R/M of Streets, drains, retaining walls in W. No. 5 from Shankutla house towards Durga mata Temple.

Amount

Excavation in soil in Hilly area by manual/Mechanical means in all kinds of soil such as pick work, jumper work, blasting work both in soft and hard rock with chiseling/wedging out rock (where blasting is prohibited) and other intermediate classification of soil including cutting and trimming of side slopes and disposal of unserviceable material by mechanical transport and stacking the serviceable/ useful material on road berms as per technical specification clause 1603.1,1603.2 or directed by the Engineer-in-charge. The work shall be executed in workman like manner and avoids any damages to the private/ Govt. property in the vicinity of work site, if damage access any property during the course of execution shall be the absolute responsibility of the contractor which shall have to be duly compensated by him in all cases.

Providing and laying mechanical mixed cement concrete 1 : 6 : 12 (one cement : six sand : twelve graded crushed stone aggregate 40 mm (Forty millimetre) nominal size and curing complete excluding cost of centering and shuttering in foundation and plinth.

Providing and laying cement concrete 1:5:10 (One cement : five sand : ten graded stone aggregate 40mm (Forty millimetre nominal size) with 15% (Fifteen percent) plums and curing complete including the cost of formwork for plain/reinforced concrete in retaining walls, breast walls, the size of plum should be 150 to 300mm (One hundred fifty to three hundred millimetre) as per drawing and technical specification including carriage of materials with in all leads, lifts and other incidentals.

Back filling behind R.walls,abutment, wing wall and return wall complete as per drawings and technical specification Clause 1204.3.8. Granular material.

Providing weep holes in brick masonry/ stone masonry/ plain reinforced concrete abutments wing wall, return wall with 100mm PVC pipe extending through the full width of the structure with slope of I (V) : 20 (H) towards drawing face complete as per drawing and technical specifications clause 614, 709, 1203.3.7 as per direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals.

Dismantling of cement concrete pavements by mechanical means using pneumatic tools breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismatled materials upto a lead of 1000m,stacking serviceeable and unserviceable materials separately

Providing and laying cement concrete work 1:2:4 (one cement : two sand : four graded crushed stone aggregate 40mm nominal size) and curing complete excluding cost of form work in foundation and plinth including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in-charge.

Providing and laying RCC Half cut pipe/ channels 250 mm dia in drain complete in all respect.

Steel work welding in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of red lead paint.In gratings framed guard bars, ladders, railing, brackets and similar works.

NAGENDER KUMAR