Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹43.4 LAccepted-AOC MAHABHAIRAB PO TEZPUR DISTT SONITPUR ASSAM PIN 784 001 | SONITPUR | ASSAM | 784001 | L1 | Accepted-AOC Lowest bidder | |
| 2 | L2₹43.8 L+₹19,350 (0.44%)Rejected-Finance | L2 | Rejected-Finance Become L2 | |
| 3 | L3₹43.9 L+₹28,910 (0.66%)Rejected-Finance B S ROAD KOLIBARI TEZPUR 784 001 DIST SONITPUR ASSAM | SONITPUR | ASSAM | 784001 | L3 | Rejected-Finance Become L3 | |
| 4 | L4₹44.0 L+₹45,360 (1.04%)Rejected-Finance | L4 | Rejected-Finance Become L4 | |
| 5 | L5₹45.1 L+₹1.5 L (3.48%)Rejected-Finance | L5 | Rejected-Finance Become L5 |
Tender Value
Refer Docs
EMD Value
₹89,900
Closing Date
29 Oct 2021, 6:00 pmClosed
GE South Tezpur
GE South Tezpur Mission Chariali Tezpur
PERIODICAL SERVICES TO CERTAIN BLDG AND REPAIR/REPLACEMENT OF FLUORESCENT STREET LIGHT, FLOOD LIGHTS AND CONNECTED ITEMS AT UNIT 524 AT MISA CAMP UNDER GE (S) TEZPUR
2021_MES_480865_1
8618
Open Tender
Civil Works
Item Rate
240 days
GE South Tezpur
As per NIT
4 documents required · 4 mandatory
₹500
Yes
GE South Tezpur
₹89,900
Yes
11 Dec 2021
9 Oct 2021
1 Nov 2021
9 Oct 2021
29 Oct 2021
22 Oct 2021
Amount
Taking down shutter of any description exc 1 Sqm but n'exc 2 Sqm each.Complete all as specified and as directed.
S & F 35 mm thick flush shutter , solid core construction ,with block board core and plywood face panel ,commercial type on both side.Complete all as specified and as directed.
S/F 35mm thick glazed and skeleton shutters open rebated and prepared to receive glass gauge etc. Divided into squares with plain chamfered or rounded, rebated sash bars, sizes of the members of the shutters as specified in SSR Part I, section 8, clause 8.23(a). Complete all as specified and as directed.
S&F 150mm long aluminium handle, cast type, anodised.Complete all as specified and as directed.
S/F 100mm size MS butt hinges, medium weight, cold rolled.Complete all as specified and as directed.
S&F 200 mm aluminium anodised barrel tower bolt, of extruded section and fixed in position .Complete all as specified and as directed.
S/F 300mm long M.S sliding door bolt, bolt type stove enameled black with bright bolt not less than 12mm dia and including a minimum of six bolts and nuts four on bolt plate & two on staple plate.Complete all as specified and as directed.
S & F Floor door stopper 14cm long of aluminium alloy body and tongue, anodised,with hard drawn steel spring,fixed in repairs in floor.Complete all as specified and as directed.
M &L for 2 coats of synthetic enamelled paint over coat of pink primer on wooden surfaces oves 10cm width or girth including preparation of new surface of any description all as specified and directed
M&L for preparation of old surfaces and applying one coat of Oil bound distemper on wall complete all as specified and as directed by Engr-in- charge
M&L two coats of oil bound distemper over a coat of primer and over 1mm thick layer of wall care putty after complete removal of existing treatment
M&L for preparation of old wooden sufaces of any description not otherwise described, over 10 cm width or girth and applying one coat of synthetic enamel paint of wooden surfaces complete all as specified and as directed
M&L for preparation old painted surfaces of steel and iron surfaces over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed
Taking down cement plaster on brick walls incl racking out joints, hacking key & scrubbing down with water.
M & L 15mm thick rendering in cm(1:4) on fair faces of brick work or concrete surfaces and finished the surface even & smooth with WPC @ 3% by the weight of cement. (WPC Will be measured and paid seperately).
M & L 10mm thick rendering in cm(1:6) on fair faces of brick work or concrete surfaces and finished the surface even & smooth without using extra cement.
Supply only integral water proofing compound(make: Dr Fixit/Pedilite /fosroc) or equivalent
M & L for Finishing walls with Premium Acrylic exterior emulsion paint including priming coat of damp proof primer complete and removal of existing painting complete all as specified and directed
M & L for preparation of old painted surfaces of walls and applying one coat of weather shield exterior emulsion paint complete all as specified abd directed
S&F in repairs 25 mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 20 m m - 210 gm/ 25mm-455gms/ 40mm - 690 gms) all as specified and directed
S/F Galvanized mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperature 1.18 mm fitted with tinned tacles or galvanised wire staples complete all as specified and as directed.
S/F in repair 3mm thick ordinary quality sheet glass in squares n.exc 0.5 sqm in each pane glazing with oil putty complete.
S & F in repairs curtain rails, Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers,clamps etc.
S&F in repairs 10 lits capacity PVC low level flushing cistern including pull chain & flush pipe, connection pipe etc complete all as specified & directed.
S & F in repairs connection 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed
S&F in repairs 15mm bore fancy type chromium plated bib taps with crutch or butterfly handle screwed down for iron pipes.
S&F Vitreous China EWC wash down water closet (padestal pattern, white) including PVC Sheet cover fixed in repair.
S&F in repairs vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) including lime concrete bedding 1:2
S&F in repairs 15 mm bore fancy type chromium plated angle stop valve cast copper alloy, screwed down, high pressure, with crutel or butterfly handle, screwed both ends for iron pipe or for unions.
S&F in repairs pillar taps fancy type with capstan heads, chromium plated, srewed down high pressure, with or without lettered `Hot' or `Cold' with long srewed shanks and fly-nuts, screwed for iron pipe and fixed in 15 mm bore.
S & F in repairs 32mm bore PVC Waste pipe for wash hand basin complete all as directed.
Supply and fixing LED Street lights not less than 25W with a single piece of pressure die cast aluminium housing and secondary optics and individual LEDs for a better light distribution and control with IP66 degree of protection and integrated driver with 10KV surge protection complete as per manufacturer's instructions.Make-Havelles,Cat No-ENDURAPEARLSL25WLED757SASYTOPCMP,Surya ,Cat No-SLEUL25WIP66(LXN) or equivalent make of Phillips/Bajaj/Crompton
Supply and fixing LED Street lights not less than 30 W with a single piece of pressure die cast aluminium housing and secondary optics and individual LEDs for a better light distribution and control with IP66 degree of protection and integrated driver with 10KV surge protection complete as per manufacturer's instructions.Make-Havelles,Cat No-ENDURACITYLITEPLAT PLUSSL30WLED757SASYBOPCSurya ,Cat No-SLEUL30WIP66(LXN) or equivalent make of Phillips/Bajaj/Crompton
Supply and fixing LED Street lights not less than 60W with a single piece of pressure die cast aluminium housing and secondary optics and individual LEDs for a better light distribution and control with IP66 degree of protection and integrated driver with 10KV surge protection complete as per manufacturer's instructions.Make-Havelles,Cat No-ENDURAPEARLNEOSL60WLED757PASYTOPC Surya ,Cat No-SLEUL60WIP66(LXN) or equivalent make of Phillips/Bajaj/Crompton
Supply and fixing in replacement of LED flood light fitting light not less than 70 watt with IP66 protection new generation energy saving very high efficiency,enviormental friendly ,long life with fixing accessories such as braket made out by GI strip ,nutts bolts and washer complete making all connection all as specified and directed. Make-Havelles,Cat No-JETA PROFL70WLED757LTG ,Surya ,Cat No-SLEFL70WIP65RFOOD or equivalent make of Phillips/Bajaj/Crompton
M & L for making swan neck end size of not exc. 32mm GI pipe for mounting street light at top of existing LT pole including Clamp, cutting, welding, reaming, finishing ,bending in appropriate size at existing location as directed .
Material and labour for painting to steel tubular pole 3.0 metre long with two coats of synthetic enamel paint from ground level in 3 step of 15 cm alternative black and yellow strips and remaining portion with alluminium paint and MS frames like channel,clamps, angle, D-clamps etc with two coats of aluminium paint complete all as specified. Note.1:-The contract sum shall be arrieved at after deducting amount of schedule of credit from the total quated amount. Note 2-Contractor's supervisor and main worker would wear shirt/T-shirt of colour sky blue/brown/yellow preferable embosed with contractor's firm name while carriying out any activities in defence area for better check of security purpose.
M/S Deep-Jeet
Anil Kumar Sarmah
Chinmay Traders
M/S M N ENTERPRISE
M/S Manjit Singh
THE BUILDERS
M/S Jiban Krishan Das and Co
M/S MOHANPASARI
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .