New construction of PHC Main Building, PM Room, Compound Wall,C.C.Road and Electrical Work at Amrapar, Ta:-Bhachau, Dist:-Kutch.

Name of Work : New construction of PHC Main Building, PM Room, Compound

Wall,C.C.Road and Electrical Work at Amrapar, Ta:-Bhachau, Dist:-Kutch.

Quantities Rates Total Amount

Quantities Rates Total Amount

estimated In Figure

It According to

NBO NO. but may be Description Unit

No. In Words estimated

less Rs. Ps. quantities Rs. Ps.

Excavation for foundation upto 1.5 mt. depth

No.1, including sorting out and stacking of unuseful Rupees One Hundred Twenty Two and

materials and disposing off the excavated stuff upto Ninety Three Paise

1 50 Meter lead. (A) Loose or soft soil

No.1, Rupees One Hundred Fifty Seven and Thirty

264.00 (B) Dense or hard soil 157.33 Cmt

Excavation for foundation for depth from 1.5 m to

Ch.4, Sr. m including sorting out and stacking of useful

No.2, Rupees Three Hundred One and Eighty Four

216.58 materials and disposing off the excavated stuff upto 301.85 Cmt

P.No.29 50 Meter lead.

(D) Soft rock not requiring Blasting

Filling available excavated earth(excluding rock) in

No.6, trenches, plinth, sides of foundations etc, in layers Rupees One Hundred Thirty Six and Ninety

not exceeding 20 cm. in depth consolidating each One Paise

deposited layer by ramming and watering.

Ch.4, Sr. Filling in plinth with sand under floors including

No.7, Rupees Four Hundred Eighty One and Eighty

146.57 watering, ramming, consolidating and dressing etc. 481.80 Cmt

P.No.31 complete

Ch.4, Sr. Filling in foundation and plinth with murrum or

No.8, Rupees Two Hundred Sixty Nine and Seventy

290.30 selected soil in layers of 20 cm. thickness including 269.75 Cmt

P.No.32 watering, ramming and consolidating etc. complete.

Providing and laying cement concrete 1:2:4 (1

No.10, Cement : 2 coarse sand :4 graded stone aggregate Rupees Three Thousand Seven Hundred

20m.m. nominal size) and curring complete excluding Forty and Twenty Two Paise

cost of form work in : (a) foundation and plinth

Ch.5, Sr. Providing and laying TMT bar Fe 500 reinforcement

No.20, Rupees Seventy Seven and Twenty Eight

48223.14 for R.C.C. work including bending, binding and placing 77.29 Kg

P.No.39 in position complete for all floors.

No.25, Providing throating or plaster drip and moulding to

133.10 43.05 Rupees Forty Three and Four Paise Rmt

Providing and Laying controlled cement concrete M

250 and curing including cost of form work but

excluding the cost of reinforcement for reinforced Rupees Four Thousand Six Hundred Three

concrete work in. As per specification. (A). For and Fifty Eight Paise

Foundations ,footing bases of columns and the like

and Mass concrete.

Rupees Seven Thousand Twenty Seven and

42.11 (B). For Columns 7027.58 Cmt

Fifty Eight Paise

Rupees Six Thousand Four Hundred and

96.77 (C) For Plinth Beam , Tie Beams at Ground Levels 6400.37 Cmt

Thirty Seven Paise

Providing and laying controlled cement concrete M-

200 with curing etc. complete including the cost of

Rupees Seven Thousand Three Hundred

48.11 form work but excluding the cost of reinforcement 7313.41 Cmt

Thirteen and Forty One Paise

for R.C.C. work at Ground Floor as per specification.

Rupees Six Thousand Eight Hundred

53.10 (b) Beams up to floor two levels 6819.52 Cmt

Nineteen and Fifty Two Paise

10 Addi. Spec. Rupees Seven Thousand Seven Hundred

14.41 (c) Lintels up to floor two level 7733.57 Cmt

Thirty Three and Fifty Seven Paise

Rupees Seven Thousand Forty Five and

3.27 (d) Chajjas 7045.76 Cmt

Seventy Six Paise

Rupees Seven Thousand Seven Hundred

70.77 (e) Slabs 7743.67 Cmt

Forty Three and Sixty Seven Paise

Rupees Five Thousand Nine Hundred Forty

23.40 (f) Copings,Sills 5946.88 Cmt

Six and Eighty Eight Paise

Brick work using common burnt clay conventional

No.2, building bricks having crushing strength not less than Rupees Four Thousand Two Hundred

35 kg/Sq. Cm. in foundation and plinth in cement Fourteen and Thirty Two Paise

mortar 1:6(I cement : 6 fine sand)

Brick work using common Brunt clay building bricks

No.2+6, having crushing strength not less than 35 Kg./Sqcm.

Rupees Four Thousand Four Hundred Ninety

12 I.No.6.13+6.1 273.86 In super structure above plinth level up to floor two 4496.05 Cmt

9, Six and Four Paise

level in cement mortar 1:6 (1cement : 6 fine sand)

(B) Conventional G.F

Half brick masnory in common burnt clay

No.12+18, conventional building bricks having crushing strength

Rupees Six Hundred Eighty Four and Twenty

13 I.No.6.3(i)(B) 97.58 not less than 35 Kg/Sq.Cm in cement mortar 1:4 (1 684.26 Smt

+6.32(B), Six Paise

cement:4 coarse sand) above plinth level upto floor

Providing and fixing in position standared Alluminium

door with powder coating section frame of

alluminium standared section for outer frame size

50mm x 25 mm and door styles and top rails of

alluminium section size 50 mm x 25 mm fully powder

coated and providing rubber gasket and glazing clips, Rupees Four Thousand Thirty Four and

14 Addi. Spec. 25.80 4034.95 Smt

around the Acrylic sheet all over including providing Ninety Five Paise

heavy handle, stoppers, 5mm to 10mm thick. Acrylic

Sheet Scratches proof fixed with transparent silicon

gasket, including all required materials, labours and

equipment as per detailed drawing as directed by

engineer in-charge.

Providing & fixing in position standard extruded

Aluminum Three track with Three sliding shutters in

which Two Shutters with 5mm thick Frosted Glass

and one shutter with Stainless Steel Mosquito net In

Opening Possition always one of Mosquito net

shuuter should be in Close Possition all window

section with colour anodized in which Bottom Frame

Section 92.00 x 29.5 X 1.20 mm (having wt per Rmt

1.005 Kg) Frame section having three track top and

side of section size 92.00 x 29.50 x 1.20 mm size

(having wt per Rmt 0.907 Kg) with top section for all Rupees Four Thousand Seven Hundred Sixty

15 Addi. Spec. 52.25 4762.15 Smt

Three shutters Top and Bottom rail 20.00 x 50.00 x x Two and Fifteen Paise

1.50 mm ( having weight per Rmt = 0.642 Kg) handle

section of size 20.00 x 50.00 x x 1.50( having weight

per Rmt = 0.571 Kg ) and interlock rail 20.00 x 50.00 x

x 1.50 mm ( having weight per Rmt = 0.697 Kg ) of

approved shade & sliding shutters and providing

rubber gasket and Glsing Clips if necessary around

the glass allover including providing heavy handle,

heavy lock, bracket, stoppers. Approved Quality as

directed By Enginner Incharge including all required

materials labours and equipments as per detailed

Providing & fixing in position standard extruded

Aluminum Ventilator with louvers with anodized

section for outer frame size 48 x 24 x 1.35 mm of

approved shade louvers from alluminum standard

Rupees Three Thousand Two Hundred Fifty

16 Addi. Spec. 7.38 section and providing rubber gasket around the 3252.20 Smt

Two and Twenty Paise

glass allover including providing Glass 4 mm thick

(Frosted or obscured on one side) fixed in chanels

including all required materials labours and

equipments as per detailed drwg. as directed.

Providing and fixing MS grills of required pattern as

per approved design and direction to window frames

No.10025A, with MS Flat/squrare or round bars at required

1599.36 109.08 Rupees One Hundred Nine and Eight Paise Kg

spacing and frame all around fixed with round headed

bolts & nuts or by screws to window frame (Plain

Steel work welded in built up section,framed work

including cutting,hoisting,fixing in position and

Ch-11, Sr. applying a priming coat of red lead paint(A) In beams

No. 11002A Rupees Nine Thousand One Hundred Eight

15.89 and joints channels angles tees,flat with connecting 9108.48 Qtl

and Forty Eight Paise

P.no103 cleats as in main and cross beam, hip and jack

rafters,purlin connected to common rafter and the

Ch-23, Providing and laying in trenches galvanised mild steel

Sr.No.23002 Rupees Nine Hundred Twenty One and Sixty

65.00 tubes ( Medium grade ) of the following nomonal 921.68 Rmt

P.no 199 bore tubes including all necessary fitting.(F) 80mm

Providing & fixing in position standard extruded

alluminium partition with colour anodized of

micron hollow section frame of approved shade &

pivoted single shutter fabricated from alluminium

standard section for outer frame size 101 mm x

mm (of app. wt. 1.2 Kg/Rmt.) and door styles and top

rail of alluminium section size 47.5 mm x 44.5 mm (of

app. wt. 1.05 Kg/Rmt.) bottom rail & lock rail for door

Rupees Five Thousand Three Hundred Forty

20 Addi. Spec. 8.40 size 114 mm x 44.5 mm (of app. wt. 1.30 Kg/Rmt.) 5342.90 Smt

Two and Ninety Paise

and providing rubber gasket and glazing chips around

the glass allover including providing heavy handle,

heavy lock, door closer, bracket, stopeers. 5mm thick

transparent float glass of copper / grey tint (structural

glass) fixed with transparent silicon gasket and 6mm

thick compact sheet in bottom panel including all

required materials , labours and equipments as per

detailed drawings and as directed.

Provoding and fixing flush door shutters, solid core

construction with frame of first class hardwood with

cross board and face veneer or plywood face panels,

Rupees Three Thousand Six Hundred Twenty

21 Addi. Spec. 55.04 including anodised alluminium butt hinges with 3623.88 Smt

Three and Eighty Eight Paise

necessary screws. (B) Non-decorative type and block

board core anodised alluminium butt hinges in flush

door shutters (1) 32 to 35MM Shutters

Providing and fixing in position standared Alluminium

cup board shutter with powder coated frame of

alluminium standared section for outer frame size

50mm x 25 mm and door styles and top rails of

alluminium section size 50 mm x 25 mm fully powder

coated and providing rubber gasket and glazing clips, Rupees Three Thousand Nine Hundred Fifty

22 Addi. Spec. 27.86 3959.20 Smt

around the Acrylic sheet all over including providing Nine and Twenty Paise

heavy handle, stoppers, 5mm thick. Acrylic Sheet

Scratches proof fixed with transparent silicon gasket,

including all required materials, labours and

equipment as per detailed drawing as directed by

engineer in-charge.As per specification.

Providing and fixing in position collapsible steel

shutters with vertical channesl 20 x 10 x 2 mm braced

Ch.11, Sr. with flat iron diagonals 20 x 5 mm size with top &

No.11003, Rupees Six Thousand Seventy One and Fifty

11.00 bottom rails of T iron 40 x 40 x 6 mm with 38 mm dia 6071.50 Smt

P.No.103 steel pulleys complete with bolts, nuts, locking

arrangements, stoppers, handels including applying a

priming coat with red lead paint etc. complete

Providing and fixing bright finish brass hydraulic door

closer of approved model and make with necessary Rupees One Thousand Nine Hundred Fifty

24 Addi. Spec. 23.00 1956.37 Each

accessories and screw etc. complete as per direciton Six and Thirty Seven Paise

of enginer in charge.

Providing. & laying 50mm thick cement concrete

No.14015B, flooring 1:2:4 (1 cement : 2 coarse sand: 4 graded Rupees Three Hundred Thirty Nine and

stone aggregate 20 mm nominal size) laid in one layer Seven Paise

finished with a floating coat of neat cement.

Providing & laying Ceramic tiles thick in flooring

No.14008B, treads of steps and landings laid on a bed of 12 mm Rupees One Thousand Seventeen and Thirty

thick cement motar 1:3 (1 Cement : 3 coarse sand) Paise

finished with flush pointing in white cement

Ch.14, Sr. Providing and laying Ceramic tiles in skirting risers of

steps and dado on 10mm thick cement plaster in CM Rupees One Thousand Ninety and Thirty

14.32(B), 1:3 pointing in white cement and white cement One Paise

P.No.122 slurry.

Providing and laying water proofing treatment on

terrace including applying neat cement slurry

2.75kg/cm2 on cement admixed with water proofing

component after cleaning the surface /laying cement

concrete with brick bat 75 mm to 100 mm thick with

50%of C.M. 1:5 to required slope including ramming

at junction of wall and slab after two days of proper

curing applying broken china mosaic flooring for plain

Rupees One Thousand One Hundred

28 Addi. Spec. 566.13 and curve surface 12mm to 20mm white colour 1119.08 Smt

Nineteen and Eight Paise

broken piece of glazed tiles to be laid over 12mm

thick cement mortar bedding of CM (1:3) to plain and

slop and to be tampered to bring mortar cream up to

surface with using white cement and incl. Rounding

of junctions and extending them up to 15 cm along

the wall and curing with bends any patterns or design

as per drawing and direction incl. cleaning with water

and oxalic acid.(10 years Guarrenty

Providing and fixing 25mm thick both the sides polish

kota stone shelves below plaftform, in store or in

Rupees Nine Hundred Thirty Seven and

29 Addi. Spec. 27.89 cupboards including fixing in position front edge 937.28 Smt

Twenty Eight Paise

machine cut polishing etc. complete As per

Providing 15 mm. Thick cement plaster in single coat

Ch.17, Sr. on fair side Brick/concrete walls for interior plastering

No.17002B, Rupees One Hundred Sixty One and

2800.61 up to G.F. and finished even in smooth (ii) Cement 161.20 Smt

P.No.135 mortar 1:4 ( 1 cement : 4 sand)

Providing 10 mm thick cement plaster in single coat

No.17001B, on fair side bricks/concret walls for interior plastering Rupees One Hundred Twenty Two and

up to floor two level (G.F.) finished even and smooth Twenty Six Paise

in cement mortar 1:4 (1 cement : 4 sand)

20 mm. Thick sand faced cement plaster on walls up

Ch.17, Sr. to height 10 meters above ground level consisting of

No.17009, Rupees Three Hundred Fifteen and Sixty

911.10 12 mm. Thick backing coat of c.m. 1:3 (1 cement : 3 315.69 Smt

P.No.136 sand) and 8 mm. Thick finishing coat of c.m. 1:1 (1

cement : 1 sand) etc. complete.G.F.

Distempering ( Three coats) with dry distemper of

approved brand & manufacturer & of required shade

on ceiling surfaces to give an even shade, over &

024, I.No. including lapi & primary coat with alkali resistance Rupees One Hundred Seven and Ninety One

primer of approved brand aftere throughly brushing Paise

the surface free from mortar fropping & other foreign

matter & also including perparing the surface even &

smooth. for celling on 10 mm plaster

Wall painting (two coats) with plastic emulsion paint

of approved brand and manufacture on wall surface

No.18031, to give an even brushing the surface free from mortar

944.85 84.37 Rupees Eighty Four and Thirty Six Paise Smt

droppings and other foreign matter and sand

prepared smooth.

Finishing wall with weather proof exterior emulsion

Ch.19, Sr. paint on wall surface (two coats) to give an required

Rupees One Hundred Twenty and Twenty

35 No.19031, 2038.50 shape even shade after thoroughly brushing the 120.26 Smt

I.No 892 Six Paise

surface to remove all dirt, and remains of loose

powdered materials.etc complete

Painting two coats (including priming coat) on new

19001+1900 steel and other metal surfaces with sythetic enamel

Rupees One Hundred Twenty Eight and Sixty

36 2, I.No.19.2 + 104.08 paint, brushing interior to give an even shade 128.62 Smt

19.7, Two Paise

including cleaning the surface of all dirt,dust & other

foreign matter.

Carrying out plinth treatment to post construction /

exitsting structure by spraying chemical solution for

termite control treatment incl. labour and materials

consistent with I.S.I. specification using chlordene

Ch.22, Sr.No. and chiorpurfiles 20 EC as per 6131 paret II

22007, Rupees One Hundred Twenty Four and

536.31 consentration weight one percent is recommended. 124.35 Smt

Thirty Five Paise

P.No.187 i.e. one litre 20 EC chemical emulsion with 19 litre

give 1 % concretration inclusive of one litre chemical

emulsion application at the rate of 5 litre

chemical/sq. mt. of surface is recommended as per

Providing, laying and jointing in true line and level

U.P.V.C. Pipe (SCH-40) line including fittings make

Prince/Supreme/Astral/Finolex or equivalent as

Ch.23, Sr.No. approved by Engineer in charge. Pipe shall be fixed on

40.00 the wall with the help of clamp at every two meter 72.65 Rupees Seventy Two and Sixty Four Paise Rmt

P.No.206 C/C or shall be concealed as directed including

necessary fittings etc. including testing of pipe and

joints and fixing the same with adhesive solvent,

including cost of all materials.(A) 15mm

120.00 (B) 25mm 91.84 Rupees Ninety One and Eighty Three Paise Rmt

23063, Rupees One Hundred Nineteen and

23064, Rupees One Hundred Forty Eight and Eleven

Providing and fixing in position PVC cowl went of 100 Rupees One Hundred Fifty One and Fifty

mm dia.As per specification. Paise

Providing and fixing PVC SWR Nahni trap IS 14735 for

Ch.23, Sr.No. drain - 75 mm diameter with jali of the following

Rupees Five Hundred Eighty Six and Twenty

40 23068, I.No., 18.00 nominal diameter of self cleansing design with C.I 586.27 Each

P.No.208 Seven Paise

scread down or hinged grating including the cost of

cutting and making good the walls.

Providing and fixing white or coloured glazed china

vitreious china orrisa pattern water closet of size

Ch.no-23 x 440 mm including providing and fixing vitreous

Rupees One Thousand Three Hundred

41 Sr.No.23111 7.00 china 100 mm size 'P' or 'S' trap including jointing the 1319.53 Each

+ 23113 Nineteen and Fifty Three Paise

trap with pan and soil pipe in CM (1:1) (1 cement :1

fine sand) and pair of foor rest etc complete.As per

Providing & fixing wash down water closet (Europian

I No. type W.C. pan) with integral 'P' or 'S' trap including

23.112.S.R Rupees One Thousand Six Hundred Forty

6.00 jointing the trap with soil pipe in cement mortar 1:1 1648.15 Each

Eight and Fourteen Paise

213+23.121 (1 cement : 1 fine sand) with plastic seat and cover.

(A) Vitreous china pattern

Providing and fixing flat back wash basin 550 mm x

400 mm size of first grade, white in colour with

single hole for pillar trap with CI or MS brackets

35-A+23.136- painted with including cutting holes and making good

A+23.95A- the same including providng and fixing CP brass waste

coupline 32mm dia including providng and fixing MI Rupees Two Thousand Two Hundred Forty

020A+23021 washer uinon 32 mm dia, including providng and Two and Ninety Eight Paise

A+23029A+2 fixing 15mm dia pillar tap capsten head screw down

3030A high pressure with screws, shanks and back

4 nuts,including providing and fixing waste pipe 15mm

x 600 mm pvc inlet connection 15mm brass screw

down stop tap with necessary fititngs etc. complete

Ch.23, Sr.No. Providing and fixing ( 600 X 450 X 150 mm) size

23019+2302 vitreous china laboratory sink with CI or MS brackets

0A+23021A, Rupees Two Thousand Five Hundred Five

5.00 painted white including cutting holes in wall and 2505.13 Each

and Thirteen Paise

3.135+23.13 making good the same 40 mm dia CP waste couplin

6, P.No.203 rails etc. complete.As per specification.

Providing and fixing 600 x 450 mm bevelled edge

23024, mirror of superior glass mounted on 6 mm thick A.C. Rupees Eight Hundred Fifty Nine and Forty

sheet or ply wood sheet and fixed to wooden plug Paise

with C.P. brass screw and washer

Ch.23, Sr.No. Providing and fixing C.P. brass towel rail comoplete

23025, Rupees Six Hundred Sixteen and Forty Two

13.00 with C.P. brass bracket fixed to wooden plug with C.P. 616.42 Each

P.No.203 brass screws (B) 600 x 20 mm size

Ch.23, Sr.No. Providing and fixing screw down bib taps brass

23028(A-1), Rupees One Hundred Eighty Six and Eighty

22.00 chromimum plated screw down bib tap 186.83 Each

P.No.203 (I) 15 mm dia

23031(E), Providing and fixing gun metal check or non return Rupees One Hundred Eighty Six and Eighty

full way wheel valve. 40mm dia Two Paise

Ch.23, Sr.No. Providing. and fixing chromium plated brass half turn

23032(B), Rupees Two Hundred Sixty Three and

7.00 flush cock 25mm dia including fixing in pipe line 263.77 Each

Seventy Seven Paise

P.No.204 etc.comp.

23037(A-2), Providing. & fixing 50 mm dia ball cock of copper Rupees One Hundred Eighty Nine and Eighty

metal and approved quality as directed. Three Paise

Providing and fixing brass cromium plated surgical

Rupees Seven Hundred Eighty Five and

51 Addi. Spec. 5.00 handle cock of approved size 15mm dia As per 785.78 Each

Seventy Eight Paise

Supplying & fixing PVC water tank of Sintex including

delivery at site, supply and fixing of lintel, outlet, air

vent overlow, drainaige sleves of the specified size,

with necessary neoprene gasket/packing/wshers, GI

washer & check nuts etc. all complete as directed on

52 Addi. Spec. 3500.00 13.13 Rupees Thirteen and Thirteen Paise Litre

terrace, lofts in bathroom etc. at any height. The rate

shall include for fixing of any additional accessories

supplied by the supplier. The necessary pedestal/

supporting structrures shall be measured under the

relavant items etc complete.As per specification.

Providing and fixing S.W. Gully trap with C.I. Grating

brick masonry chamber with precast r.c.c. cover with

frame of 300 mm. X 300 size (inside) heavy duty.As Rupees One Thousand Four Hundred One

53 Addi. Spec. 10.00 1401.88 Each

per specification. and Eighty Eight Paise

(I) Square mouth traps

(B) 150 mm. X 100 mm size P or R type

Applying two coats of Birla or Asian acrylic lapy (

putty) & two coats of primer of approved brand and

manufacture on new wall surface to give an even

54 19032, I.No., 1486.38 40.59 Rupees Forty and Fifty Nine Paise Smt

P.No.148 shade including thoroughly brushing the surface free

from mortar dropping and other foreign matter and

sand papered smooth.

Constructing brick masonary chamber for

underground C.I. inspection chamber & bends with

bricks having crushing strength not less than

kg/cm2 in C.M. 1:5 with precast r.c.c. cover with

frame heavy duty 445 mm x 610 mm internal

dimensions : total weight of cover with frame to be

not less than 38 kgs. (Wt. of cover 23 Kgs. and Wt. of Rupees Three Thousand One Hundred

55 Addi. Spec. 15.00 3128.98 Each

frame 15 Kts. (R.C.C. top slab with 1:2:4 mix (1 Twenty Eight and Ninety Eight Paise

cement : 2 coarse sand : 4 graded stone aggregate

mm size) foundation concrete 1:5:10 inside plaster

mm thick with cement mortar 1:3 finished smooth

with a floating coat of neat cement on walls and bed

concrete etc. comp. (A) Inside dimensions, 455mm. x

610mm. and 450 mm. deep for single pipe line.

Providing and laying to wall ceiling and floor 6.0 kg.

f/cm2 working pressure polythelen pipes of the

following dia. low density, complete with special Rupees Seven Hundred Fifty Seven and Fifty

56 Addi. Spec. 40.00 757.50 Rmt

flange compression type fittings, wall clamps etc. Paise

including making good the wall ceiling and floor as

per specification. 150mm Dia.

Providing and laying marble stone slab flooring over

Ch.14, Sr.No. 20mm (average) base of cement mortar 1:6 (1

14011, Rupees Two Thousand One Hundred Ninety

179.33 Cement : 6 coarse sand) or L.M.1:1.5 and jointed with 2194.76 Smt

Four and Seventy Six Paise

P.No.122 grey cement slurry including rubbing and polishing

complete.(B) Marble slab 25mm. Thick.

Site clearance including clearing and grubbing of land,

Ch.26, Sr.No. uprooting wild vegitation,grass,bushes, sappling of

4000.00 trees of growth upto 3 mt.and disposing the 8.42 Rupees Eight and Forty Two Paise Smt

P.No.333 excavated material up to 100 lead or as directed by

Engineer Incharge.As per specification.

Providing and laying Vitrified tiles , 24'' x 24'' in

14008C, flooring treads of steps and landing laid on a bed of Rupees One Thousand One Hundred Twenty

12mm thick cement mortar 1:3 (1-cement : 3-coarse and Thirty Six Paise

sand ) finishing with flush pointing in white cement.

Providing and fixing concealed center point to wall

ceiling & floor CPVC (SDR 13.5) PIPE having National

Sr.No.23055 Sanitation Foundation (NSF) seal for potable water of Rupees One Hundred Seventy and Thirty

following dia. nominal bore tube fittings and clamps Five Paise

including making good the wall, ceiling and floor etc.

complete.[A] 15 mm.

Providing and fixing concealed center point to wall

ceiling & floor CPVC (SDR 13.5) PIPE having National

Sr.No.23057 Sanitation Foundation (NSF) seal for potable water of Rupees Two Hundred Fifty Three and Eighty

folllowing dia. nominal bore tube fitting and clamps Two Paise

including making good the wall, ceiling and floor etc.

complete. (C) 25 mm.

Providing and fixing to wall ceiling and floor 10.0 Kg.

F/Cm2 working pressure polythene pipes of the

Sr.No.23004 following outside Dia. Low densidy, complete with Rupees Two Hundred Eighty and Twenty

special falnge compression type fittings, wall clipsetc. Three Paise

62 including making good the wall ceiling and floor.(F)

Sr.No.23004 Rupees Three Hundred Thirty Nine and Four

Providing and laying cement concrete 1:3:6 (1

Ch.05, Cement : 3 coarse sand : 6 hand broken stone

Sr.No.3 , Rupees Three Thousand Twenty Five and

142.78 aggregates 40m.m. nominal size) and curring 3025.99 Cmt

Ninety Nine Paise

P.No.37 complete excluding cost of form work in : (a)

foundation and plinth

Ch.06, Brick work using common burnt clay conventional

Sr.No.2+6+7 building bricks for super structure having crushing

strength not less than 35 Kg./Sq.Cm. in cement Rupees Four Thousand Five Hundred Thirty

.19B+6.2B , mortar 1:6 (1 cement : 6 fine sand) in super structure Eight and Forty Seven Paise

P.No.64,65,6 above plinth level upto floor two level (conventional )

Providing and laying controlled cement concrete M-

200 and curing complete including the cost of form Rupees Seven Thousand Seven Hundred

65 Addi. Spec. 6.68 7785.08 Cmt

work but excluding the cost of reinforcement for Eighty Five and Eight Paise

reinforced concrete work in: (C) Slabs for First floor

Providing and laying controlled cement concrete M-

200 and curing complete excluding the cost of form

work and reinforcement for reinforced concrete work Rupees Six Thousand Eight Hundred Sixty

66 Addi. Spec. 5.27 6860.93 Cmt

in :(c) Slabs, Landings, Shelves, Balconies, Lintels, and Ninety Three Paise

Beams, girders and cantilever up to floor For Beams

Sr.No.17002 Providing 15mm thick cement plaster in single coat

B+1004+170 on fair side of brick / concrete wall for interior

07A,I.No.17. Rupees Two Hundred Thirty Five and

40.23 plastering upto floor two level & finishing with a 235.71 Smt

Seventy One Paise

17.94, floating coat of neat cement slurry (ii)C M 1:4 (

P.No.135- cement 4 sand) & For First floor.

Providing and laying controlled cement concrete M-

200 and curing complete including the cost of form

work but excluding the cost of reinforcement for Rupees Seven Thousand Three Hundred Fifty

68 Addi. Spec. 8.15 7353.81 Cmt

reinforced concrete work in :(d) Columns, pillars, Three and Eighty One Paise

posts and struts up to floor two level. for Columns

C+1704+170 Providing 10 mm thick cement plaster on ceiling and

soffits of stairs upto floor two level, in cement mortar Rupees One Hundred Ninety Eight and

17.69 + (1:4) (1 cement : 4sand) including neat cement Ninety Three Paise

17.91 slurry.For First Floor

Providing and laying controlled cement concrete M-

200 with curing etc. complete including the cost of Rupees Six Thousand One Hundred Sixty

70 Addi. Spec. 3.79 6161.00 Cmt

form work but excluding the cost of reinforcement One Only

for R.C.C. work at Ground Floor (E) Stair Case

Providing and laying controlled cement M-250 and

curing complete including the cost of form work and

Rupees Seven Thousand Two Hundred

71 Addi. Spec. 5.59 reinforcement for reinforced concrete work in :(B) 7222.51 Cmt

Twenty Two and Fifty One Paise

Walls from top of foundation level upto floor two

Providing and laying chequred pre-cast cement tiles

22 mm,thick with aggregate of size upto 6 mm.In

Ch-14, floor,treads of steps and landing on 20 mm thick bed

Sr.No.14018 Rupees Five Hundred Forty Five and Seventy

20.25 of cement mortor 1:6 (1 cement : 6 coarse sand) or 545.76 Smt

P.123 lime Mortor,1:1:5 (1 Lime putty : 1.5 sand)jointed

with neat cement slurry pigments to match the shade

Providing & laying M-20 grade c. c. curbing of size

600mmx450mmx75mm with curing etc. complete

Rupees Six Hundred Twenty Four and

73 Addi. Spec. 160.00 incl. the cost of form work but excluding the cost of 624.18 Rmt

rainrorcement for road sides, etc. complete as per

Supplying of graded stone aggregate of following

sizes (for W.B.M. Road) (1) Hand broken stone

aggregate 25mm to 90mm size.Spreading the stone

aggregate for rolling and W.B.M. including filling the

interstices to required camber and gradient Rupees One Thousand Two Hundred Sixty

74 Addi. Spec. 28.80 1269.57 Cmt

(excluding spreading of Blindage0 (ii) 40mm to 63mm Nine and Fifty Seven Paise

size aggregates (H.B.) Rolling and consolidation of

soling including filling in depression which occur

during the process, with power roler 8 tonne to

Providing and fixing pre-cast Rubber Dye inter locking

concrete block 60mm thick with grade of concrete

M200 pnumatic compressed by mechanically pressed Rupees Seven Hundred Six and Ninety Two

P.125 and as per approved design including 75mm Sand Paise

layer for levelling and filling the joint with sand in

proper line and level etc complete.

Providing corrugated G.I. sheet of class-3 roofing &

600mm ridge fixed with glavanished iron J or L Hooks,

No. 150012 + Bolts and nuts 8mm diameter with bitumen and G.I. Rupees Seven Hundred Fifty Seven and

limpet washer or G.I. limpet washer. filled with white Eighty One Paise

lead complete excluding the cost of purlins, Rafters

and Trusses.(1) 0.80 mm thick sheet.

Earthwork for embankment including breaking clods,

Ch-26, dressing with all lead and lift (excluding watering and Rupees One Hundred Seventy Seven and

consolidation)(E) From Borrow area within 3.0 Km. Ninety One Paise

Providing and fixing 3mm thick PVC sheets as

signange and display of health signs/information of

required size having retroreflective letters/design as

78 Addi. Spec. 40.00 per requirement,fixing the same through approved 616.10 Rupees Six Hundred Sixteen and Ten Paise Each

adhesive etc. complete work shall be carried out as

per instruction of Engineer-in-charge (Approved make

PVC foamed sheet only) (45 x 15 cms.)

For Door and Window Design 1" th. Outer & Inner Rupees Four Hundred Fifty Six and Ninety

79 Addi. Spec. 25.20 456.92 Rmt

line as per Type B Design Pattern Two Paise

44"x 44" Square Design Pattern Draw in 24"x 24" Rupees Two Thousand Six Hundred

80 Addi. Spec. 6.00 2617.92 Each

circle Seventeen and Ninety Two Paise

NHM Logo (26"x 35") & Ayusman Bharat name size Rupees Nine Thousand Two Hundred

81 Addi. Spec. 1.00 9223.32 Each

18" Twenty Three and Thirty Two Paise

Providing, fixing, testing and commissioning of ABC

type 6 Kg Fire Extinguisher Mono

Ammonium Phosphate Powder 50, Stored Pressure

Rupees Two Thousand Four Hundred Fifty

82 Addi. Spec. 4.00 Type, Pressure Gauge, Controllable discharge 2458.44 Each

Eight and Forty Four Paise

mechanism Class A Rating 3A & Class B rating 21B as

per IS 15683 ISI MARK (ABC Dry Chemical Powder -

Providing and fixing, testing and commissioning of

CO2 type Fire Extinguisher of capacity 4.5 kg filled

with Co2 Gas as per IS 15222 with controll discharge Rupees Six Thousand Sixty Nine and Fifty

83 Addi. Spec. 4.00 6069.60 Each

mechanis, fitted with Hose & Horn applicable on Class Nine Paise

B fire rating 21B confirms to IS 15683 bearing ISI

mark. Co2 cylinder as per IS 7285 .

Providing, fixing, testing and commissioning of below Rupees Three Hundred Sixteen and Twenty

84 Addi. Spec. 4.00 316.23 Each

Auto Glow Signages. Emergency Exit 4” X 12” Three Paise

Providing, fixing, testing and commissioning of below Rupees Three Hundred Sixteen and Twenty

85 Addi. Spec. 4.00 316.23 Each

Auto Glow Signages. Fire Extinguisher 4” X 12” Three Paise

Point wiring for Light / Bell with 2-1.5 sq.mm &

earth wire of 1.5 sq.mm (Green) both are of ISI

marked 1.1 KV grade FRLS PVC insulated multi strand

copper wires up to 10 mtr length , in below type of

pipe erected with 6A Modular type switch / bell push

& accessories and earth continuity of following type,

erected on PVC / Metallic/Wooden box, single Rupees Four Hundred Ninety Three and

mounting base frame covered with Eighty Nine Paise

textured/metallic/white front plate modules erected

on / in wall / ceiling as per pipe erected, with

necessary Lamp holder/ceiling rose / H.D.Connector

as directed.(a) with medium class Rigid PVC pipe and

accessories erected flushed on wall/ceiling complete

Point wiring for FAN with 2-1.5 sq.mm & earth wire

of 1.5 sq.mm (Green) both are of .ISI marked 1.1 KV

Grade FRLS PVC insulated multi strand copper wires

up to 10 mtr length, in below type of pipe erected

with 6A Modular type switch and hum free EME step

type electronic fan regulator mounted and

accessories with earth continuity of following type Rupees Six Hundred Seventy Five and Sixty

erected on PVC / Metallic/Wooden box, single Nine Paise

mounting base frame covered with

textured/metallic/white front plate modules erected

on / in wall / ceiling as per pipe erected. with

necessary ceiling rose / H.D.Connector as directed.(a)

with medium class Rigid PVC pipe and accessories

erected flushed on wall/ceiling complete CAT-III

Point wiring for Individual Plug with & earth wire of

1.5 sq.mm (Green) both are of ISI marked 1.1 KV

grade FRLS PVC insulated multi strand copper wires

up to 10 mtr length, in below type of pipe erected

complete with Modular type switch & 5 pin Plug

erected on PVC / Metallic/Wooden box covered with

Rupees Five Hundred Twenty Four and

88 1-2-3. 20.00 appropriate front plate modules erected on / in wall / 524.19 Pt.

ceiling as per pipe erected with following type of

accessories.[I] For 6A Plug and 6 a switch with 2-1.5

sq.mm Cu. Wire from nearby switchboard/mcb db

board(a) with medium class Rigid PVC pipe and

accessories erected flushed on wall/ceiling complete

[II] For 16A Plug and 16 amp switch with 2-2.5 sq.mm

Cu. Wire from mcb db board.(a) with medium class Rupees Seven Hundred Eighty Eight and

Rigid PVC pipe and accessories erected flushed on Eighty One Paise

wall/ceiling complete CAT-III

[III] For 16A Plug and 16 amp switch with 2-4 sq.mm

Cu. Wire with 2.5 sq.mm ( green) earthing wire from

Rupees Nine Hundred Thirty and Twenty

90 1-2-3. 10.00 mcb d b board.(a) with medium class Rigid PVC pipe 930.21 Pt.

and accessories erected flushed on wall/ceiling

complete CAT-III

Point wiring for on board Looped Plug with 6A

Modular type switch & 5 pin socket erected on PVC /

Metallic/Wooden box, single mounting base frame Rupees Two Hundred Eighty Three and

covered with textured / metallic/white front plate Eighty One Paise

modules erected on / in wall / ceiling with following

type accessories CAT-III

Providing following type of Modular Type Accessories

mounted with PVC / metallic/Wooden box, single

mounting base frame covered with textured /

Rupees One Hundred Seventy Nine and

92 1-2-6. 6.00 metallic/white front plate , modules erected with 179.78 Ea.

Seventy Eight Paise

necessary connections as per site situation directed

by Engineer In charge.(3) Two Pin/RJ-11 Telephone

Socket[A] For One Gang CAT-III

Rupees One Hundred Seventy Nine and

93 1-2-6. 3.00 (4) TV Co-axial Socket outlet CAT-III 179.78 Ea.

Seventy Eight Paise

94 1-2-6. 10.00 (7) Blank Plate Single CAT-III 28.28 Rupees Twenty Eight and Twenty Eight Paise Ea.

Rupees One Hundred Seventy Nine and

95 1-2-6. 4.00 (8) Computer RJ-45 socket CAT-III 179.78 Ea.

Seventy Eight Paise

Providing and erecting ISI mark Medium class RIGID

PVC PIPES of following size complete to be erected

on/in wall or ceiling erected with necessary PVC

96 1-3-2. 180.00 36.36 Rupees Thirty Six and Thirty Six Paise Mtr.

fittings & Junction boxes fixed with adhesive solution

& Clamps with following dia of pipes, in approved

manner as directed (b) 25 mm

Decorative call bell Ting-tong box type 250 volts

97 1-6-12. 2.00 79.79 Rupees Seventy Nine and Seventy Nine Paise Ea.

complete erected

Providing and erecting Mains with 1.1 KV grade FRLS

PVC insulated ISI marked stranded Copper conductor

wire in following type of pipe to be erected

concealed in /flushed on wall/ceiling, with 1.5 sq. mm

98 1-4-1. 430.00 90.90 Rupees Ninety and Ninety Paise Mtr.

copper conductor FRLS PVC insulated stranded wire

of green colour for earth continuity of following size

(A) with medium class Rigid PVC pipe and

accessories(b) 2 wire 2.5 sq. mm

Providing and erecting Mains with 1.1 KV grade FRLS

PVC insulated ISI marked stranded Copper conductor

wire in following type of pipe to be erected in / on

Rupees One Hundred Twenty Four and

99 1-4-2. 290.00 wall / ceiling with 2.5 sq. mm copper conductor FRLS 124.23 Mtr.

Twenty Three Paise

PVC insulated stranded wire of green colour for earth

continuity of following size(A) with medium class

Rigid PVC pipe and accessories(a) 2 wire 4 sq. mm

Rupees One Hundred Sixty Three and Sixty

Providing & Erecting approved make following size of

TV Co-axial flexible cable comprising inner conductor

of solid bare copper insulated with Foam PE &

101 1-4-6. 90.00 43.43 Rupees Forty Three and Forty Three Paise Mtr.

Secondary conductor made of poly - Aluminium film

bonded Al. Braids @ suitable coverage overall

sheathed with black PVC insulation.b).RG-6

Supplying & erecting approved make LAN cable of

102 1-4-8. 160.00 following size in existing pipe as per direction[D] CAT - 84.84 Rupees Eighty Four and Eighty Four Paise Mtr.

Supplying & erecting M.S. Box having 16 Gauge

painted with red oxide or Heavy duty PVC box

103 1-5-1. 10.00 erected flushed on wall or concealed in wall with 51.51 Rupees Fifty One and Fifty One Paise Ea.

necessary plastering & finishing as directed of

following size.(a) 100 mm x 100 mm x 75 mm(d)

Providing & erecting Switch board for Computer or

electric apparatus consisting of following modular

type accessories mounted with PVC / Metallic

concealed/open box with single mounting base frame

covered with textured/metallic /white front

Rupees One Thousand Two Hundred

104 1-6-2 (B) 5.00 plate,modules erected with necessary connections as 1274.62 Ea.

Seventy Four and Sixty Two Paise

1 no. 6A/16A universal plug-switch combined.

3 nos. 6A Switch

3 nos. 6A 5 pin Plug For Modular Type Accessories

Supplying and erecting LED indoor fittings with LEDs

of wattage 0.2 Watt to 0.5 Watt assembled on single

MCPCB, with housing used as a heat sink shall be

made of thick sheet Steel conforming to IS:

513/CRCA/ aluminium die cast powder coated and

high U.V. & corrosion resistance with diffuser with

company mark/name

120 to 300 V,Power Factor more than 0.9, THD <

CCT 3000 K to 6500K,

Rupees Four Hundred Thirty Nine and Thirty

105 2-15-1. 45.00 Luminaire efficacy> 85 lumens/watt ,LED efficiency- 439.35 Ea.

110 lumens/watt

LED driver efficiency > 85 %

CREE / OSRAM / PHILIPS Lumileds / NICHIA /

SEOUL/Bridgelux make LED used for luminaire. (

fitting required LM-79 & LM-80 Certificates)(NOTE:

Below description have shown ranges of Wattage

capacity of LED fittings.The Engineer incharge may

select any wattage capacity between the ranges

shown.)(A) Tube Light with integral driver(d) 22-24

Watts, Surge - 2KV,IP-20, 4 feet CAT-III

Supplying and erecting led lamps with following

wattage capacity of 220 to 240 voltage, minimum

15000 burning hours life, 500 V in built-surge

Rupees One Hundred Thirty One and Thirty

106 2-15-2. 20.00 protection,Polycarbonate diffuser, mounting suitable 131.30 Ea.

for E14 / E27 / B22 lamp holders, pf >= 0.5(ii) 5 to

Supplying and erecting LED street light / Flood light

fittings with High power White LEDs wattage of

1Watt and above assembled on single MCPCB,

efficiency more than 130 lm/w and corrosion free

High pressure die cast aluminum housing with

smooth finish powder coated and heat sink extruded

aluminium with diffuser and Polycarbonate optics/

lenses with company mark/name engraved or

embossed 120 to 300 V,Power Factor more than 0.95,

THD < 10 %, CCT 3000 K to 5700K,

Uniformity ratio >0.45, Luminaire efficacy> 100 Rupees Five Thousand Eight Hundred Ninety

lumens/watt . LED driver efficiency > 85 %.CREE / Six and Thirty Eight Paise

OSRAM / PHILIPS Lumileds / NICHIA / SEOUL/

BridgeLux (U.S.A.) make LED used for luminaire. (

fittings required LM-79 & LM-80 certificates)(NOTE:

Below description have shown ranges of Wattage

capacity of LED fittings.The Engineer incharge may

select any wattage capacity between the ranges

shown.)(A) Street Light (IP-65), Surge protection -4KV

integral and 10 kv non integral ,Light must have

440VAC line supply protection. It should withstand

hours for 440VAC line supply.(ii) above 48 to

Providing and erecting Approved make Ceiling fan

with double ball bearing ISI mark with condenser A.C.

Rupees One Thousand Eight Hundred Eighty

108 5-1-1. 24.00 23OV.50 c/s.1200 mm. sweep complete, canopy 1883.65 Ea.

Three and Sixty Five Paise

erected on existing hook or clamp with earthing.

[Make shall be approved by Engineer in charge]

Supplying and erecting 19 / 20 mm. nominal bore

Medium Class M.S. Pipe down rod erected duly Rupees One Hundred Twenty Six and

painted for fan complete with proper insulation Twenty Five Paise

without leakage and earthing.

Supplying & erecting fan hook box of 10 mm M.S.

round bar bounded to the RCC bars up to 50mm

Rupees One Hundred Twenty Six and

110 5-2-3. 24.00 length each side and pierced through a 16 Gauge 126.25 Ea.

Twenty Five Paise

M.S. box / Heavy Duty PVC box complete erected

concealed in Ceiling with necessary finishing.

Providing 2.5mm.thick laminated acrylic sheet to

111 5-2-5. 24.00 20.20 Rupees Twenty and Twenty Paise Ea.

cover the fan hook or Fan box.

Providing & erecting 240 V MCB double pole switch

for lighting Load (B Curve) having 10 KA breaking Rupees Three Hundred Twenty Eight and

capacity & confirms to IS : 8828 in existing box having Twenty Five Paise

following capacity (A) 6 to 32 Amp. CAT-III

Sheets steel powder coated enclosure suitable for

113 3-11-4. 3.00 207.05 Rupees Two Hundred Seven and Five Paise Ea.

incorporating One/Two nos. MCB.

Providing and erecting Miniature circuit breaker

single pole 6A to 25A suitable to operate on 240 V

Rupees One Hundred Thirty One and Thirty

114 3-10-1.-B 64.00 A.C. system and having breaking capacity 10 KA to be 131.30 Ea.

erected in existing box. confirming to IS 8828/1996

with ISI Mark CAT-III

Providing & erecting 415V MCB Four Pole Switch for

Lighting Load (B curve) having 10KA breaking capacity Rupees Seven Hundred Fifty Two and Forty

& confirms to IS :8828 in existing box having Five Paise

following capacity(b)40 Amp. CAT-III

Supplying & erecting 20 Amp 10 KA ‘C Curve’

single pole MCB with 20 Amp. Plug socket, company

Rupees Six Hundred Twenty One and Fifteen

116 3-10-6-A 5.00 fabricated powder coated sheet steel enclosure 621.15 Ea.

erected as directed with connection. [A] Metal Clad

Socket with metal clad top CAT-III

Providing and erecting Sheet Steel powder coated

MCB distribution board - flush / surface mounted

fitted with busbar, neutral link, earth bar and DIN rail,

Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without

Rupees Four Thousand Twenty Five and

117 3-11-5. 4.00 MCB to house appropriate nos. of MCBs.(The DBs 4025.86 Ea.

Eighty Six Paise

should be used of same company of MCB to be used)

suitable for(B) three phase incoming and single phase

horizontal type outgoing Per phase isolation type

(PPI)(b) sheet steel double door(iii)8 way

Supplying & erecting approved make RCCB + MCB

(Electro magnetic type only) working on residual

current device having 10 KA short circuit breaking

capacity and 30 mAmp. Sensitivity & 30 mili sec.

tripping time conforming to IS 12640 test knob facility Rupees Two Thousand Two Hundred Ninety

trip free mechanism operating for rated leakage at Two and Seventy Paise

nominal ten volt, complete erected including all

materials lugs screws etc. completed.[b] 32A / 40A,

pole Single Phase

Supplying & erecting in earthpit of minimum bore dia.

225mm size approved make Safe Earthing Electrode

consisting Pipe-in-Pipe Technology as per IS 3043-

1987 made of corrosion free hot dipped G.I.Pipes

having Outer pipe dia of 80 mm having 80-200

Micron galvanising, Inner pipe dia of 40 mm having

200-250 Micron galvanising, connection terminal dia

of 14 mm with constant ohmic value surrounded by Rupees Six Thousand Eight Hundred Ninety

highly conductive compound with high charge Three and Twenty Five Paise

dissipation suitable for following type of applications

with chamber and heavy duty cover.(approved make

OEM has to submit test certificate including value of

earth resistane of installation.[A] For electrical

installation up to 440 V

Length of Pipe - 1 Mtr

Back filling compound - 1 Nos. of Bag of 15 Kgs.

Providing and erecting Annealed bare Copper wire 8 Rupees Nine Hundred Thirty Seven and

to 16 SWG. Twenty Eight Paise

Providing & erecting weather proof, dust & vermin

proof, floor mounted front operated indoor type

cubical panel board necessary IP-42 and above

protection as per approval from engineer incharge

made from 14 SWG thick CRC M.S. sheet for outer

body & doors, 16 SWG thick CRC M.S.sheet for

internal partitions with necessary accesories

supporting angles/ flats channel including cutting,

bending, drilling, welding, riveting with internal

partitions & cable alley as per requirements &

instruction of engineer-in-charge with erection of Rupees Twelve Thousand Three Hundred Sq.Mt

supplied switch gears, BUSBARS, suitable size of inter Fifty Two and Thirty Paise

connecting PVC copper wire / copper-aluminium

strips, rubber grommets, rib, bakelite control

fuses/MCB for measuring instruments, earth bus &

earth bolts, foundation flange - bolts-base Plates,

sufficient nos. of hinged doors, handles with locking

arrangement and rubber gasket,heavy duty end

terminal connection,danger notice board,necessary

ventilation,earthing strip complete. The Panel shall

be painted with epoxy powder coating. (The rates

excludes the cost of switchgears, bus bars, inter

Providing and erecting busbar chamber confirming to

IS-375 fabricated from 16 G.M.S. sheet, dust &

vermin proof having hinged door with rubber gasket

and necessary busbar supports with COPPER busbar

having current density not more than 1.6 Amp. /

sq.mm (Rated current / cross section area) duly Rupees Five Thousand Two Hundred Sixteen Rn.Mt

wrapped with colour insulation tape for phase and Sixty Five Paise

sequence, three phase & neutral each suitable for

following current capacity with necessary painting

mounted on wall or pedestal frame of required size

with necessary connections.(A) Suitable for 63/100

providing and erecting Mains with ISI marked, 1.5KV

grade electrolyte multi stranded, annealed copper

conductor with heat resistant PVC insulated conforms

to IS 694, IEC - 227 erected in existing pipe of

123 1-4-4. 25.00 102.01 Rupees One Hundred Two and One Paisa Mtr.

following size (Specifically for control panel, relays,

power switchgears, motor starters & control wiring)

with required size of copper lugs, nuts and bolts if

required.(f) One wire 10.00 sq. mm

providing and erecting Approved make Four pole

moulded case circuit breaker having breaking capacity

ICU of 25 KA. at 415 V,having normal current rating

up to 25 A to 100A. with Fixed thermal & magnetic Rupees Seven Thousand Two Hundred

release suitable to work on A.C. supply 50 c/s. with all Eighty Two and Ten Paise

internal connections & complete erected in existing

16 G.M.S. housing. ICS=100% of

ICU only Cat III

Supplying and erecting approved make suitable panel

125 9-2-9. 1.00 indicator lamps of LED type lamp, lens cover, Bakelite 50.50 Rupees Fifty and Fifty Paise Ea.

holder complete erected with necessary connections.

Supplying and erecting B class Galvanized iron pipe

having smooth finished bore of the pipe on both ends

Rupees Two Hundred Ninety Two and Ninety

126 6-5-5. 10.00 erected nuts and bolts along the pole / wall shaping 292.90 Mtr.

the pipe as per site requirement. Pipe dia as

following.(c ) 40 mm dia.

Supplying and erecting horizontal / vertical mounting

type storage water heater with copper container

housed in M.S./S.S. body insulated with glass wool /

puff complete with heating elements,adjustable Rupees Nine Thousand Four Hundred

thermostats 300C to 850C, indicating lamp, safety Seventy Three and Eighty Paise

valve, fusible plug, etc.complete erected with coach

bolts, nuts. washers & cementation (C)25 Ltr. with

KW. heating element CAT-III

Providing and erecting approved make split air-

conditioning unit consisting of copper condensing

unit with fan motor, hermetically sealed rotary

compressor with accessories etc. duly connected

separately erected evaporating unit and blower

Rupees Thirty Nine Thousand Four Hundred

128 8-3-1. 2.00 motor with its accessories by means of extra supplied 39440.50 Ea.

Forty and Fifty Paise

proper insulated copper tubing,drain PVC pipes

suitable for ( cost includes powder coated Stand, Eco

Friendly green gas charging, 15A plug top & Remote

Control) with necessary core cutting.For 3 Star Rating

of current year(b) for 1.5 ton capacity

Providing & erecting water cooler having storage

capacity 150 Ltr. & cooling capacity 150 Ltr.per hour

@ an ambient temp of 45˚ C. The outlet temp. of the

water should drop by 15˚C within a hour, The water

cooler should be comprising of hermetically sealed

129 8-13-2. 1.00 55045.00 Rupees Fifty Five Thousand Forty Five Only Ea.

compressor, fan motor, condensing unit, water tank

surrounded by evaporating, coil, thermostats, relay

etc.complete with necessary inlet & outlet

connection. The body of water cooler will be made

from Stainless Steel.

Supplying & erecting 5 stage single reverse osmosis

water purification system with M.S. powder coated

frame, prefilter housing with 'O' ring presediment

filter GAC filter, carbon filter suitable buster DC pump

capacity 80 psi, mention with 40 psi inline type post Rupees Twenty Eight Thousand Seven

carbon filter auto low & high pressure switches with Hundred Eighty Five Only

following size of storage tank & LPH capacity &

erected as directed with one year comprehensive

maintenance guarantee.[C] 50 Ltr / Hr with 250 psi

nos booster pump

Providing & erecting open well type horizontal mono

block pump set with stainless steel body having

following specification (B) 1 H.P. single phase open Rupees Eleven Thousand Three Hundred

well motor pump set suitable for 185 LPM discharge Forty Two and Thirty Paise

@ 25 mtr. head, suitable for 32 mm dia. Delivery pipe

with control panel.

Lowering of submersible motor pump set at the

depth of following ,complete with required. Nos. and

size of casing pipes erected by means of proper chain

pulley block & pipe wrenches after checking of Per

132 9-6-18. 2.00 1010.00 Rupees One Thousand Ten Only Job

threads of each pipe with coupling to take the load of

the pump set and pipe assembly filled up with water

(d)For Open well Horizontal submersible pump set

for sump well (i) 1 HP to 5 HP

Providing and erecting ISI marked PVC insulated PVC

Sheathed Flat flexible Submersible copper cable

133 9-7-1. 90.00 75.75 Rupees Seventy Five and Seventy Five Paise Mtr.

approved make of following Size. (a) 3 Core x 1.5 Sq.

Supplying ISI Marked (Embossed) following size of

Heavy duty “C” Class G.I . Pipe & erecting as directed Rupees Two Hundred Ninety Seven and

by Engineer-in-charge with necessary plumbing as Ninety Five Paise

desired.(C) 40 mm dia

Supplying and erecting Direct - On - Line Starter with

18 A. rating contactor and with 3.5 Amp. 18A range

directly operated in totally insulated elegant Rupees Two Thousand Two Hundred Sixty

enclosure for single phase operation up to 3 HP as and Thirty Eight Paise

per IS 13947 complete erected on P.W. Block with

necessary connection. Cat-lll

Providing Water proof straight Joint in PVC insulated

flat flexible copper cable by using insulating material, Rupees Two Hundred Twenty Two and

water proofing material, & making the joint complete. Twenty Paise

Supplying & erecting approved make low noise

decorative exhaust fan having square frame ABS body Rupees Two Thousand Nine and Ninety

with inbuilt lowers & square frame.200mm with Paise

Rate For getting New 3 phase power supply

connection & Energy meter from power supply co. Rupees Twenty Five Thousand Two Hundred

Including Accessories, wire, preparation, load wire Fifty Only

etc. (up to 50 mtr) (up to 15 KW)

IN WORDS:- Rupees One Crore Seventy One Lac One Thousand Nine Hundred Seventy One and Seventy Four Paise

I / We am / are willing to carry out the work at

percent ( Should be written in figures and words) of the Estimated rates mentioned above. Amount of my/our tender works out as under.

Estimated Amount put to tender. Rs.1,71,01,971.74

1 All work shall be carried out as per Public Works Department Handbook and other specifiations of Division or as directed.

2 All the column is Schedule should be filled in ink and the entries in the last column should be struck by the cotractor under his signature.

Rates quoted include clearance o site (prior commencement of work and at its close) in allrespects and hold good for work under all conditions, site, moisture,

4 Serviceble material available (if any) after Demolishing / Dismentalling any item should be hand over o the concerned PIU Site Engineer In Charge.

Signature of the contractor with seal: Signature of the Contracting Authority with seal: