Branch pieces, single (equal or unqual), ordinary or inverted (spigot or socket type) or with parallel branches

75mm bore Cast iron Branch pieces, double (equal or unqual), ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and as directed.

75mm bore Cast iron Sockets (double, collars) complete all as specified and as directed.

In repairs Vitreous China Ware Wash hand basin white, flat back, size 550 x 400 mm size (flat back or angle back type) including cutting for and pinning ends of brackets or erecting stand including pedestal complete all as specified and as directed. Make:M/s Parry Ware or equivalent in Prayag / Kohler / Roca / Cera [First Quality] / Hindware [Italian Collection]

In repairs Vitreous oval china wash hand basin white with counter top of marble of size of 550x400 mm including brackets, waste coupling PVC waste pipe complete all as specified and as directed. Make: Cera Cat No: COLUMBIA S2020125 Wash Basin 430 mm dia.or equivalent in Roka

In repairs wash basin in full pedestal incl waste pipe complete all as specified and as directed. MAKE : JAQUAR Cat log no ARS-WHT 39801 and pedestal ARS-WHT-39301

Sensor Urinal White with out sensor including all fixing fixtures complete all as specified and as directed. Make - Cera White Sensor Urinal or equivalent as approved by GE.

Sensotronic Sensor Flushing Valve for Urinal with Complete Kit (Suitable For Urinal as per item above) complete all as specified and as directed. Make :- Cera or equivalent as approved by GE.

In repairs 32 mm dia GI pipe medium grade in short lengths for spouts including cutting holes in walls and making good with CM (1:3) complete all as specified and as directed. Make: Surya Roshni Ltd / Tata / Jindal steel / Prakash

In repair 15 mm bore angle stop valves of PTMT any colour pressured screwed for iron pipe complete all as specified and as directed. Make: Prayag Polymer Pvt. Ltd. / Polytuff

In repair sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes jalli, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to waste pipe complete overall size 915 mm x 460 mm bowl size 410 mm x 330 mm x 160mm complete all as specified and as directed. MAKE : BLUE STAR / JAYNA / NIRALI

S&F in repair sinks stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes jalii, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and commecting union to waste pipe overall size 495 mm x 420 mm bowl size 410 mm x 330 mm x 160mm complete all as specified and as directed. MAKE : BLUE STAR / JAYNA / NIRALI

In repairs Low density waste pipe 32 mm bore with polyethylene union and check nuts 900mm long suitable to steel sink waste complete all as specified and as directed.

In repairs of waste coupling of any size and dia for stainless steel sink with drain board or without drain board complete all as specified and as directed.

In repairs plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminized hinge device complete all as specified and as directed. Make :Johnson pedder or parryware.

In repair of hinging device only of seat cover for (EWC) complete all as specified and as directed. Make :Johnson pedder or parryware.

In repair of P or S trap for (EWC) with making good to distrubed surfaces complete all as specified and as directed. Make :Johnson pedder or parryware.

Demolition of brick work or stone / boulder masonry, built in cement mortar including all quoins, pillars etc., and disposal off unserviceable materials, debris to out side MD land complete all as specified and as directed.

Brick work with fly ash bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:6 complete all as specified and as directed.

Brick work with fly ash bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 including provision of 2Nos 8mm dia TMT bars at every fourth course complete all as specified and as directed

Taking down cement plaster on brick or stone or concrete surface including raking out joints, hacking for key scrubbing down with water, etc.

Rendering 10 mm thick on brick work or concrete surfaces in cement mortar 1:6 finished even and smooth (with out using extra cement) complete all as specified and as directed.

Rendering 15 mm thick on brick or concrete surfaces in cement mortar 1:4 finished even and smooth without using extra cement complete all as specified and as directed.

Rendering 5mm thick on concrete surfaces in cement mortar 1:3 in ceiling and finished even and smooth without using extra cement complete all as specified and as directed.

Providing 20 mm thick cement plaster in two layers ,first layers 10 mm thick cement plaster in CM (1:6) & second layer in CM(1:4) with WPC @ 3% by WT of cement including secured with chicken wiremesh ,on fair faces of brick work or concrete surfaces complete all as specified and as directed.

Plastering 1:4 for work in isolated widths or in widths not forming part of general plastering such as in bands, sunk panels, cornices, skirtings, drip moulds & similar work exc 15cm but n exc 30cm in width or girth; including cutting to edges, all mitres & stopped ends, etc. complete all as specified and as directed.

Rendering or plastering15mm in CM 1:6 for work in isolated widths or in widths not forming part of general plastering such as in bands, sunk panels, cornices, skirtings, drip moulds & similar work n exc 15cm in width or girth; including cutting to edges, all mitres & stopped ends, etc. complete all as specified and as directed.

Rendering 5mm thick on concrete surfaces in cement mortar 1:3 in ceilings and finished even and smooth without using extra cement at isolated place and more than First Floor height including three coat of white wash with necessary scaffolding complete all as specified and as directed.

Complete removal of existing treatment on walls / slab and applying two coats of water proofing chemical Dr. Fixit New Coat Ezee over a coat of Dr.Fixit prime seal coat Mfd by Pidilite Industries complete all as specified and as directed.

Applying three coats of white wash including preparation of newly plastered ceiling surfaces complete all as specified and as directed.

Applying three coats of white wash including preparation of newly plastered wall surfaces complete all as specified and as directed.

Preparation of newly treated wall surfaces and applying a two coats of distemper oil emulsion over a coat of birla white putty complete all as specified and as directed.

Preparation of newly plastered surface of wall and applying two coats of weather proof paint over a coat of primer all as per manufacturer's instructions, complete all as specified and as directed. Make : Apex ULTIMA from Asian Paints or equivalent in All Guard from Berger, Weather Shield Max Exterior Acrylic from ICI Dulux (Note:- The rate quoted by the contractor shall be deemed to also include for the necessary scaffolding that is required for working over roof upto 4 stories).

Dismantling wrought iron or mild steel work of any description not otherwise provided for such as Mild steel stair case in hand rails complete all as specified and as directed.

Dismantling structural steel work including doors, gates but excluding framed truss etc. complete all as specified and as directed.

Mild Steel Hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled & countersunk for balusters running bars, for doors,balusters, nosing to steps including embedding in concrete & screwing etc. wind ties for roof including securing bolts; posts & struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., & similar work conforming to Fe 290-0 Gde E-165 complete all as specified and as directed.

Steel work in tubular/angel including MS flat trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St - 240 painted one shop coat of red oxide primer complete all as specified and as directed.

Mild Steel Framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors, and gates; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe Fe 290 Gde E-165 including spikes or flowers or any other onamental piece works of any number and necessary welding or fixing with screws, PINTLE hinges etc complete all as specified and as directed.

Preparation of old painted steel surfaces of any description, over 10cm width or girth, not otherwise described and applying one coat of synthetic enamel paint complete all as specified and as directed.

Applying two coats of synthetic enamel paint on steel & iron surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of new surface & applying one coat of red oxide, zinc chrome complete all as specified and as directed. Make : M/s. Asian Paints [Apcolite], M/s. Berger Paints [Luxol], Jenson & Nicholson [Brolac].

Applying two coats of synthetic enamel paint on steel & iron surfaces of any description, n exc 10cm width or girth when unconnected with other painting or when painted in different tint, including preparation of new surface & applying one coat of red oxide, zinc chrome primer complete all as specified and as directed. Make : M/s. Asian Paints [Apcolite], M/s. Berger Paints [Luxol], Jenson & Nicholson [Brolac].

Applying one coat of synthetic enamel paint on steel & iron surfaces of any description, n exc 10cm width or girth when unconnected with other painting or when painted in different tint including preparation of old painted surface with one coat of red oxide, zinc chrome primer complete all as specified and as directed. Make : M/s. Asian Paints [Apcolite], M/s. Berger Paints [Luxol], Jenson & Nicholson [Brolac].

In repairs second class clean swan hard wood in scantling as door and window frame including to replace old and decayed timber (including piecing, scarfing, etc., of old and new timbers if required) and removing defective portions to store complete all as specified and as directed.

Applying two coats of synthetic enamel paint on wooden surfaces of any description, n exc 10cm width or girth when unconnected with other painting or when painted in different tint, including preparation of new surface & applying one coat of pink primer complete all as specified and as directed. Make : M/s. Asian Paints [Apcolite], M/s. Berger Paints [Luxol], Jenson & Nicholson [Brolac].

Applying two coats of synthetic enamel paint on wooden surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of new surface & applying one coat of pink primer complete all as specified and as directed. Make : M/s. Asian Paints [Apcolite], M/s. Berger Paints [Luxol], Jenson & Nicholson [Brolac].

Providing and injecting chemical emulsion for Post Constructional Antitermite Treatment of soil under existing floors using emulsion @ one litre per hole or till refusal by the hole with application of pressure pump, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors complete all as specified and as directed.

Providing and injecting chemical emulsion for Post Constructional Antitermite Treatment along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron complete all as specified and as directed.

Providing and injecting chemical emulsion for Post Constructional Antitermite Treatment at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same.

Complete removal of existing treatment on walls/ slab and applying two coats of water proofing chemical Dr. Fixit New Coat Ezee over a coat of Dr.Fixit prime seal coat Mfd by Pidilite Industries complete all as specified and as directed.

PCC in foundations, filling and mass-concrete type C2 (1:3:6) using 40 mm graded stone aggregate complete all as specified and as directed.

75mm thick PCC type B-1, (1:2:4) using 20mm graded stone aggregate Finished even & smooth without using extra cement complete all as specified and as directed.

Forming Contraction (Dummy) joints 65 mm deep x 10mm wide, filled with sealing compound Grade 'A' as in plinth protection complete all as specified and as directed.

Removing of old existing water proofing treatment to roof ,Roughening surfaces of old concrete floor or concrete surface by picking , sweeping clean and washing down with water to remove dust etc., M&L for 10 mm thick screed bed in CM 1:4 using WPC over 25 mm thick PCC 1:2:4 type B-0 (12.5mm graded aggregate), as in levellig course , Supply and lay HYPERPLAS-STANDARD 3kg/sq.m. polymeric water proofing membrane incorporating a centre core of 90 micron thick HMHDPE film including coating the surface with a coat of water based bituminous primer @ 100gms/sq.m., followed by a coat of blown bitumen of grade 85/25 or 90/15 @ 1.2kg/sq.m. each at top and bottom of the membrane including sealing all joints by thermo fusion with minium 10cm overlap incl grovving & inserting in parapt wall all as per manufacturers instructions complete all as specified and as directed. MAKE : M/S HYPERPLAS IWL CHENNAI/M/S MULTIPLAS BY STP TEXES LIMITTED GOREGOAN/, M/S STP SUPERIOR POLY PLUS /BY STP LIMITED, KOLKATTA, M/S SHIVAM TAR PRODUCTS

Supply only intergral waterproofing compound

Demolition of stone slabs and tiles of any description or thickness in floors, etc. laid bedded and pointed in any mortar complete all as specified and as directed.

Machine cut kota stone 20-25 mm thick for steps,landing of staircase, slab as in kitchen platform, over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over screed bed 15 mm thick in CM (1:4) complete all as specified and as directed.

Kota stone slab 20-25 mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over 10 mm thick CM (1:4) complete all as specified and as directed. Note: Kota Stone slab to be provided to treads of steps shall be in one piece with rounding off edge on front face.

Marble work 18 to 20 mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in CM 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with marble shade of Makrana White over 15 mm thick Screed in CM 1:4 complete all as specified and as directed.

Marble work 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in CM(1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade of Makrana White over 15 mm thick Screed in CM (1:6) complete all as specified and as directed.

18 to 20mm thick Granite (of any tpe) work (table rubbed and polished) in steps, jambs, pillars, window cills,cooking platforms and like in CM(1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 15 mm thick Screed in CM (1:6) complete all as specified and as directed.

Taking up & down steel tubing 15mm bore & connections, including cleaning for re-fixing or removal to store complete all as specified and as directed.

Refixing old steel water tubing 15mm bore and connections in new or old position (walls, ceiling, floors etc) complete all as specified and as directed.

GI tubing of size 15mm dia, medium grade, laid in floors/walls complete all as specified and as directed.

Taking up or down 20 mm bore steel tubing and connections, including cleaning for refixing or removal to store.

Refixing old steel tubing of 20 mm bore and connections in new or old position (walls, ceilings, floors etc.) complete all as specified and as directed.

20 mm bore Galvanized Steel tubes, medium grade with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and as directed.

Taking up or down 25 mm bore steel tubing and connections, including cleaning for Refixing or removal to store complete all as specified and as directed.

Refixing old steel tubing of 25 mm bore and connections in new or old position (walls, ceilings, floors etc.) complete all as specified and as directed.

25 mm bore Galvanized Steel tubes, medium gradewith all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and as directed. Make : Surya Roshni Ltd / Tata / Jindal steel / Prakash

Taking up or down 32 mm bore steel tubing and connections, including cleaning for Refixing or removal to store complete all as specified and as directed.

Refixing old steel tubing of 32 mm bore and connections in new or old position (walls, ceilings, floors etc.) complete all as specified and as directed.

32 mm bore Galvanized Steel tubes, medium gradewith all fittings and fixed complete to walls and ceiling or laid in floors

Stack clamps out of 50 mm x 5mm flat iron & 16mm dia round iron stays. Including bolts & nuts & securing ends of stays to wall or roof for 75 mm bore pipe complete all as specified and as directed. Note:-The work has to performed upto 4th floor for fixing of if any missing pieceses

Stack clamps out of 50mm by 5mm flat iron & 16mm dia round iron stays. Including bolts & nuts & securing ends of stays to wall or roof for 100 mm bore pipe complete all as specified and as directed. Note:- The work has to performed upto 4th floor for fixing of if any missing pieces.

Taking up or down of 16 mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings and connections, including cleaning for refixing or removal to store complete all as specified and as directed.

Refixing old 16 mm bore CPVC pipes and connections in new or old position (walls, ceiling, floors etc) complete all as specified and as directed.

In repairs of 16 mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings with fittings accessories (brass elbow,T, MTA/MBTA,FTA /FBTA, Union etc. ) in concealed to wall / ceilling , trenches or laying to floor exposed surface with properly secured for portable water complete all as specified.

Taking up or down of 20 mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings and connections, including cleaning for refixing or removal to store complete all as specified and as directed.

Refixing old 20 mm dia CPVC pipes and connections in new or old position (walls, ceilings, floors etc.) complete all as specified and as directed.

In repair of 20 mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings with fittings accessories(brass elbow,T,MTA/MBTA,FTA /FBTA,Union etc) in concealed to wall/ceilling ,trenches or laying to floor exposed surface with properly secured for portable water complete all as specified and as directed.

Taking up or down of 25 mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings and connections, including cleaning for refixing or removal to store complete all as specified and as directed.

Refixing old 25 mm dia CPVC pipes and connections in new or old position (walls, ceilings, floors etc.) complete all as specified and as directed.

In repair of 25 mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings with fittings accessories(brass elbow,T, MTA/MBTA, FTA /FBTA, Union etc.) in concealed to wall / ceilling , trenches or laying to floor exposed surface with properly secured for portable water complete all as specified and as directed.

Taking up or down of 32 mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings and connections, including cleaning for refixing or removal to store complete all as specified and as directed.

Refixing old 32 mm dia CPVC pipes and connections in new or old position (walls, ceilings, floors etc.) complete all as specified and as directed.

In repair of 32mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings with fittings accessories(brass elbow,T,MTA/MBTA,FTA /FBTA,Union etc) in concealed to wall/ceilling ,trenches or laying to floor exposed surface with properly secured for portable water complete all as specified and as directed.

Removing building materials etc., (other than spoil payable under items 03028 to 03031 in Section-3—Earthwork) to a distance of 5km, beyond the lead included in the rates, including loading, unloading and stacking at the destination complete all as specified and as directed.

Cutting/chipping the spalling concrete surfaces of columns, beams facias, slabs & cartilevers etc., and trimming cleaning the surfaces of any thickness to receive guniting/plastering including necessary scafolding complete all as specified and as directed.

Material and Labour for filling polymer modified non shrinking slurry for sunken floors for toilets by drilling holes to a depth of 60mm by 20mm dia at 0.5 mtr interval and applying slurry all as per technical specification for work upto 4th floor complete all as specified and as directed.

Providing pressure guniting on existing pealed concrete surfaces 30mm thick average in cement mortar 1:3 for Columns /fins / Beams/soffits of slabs, parapets, Chajjas etc. and applying Epoxy Treatment [Nito Bond AR of M/s. Fosroc / suitable chemical in M/s. Dr. Fixit / Araldite] and application of one coat of nito zinc primer to exposed reinforcement where required prior to guniting to facilitate proper bonding with old surfaces complete all as specified and as directed. Note : The rate quoted shall be deemed to be inclusive of necessary steel scaffolding and removal of the same after completion of work.

Precast cement concrete type B0 (1:2:4) using 12.5 mm graded aggregate set in CM (1:4) louvres and jallies, 35 mm thick (measured solid), including all mouldings but excluding frame complete all as specified and as directed.

Cutting holes into or through brick walls built in cement mortar or cement lime mortar & stone walls built in lime mortar and making good in CM(1:3) or PCC(1:2:4) type B-1 as required Superficial area n exc 150 Sq cm complete all as specified and as directed.

Wire netting 12mm size of galvanised steel wire 1.4mm dia fixed with tinned tacks of stainless steel wire staples complete all as specified and as directed.

Filling of cement moratar in sides of nahani trap, gully trap, rain water pipes outlet etc CM 1:3 by including WPC and making good finishes to arrest leakage/seepage complete all as specified and as directed.

Repairing CI/PVC pipe, leaking from joint between floor trap and CI/PVC pipe bend of any dia. Repairing work included applying CM 1:3 with Water proofing compound and making good finishes to arrest leakage from outlet of CI/PVC pipe complete all as specified and as directed. Note : Work to be carried out from outside of building upto 4th floor.

Raking and cleaning of affected tiles joints in toilet/bath portion and applying white cement in joints at 1:3 ratio to floor & wall up to 1.00 m height for water tightness of affected area only complete all as specified and as directed.

Cutting of saplings of any size from buildings in any situation & at any height including removal of roots from roof/wall including applying root killer chemical as per manufacturers instructions and making good disturbed portion with PCC 1:2:4 Type B0 (using 12.5 mm graded stone aggregate) including removal of debrish on terrace or shaft portion of Building complete all as specified and as directed.

Repairing of cracks by Cutting out cracks to V-section to a depth of 50 mm minimum or to the full depth of crack in existing roofs or terracing, cleaning out, wetting, grouting with cement and sand slurry 1:3 mixed with water proofing chemical and brush bond of FOSROC Chemical as per manufacturer instructions complete all as specified and as directed.

Precast cement concrete type B1 (1:2:4) using 20 mm graded aggregate set in CM(1:4) in landings, cover slabs (for manholes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces complete all as specified and as directed.

Aluminium anodised snap grid frame work for false ceiling of grid size 605 x 605 mm with Aluminium "T" section of size 38 x 25 x 1.50 mm thick for main runners, 25 x 25 x 1.5 mm thick for cross runners and angle of size 25 x 25 x 1.50 mm thick along the walls suspended with and including 4 mm dia., Galvanized mild steel wire (as in suspenders of ceiling members fixed in proper position) including providing and fixing pre laminated interior grade one side laminated false ceilling with screws as per manufacturer's instructions and applying two coats of oil bound distemper over a coat of primer to obtain smooth finish incl dismantling complete all as specified and as directed. Make:Jindal / Hindalco / Indalco

In repair 12.5 mm thick gypsum ceilling board in hanger ceilling fixed with GI channel frame work ( as perimeter channel,intermediate channel,level chip,drywall top coat, joint paper tape,ceilling sec,connecting clip,rawl,plug, soffit,cleat,dry wall,screws and hannger sectionn ), including joint filling with jointing compounnd including finished the exposed soffits properly with oil based distemper or painting etc complete all as per for manufacturer instruction and directed

In repairs 18/19 mm thick Prelaminated particle board, interior grade, prelaminated one side with deocrative choice lamination & other side balancing white lamination, fixed with screws to stone/ timber frame work complete all as specified and as directed. Make : Ecoboard /Greenply Industries [Ply & Board Division] / Kitply / Anchor / Bhutan Board / Novapan / Associate Décor

Dismantling of Wall and Ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and as directed.

Dismantling of Plain or Corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and as directed.

Pre-painted galvalume aluminum zinc coating trapizoidal profile sheet of 0.50 mm thick[TCT] of any having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and as directed. MAKE : M/s TATA BLUE SCOPE, M/s LLOYD INSULATIONS INDIA LTD, M/s BUILD TECH/ JINDAL

S & F as in Ridge/flashings/Cladding to walls with similar sheet as per item No above but in plain, fixed with self tapping screws complete all as specified and as directed.

Taking down existing MS door / gate and refixing in same or other location including neseccary repair work such as welding of mild steel hinges/sliding bolts/angles as in door frame /MS sheet of garrage door shutters including necessary material required for welding work complete of area n exc 5 Sqm complete all as specified and as directed. Note: The quoted rate is excluding material used such as MS sheet/sliding bolt/Hinges/angle.

SREE VSM ENGINEERING

K SATYANARAYANA ENTERPRISES

ALLURI CONSTRUCTIONS

M/s VENKATA JAHNAVI CONSTRUCTIONS