Janpad Bareilly ke antragart bhojipura nirikshan bhawan evem jiledari karaylaye ke punrodhhar ka karya

Amount

Dismantling brick work or stone work and cement concrete in cement mortar and including stacking of material with in a distance of 60 m. as per direction of Engineer-in-charge & also including all cost of material, labour & T&P etc. complete.

Dismantling reinforced cement concrete 1:2:4 including stacking of dismantled material with in 60m distance. & also including all cost of material, labour & T&P etc. complete.

Dismantling existing plaster including disposal of refuse with in distance of 60 meters. & also including all cost of material, labour & T&P etc. complete.

Dismantling C.C. or brick or granolithic floor including base concrete and including stacking of dismantled material with in 60 M distance. & also including all cost of material, labour & T&P etc. complete.

Centering and shuttering of C.C. work including rent of shuttering material, labour and T&P required for proper completion of work for slab, lintels, sun shades, columns & walls etc.

Reinforcement including cutting, bending & binding in position as directed by Engineer in charge & also including all cost of material, labour & T&P etc.

Laying R.C.C. 1:1.5:3(M-20) Mix cement, coarse sand & 20 mm down graded stone grit including cost of all material, labour and T&P etc. complete but excludiing cost of shuttering.

Laying Brick work C.M. 1:4 Mix cement & coarse sand as directed by Engineer in charge & also including all cost of material, labour & T&P etc.

12 mm thick Cement Plaster in 1:3 cement mortar as directed by Engineer in charge & also including all cost of material, labour & T&P etc.

12 mm thick Cement Plaster in 1:5 cement mortar as directed by Engineer in charge & also including all cost of material, labour & T&P etc.

Applying one coat of cement primer of approved brand and manufacture on wall & ceiling surface & T&P etc. complete.

Proving and applying plaster of paris putty 2 mm thickness over plastered surface to propare the surface even and smooth & also including all cost of material, labour & T&P etc. complete.

Finishing walls with water proof cement paint of approved make and quallty on new work with two coats to give as even shade, including supply of all cost of material, labour & T&P etc. required for proper completion of the work.

Distemper two coat with oil bound distemper of approved brand manufacture and required shade on decoreted wall surface to give on even shade over and including a priming coat with cement primer of approved brand and manufacture such as of british, shalimar, asian paints after thoroughly brushing saface free from mortar dropping and other other foreing matter and also including preparing the surface even also shad prepared smooth & including all cost of material, labour & T&P etc. complete.

Laying C.C. 1:1.5:3 Mix cement, coarse sand & 20 mm down graded stone grit including cost of all material, labour and T&P etc. complete but excludiing cost of shuttering.

Providing and laying vitrified floor tiles in 60x60 cm size (thickness to be specified by the manufacturer) with water absorption's less then 0.080% and conforming to IS: 15622 of approved make in all colours and shades laid on 20 mm thick cement morter 1:4 including grouting the joints with white cement and matching pigments etc. including all cost of material, labour & T&P etc. complete.

Proving and fixing fly proof galvanised M.S. wire gauge to windows and clerestory windows using galvanised M.S. wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm with 2nd class teak wood beading 62x19 mm & also including all cost of material, labour & T&P etc. complete.

Providing and laying "Brick coba" 12 mm thick laid with M-150 class brick bat coba 7.50 cm thick with gap of 15 mm to each other over 20 mm thick base of cement mortar 1:4 cement and coase sand mixed with water proofing compoundfilled gaps of coba & tap of coba mortar mixed with water proofing compound in 1:4 cement and coarse sand mortar finished smooth & top mashed false square 30 cm x 30 cm and side wall paraper shall be mono tythic plaster wall upto 30 cm higher and junction and corner shall be rounded by brick ballast cement and coarse sand masonary coba with top finished plaster mixed with acetic water proofing compound @ 2% by weight & including s/o all material, labour T&P etc. complete for proper comletion of work including all cost of material, labour & T&P etc. complete.

Providing and injecting chemical emulsion for preconstructional antitermite treatment and creating barrier under and around thecolumn pits ,wall trench basement exavation top surface of plinth filling junction of wall and floor along the external per meter of building expension joints surrounding of pipes and conduit etc. Complete (plinth area of the building at ground floor only shall be measured as per I:S 6313( part ii 1981). Aldrine emulsificable concentrate of any other approved material such as Hepthachlor or chlordance will be used . The rate of application of chemical emulsion shall be as follows.(As per pwd s.o.r chap. no. 8 item no. 1)

Brick on edge soling including preparation of sub-grade to prescribed camber including supplying brick , filling joints with lacal earth spreading , a binding coat 1 cm of local sand or earth over the entire suface per square meter.

Providing & fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast iron P or S trap, 10 ltr low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixture complete, including cutting and making good the walls and floors wherever required;white vitreous china orissa pattern W.C. pan of size 580x440 mm with integral type foot rests.

Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass piller taps. 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets , cutting and making good the walls wherever require: White Vitreous China wash basin size 630x450 mm with a pair of 15mm C.P. brass pillar tap

Mild steel or iron work in heavy sizes such as trusses, built up gates , door, frames, record racks roof work ,gates etc. wrought to required form including drilling holes , revetting or welding where necessary , and also including supply of steel , boltes , nuts etc. & its fixing required for proper completion of the work.

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface/recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. (i) Group A

Same as above (ii) Group B

Same as above (iii) Group C

Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.

Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit along with 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.

Providing and fixing chlorinated Polyvinyl chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.0m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.(DSR 2021 item no 18.7) internal work exposed on wall (i) 25mm nominal bore

Wiring for circuit/ sub main wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. (i)2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

Same as above (ii) 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

Same as above (iii) 2 X 6 sq. mm + 1 X 6 sq. mm earth wire

Same as above (iv) 4 X 10 sq. mm +2 X6 Sq. mm earth

Same as above (v) 4 X 16 sq. mm +2 X6 Sq. mm earth

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 20 mm (i) 25 mm

Same as above (ii) 40 mm

Same as above (iii) 50 mm

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. (i) 5/6 A switch

Same as Above (ii) 2 way 5/6 A switch

Same as Above (iii) 15/16 A switch

Same as Above (iv) 3 pin 5/6 A socket outlet

Same as Above (v) 6 pin 15/16 A socket outlet

Same as Above (vi )Bell push

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.

Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc. as required. (i) 1 or 2 Module (75mmX75mm)

Same as Above (ii) 3 Module (100mmX75mm)

Same as Above (iii) 4 Module (125mmX75mm)

Same as Above (iv) 8 Module (125mmX125mm)

Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required. (i) 1 or 2 Module

Same as Above (ii) 3 Module

Same as Above (iii) 4 Module

Same as Above (iv) 4 Module

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.

Installation ,Testing, Commissioning of wall bracket /ceiling fittings of all sizes and shapes containing up to two GLS/CFL/LED lamps per fitting, complete with all accessories including connections etc. as required.

Supplying and fixing call bell/ buzzer suitable for single phase, 230 V, complete as required.

Providing and fixing plain 16/0.20mm (0.50sqmm) twin flat flexible, FRLS PVC insulated, copper conductor cable, in PVC sleeve of suitable size on the floor/ wall, or side of the table/ door etc. as required.

Installation ,Testing, Commissioning of pre-wired,flourescent, compact flourescent, LED fittings of all types complete with accessories and tube/lamp etc, directly on ceiling/wall, including connections with 1.5 sqmm FRLS PVC Insulated, copper conductor single core cable and earthing the same etc.as required.

Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (up to 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable, including providing and fixing phenolic laminated sheet cover on the fan box etc. as required.

Installation, testing and commissioning of exhaust fan,in the existing opening, including making good the damage, connections etc as required. Upto 450 mm

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 2 nos. 3 pin 5/6 A modular socket outlet and 2 nos.5/6 A modular switch, connections etc. as required.(for light plugs)

Providing and fixing following rating and breaking capacity and pole MCCB with THERMOMAGNETIC RELASE AND TERMINAL spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required. (i) 125 A,36KA,FPMCCB

Same as above (ii) 100A/63 A,36KA,FPMCCB

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required but without MCB/RCCB/Isolator) (i) 4 way (4 + 12), Double door

Same as Above (ii) 8 way (4 + 24), Double door

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. (i) Single pole

Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.

Supplying and fixing Cable End Box (Loose Wire Box) suitable for following triple pole and neutral, sheet steel, MCB distribution board, 415 Volts, on surface/ recess, complete with testing and commissioning etc.as required. (i) For 4 way, Double door TPN MCBDB

Same as above (ii) For 8 way, Double door TPN MCBDB

Supplying and fixing Cable End Box (Loose Wire Box) suitable for triple pole and neutral, sheet steel, Vertical MCB distribution board, 415 Volts, on surface/ recess, complete with testing and commissioning etc. as required.

Making of Earthing with COPPER EARTH PLATE of size 600mmx600mmx3mm thick i/c accessories and providing masonary enclosure with heavy duty Cover plate having Locking arrangement and watering pipe of 2.7 meters etc. with SALT & CHARCOAL as required.

Making of Earthing with G.I.(HOT DIP GALVANISED) EARTH PLATE of size 600mmx600mmx6mm thick i/c accessories and providing masonary enclosure with heavy duty Cover plate having Locking arrangement and watering pipe of 2.7 meters etc. with SALT & CHARCOAL as required.

Providing and fixing 25mm x 5 mm Copper in 40 mm dia G.I.Pipe from earth electrode including connections with brass nut,bolts, washers etc including excavation, refilling etc.as required.

Providing and fixing 25mm x 5 mm GI strip in 40 mm dia GI Pipe from earth electrode including connections with G.I. nut,bolts, washers including excavation, refilling etc as required.

providing and fixing 25x5 MM copper strip on surface or in recess for connections

Providing and fixing 25x5MM GI strip on surface or in recess for connections.

Providing and fixing 6 SWG.G.I.Wire on surface or in recess for loop earth along with existing surface /recess conduit/ submain wiring/ cables etc.as required.

PL ENTERPRISES