PROVIDING AND FIXING TOWER AIR CONDITIONER AT LIBRARY SHQ BSG GNR SH EI FOR TOWER AC

Amount

Supplying & Laying of 35 sq mm armoured 3.5 core Aluminium LT conductornumber PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation and refilling the trench etc as required, but excluding sand cushioning and protective covering.

Supplying & fixing PVC Loop wire box of minimum size (HxWxD) 240x130x110 mm in the existing street/security light pole including 40 Amp Isolator-DHMYIFPX040 Four Pole, Connectors, Bakelite sheet and clamps with nut and bolts etc as req. Sintex/Hensal/hegar/Siemens/ABB

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required. A) 4 X 4 sq. mm + 2 X 4 sq. mm earth wire

Supplying and fixing 20 A, 415 V, TPN Industrial type socket outlet, with 4 pole and earth, metal enclosed plug top alongwith 20 A "C" curve, TPMCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required.

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. A) 3½ X 35 sq. mm (32mm)

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: A) 25 mm thick (for cupboard) including ISI marked nickel plated bright finished M.S. piano hinges with necessary screws

Providing and fixing to existing door frames: A)30 mm thick Fiberglass Reinforced Plastic (F.R.P.) flush doo shutter in different plain and wood finish made with fire retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate all around, with suitable wooden blocks inside at required places for fixing of fittings and polyurethane foam (PUF)/Polystyrene foam to be used as filler material throughout the hollow panel, casted monolithically with testing parameters of F.R.P. laminate conforming to table - 3 of IS: 14856, complete as per direction of Engineer-in-charge

M/S Taral Electricals