Loading
Loading…
Loading…
Tender Value
₹3.8 L
EMD Value
₹7,660
Closing Date
14 Sept 2026, 1:00 pm
Refer NIeT
Refer NIeT
Restoration of damaged distribution pipeline and instalation of valves and allied works for enhancing water pressure at tail ends at different mouzas under the Dighari Water Supply Scheme within Bongaon Block under NWSD I
2026_PHED_5021759_2
WBPHED/02e/AE/NWSSD-I/2026-27
Open Tender
CIVIL WORKS
Percentage
Refer NIeT
Please refer Tender documents.
5 documents required · 5 mandatory
₹7,660
2 Sept 2026
2 Sept 2026
16 Sept 2026
2 Sept 2026
14 Sept 2026
2 Sept 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Cast iron double flanged manually operated sluice valves generally conforming to IS 14846 : 2000, having four faces and spindle nut of gunmetal, inside screw non- rising type quality gunmetal /AISI 410 spindle: seat tested to 10kg/CM2 and body tested to 15kg/CM2, flanges flat faced and drilled to 1S. : 1538 : 1993. Painted black all over with asphalt base paint. Valves tested by closed end method.
NB Diameter in mm
80 mm dia. | 4 | Each | 3,857 | ₹15,428 |
| 2 | Supply and delivery of CIDF sluice valve (Special type) PW-1.00 of different dia make with CI double flanged non rusting spindle sluice valves conforming to IS 14846 -2000 with latest emended having body dome/bonnet and cover of C.I.Gr-F.G 210 mtr. spindle of IS-6603 G.R12/Gr-13 non-magnetic, nuts seatrings are of Gun metal as per IS:318LTB-2 flanges and drilled to IS:1538 Part IV &VI valves are suitable for max working pressure of 10 kg/cm2 (seat test) and body tested to 15kg/cm2.
N.B: The above item should be procured from the reputed manufactures as per deptt. approved vender list.
100 mm dia | 1 | Each | 6,138 | ₹6,138 |
| 2.1 | 150 mm dia | 1 | Each | 9,174 | ₹9,174 |
| 3 | Making flange joint to DI/CI pipes, specials and valves where necessary with supply of required rubber insertion and nut bolts, washers etc. of approved quality and type all complete as per specification and direction of EIC (Nut and bolts shall be of TATA/GKW rate).
80 mm dia | 8 | Each | 112 | ₹896 |
| 3.1 | 100 mm dia | 2 | Each | 182 | ₹364 |
| 3.2 | 150 mm dia | 2 | Each | 220 | ₹440 |
| 4 | Construction of different dia Sluice valve /Air valve /Washout chamber in different sizes for village road where light traffic run and for main road where heavy traffic run as deptt.approved drawing with 25cm thick brick work (1:6) over cement concrete (4:2:1) over a single B/F soling over150mm.thick sand filling in foundation including earth work in
excavation and disposal of excess earth from work site with RCC (1:1.5:3) cover slab 100mm / 150mm thick slab on top of chamber with 1% reinforcement in RCC cover slab with necessary opening for operation of valve all complete including cost of labour & materials as per Departmental Dwg. [Reinforcement type:- Other manufactuerers not specified]
80 mm to 150 mm dia pipe | 6 | Each | 12,649 | ₹75,894 |
| 5 | Supplying of UPVC Coupler 6Kg., class – III conforming to IS : 4985 – 2000 with latest revision and amendments ( This item is applicable for maintenance/ repairing work of pipe
line only).
75 mm OD | 7 | Each | 48 | ₹336 |
| 5.1 | 90 mm OD | 12 | Each | 67 | ₹804 |
| 5.2 | 110 mm OD | 6 | Each | 99 | ₹594 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 24.21 MB
2911.pdf
Tender Documents • 0.51 MB
BOQ_5100917.xls
BOQ • 0.38 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].