General

Earthwork excavation in Ordinary soil by Mechanical Means upto 3 m depth for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH (RBR-FNDN-1(B)) - 1 Cum - For Drain (kotha colony 8th-12th cross roads)

Filling of Stone Crusher Dust for foundation trenches including cost and conveyance off all materials and all labour charges ramming, watering etc, as per drawing and technical specification in Clause 305.3.9 MORD & 304 MORTH - For Drain

Providing concrete for plain/reinforced concrete (M20) in open foundations using 20 mm Graded hard stone aggregate, mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 MORD and 1500, 1700 & 2100 MORTH. - For Bed

Providing concrete for plain/reinforced concrete (M20) in open foundations using 20 mm Graded hard stone aggregate, mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 MORD and 1500, 1700 & 2100 MORTH. - For Walls

Providing High Yield Strength Deformed (HYSD) Fe 500 grade as per IS 1786-1979) of different diameters for RCC works, including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, complete for finished item of work in all floors. (APSS No.126) - For Culvert

VRCC M-20 Design mix (Cement: fineaggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry, complete but excluding cost of steel and its fabrication charges for finished item of work, but excluding centering, shuttering for culvert slabs - For Culvert

Filling of Stone Crusher Dust for foundation trenches including cost and conveyance off all materials and all labour charges ramming, watering etc, as per drawing and technical specification in Clause 305.3.9 MORD & 304 MORTH - For Shoulder

Construction of granular sub-base (GSB) by providing Well graded material for Grading III mixing in a Mechanical Mix Plant at OMC carriage mixed material to work site spreading in uniform layers with motor grader on prepared surface and compacting with 80-100 kN Vibratory Roller to achieve the desired density, complete as per Technical Specification of MORTH. - For Road

Laying of Plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43/53 grade at cement as per Clause 1501.2.2 M30 Grade at 400 kg per cum, coarse and fine aggregates conforming to IS:383, maximum in a concrete mixer of not less than 0.28 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork, spreading the concrete with shovels, rakes, compacted using needle and plate vibrators and finished in continuous operation, curing of concrete slabs for 14-days and water finishing to lines and grade as per drawing and Technical Specification Clause 1501 MORD. - For Road

Provision for Seignorage charges

Provision for NAC @ 0.10%

Provision for GST @ 18%

Provision for TPQA @ 0.739 %

Unforeseen item