ADDN/ ALTN TO CERTAIN OMQs AT AF STN AMBALA UNDER GE (AF) AMBALA

Demolition of brick work built in CM including all quions arches, pillar etc complete all as specified and directed.

M&L for brick work with old size sub class ‘B’ bricks,straight or curved on plan to any radius built in cement mortar (1:4) complete all as specified and directed.

M&L for brick work with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 etc complete all as specified and directed .

Taking down Cement plaster on brick or stone walls incl raking out joints hacking for key & scrubbing down with water etc complete all as specified and directed.

M&L for Rendering 15mm thick on fair faces of brick work or concrete surfaces, finished even and fair on walls in cement mortar (1:4), using water proofing compound complete all as specified and directed. NOTE: WPC will be measured and paid for separately

M&L for rough cast plastering over and incl 10 mm thick rendering in cement mortar 1:3 and while it is still in plastic state the roughcast mixture consisting of crushed stone or fine gravel aggregate (which is generally of size between 6 to 12 mm depending on the texture required) mixed with coarse sand and cement in the ratio of 1: 1: 1 shall be applied and finished even. The mix of cement and sand shall be made slightly wetter than normal for rendering to ensure that larger aggregates are thoroughly covered. Rough cast plaster shall be applied as specified clause 14.22 of SSR Part-I . complete all as specified and directed.

Supply only liquid water proofing comound ISI Marked complete all as specified and directed.

M&L for 5 mm thick cement plaster in CM 1:3 as in soffits of slabs/Chajja/ Sunshade finishing the plastered surface even & smooth without using extra cement etc complete all as specified and directed .

M&L for providing and applying plaster of paris putty of 2 mm thickness over plastered surface or unplastered surface to prepare the surface even and smooth complete all as specified and directed.

M&L for three coats of white lime wash on new plastered surfaces of ceiling including preparation of surfaces complete all as specified and directed.

M&L for two coats of cement base paint on newly plastered wall surfaces incl preparation of surfaces over a coat of primer with alkali- resistant priming paint complete all as specified and directed.

M&L for Complete removal of existing treatment of wall Old plastered surface of Two coats Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete , as per manufacturer's specification. complete as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Demolition of Cement Conc. as in G.F & paving not exceeding. 15cm thick (above or below G.L.), complete all as specified and directed.

M&L for 25mm thick cement concrete Type B1 1:2:4 (12.5mm graded mechanically crushed stone aggregate) as in floor finished rough to recieve floor finishes etc complete all as specified and directed.

M&L for non skid coloured ceramic tiles 400 x 400 x 7 to 8 mm set & jointed with neat cement slurry & pointed in white/coloured cement to match the tiles over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

M&L for glazed ceramic coloured tiles 450x350x7 mm thick on vertical surface such as skirting , dado etc. over 10 mm thick backing coat plaster in CM 1:4 complete all as specified and directed.

M&L for 40 mm thick cement concrete type B-1 , 1:2:4 (20 mm graded mechanically crushed stone aggregate) as in PCC flooring including spike rolling to surfaces or making impressions of expanded metal, whilst the concrete is green complete all as specified and directed.

M&L for Glass dividing strips, 3mm thick and inserted in position to conform to design and width of strip 38mm complete all as specified and directed.

Taking down chowkhats or frames not exceeding 1.5 sqm (without taking off shutter from the frame) each and removing from the site including dismantling brick work for hold fasts etc, complete all as specified and directed.

Taking down chowkaths or frames exceeding 1.5 sqm but not exceeding 4 sqm (without taking off shutter from the frame) each and removing from the site including dismantling brick work for hold fasts etc,. complete all as specified and directed.

S& F Pressed steel frames of size 125 x 60 mm for doors with one or more rebates including fixing lugs, 125 mm size hinges, lock strike plate, etc., and making good the disturbed surface including necessary brickwork and cement plaster complete all as specified and directed.

S&F 40mm thick Flush shutters, solid core construction, with Particle board core and plywood face panels, commercial type on both sides compplete all as specified and directed.

S&F 35 mm thick factory made glazed & skeleton shutter of IInd class H/Wood open rebated & prepared to receive glass or gauze etc without sash bar open rebated with edges of framing plain, chamfered or rounded, fitted with cut & mitred beads for securing glass or guage etc size ofstiles rails etc as specified in sec 8 clause 8.24 (a) of SSR Part-I (2010), complete all as specified and directed.

S&F solid PVC door frames of size 50mm x 47 mm made out of 5mm wood grain printed PVC sheet reinforced with MS square tube, supply & fixing in opening as per specification & drawing and making good the disturbed surface including necessary brickwork and cement plaster complete all as specified and directed.

S&F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification colour WOOD COLOUR, complete all as specified and directed.

S&F Factory made box type steel windows double shutter with pressed steel frame complete including mild steel acessories like lugs, door stopper, holdfasts, pintol hinges, handle (minimum one for each shutter) and ISI marked tower bolt 150mm size (minimum 2 for each shutter) etc. with or with out glazing bars dovetailed or welded with one coat of zinc chromate primer, complete all as shown on drawing No. TD-276 (R) Sheet No 1/4 to 2/4 , 3/4 ,4R/4 and as specified and directed by Engineer-in-Charge. Note: (i) Fabrication as per TD-276 (R) SH 1/4 to 2/4, 3/4 ,4R/4 (ii) The PCC back filling in chowkhat of window, sheet glass and wire gauge will be measured and paid separately against respective items.

S&F Factory made steel window/Ventilator fixed type (fabricated from P-tube section as shown on drawings) including necessary mild steel acessories etc. with glazing bars dovetailed or welded with one coat of zinc chromate primer, complete all as specified and directed. as shown on No. TD-220 sheet No 3/3. complete all as specified and directed.

S&F stainless steel butt hinges 100 mm long medium weight complete all as specified & directed.

S&F aluminium anodised extruded fabricated type handle 100mm long complete all as specified & directed.

S&F 150 mm long Aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified & directed.

S&F Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) 300 mm long and fixing with bolts extruded sections complete all as specified & directed.

M&L for PCC 1:3:6 type C-1 (20 mm graded mechanically crushed stone aggregate) as in filling pressed steel frame /hold fast blocks etc complete all as specified and directed.

S&F Mild Steel Framed work such as in Gates, coverings, Guard Bar/grill welded to window frame or fixed independantlys, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified & directed.

S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F Plain Sheet glass 4 mm thick, ordinary quality and glazing with linseed oil pane putty & spring glazing clips, in squares not exceeding 0.5 Sq. mm in each pane, complete all as specified and directed.

S&F 4 mm thick figured glass pin head type and glazing with oil putty in sq not exceeding 0.5 sqm each complete all as specified and directed.

M&L for preparation of new wooden surface of any description not otherwise described over 10cm width or girth and applying two coat of synthetic enamel paint over one coat of pink primer complete all as specified and directed.

M&L for painting to steel surfaces of any description not other wise described over 10cm width or girth with two coats of synthetic enamel paint including preparation of new surfaces complete all as specified and directed by Engr-in-charge

S&F 300 mm MS ordinary rat tail rod pattern springs incl roller and roller plate fixed to wooden chwkhats or welded to angle iron door frames. complete all as specified and directed.

M&L for Preparation of old painted wooden surfaces of any description not otherwise described over 10cm width or girth and applying two coat of synthetic enamel paint complete all as specified and directed.

M&L for Preparation of old steel surfaces of any description over 10cm width or girth not other wise described applying two coats synthetic enamel paint complete all as specified and directed.

S&F 100mm long hasp and staple type Aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws. complete all as specified and directed.

S & F stainless steel curtain rod 25mm dia having wall thickness 1.6mm fixed with and including stainless steel decorative brackets, two lotto for each road length at both end etc as in repair complete all as specified and as directed by the Engineer-in-Charge.

S&F stainless steel plate rack standard size 1000mmx750mm mm complete and fixing with rawl plug and steel screws of wt not less than 8kg each complete all as specified and directed.

S & F rubber strips 3 to 4mm thick & 65mm to 75mm wide fixed on bottom rail of door for covering gaps between door & floor to avoid entry of insects,dust etc complete all as specified and directed.

S&F 150 mm overall length of cover plate Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed.

Taking down of Eaves gutter/rain water pipe( AC rain water pipe /SWR pipe line of any size or pattern), incl all fittings, complete all as specified and directed.

Demolition and breaking up 150 mm bore drain pipes (salt glazed stone ware pipes) set in cement mortar complete all as specified and directed.

Taking up or down steel tubing and connections of 15mm bore in pipe, including cleaning for re-fixing or removal from site complete all as specified and directed.

Taking up or down steel tubing and connections of 20mm bore in pipe, including cleaning for re-fixing or removal from site complete all as specified and directed.

S&F GI tubing medium grade 15 mm dia including fittings, cutting threading and fixing to walls or fixing in concealed walls or in floors etc, and making good the surfaces matching to exsiting surafaces of walls/ floor to the entire satisfaction of complete all as specified and directed.

S&F GI tubing medium grade 20 mm dia incl fittings, cutting threading and fixing to walls or fixing in concealed walls or in floors etc, and making good the surfaces matching to exsiting surfaces of walls/ floor to the entire satisfaction complete all as specified and directed.

S&F in repairs, Vitreous china wash down water closet pan (Pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe, P or S trap,) complete all as specified and directed.

S&F in repair vitreous china wash hand basin white flat back of size 550x440mm including CI brackets , chromium plated waste coupling, waste pipe etc.,complete all as specified and directed. (incl all waste fittings)

S&F in repair pillars taps fancy type chromium plated cast copper alloy with capston head long screwed shanks of 15mm bore complete all as specified and directed.

S&F in repair Bib tap, cast copper alloy, chromium plated, fancy type, screwed down, high pressure, suitable for 15 mm bore pipe, complete all as specified and directed.

S&F in repairs stainless steel grating openable 100mm sqmm size with/without hole including fixing with white cement complete all as specified and directed.

S&F in repair angle valve cock chromium plated fancy type 15 mm bore with flange make L & K code No 077A or equivalent complete all as specified and directed.

S&F in repair chromium plated Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions, all as specified, of 20mm bore. complete all as specified and directed.

S&F in repair fancy type shower rose 125mm dia size of Rim and 30cm long CP brass pipe with swivel joint in complete all as specified and directed.

S&F sheet glass shelf assembly consisting of 5.5 mm th sheet glass shelf 12 cm wide with chromium plated guard and railing 60 cm long complete all as specified and directed.

S&F Soap dish any type, fixed to plugs with chromium plated brass screws complete all as specified and directed.

S & F in repair chromium plated, towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed.

S&F PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

S&F in repair sinks made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm, waste pipe complete all as specified and directed.

S&F in repair 10 ltr capacity PVC valveless, syphonic action type flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, 32 mm dia flush pipe complete all as specified and directed.

S&F PVC cabinet with looking mirror of size 350x450mm complete all as specified and directed.

S & F 75mm bore cast iron bends any radius with oval access door. complete all as specified and directed.

S & F for CI Bends (any radius) with duck's foot or heel rest 75mm complete all as specified and directed.

S&F 100mm bore sand cast and waste and vent pipe in any length with or without ears laid in trenches or in floor complete all as specified and directed.

M&L for Concrete bed to drain pipes of 100mm bore including packing under and hauching against the sides of pipes after they are laid and tested in PCC 1:3:6 type C2 complete all as specified and directed.

S&F CI floor traps complete 75mm bore outlet including jointing to waste pipe fixed in cement concrete type B1 1:2:4, complete all as specified and directed.

S&F cast iron P or S trap 100 mm bore complete all as specified and directed.

S&F Cast Iron vent cowl 100 mm bore size complete all as specified and directed.

S&F PVC(SWR) bends, for 110mm bore pipes, with access doors, complete all as specified and directed.

Dismantling old unserviceable cement concrete/PVC water tanks of capacity exceeding 250 ltrs & not exceeding 500 Ltrs including supplying & fixing of PVC water storage tank 500 ltr capacity HDPE triple layered ,white colour cylindrical type fixed and hoisted in position on roof at any height complete with inlet/outlet of 20 mm GI Pipe connection incl locking arrangement, including supplying & fixing of Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe 20 mm dia and (Minimum weight 20 mm - 210 gms ) fixed as in repairs complete all as specified and directed. Note : (i) Inlet, outlet & wash out pipe will be measured paid for separately.

M&L for salt-glazed stoneware gully traps,150x150 square or round mouthed, type "P" setting and jointing to drains with cm 1:1 complete all as specified and directed.

M&L for precast concrete cover slabs for drain man hole/drain etc. in (1:2:4) type B-1 using 20 mm mechanically crushed graded stone aggregates set in CM (1:6) complete all as specified and directed.

Demolition of cement concrete unreinforced of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L for, 75 mm thick PCC (1:3:6) C-2 using 40mm graded mechanically crushed stone aggregates in path/plinth protection finished even & smooth completed without using extra cement complete all as specified and directed.

Dismantling of RCC posts or struts (wood, steel or RCC) in any section, in fencing, including taking out embedded portion and making good disturbed ground complete all as specified and as directed by the Engr-in-charge Note post shall be embedded in natural ground.

Taking down existing barbed wire fencing of any description and removing the unserviceable wire from site complete all as specified and directed.

Dismantling mild steel work of any description and in any position complete all as directed by Engr-in-Charge.

Excavating in trenches, not ecxceeding 1.5 m wide and not exceeding 1.5 m in depth; for foundation, etc. or for boundary wall, shafts, wells, cesspits, manholes, pier holes, etc.not exceeding 10 sq m on plan and not exceeding 1.5 m in depth and getting out in soft/loose soil etc incl post holes for fixing fencing posts etc complete all as specified and directed.

Returning filling in trenches including spreading,levelling,watering and well ramming in layer not exceeding 25 cm. as diracted by engr-in -charge

Removing excavated soil exceeding 250m but not exceeding 500m and depositing where directed by Engr-in-Charge

M & L for Framed work as in doors or gates (ornamental type) of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete conforming to Fe-410-W(Gde- E-250) quality-A, complete all as specified and directed.

M & L for Brick work with sub class ‘B’ bricks, straight or curved on plain exceeding 6 metre mean radius in cement mortar (1:6), complete all as specified and as directed by the Engineer-in-Charge

M & L for preparation of new steel and iron surfaces of any description over 10cms width or girth & applying 2 coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

M&L for cement concrete type D2 1:4:8 using 40 mm graded mechanically crushed stone aggregate as in foundation filling or mass concrete complete all as specified and as directed.

M&L for PCC 1:2:4 type B2, including necessary formwork using 40mm graded crushed stone aggregate, as in copings, surface channels and drains etc including necessary formwork and weathering, slightly rounded or chamfered angles and throating complete all as specified and directed by Engr-in-Charge

M & L for precast reinforced cement concrete jali (1:2:4) type B1 using 20 mm graded mechanically crushed stone aggregate as in covering ,complete all as specified and directed.

M & L for mild steel TMT bar 10mm dia and over cut to length, bent to shape required including cranking bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

S&F in repair Pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm for covring of gates,shed etc of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws etc complete all as specified and as directed by Engr-in-charge.

Please Enable Macros to View BoQ information