Re-conditioning, Operation and Annual Maintenance of Streetlights at Harohalli Industrial Area, 1st and 2nd Phase, Ramanagara District.

Re-conditioning, Operation and Annual Maintenance of Streetlights at Harohalli Industrial Area, 1st and 2nd Phase, Ramanagara District.

Part-A: Repair & Reconditioning work: Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concea...

Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers 100 Amps , complete with all lead and lift etc, as per specification and dir...

Supply and fixing of Heavy Duty Copper Terminal Long Barrel. 25 Sqmm Copper Terminal, Apprx Wt: 11 Gm, complete with all lead and lift etc, as per specification and direction of Engineer in charge.

Supplying and fixing Microprocessor based Electronic timer (without contactor, Din Mounting using necessary bolts, nuts

and washers etc.,.) 3-120sec setting., complete with all lead and lift etc, as p...

Supply and fixing of 4 pole power contactor with NO/NC contacts on existing wood/panel board using necessary bolts, nuts, washers and wiring etc., complete with AC-3 Rating and as per IS-13947. , comp...

Supplying & Fixing minature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF energy cross-3 with short circuit breaking capaci...

Supplying & Fixing minature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF energy cross-3 with short circuit breaking capaci...

Supply of Epoxy Terminating Kit (Pothead) suitable for 1.1 kV, LTUG Cable Up to 4C x 50 Sqmm , complete with all lead and lift etc, as per specification and direction of Engineer in charge.

Supply of LT AC 3 Phase 4 Wire, 5-30 Amps DLMS Complaint Energy Meter, 1.0 Accuracy Class , complete with all lead and lift etc, as per specification and direction of Engineer in charge.

Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polyc...

Fixing halogen/metal halide/SVL/IL/LED floodlight fitting over existing pole / wall ceiling including clA, bolts, nuts and wiring using suitable capacity wires, complete with all lead and lift etc, as...

Fabricating supplying and mounting MS box made out ....SWG suitable for floor /wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped...

Supplying and fixing hylum plastic sheet 3mm thick with necessary nitches for fixing switches, regulators etc., and fixing on existing wood or metal box using N.F. screws., complete with all lead and ...

Supplying and fixing angle iron frame work fabricated out of MS angle iron..and MS flat…with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint, complete...

Supply of 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-397...

Earth work excavation for cable trench of 0.5 to 0.75 Mtr. Width and Depth upto 1 Mtr including trial pits, depositing on bank upto a lead of 50 Mtr, Supplying and Displaying necessary Danger Boards a...

Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff LT Cable 2.5 to 25 Sqmm , complete with all lead and lift etc, ...

Refilling the cable trenches with selected available earth from trench excavation including watering, consolidation in layers of 15 cm. Thickness including depositing of the surplus earth with a lead ...

Supply and Fixing of 1.1KV, LT Aerial Bunched Cable, confirming to IS-14255:1995 XLPE insulation 3x16+1x25+1x16 Sqmm Street light (Insulated messenger cum Neutral), complete with all lead and lift etc...

Labour charges for Stringing of 1.1kV grade aerial bunched 3 core cable of XLPE insulation ofsize (3x95) (for Phase conductor) + (1x70) (insulated messenger neutral) +(1x25) for street light control, ...

Dead End Clamp/Anchor Clamp Assembly 16 to 70 Sqmm Bare Messenger(Exclusive of pole clamp and eye hook), complete with all lead and lift etc, as per specification and direction of Engineer in charge.

Supply of GI Grounding pipe, B - Class, 42 mm dia, 2.5 Mtr long, 3.2 mm thick with bolt, nut, GI Strips and washer complete Minimum Weight of GI Pipe: 7.3 Kg b)Good Quality well burnt Charcoal for gro...

Fixing of GI grounding Pipe type earthing B - Class, 42 mm dia, 2.5 Mtr long, 3.2 mm thick with bolts nuts, GI Strips and washers complete Minimum Weight of GI Pipe: 7.3 Kgs, complete with all lead a...

Supplying, and fixing of Hot dip Galvanized M.S.Bracket suitable for out door luminaries and mounted on Octagonal pole using

necessary bolts, nuts etc., complete. Double Arm Bracket with 2000 mm Stan...

Foundation with CC 1:2:4 [M-15] Using

20mm Nominal size graded crushed coarse

aggregates , complete with all lead and lift etc, as per specification and direction of Engineer in charge.

Providing Reinforecement TMT Fe 550/550

D , complete with all lead and lift etc, as per specification and direction of Engineer in charge.

Painting of existing street light pole after scrapping the old paint and painted with suitable colour enamel/Silver paint including

coping/footing of the pole. 8m & above streetlight pole., complete w...

Supply & installation of CCMS-10KVA, Rated Input voltage, 240 Volts & 415V AC, 50Hz, KVA Rating upto 10KVA, Current rating - 12A/24A/32A (Single & Three phase), connection single three phase-2 wire /4...

Part-B Maintenance Work: Operation and annual maintrnance of LED street lighting system including replacement of damaged/failed/fused out components like LED drivers, LED array, MCPCB, surge protectiv...