Loading
Loading…
Loading…
| Sl No | Description | Qty | Unit | AFSAL A A L2 | C VIJESH L1 |
|---|---|---|---|---|---|
| 1.00Sheet work | |||||
| 1.00 | 2.6.1:Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge.All kinds of soil | 0.32 | cum | 50 ₹16.2 Lowest | 200.54 ₹64.97 |
| 1.00 | 50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 376.77 | kg | 170 ₹64,051.58 | 145.6 ₹54,858.29 Lowest |
| 1.00 | 4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | 0.31 | cum | 4,000 ₹1,248 Lowest | 7,189.28 ₹2,243.06 |
| 1.00 | OD319336/2025-2026:Providing and fixing Alu Zinc profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.40 mm (+0.05%), thickness . Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length up to 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete up to any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. (DAR code 12.50 modified) | 86.65 | sqm | 490 ₹42,458.5 | 449.1 ₹38,914.52 Lowest |
| 1.00 | 10.1:Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. | 56.7 | kilogram | 49 ₹2,778.3 Lowest | 90.82 ₹5,149.49 |
| 1.01 | OD322517/2025-2026:Providing and fixing 200mm half cut PVC pipe over flat iron brackets 20x5 mm size | 17 | metre | 268 ₹4,556 | 247.7 ₹4,210.9 Lowest |
| 1.01 | 13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work | 33.23 | sqm | 99 ₹3,289.67 Lowest | 128.33 ₹4,264.28 |
Tender Value
₹1.3 L
EMD Value
₹3,289
Closing Date
7 Oct 2025, 3:00 pmClosed
AEE, KANNUR BLOCK
AEE, KANNUR BLOCK PALLIKKUNNU P.O KANNUR 670004
Azhikode CHC sheet roofing work
2025_LSGD_803474_1
AE/LIDEW/KNR/TEN/2025/11
Open Tender
Civil Works - Buildings
Item Rate
180 days
AZHIKODE
Please refer Tender documents.
7 documents required · 7 mandatory
₹555
Yes
₹3,289
Yes
21 Oct 2025
29 Sept 2025
9 Oct 2025
29 Sept 2025
7 Oct 2025
29 Sept 2025
Amount
Sheet work
2.6.1:Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge.All kinds of soil
50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete
4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)
OD319336/2025-2026:Providing and fixing Alu Zinc profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.40 mm (+0.05%), thickness . Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length up to 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete up to any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. (DAR code 12.50 modified)
10.1:Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
OD322517/2025-2026:Providing and fixing 200mm half cut PVC pipe over flat iron brackets 20x5 mm size
13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work
AFSAL A A (BID ID -2377048)
Bidder Name
C VIJESH
AFSAL A A
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_1335729.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .