CERTAIN B AND R REPAIRS TO BLDGS OF E AND M INSTALLATION UNDER AGE B AND R WEST AT GE DEHU ROAD

Amount

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and as directed.

M&L for rendering cement plaster 10 mm thick in CM 1:6 on fair faces of brick walls finished even and smooth w/o using extra cement complete all as specified and as directed.

M & L for Rendering 05 mm thick cement plaster on concrete surface of ceiling in cement mortor 1:3 finished even and smooth without using extra cement complete all as specified and as directed.

M&L for rendering cement plaster 15 mm thick in CM 1:4 on fair faces of brick work or conrete wall surfaces finishing the surfaces even and smooth without using extra cement complete all as specified and as directed.(WPC will be measured sepaetly)

M & L for Preparation of newly plastered surfaces of wall and appling two coats of oil bound distemper over a coat of primer including 3mm thick wall care putty complete all as specified and as directed.

M & L for Preparation of newly plastered surfaces of wall and appling two coats of cement base paint complete all as specified and as directed.

M&L for preparation of newly plastered surfaces of ceiling and applying three coat of white washing complete all as specified and as directed.

Dismantling single layer Mangalore pattern or similar tiles in roofing complete all as specified and directed.

Dismantling of boarding, any description and fixed in any position with nails complete all as specified and directed.

Dismantling plain or corrugated steel sheeting any gauge, any thickness including Nainital or similar pattern roof covering , in wall clading and velley gutters etc complete all as specified and directed.

Dismantling of wrought iron or mild steel work any description and fixed in any position complete all as specified and directed.

M&L for rolled sections as in main and cross beams, hip rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed witjh angle cleats or other connecting plates Fe 410 W (gde E 250 ) quality A including a shop coat of zink chromate primer complete all as specified and as directed.

S & F 0.50mm thick pre painted/colour coated galvalume aluminium zinc coating GI based corrugated steel sheet of any colour in roofing having tensile strength 550 Mpa fixed with self tapping screws all as specifeed.

All as per item No. 13 above but plain sheet fixed in valley gutter / ridge complete all as specified and as directed.

Dismantling wall & ceilling boards(fibre pulp insulation etc) or insulation boards/ slabs/blankets, any thickness including cover fillets complete all as specified and as directed.

S & F 12mm thick Gypsum board for ceiling, insulation and accoustic purpose 60x60cm in size fixed with screws with staples incl aluminium snap grid frame work 605x605 mm in flat/sloping ceiling with aluminium anodised grid work 35.60x23.60x1.60mm main Tee 23.60x23.60x1.60mm cross section and 26x26x1.60mm angle including 3mm dia GI wire suspender of suitable length, aluminium cleats etc complete all as specified and directed.

Taking down chowkats or frame with shutter (w/o taking off shutter from the frame) of area not exc 1.5 Sq.m including making good disturbed surface as per existing.

Taking down shutters of any description exc 1 sq. m and n.exc 2 sq. m each complete all as specified and as directed.

M&L for pressed steel frames for doors with one or more rebates incl necessary fixing lugs, hinges, lock strike plates etc size of frame 105 x 60mm

M&L for cement concrete 1:3:6 type C0 (using 12.5mm graded stone agg) as in door frame filling

S&F 30 mm thick flush shutter solid core construction with block board core & plywood face pannels commercial type on both sides

M&L for painting to wooden surfaces with two coats of synthetic enamel paints over a coat of pink primer including preparation of surfaces etc complete

S&F & fixed 300mm long Aluminium alloy anodised sliding door bolt with hasp staple (bolt type) and fixing clips of sheet cast or extruted section & fixing bolts & sliding blots of extruted sections of cast aluminium alloy

S/F 200mm long Aluminium anodised barrel tower bolt

S/F Aluminium handles fabricated type anodised 150mm

M&L for bands, straps, supports or stays, for rain water, ventilating pipes,etc including bolts, if required hooks (stay) heavy for large gates, hook and pintle hinges large haps and staples; chains; hand made sliding bolts; clamps ; hold fasts; wall ties; hooks for hanging fans' plain angle cleats for securing purlins to wood trusses or raftrs; knee piece inserts; two way and three way straps, plate washers and similar small article confiring to Fe-290 Gde E-165

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises.

M & L for non skid coloured ceramic tiles 7 to 8 mm thick area of each tiles exceeding 0.06 sqm but not exceeding 0.11 sqm , in floors, etc.set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed or bedding layer in cement mortar 1:6 complete all as specified and as directed.

M & L non skid coloured ceramic tiles 7 to 8 mm thick area of each tiles exceeding 0.18 sqm but not exceeding 0.38 sqm , in floors, etc.set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed or bedding layer in cement mortar 1:6 complete all as specified and as directed.

Ditto as per item No 29 above but on skirting over and including 10 mm th rendering in CM 1:4 complete all as specified and as directed.

M & L Glazed ceramic tiles in vertical surface 300mm x200x7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles incl backing coat 10mm thick in CM 1:4 all as direced.

Demolition of cement concrete ( unreinforced) in ground floors and paving n exc 15 cm thickness (below or above ground level) complete all as specified and as directed.

M & L for cement concrete Type C2 1:3:6 (using 40mm graded aggregates) as in plinth protection 75 mm thick finished top surface even and smooth without using extra cement complete all as specified and as directed.

M & L for 100 mm thick Cement concrete type D-2 1:4:8 (40 mm graded aggregate) as in sub base complete all as specified and as directed.

M & L for precast concrete interlocking paver block rubber moulded any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade with grey cement and pigment over and including 25 mm thick sand cushion complete all as specified and as directed.

M & L for Chequered cement concrete tiles of 20 cm x 20cm x 25 mm thick with grey cement and pigment,set and jointed in neat cement slurry in floors including 15 mm thick screed bed or bedding layers in cement mortar 1:6 for laying tiles complete all as specified and as directed.

Demolition of brick work or stone/boulder masonry including all quoins, arches, pillars etc , precast concrete articles and precast concrete block walling built in cement mortar complete all as specified and directed by Engineer-in-Charge.

M&L for pre-cast cement concrete block masonry with solid blocks type C-1 (1:3:6), exc 10 cm in width and setting in mortar 1:6, complete

M&L for PCC (1:2:4) type B-1 (20 mm graded stone aggregate copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and directed by Engineer-in-Charge.

Demolition of cement concrete (reinforced )as in manholes cover complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of New steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

S&F in repairs steel rolling shutters, without ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer,erected in position as indicated, complete push pull or manual type. Complete all as specified and as directed.

M&L for precast Cement concrete cover slabs for man holes (1:2:4) Type B-1 ,set and jointed in CM (1:4) Note:- Reinforcement shall be measured and paid separately.

M&L for mild steel TMT bars 10mm dia and over cut to length, bent to shape required incl cranking, bending, hooking ends & binding with & incl mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed by Engineer-in-Charge.

Dismantling of fencing post or struts (wood, steel, RCC) any section , post embedded in concrete , brick work, masonry etc , including taking out embedded portion and making good distrubed ground.

Dismantling fencing wire mesh, any type complete all as specified and irected.

S&F angle iron fencing post and struts including cutting tops to shape as directed, drilling holes, notching for wire etc , flat iron fillets ( for securing wire mesh etc) including all necessary drilling, bolting or riveting etc and similar work conforming to Fe-410-0 or Fe 310-0 any size complete all as specified and directed.

S&F MS Screw bolts ( machine made) with hexagonal or square heads at one end and screwed the other or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut length exc. 5 cm but not exc 10 cm long, 11 to 15mm dia of shank complete all as specified and directed

Supply only MS galvanised chain link fencing incl line wire and any type of strands, rails, straining bolts etc all complete all as directed.

Fixing only chain link fencing incl line wires, any mesh, size and type to any type of standards, rails, straining bolts etc incl provn of binding wire complete all as directed.

S&F in repair GI two strand, steel barbed wire 2.24mm dia, barbed with 2mm dia barbs @ 75mm spacing and straining and fixing to any type of standard rail, straining bolts, inlc securing or tying at crossing with and provn of galvanised mild steel wire staples or steel pins etc complete all as specified and directed Each line of wire to be measured.)

S&F in repair for framed work uch as grills,grating, etc, with ens of bars shouldered and/or riveted, or forged into spikes,framed gurd bars,barred iron doors, ladders, framed balusters walk ways, railings framework of watertanks and similar work conforming to Fe 290. Gde-E-165 complete all as specified and directed by Engineer-in-Charge.

M/S B.A. GAIKWAD

H S TAKHI

SINGH CONSTRUCTIONS

M/S Sharvi Construction

M/S RENUKA CONSTRUCTIONS