PROVN OF GUARD ROOM WITH TOILET AND BATH AND SEWAGE LINE MANHOLE CHAMBER SEPTIC TANK IN R O BLDGS OF GROUND LINE GANDHI LINE OFFRS MD ACCN AT CHAUBATTIA UNDER GE RANIKHET

Amount

BOQ ( Sch 'A') B/R items Surface dressing n.exc 15cm deep n soft /loose soil complete all as specified and directed.

Surface excavation n.exc 30cm deep and averaging 15cm deep and getting out in hard/dense soil complete all as specified and directed.

Rough excavation n. exc 1.5 deep and getting out in hard/dense soil complete all as specified and directed.

Excavating in trenches in hard / dense soil n exc 1.50 m wide and n exc 1.50 m in depth for foundation for pipes, walls, cesspits, manholes, pier holes, cables etc n exc 10 Sqm on plan and n exc 1.50 m in depth and getting out complete all as specified and directed .

Returning, filling in, spreading, leveling, watering and well ramming in layers not exceeding 25cm thick each in hard / dense soil complete all as specified.

Removal of excavated spoil to a distance not exc. 50m and depositing where directed at a level not exc. 1.5m above the starting point complete all as specified.

Material & Labour for plain cement concrete 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in foundation, filling mass concrete complete all as specified and directed.

Material & Labour for plain cement concrete 1:3:6 type C-2 (using 40 mm graded stone aggregate) as in foundation, filling mass concrete complete all as specified and directed.

Material and labour cement concrete (1:3:6) type C-2 using 40mm graded crushed stone aggregates as in surface channels and drains finished even and smooth incuding necessary form work complete all as specified

Material & Labour for Extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc complete all as specified and directed.

Material and labour for 40 mm thick Damp proof course to horizontal or vertical surfaces including necessary form work in cement concrete 1:2:4 type B-0 using 12.50 mm graded crushed stone aggregate complete all as specified .

Material and labour for hard core of broken stone granite of gauge not exceeding 63 mm deposited, spread, levelled , watered and hand packed or ramming to a true surface in layers not exceeding 15 cm thick each layer complete.

Material & Labour for 75mm thick PCC 1:4:8 type D2 using 40mm graded crushed stone aggregate as in sub base, sub floor, pavivg etc including necessary form work complete all as specified and directed.

Material & Labour coloured non skid ceramic tiles 7 to 8 mm thick ( square/ rectangular) area of each tiles exc. 0.06 sqm but n.exc. 0.11 sqm as in floors etc set and jointed in neat cement slurry and pointed in white cement with colour pigment over and including 15mm thick bedding layer in CM 1:4 complete all as specified and directed.

Material & Labour for Glazed ceramic coloured tile of size 300x200x7mm thick fixed as in vertical surface etc, set and jointed in neat cement slurry and pointed with white cement with colour pigment to match over and including 10mm thick rendering in CM 1:4 complete all as specified and directed.

Material and labourr reinforced cement concrete 1:2:4 type B1 using 20 mm graded crushed stone aggregate as in slab supported on walls, beams, lintal, landing, balconies, canopies, deck slabs and in shelves and the like etc complete all as specified.

Material and labour reinforced cement concrete 1:2:4 type B0 using 12.5 mm graded crushed stone aggregate as in Beams,cantilevers, bressummers, lintel over 1.5m span complete all as specified

Material & labour mild steel reinforcement TMT bars 10mm dia and over cut to length, bent to shape required including cranking, bending, spirally for hooping for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified.

Material & labour mild steel reinforcement TMT bars 6mm to 8mm dia cut to length, bent to shape required including cranking, bending, spirally for hooping for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified.

All per item No 19 herein bebore but 5mm dia and over upto and including 10mm dia in strrups, spacers and binders

Use and waste of Formwork to soffits of suspended slabs such as roof slab, floor slabs landings for rough finished surfaces of concrete flat not exceeding 200mm thick complete all as specified.

Use and waste of formwork to sides and soffits of floor or roof beams, beam haunching, lintel cantilevers, shelves including support etc for fair finished surface of concrete complete all as specified and directed.

Material & Labour for brick work with sub class 'B' bricks using old size bricks straight or curved on plan exc 6 mtr mean radius, built in CM 1:4 complete all as specified and directed.

Material & Labour for precast cement concrete block masonry with solid block of cement concrete 1:2:4 type B-1 ( using 20 mm graded crushed stone aggregate) exc 10 cm in width and setting in CM 1:6complete all as specified and directed.

Material & Labour for precast cement concrete block masonry with solid block of cement concrete 1:3:6 type C-1 ( using 20 mm graded crushed stone aggregate) exc 10 cm in width and setting in CM 1:6complete all as specified and directed.

Dissmantling of cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking of trenches , if required bore of pipe 150 mm complete all as specified

Supply and Fixing 150 mm bore cast iron pipes with spigopt and socket ends centrifugally cast , class LA, in any length, laid in trenches or floor complete all as specified.

Material & Labour Salt Glazed stone ware drain pipes Grade 'A' ISI marked laid in trenches and jointed as specifed 150mm internal dia of pipe complete all as specified

Material & labour for cement concrete (1:4:8) type D-2 using 40mm graded crushed stone aggregate, concrete bed laid to falls in trenches in any depth including packing under and haunching against the sides of SGSW pipes 150mm bore after the pipes have been laid and tested all as specified (SGSW pipes shall be measured and paid separately)

Material & labour for cement concrete (1:3:6) type C-2 using 40mm graded crushed stone aggregate, concrete bed laid to falls in trenches in any depth including packing under and haunching against the sides of SGSW pipes 150mm bore after the pipes have been laid and tested all as specified (SGSW pipes shall be measured and paid separately)

Cutting into existing man holes for for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section ) in cement concrete 1:2:4 type B-1 smooth finished and reforming benching as required for 150 mm internal dia of pipe complete all as specified and directed

Material & Labour for plain cement concrete 1:2:4 type B1 (using 20 mm graded crushed stone aggregate) as in benching, channel of manholes,coping and similar work rounded or chamfered on edges and like including weathering, slightly rounded or chamfered angles and throating etc incuding necessary form work complete all as specified. complete all as specified and directed.

Material and Labour Precast reinforced cement concrete 1:2:4 type B-1 using 20mm graded crushed stone aggregate in cover slabs (for manholes etc), shelves and similar articles with plain faces including necessary moulds and setting in cement mortar 1:6 including necessary form work complete all as specified and directed. (reinforcement to be measured separately)

Material and labour for 15mm thick cement plaster in CM 1:4 on fair faces of brick or concrete surfaces and finishing the surface even and smooth without using extra cement complete all as specified and directed.

Material and labour for 10mm thick cement plaster in CM 1:4 on fair faces of brick or concrete surfaces using WPC where ever required as per manufacturerer's instructions and finishing the surface even and smooth (without using extra cement) complete all as specified and directed. NOTE -WPC shall be measured and paid separetely.

Material and labour for rendering 15mm thick in CM 1:6 on fair faces of brick work or concrete surfaces and finishing the surface fair and even (without using extra cement) etc. complete all as specified

Material & Labour for 15mm thick rendering in CM 1:6 on stone masonary surface or surface other than fair face of brick work , finishing the surfaces fair and even complete all as specified and directed.

Supply only water proofing compound complete all as specified and directed.

Material and Labour for preparing newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.

Material & labour for preparing new plastered or unplastered surfaces of walls, applying a layer of wall care putty 2mm thick (averaging) on wall surfaces including cornics etc for proper levelling of plaster and applying two coat of oil bound distemper over a coat of primer complete all as pecified and directed.

Material & labour for preparing new plastered or unplastered surfaces of walls, and applying two coats of cement base paint over a coat of primer with alkali resistant priming paint complete all as pecified and directed.

Material & labour for complete removal of existing treatment of wallsand applying two coats of cement base paint over a coat of primer with alkali resistant priming paint complete all as pecified and directed.

Material & Labour for 75mm thick cement concrete 1:3:6 type C-2 (using 40mm graded crushed stone agg) as in plinth protection laid to slope in bays and finishing the surfaces of concrete topping fair and even and exposed edges fair or rounding or chamfering laid in panels including necessary form work complete all as specified and directed.

Supply & Fixing 2nd class hard wood (SAL) plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered put together with glue, pinned at joints and fixed to any position complete all as specified and directed.

Supply & Fixing 35mm thick (batten thickness) IInd class hard wood plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged) or of 12mm thick veneered particle board medium density, wood particle board with commercial face veeneers complete all as specified and directed.

Supply & Fixing 35mm thick IInd class hard wood glazed and skelton shutters open rebated and prepared to receive glass, guage etc, divided into square , with plain chamfered or rounded, fitted with cut and mitred and rebated sash bars any number for securing glass, guage etc.size of members of shutters as specified in MES SSR Part-I, Section 8, Clause 8.24 (a) complete all as specified and directed.

Supply & Fixing 30mm thick IInd class hard wood glazed and skelton shutters open rebated and prepared to receive glass, guage etc, without sash bars, edges of framing plain chamfered or rounded, fitted with cut and mitred beads for securing glass, guage etc, size of members of shutters as specified in MES SSR Part-I, Section 8, Clause 8.24 (b) complete all as specified and directed.

Supply & Fixing of factory made soild PVC door frame of size 50mmx47mm made out of 5mm thick single side prelam PVC sheet reinforced with mild steel square tube and edges will be painted to match with single side prelam sheet as per specification and drawing given on MES schedule Part-II (2010) complete all as specified & directed.

Supply & fixing factory made solid panel PVC door shutter 30mm thick (style) consisting of frame work made out of MS tubes for top or bottom rail MS frame shall be covered with heat moulded plain colour PVC 'C" channel having a PVC sheet for strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail, and bottom rail panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to stiles and rail with suitable PVC sheets beading and jointed together with solvent cement supplying and fixing in the frame at site as specified in cluase No 8B.2.1.of SSR Part-II 2010. thickness of inserted panel not less than 10mm thick complete all as specified and directed.

Supply & Fixing frame work such as in guard bar, gate grills, grating , made of hollow tubular section etc with ends of bars shouldered and/or rebated,or forged into spike frame guard bars,wake way,railing,frame work of water tank and similar work confirming to Fe-410-w (Gde 250) complete all as specified and directed.

Material & Labour for preparation of new or previously untreated wooden surfaces of any description,not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Material and labour for applying two coats of synthetic enamel paint over a coat of red oxide, zinc chrome primer on steel surfaces of any description , over 10 cm width or girth, not otherwise described including preparation of new surfaces complete all as specified.

Supply & Fixing 100mm size MS butt hinges, medium weight, cold rolled complete all as specified and directed.

Supply & Fixing 75mm size MS butt hinges, medium weight, cold rolled complete all as specified and directed.

Supply & Fixing 150mm long Aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.

Supply & Fixing 100mm long Aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.

Supply & fixing Aluminium alloy, anodised, sliding door bolt with haps, staple (bolt type) and fixing clips with sheet, cast and extruded section and fixing bolt and sliding bolt of extuded sections or cast aluminium alloy and fixed 250 mm long complete all as specified and directed.

Supply & Fixing 125 mm size aluminium alloy handle, fabricated type anodised complete all as specified and directed.

Supply & Fixing 3 mm thick sheet glass, ordinary quality and glazing with oil putty in square not exc 0.50 Sqm in each pane complete all as specified and directed.

Supplying and fixing stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified.

Supplying and fixing harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc complete all as specified.

Material & Labour for 15mm bore GI tubing, medium grade, galvanised with and including all GI fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.

Material & Labour for 20mm bore GI tubing, medium grade, galvanised with and including all GI fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.

Supplying and fixing 110 mm bore PVC ( SWR) bends any radius complete all as specified.

Supplying and fixing 75 mm bore PVC ( SWR) bends any radius complete all as specified.

Supplying and fixing 110 mm bore PVC ( SWR) vent cowl complete all as specified.

Supply and fixing pillar tap 15mm dia cast copper alloy with capstan head chromium plated fancy type, screwed down high pressure, with or without letters ‘Hot’ or ‘Cold’ with long screwed shanks and fly-nuts, screwed for iron pipe Complete all as specified .

Supply and fixing bib tap 15mm dia cast copper alloy, chromium plated fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule Complete all as specified .

Supply and fixing 15mm bore stop valve chromium plated fancy type cast copper alloy , screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union complete all as specified .

Supplying and fixing white PVC valve less syphonic action type low level flushing cistern of 10 ltrs capacity with inlet ball valve, float valve, handle including pipe 32mm dia of PVC(Heavy duty) flush pipe, brackets complete all as specified.

Supply and fixing vitreous china wash hand basin white of minimum size 580 x 450 mm flat back including CI/MS bracket , cutting for pinning in brackets,CP waste coupling 32mm dia, PVC waste pipe, 15mm bore PVC connection, 15mm bore fancy type CP pillar tap ,chain, plug and porcelein stopper complete all as specified.

Supply and fixing Grating square 150mm size of PTMT(Minimum weight 100 gms) complete all as specified.

Supply & Fixing vitreous china squatting pan(Orrissa pattern) size 580 x 440 mm white with intregal foot rests, with & including P or S trap including conection to trap and to flush pipe, bedding in PCC 1:7:12 type F-2 etc complete including making good to floor complete all as specified and directed

Supply and fixing Towel Rail 600mm long of PTMT fixed with and including chromium plated brass screws and wooden/ plastic cleats (Minium weight 190 gms) complete all as specified

Supply and fixing soap dish, vitreous china white, approximate size 160x160x90mm complete all as specified

Supply & fixing coloured rotational moulded polythene water storage tanks tripple layer (cylindrical vertical with closed top) hoisted and fixed in postion 500 ltrs capacity and including 20mm dia ball valves, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe minimum weight 210 gram complete all as specified and directed.

Supply and fixing 75 mm bore PVC (SWR) pipes single socketed in any length with rubber joints fixed to walls ro in floor with dash true nut, bolt at every 2 metre length complete all as specified.

Supply & Fixing PVC connection pipe 45 cm long with two brass nuts (union) at ends, for 15 mm dia, complete all as specified and directed.

Supply and fixing in repair vitreous china urinal half stall type white with CP spreader with grating and union for discharge pipe, including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement fixing with brackets, flush pipe, grating and union for discharge pipe complete all as specified and directed.

Material and labour chequered cement concrete coloured tile of size 200mm x200mmx25mm thick gloosy finish with grey cement and pigment as in floor, foot path over and including 15mm thick cement screed bed or bedding layer in CM 1:4 set and jointed in neat cement slurry and pointed with white cement mixed with pigment to match the colour of tiles complete all as specified.

E/M Works Supply & Fixing point wiring for one light point/ fan/ bell (independent) point controlled by one, one way switch with 1.5Sqmm size, PVC insulated and unsheathed 1100volts grade, single core stranded (multistrand) copper conductor (FRLS) PVC cable drawn into & including medium grade PVC conduit (not less than 20mm outer dia ) with all fittings and accessories fixed concealed (including chase cutting in brick/ stone masonry walls for fixing conduit and plastering and whitewash/colouring the external surface and matching the same with existing surface) and sunk cast iron or pressed steel terminal boxes for mounting fittings like switches, sockets & fan regulators etc with 3 mm thick plastic laminated sheet covers fixed with brass screws and cup washers including one continuous run of PVC insulated (green colour) 1.5 Sqmm multistranded copper conductor cable earth wire and connected to earth dolly complete all as specified and directed (Note:- wiring shall be done in colour coding as directed by Engineer in charge.

All as per item No.82 herein before but one socket outlet 5 pin 5 amps controlled by one switch on same board.

All as per item No. 82 herein before One socket outlet 5 pin 5 amps controlled by one switch on independent board.

All as per item No 82 herein before but wiring with 2.50sqmm copper wire (FRLS) PVC and 1.5 sqmm earth wire for socket outlet 6 pin 16 amps or AC socket on independent board.

Suppy & Fixing switch piano flush type single pole, one way 5 Amp complete all as specified and directed.

Supply & Fixing switch piano flush type single pole, one way 15 Amp complete all as specified and directed.

Supply & Fixing socket out let 2 in1, 3 pin, 5 Amp, piano,flush type complete all as specified and directed.

Supply & Fixing socket out let 2 in1,3 pin, 5 and 15 Amp, flush type complete all as specified and directed.

Supply & Fixing ceiling rose, PVC/ Poly carbonate, isolated body three terminal complete all as specified and directed.

Supply & Fixing lamp holder angle type PVC/Poly carbonate type insulated body with back plate suitable for batten/wall fitting complete all as specified and directed.

Supply and fix High quality LED lighting fixture with co extruded polycarbonate body, complete with polycarbonate/glass tube, 5 Watt suitable for mirror light internally pre wired of 1.5 sqmm twin twisted flexible cable complete all as specified & directed. Make C&S Cat part No LTTB1F5WLED/W or equivalent Cat part in Make specified in particular specification

Supply and fix LED bulk head fitting, 1x10 watt with PDC aluminium housing and milky diffuser complete with all accessories and including connecting up with twin core twisted flexible copper conductor cable with suitable size of 230 volts, 50 HZ complete all as specified & directed. Make C&S Cat part No LTB10WLED or equivalent Cat part in Make specified in particular specification

Supply and fix LED CRCA batten complete with retrofit T8 polycarbonate/ glass tube indoor type tube light 20 watt with aluminium extrusion in 'D' shaped have large diametre for increased convection heat transfer included one LED tube rod and driver, internally prewired of 1.5 sqmm twin twisted flexible copper conductor cable complete all as specified & directed. Make C&S Cat part No LTDC01220WLED/WD1 or equivalent Cat part in Make specified in particular specification

Supply, laying , jointing & testing of XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 16 Sqmm 2 core laid in duct/trenches/along pole etc,making connection complete all as specified. Note : 1. The cost of Al thimbles/lugs etc is included in quoted rate and no extra payment will be made for the same. 2. Excavation, earth work, sand cushioning and brick protection will be measured and paid separately under respective items

Material & Labour for brick protection with sub-class 'B' bricks (old size) laid dry, flat in trenches over cable with longest dimension perpendicular to the axis of the cable complete all as specified and directed.

Material and labour for sand cushioning with a layer of fine sand 8 cm thick before laying the cable and 15 cm after laying the cable in trenches to cover under ground cable complete all as specified and directed. Note :-Punned down thickness of sand shall be considered for measurement)

Supply and fixing / laying of galvanized iron pipe of 32 mm nominal bore light grade for cable protection, fixed to pole/ alongwall/ floor/ under road/ across the drain or nallaha etc with clamps nuts, bolts and washers complete all as specified and directed. Note : The cost of MS clamp, nut, bolt, washer and GI fittings etc shall be included in the item rate.

Supply & Fixing sheet metal enclosure for DBs(double door type) single pole and neutral 8 way including blanking plate as required with 200 Amps rated bus bar, 240 volts fixed sunk/flush to the wall or niche complete all as specified and directed .

Supply & Fixing Exhuast fan metal body, 230 volt, 900 rpm,single phase , 300mm size, with louvers fixing in openings of wall , grounting of suitable size of nuts & bolts for exhaust fan and making good distrubed surface , connecting flexible cable 3 core 0.50 Sqmm copper conductor , flexible wire from ceiling rose to exhaust fan complete all as specified and directed .

Supply & Fixing MCB single pole, 240 volts, 6 to 32 Ampere, rupturing capacity 10 KA, ‘B’ curve type complete all as specified and directed.

Supply & Fixing MCB single pole & neutral , 240 volts, 40 to 63 Ampere, rupturing capacity 10 KA, ‘B’ curve type complete all as specified and directed.

Supply & Fixing LED Bulb 10 watt complete all as specified and directed.

Material and labour for earthing complete with galvanised earth plate electrode 600 X 600 X 6 mm thick burried directly in ground (earth pit not less than 2.25 m below ground level) with top edge of earth plate not less than 1.5 m below normal ground level, connected to galvanised earth lead wire 4 mm dia by means of nuts, bolts, check nuts & washers of galvanised iron or steel all as shown on electrical plate No. 3 of MES schedule 2009, Part – I (Specifications) and connected to main switch board / main DB’s / earthing test point including all necessary excavation and earth work in any type of soil, adequate quantity of charcoal dust & common salt all around the earth plate minimum 150 mm in all directions with & including watering pipe 20 mm dia GI medium grade, GI funnel made out of 0.63 mm thick GI sheet, wire gauge, 50 mm thick RCC cover in PCC 1:2:4, type B-1 (using 20 mm graded crushed stone aggregate), duly reinforced with 6 mm dia mild steel round bars @ 150 mm both ways center to center with suitable lifting handle to cover, earth pit of PCC 1:3:6 type C1, GI protection pipe 15mm dia light grade up to 7.5mtr from electrode GI pipe to be fixed with complete all as specified and directed. Note :- (i) Earth lead beyond 7.5 mtr from electrode to earth terminal point/main switch & GI pipe light grade 15mm dia for protection against mechanical damage to lead shall be measured separately. (ii) On testing after completion if desired earth resistance is not obtained, the earthing will be redone at no extra cost.

aditya construction

KUMAON VALLEY CONSTRUCTION